Grace Design
Grace Design AliX-BK Instrument DI/EQ/Boost
Elegir opciones
Grace Design AliX-BK is a single-channel preamp, EQ, DI and boost for acoustic instruments in a rugged, floor-based chassis in black. Based on the studio m101 preamp path, the AliX brings that same audio quality to the stage, combining an extensive EQ, switchable input impedance and a transformer ISO DI output in one complete tool for the demanding instrumentalist.
Full control over the tone of a pickup-equipped instrument
Every pickup system — piezo, contact, magnetic or active — has different impedance requirements, and a mismatch robs the instrument of its naturalness. The AliX has a 3-position input impedance switch (330 kΩ, 1 MΩ, 10 MΩ) matching the preamp to a specific pickup. An extensive EQ with Low and High shelving bands and a fully parametric mid (70 Hz to 8 kHz, Q control) plus a high-pass filter with notch mode let you precisely tame feedback and match the sound to the room's acoustics.
Ready for the stage and the pedalboard
Playing live, a musician needs a clean signal to FOH, a solo boost and simple operation in the dark. The AliX integrates this into one pedal: a transformer isolated DI output with low noise, a separate level-controlled amp output, a dedicated tuner output active when muted, and Mute/Tune and Boost footswitches with a variable boost up to 10 dB. A 9 V DC / 500 mA power output lets you power a tuner and effects directly from the AliX, and a universal 100-240 V supply with an IEC cable works worldwide.
KEY FEATURES
- Single-channel preamp, EQ, DI and boost for acoustic instruments
- Signal path based on the studio m101 preamp
- 3-position input impedance switch: 330 kΩ, 1 MΩ, 10 MΩ
- EQ: Low and High shelving plus parametric mid with Q control
- High-pass filter 12 dB/octave with notch mode
- Transformer isolated ISO DI output with low noise
- Mute/Tune and Boost footswitches with variable boost up to 10 dB
- Dedicated tuner output active when muted
- 9 V DC / 500 mA power output for powering effects
- FX loop, phase switch and ground lift
TECHNICAL SPECIFICATIONS
- Manufacturer: Grace Design
- Type: single-channel preamp / EQ / DI / boost for acoustic instruments
- Colour: black
- Input impedance: 330 kΩ / 1 MΩ / 10 MΩ (switchable)
- EQ: Low and High shelving, parametric mid 70 Hz-8 kHz with Q control
- Filter: HPF 20 Hz-1 kHz, 12 dB/octave, notch mode
- Boost: variable up to 10 dB, footswitch controlled
- Components: 0.5% thin film resistors
- Outputs: isolated transformer DI (XLR), amp output, tuner out
- FX loop: TRS insert
- Microphone power: 12 V (line mode) for electret mics
- Power output: 9 V DC / 500 mA (2.1 mm center negative)
- Power: universal 100-240 V AC, IEC cable
- Manufacturer warranty: 5 years
