SSQ
SSQ RCARCA1
SSQ RCARCA1
Warsaw Showroom
Nowogrodzka 6
102
00-513 Warszawa
Pologne
Configurer
SSQ RCARCA1 — a one-metre 2xRCA to 2xRCA audio cable from the Polish brand SSQ (Sound Station Quality), built for line-level connections in studio and stage setups. The conductor is made from oxygen-free Polish copper, and the plugs are hand-soldered with lead-free tin and silver, then finished with 24-karat gold plating. A copper braid shield covers at least 90% of the cable, cutting down on susceptibility to electromagnetic interference over longer cable runs in a rack or on stage. The connectors carry strain relief against the cable being pulled out, and the manufacturer backs the cable with a lifetime warranty.
Shielding above the market norm
Cheaper RCA cables often shield only around 30% of the signal conductor's surface, which over longer runs near power supplies, transformers, or stage lighting easily introduces hum and noise. RCARCA1 shields at a minimum 90% coverage, so a line signal - a mixer's monitor output feeding an outboard processor, say - arrives with a lower noise floor even in a rack packed with electronic gear.
Built to survive daily plugging and unplugging
RCA connectors on cheap cables tend to crack or lose contact at the solder joint after a few months of frequent connecting and disconnecting - a routine situation in a studio or when setting up and breaking down gear on tour. RCARCA1's plugs carry strain relief protecting the conductor from being pulled out of the connector housing, and the hand-soldered tin-silver joint reduces the risk of a cracked connection when the cable flexes. A heat-shrink band at the ends and an included velcro tie keep the cable run organized and reduce mechanical stress at the most failure-prone point.
KEY FEATURES
- 2 x RCA to 2 x RCA cable, 1 metre length
- 24-karat gold-plated connectors
- Oxygen-free Polish copper conductor
- Hand-soldered tin-silver joints
- Shielding braid coverage of at least 90%
- Strain relief on connectors against cable pull-out
- Heat-shrink bands at the cable ends
- Included velcro cable tie
- Made in Poland, lifetime warranty
TECHNICAL SPECIFICATIONS
- Length: 1 m
- Connectors: 2 x RCA to 2 x RCA
- Conductor cross-section: 2 x 0.23 mm²
- Outer cable diameter: 5 mm
- Connector plating: 24-karat gold
- Shielding braid density: min. 90%
- Conductor material: oxygen-free copper (KGHM)
- Solder: lead-free tin-silver
