SSQ JSXM3 Event – Jack stereo 6.3 mm / Male XLR 3 m is a balanced signal cable from the Polish brand SSQ's Event series, made from 6N copper sourced from KGHM Polska Miedź S.A. It connects a TRS Jack 6.3 mm plug on one end to a 3-pin male XLR on the other, at a length of 3 metres, with colour-coded length marking for fast identification on patch bays or in multi-cable event installations.
Balanced Transmission Without Compromise
The balanced TRS–XLR configuration carries the signal over two phase-inverted conductors, rejecting noise and electromagnetic interference before it reaches a mixer or audio interface – particularly relevant on longer cable runs across a stage or in FOH installations. A cross-wound copper braid shield with minimum 90% coverage provides effective EMI suppression, while the 85 Ω ±5 Ω impedance ensures proper matching with standard balanced inputs on pro audio equipment. Silver-bearing lead-free solder on the connectors and strain relief at both ends extend the service life under repeated connect/disconnect cycles.
Event Series – Order in Multi-Cable Setups
Colour-coded length markings on the plugs of the Event series allow instant identification of 1 m, 2 m, 3 m, and longer cables without uncoiling the whole run – a practical time-saver during fast stage changes. Included velcro ties simplify transport and storage. The outer jacket uses a self-extinguishing PVC compound compliant with EN 60332-1, meeting fire safety requirements for both fixed and flexible installations. SSQ backs the cable with a lifetime warranty.
KEY FEATURES
- Balanced TRS Jack 6.3 mm – 3-pin male XLR cable, 3 m length
- 6N copper (99.9999% purity) sourced from KGHM Polska Miedź S.A.
- Cross-wound copper braid shield, min. 90% coverage – effective EMI rejection
- Colour-coded length markings on plugs – fast identification in cable batches
- Silver-bearing lead-free solder on connectors
- Strain relief at both connector ends
- Velcro ties included for transport and storage
- Lifetime manufacturer warranty
- Made in Poland
TECHNICAL SPECIFICATIONS
- Connectors: TRS Jack 6.3 mm stereo – 3-pin male XLR
- Length: 3 m
- Conductors: 2 x 0.23 mm², stranded copper
- Conductor insulation: polyethylene PE (red, natural)
- Shield: copper braid, min. 90% coverage
- Outer diameter: 6 mm
- Jacket: self-extinguishing PVC, EN 60332-1 compliant
- Impedance: 85 Ω ±5 Ω
- Capacitance (1 kHz): conductor/conductor ≤ 65 nF/km, conductor/shield ≤ 130 nF/km
- Min. insulation resistance: 1.0 GΩxkm
- Min. bending radius: 5x cable diameter
- Operating temperature: fixed installations -30°C to +70°C, flexible -5°C to +70°C
