JZ Microphones
JZ Microphones The Amethyst
Elegir opciones
JZ Microphones The Amethyst is a large-diaphragm condenser with a 25 mm Golden Drop capsule, a cardioid pattern and a discrete Class A amplifier. At 350 g and 168 × 63 × 41 mm it is noticeably smaller and lighter than the rest of the range.
A vocal that sits in the mix without EQ
The Amethyst is voiced for a full, warm tone that keeps its air at the top — a Pro Audio reviewer placed it in the situations where a U67 would normally come out. In practice the midrange is dense without the nasal build-up around 800 Hz to 1 kHz, and the top does not need a shelf. Across several vocal sessions a day, the difference comes down to how many EQ bands you have to open on every channel.
A light body that fits where others will not
350 g is a weight even a light boom stand will hold without extra counterweight and without the arm sagging during a take. That matters when miking an acoustic guitar around the twelfth fret, or on piano where the microphone has to come in under the lid at a steep angle. One practical note: the external shock mount is not part of the standard package.
KEY FEATURES
- 25 mm Golden Drop capsule, cardioid pattern
- Discrete Class A amplifier circuit
- 7 dB(A) self-noise, 127 dB dynamic range
- 350 g — the lightest body in the range
- Applications: vocals, acoustic instruments and strings, grand piano
- External shock mount available separately
TECHNICAL SPECIFICATIONS
- Transducer type: electrostatic, pressure gradient
- Polar pattern: cardioid
- Active diaphragm diameter: 25 mm
- Frequency response: 20 Hz – 20 kHz
- Sensitivity at 1 kHz: 21 mV/Pa
- Output impedance: 50 Ω, rated load above 1000 Ω
- Maximum SPL: 134 dB (2.5 kΩ, 0.5% THD)
- Signal-to-noise ratio: 87 dB-A, noise level 7 dB-A
- Dynamic range: 127 dB
- Power: +48 V phantom, under 2 mA current draw
- Output connector: 3-pin male XLR
- Dimensions: 168 × 63 × 41 mm, weight 350 g
