IsoAcoustics
IsoAcoustics V120 C-Bracket
Cantidad:
Elegir opciones
Cantidad:
Cantidad:
IsoAcoustics V120 C-Bracket – a steel bracket that positions a speaker facing downward, with up to 45° of upward tilt, for ceiling-mounted V120 installs.
Ceiling-mounting a reference monitor calls for different geometry than a wall install – the speaker needs to aim down at the mix position rather than forward, the way a typical wall mount does. The C-Bracket is built for exactly that scenario, unlike the L-Bracket, which positions the speaker facing forward with downward tilt – two different brackets for two different install scenarios, and picking the wrong one means swapping it out after the fact.
Correct geometry for ceiling mounting
The C-Bracket positions the speaker facing downward and allows up to 45° of upward tilt, letting you aim the monitor's acoustic axis precisely at a listening position below. That matters in rooms with higher-than-standard ceilings, where without enough tilt range the speaker's axis would miss the listening spot entirely, throwing off balance and imaging in the mix.Fast swaps without reconfiguring the whole install
The bracket connects to the V120 isolation mount through a slide-in fitting, letting you remove or attach the C-Bracket without unbolting the entire assembly from the ceiling. On a ceiling install, the distance between the V120 mount and the speaker runs to roughly 160mm, worth factoring into room-height planning – in lower rooms, that figure can eat into the clearance between the speaker and the engineer's sightline.KEY FEATURES
- Positions the speaker facing downward for ceiling mounts
- Adjustable upward tilt up to 45°
- Slide-in connection for fast fitting into the V120 system
- Sturdy steel construction
- Requires a separate adapter matched to the speaker's hole pattern
- An alternative to the L-Bracket for forward-facing installs
TECHNICAL SPECIFICATIONS
- Material: steel
- Speaker orientation: facing downward
- Tilt adjustment range: up to 45° upward
- Connection type to V120: slide-in fitting
- Speaker-to-V120 distance: approx. 160mm
- Dimensions: 255 x 25.5 x 105mm
- Weight: 0.7kg
