The Violectric HPA V222 is a fully balanced headphone amplifier engineered to deliver massive output power and uncompromised signal clarity within a compact, desktop-friendly footprint. Designed for professional mixing engineers and analytical audiophiles, it utilizes a proprietary true-balanced topology driven by four discrete amplifier stages. This architecture provides an absolutely transparent, distortion-free audio path, ensuring a clinical representation of the source material that is vital for rigorous mix evaluation and precise mastering adjustments.
Maximum Headroom via 50V Architecture
Driving power-hungry planar magnetic transducers or high-impedance dynamic studio headphones can often push smaller tracking amplifiers into early compression and artifacting. The V222 circumvents this dynamic bottleneck entirely by utilizing a 50 V internal operating voltage rail. This high-voltage architecture yields an immense headroom margin, capable of generating 23 V RMS into 600 Ohms and pushing up to 3500 mW into a 50-Ohm load. Consequently, rapid transients and dynamic peaks remain uncompressed, while the high damping factor exercises strict mechanical control over the drivers, resulting in a surgically tight and fast low-end response.
Pre-Gain Matching and ALPS Accuracy
Alternating between inefficient open-back mastering headphones and hyper-sensitive in-ear monitors (IEMs) usually exposes a noticeable, compromising noise floor. The V222 mitigates this through a rear-mounted hardware Pre-Gain system, allowing engineers to physically adjust the internal sensitivity of the circuit across 7 precise stages (ranging from -18 dB to +18 dB). This completely eradicates background hiss. Output attenuation is seamlessly managed by a premium ALPS RK27 potentiometer, providing a tactile, linear feel and flawless left/right channel tracking—an essential trait for accurately assessing panning and stereo width during a session.
KEY FEATURES
- Four discrete amplifier stages executing a true balanced, uncolored signal path for analytical listening environments.
- Exceptionally high 50 V internal operating voltage delivering 3500 mW of power and limitless transient dynamics.
- Rear-mounted hardware Pre-Gain adjustment system (-18 to +18 dB) to optimize the noise floor for highly sensitive IEMs.
- Premium ALPS RK27 volume potentiometer providing smooth, reliable attenuation and exact stereo channel tracking.
- Robust, space-saving aluminum chassis offering substantial structural shielding against electromagnetic interference (EMI).
TECHNICAL SPECIFICATIONS
- Device Type: Solid-state headphone amplifier (Balanced)
- Analog Inputs: 1x Balanced XLR, 1x Unbalanced RCA
- Headphone Outputs: 1x 4-pin XLR (Balanced), 1x 4.4 mm Pentaconn (Balanced), 1x 6.3 mm / 1/4" Jack (Unbalanced)
- Maximum Output Power: 3500 mW (at 50 Ohms)
- Maximum Output Voltage: 23 V RMS (at 600 Ohms)
- Volume Control: ALPS RK27 potentiometer
- Pre-Gain Adjustments: -18, -12, -6, 0, +6, +12, +18 dBr
- Power Supply: Internal toroidal transformer featuring > 22,000 μF filter capacitance
- Dimensions: 170 x 54 x 228 mm (6.7" x 2.1" x 9.0")
