RODE
RODE Stéréo VideoMic Pro Rycote
Configurer
RØDE Stereo VideoMic Pro Rycote – a professional stereo on-camera microphone featuring a matched pair of high-sensitivity 1/2" cardioid condenser capsules in a coincident XY configuration for capturing wide, natural-sounding stereo audio. Designed for filmmakers and videographers, it combines broadcast-quality sound with an integrated Rycote Lyre shock mounting system for superior isolation from handling noise and vibrations.
Stereo VideoMic Pro Rycote is built to capture realistic ambient audio from diverse sound sources, making it ideal for recording music, atmospheric ambience, interviews, and documentary work. The XY capsule arrangement delivers a wide stereo image with natural depth, perfect for creating immersive soundscapes. The revolutionary Rycote Lyre shock mount is constructed from a single piece of hard-wearing thermoplastic, providing superior acoustic suspension compared to traditional elastic solutions – it will never wear out, sag, or snap.
This upgraded version features higher-sensitivity XY capsules, denser foam windscreen, better RF shielding, and a thicker Kevlar-reinforced braided cable for exceptional durability and lower noise transference. The microphone offers versatile audio control with a three-stage gain control (-10dB / 0 / +20dB), where the +20dB boost is specifically designed to work with DSLR cameras by reducing camera preamp noise for clearer recordings. A selectable high-pass filter at 75Hz eliminates low-frequency rumble from air conditioners, traffic, and environmental noise. Powered by a single 9V battery with extended operation time, the Stereo VideoMic Pro Rycote includes a high-density foam windshield for outdoor recording and connects via a 3.5mm stereo mini-jack output. The standard shoe mount features a 3/8" thread for boom pole or stand mounting. Designed and manufactured in Australia, it's covered by RØDE's industry-leading 10-year warranty.
KEY FEATURES
- Matched pair of high-sensitivity 1/2" cardioid condenser capsules
- Coincident XY stereo configuration for wide, natural stereo image
- Integrated Rycote Lyre shock mounting system – never wears out
- Three-stage gain control: -10dB / 0 / +20dB
- +20dB boost specifically designed for DSLR cameras
- High-pass filter at 75Hz for eliminating low-frequency noise
- Higher-sensitivity capsules for improved audio capture
- Kevlar-reinforced braided cable for superior durability
- Denser foam windscreen for better wind protection
- Improved RF shielding for cleaner recordings
- Lightweight design at only 116g (4.1 oz)
- Battery-powered: 9V alkaline with extended operation
- Standard shoe mount with 3/8" thread for boom pole mounting
- 3.5mm stereo mini-jack output
- Designed and made in Australia
- 10-year warranty with free registration
TECHNICAL SPECIFICATIONS
- Acoustic Principle: Pressure Gradient
- Active Electronics: JFET impedance converter
- Capsule: Matched pair 0.50" (1/2 inch) cardioid condenser
- Polar Pattern: Cardioid (XY stereo configuration)
- Address Type: End address
- Frequency Range: 40Hz – 20kHz (selectable HPF at 75Hz)
- Output Impedance: 200Ω
- Maximum SPL: 134 dB SPL @ 1kHz (1% THD into 1kΩ load)
- Sensitivity: -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) ±2 dB @ 1kHz
- Equivalent Noise Level: 18 dBA (A-weighted, as per IEC651)
- Maximum Output: +4.2 dBu @ 1% THD into 1kΩ
- Dynamic Range: 102 dB SPL
- Signal-to-Noise Ratio: 76 dBA SPL (A-weighted)
- High-Pass Filter: Selectable 75Hz
- Gain Control: Three-stage (-10dB / 0 / +20dB)
- Power: 9V alkaline battery (extended operation time)
- Output Connector: 3.5mm stereo mini-jack (TRS)
- Cable Length: 25cm (9.84")
- Weight: 116g (4.1 oz) without battery
- Dimensions: 115mm (W) × 134mm (H) × 80mm (D)
- Mounting: Standard camera shoe mount with 3/8" thread
- Warranty: 10 years (with free registration)
- Included: High-density foam windshield, storage pouch
