Dynaudio
Dynaudio 18S Dual 9 inch Active Studio Subwoofer 500 W
This item is available on a custom order basis only
Please contact us for more details.
Contacta con nosotrosElegir opciones
This item is available on a custom order basis only
Please contact us for more details.
Contacta con nosotrosThis item is available on a custom order basis only
Please contact us for more details.
Contacta con nosotrosDynaudio 18S is a sealed active studio subwoofer with two opposed 24 cm drivers and a 500 W amplifier. It reaches down to 16 Hz, and DSP modelling matches it acoustically to Dynaudio Pro studio monitors from BM Classic and LYD upwards, turning a two-way system into a three-way set-up.
Low end matched to your monitors
The hardest part of adding a sub is blending it with the monitors without a hole or a hump around the crossover. Dynaudio measured its monitors and stored a dedicated performance map for each in the 18S: you pick your model in the menu and the sub tailors the roll-off itself. Presets cover BM6 Classic, BM15 Classic, BM5 mkIII, LYD 5, LYD 7, LYD 8, LYD 48 and M5P, and new models are added through firmware updates. With a pair of LYD 48 you effectively get a four-way monitoring system. Time alignment is set by entering the distance from sub to speakers, and the 18S corrects delay and phase automatically.
Accuracy in a less than perfect room
A three-filter parametric EQ lets you tame specific room modes that skew the low end of your mixes. The new MSP+ Hybrid Drive units use an aluminium cone with paper backing and an MSP dust cap, balanced for subwoofer duty, and the opposed layout minimises mechanical vibration of the cabinet. XLR and RCA inputs and outputs, an adjustable high-pass for the satellites, auto power on and daisy-chaining several subs with volume controlled by the first one make larger systems easy.
KEY FEATURES
- Two opposed 24 cm (9 inch) MSP+ Hybrid Drive woofers
- 500 W Class D amplifier
- Sealed cabinet, extension down to 16 Hz
- DSP presets for Dynaudio Pro monitors, expandable via firmware
- Time and phase alignment by distance
- Three-filter parametric EQ for room modes
- Adjustable low-pass and satellite high-pass filters
- Auto on/off and daisy-chaining of multiple subs
TECHNICAL SPECIFICATIONS
- Woofers: 2x 24 cm (9 inch) MSP+ Hybrid Drive
- Amplifier power: 500 W
- Frequency response (85 dB +/-3 dB): 16 to 230 Hz
- Max SPL: 110 dB
- Cabinet: sealed
- Low-pass filter: adjustable or preset
- High-pass filter: adjustable
- Phase: 0/180 degrees
- Analogue inputs: 2x balanced XLR, 2x RCA
- Analogue outputs: 2x balanced XLR, 2x RCA
- Power: 100 to 120 V / 200 to 240 V, 50/60 Hz
- Power consumption: max 490 W, standby 0.5 W
- Dimensions (W x H x D): 447 x 300 x 268 mm
- Weight: 22.1 kg
