
Solton
Solton ST K4A
Quantité:
This item is available on a custom order basis only. Please contact us for more details. Contact us
Configurer
Quantité:
This item is available on a custom order basis only. Please contact us for more details. Contact us
Quantité:
This item is available on a custom order basis only. Please contact us for more details. Contact us
Solton ST K4A — a mounting stand/base for the Karat K4A loudspeaker, enabling the system to run ground-stacked or pole-mounted without flying.
Not every show calls for a full rigging setup. A club, a smaller venue, or an outdoor event often runs the same line array speaker as a bigger tour, just without the time or crew needed to fly it. ST K4A addresses that scenario mechanically: the Karat K4A enclosure mounts onto a stable base or pole socket, getting the system show-ready in minutes, with no chain motors or hanging points involved.
The Same Speaker, No Rigging Required
A crew working with a short setup window doesn't always have access to the anchor points or chain hoists a flown rig needs. ST K4A lets the Karat K4A be set up on the ground or on a heavy-duty mic stand pole, keeping the line array's full acoustic character while cutting stage setup time significantly.A Stable Position Under Full-Power Operation
A line array running at high SPL generates forces that, on an unstable base, end in cabinet vibration and the system creeping out of position. The ST K4A's construction spreads the load across a wide base, keeping the speaker's position stable through the whole set, whether it's sitting on a hard stage floor or soft outdoor ground.KEY FEATURES
- Mounting stand/base built specifically for the Karat K4A
- Enables ground-stacked or pole-mounted operation without flying
- Significantly faster setup compared to a full rigging configuration
- Wide base distributing load and limiting vibration at full power
- Compatible with the Karat K4A's mounting insert
- Useful in both club settings and short-turnaround outdoor events
TECHNICAL SPECIFICATIONS
- Type: mounting stand/base for a line array loudspeaker
- Compatibility: built for the Karat K4A model
- Material: steel, rated for dynamic operating loads
- Installation: pole socket or stable ground base
- Application: non-flown operation - ground-stacked or pole-mounted configuration
- Intended use: clubs, smaller venues, outdoor events with short setup windows

