AsciLab C8C Pair is a pair of active, three-way cardioid monitors with DSP. Besides the drivers on the front, each speaker carries two long-excursion 8-inch aluminium woofers on its sides, which invert the rear wave and cancel bass energy thrown at the back of the room. A Hypex Fusion amplifier powers each speaker, three channels per cabinet.
Bass that does not come back off the wall
In a small room the biggest problem is the low end: the wave reflected from the rear wall sums with the direct one and creates nulls and boosts at the listening position. Cardioid directivity in the bass range is meant to reduce this wall effect, so a mix translates better to other rooms. The system uses two 6-inch alumina ceramic midwoofers, a waveguide with the tweeter and two side-mounted 8-inch woofers.
You get a pair of speakers. At the back each has a panel with the connections and the amplifier module, and at the front a status LED that blinks while searching for a signal and stays green when the input is active. You choose operating modes with a button on the panel, and do full filter editing, including multiband EQ, over USB in the Hypex software. Magnetic grilles for the front midwoofers are included.
Full control through DSP
You set the crossover and EQ in the Hypex software over USB. The crossovers are 4th order at 1.2 kHz and 150 Hz, and each speaker has 100 W for the tweeter, 250 W for the midwoofers and 250 W for the woofers. Analogue and digital inputs auto-switch. For deeper bass AsciLab offers the BX8C module.
KEY FEATURES
- Active three-way cardioid monitor, Hypex Fusion DSP
- Two side-mounted 8-inch woofers form the bass cardioid
- Two 6-inch alumina ceramic midwoofers, waveguide with the tweeter
- Three amplifier channels per speaker: 100 W, 250 W and 250 W
- Filter and EQ editing in Hypex software over USB
- Analogue and digital inputs with auto-switching
- Expandable with the BX8C bass module
TECHNICAL SPECIFICATIONS
- Type: active, three-way, cardioid
- Drivers: 2 x 6 in midwoofer, 2 x 8 in woofer, tweeter on waveguide
- Crossovers: 1.2 kHz and 150 Hz, 4th order
- Amplification: 100 W / 250 W / 250 W per speaker
- Dimensions: 560 x 254 x 350 mm
- Weight: approx. 27.5 kg each
- Supplied as: pair






