Bose L1 Pro32 – the most advanced line array pole in the L1 Pro range, with 32 straight-mounted 2" drivers delivering 180-degree horizontal coverage and the most focused vertical pattern in the L1 family. It pairs with a Sub1 or Sub2 subwoofer over a SubMatch cable to form a modular system for medium-to-large weddings, clubs, and festivals.
0-degree vertical dispersion – a focused throw instead of energy bleeding into the room
Unlike the J-shaped L1 Pro16 pole, the L1 Pro32's straight array of 32 drivers holds close to zero vertical dispersion, so sound energy doesn't leak into the ceiling or floor and stays aimed at the audience across the length of the room. For an engineer, that means higher SPL over distance and fewer feedback problems on stages set close to walls or low ceilings – common in clubs and wedding venues. 180-degree horizontal coverage lets one pole fill a room without dead zones off to the sides, and a pair of L1 Pro32 units can handle a crowd of up to 350.
A modular rig with a choice of Sub1 or Sub2 instead of one fixed configuration
The L1 Pro32 is sold separately from its subwoofer, so an engineer pairs it with the lighter Sub1 for smaller, intimate gigs, or the Sub2 where a festival or outdoor wedding needs deeper, louder bass – without buying a new pole when the scale of the job changes. SubMatch connectivity carries power and audio between the sub and the pole over a single cable, and the column itself splits into two sections weighing under 7 kg each, both fitting together in a padded case – one person can move the whole system from the car to the stage in one or two trips.
KEY FEATURES
- 32 straight-mounted 2" drivers in a line array, 180-degree horizontal coverage
- The most focused vertical pattern and highest SPL over distance in the L1 line
- Compatible with the Sub1 or Sub2 subwoofer via SubMatch connectivity
- Three-channel digital mixer with 48V phantom power, EQ, and reverb
- Bluetooth streaming with AAC codec
- ToneMatch RJ-45 port for an optional T4S/T8S mixer
- Wireless mixer control via the Bose Music app
- Two-section pole, each part under 7 kg, with a padded carry case included
TECHNICAL SPECIFICATIONS
- Transducers: 32 × 2" high-excursion neodymium driver
- Horizontal coverage: 180°
- Nominal vertical coverage: 0°
- Amplifier power: 480 W for high-mid array transducers
- Inputs: 2 × combo XLR/1/4" with phantom power, 1 × 1/8" TRS, 1 × 1/4" TRS, Bluetooth
- Output: 1 × balanced XLR line output
- Assembled dimensions (pole + power stand): 213.5 × 34.5 × 55 cm
- Net weight (pole + power stand, excluding subwoofer): 13.0 kg
- Compatibility: Bose Sub1, Bose Sub2 (SubMatch connection)
- Control: Bose Music app (formerly L1 Mix)
