Kemper Profiler Set: Rack and Remote – a bundle comprising the non-powered PROFILER Rack in a 3U 19" chassis and the PROFILER Remote foot controller.
The PROFILER Rack runs the same profiling and effects engine as the rest of the line - in the MK2 version, a section with six fixed effects and four flexible modules ahead of the AMP/CABINET, plus two fixed and four flexible stereo effects after it, for 20 audio blocks in total. The output signal stays at line level, with no built-in power amp, making the Rack a natural fit where an external power amp or an active cabinet like the KEMPER Power Kabinet handles driving the guitar cab. The PROFILER Remote connects to the rack via a Neutrik etherCON connector, with a range beyond 100 m using a powered Ethernet hub.
Universal voltage for international touring
The PROFILER Rack's power supply accepts a wide voltage range of 90-275V AC, letting the unit run in different countries without a voltage switch or an extra transformer. That solves the problem of overseas tours, where a band plays venues fed by different mains standards, and every added voltage adapter is one more thing that could fail right before a show.A lighter chassis with no power amp onboard
Dropping the built-in power amp brings the unit's weight down to around 5 kg, less than the PowerRack version, making it easier to transport when building a rack setup that combines several devices in one case. When a guitar cabinet needs driving, the Rack can pair with an external solid-state or tube power amp, or with an active KEMPER Power Kabinet, letting you choose the character of the final power stage independently of the profiling engine itself.KEY FEATURES
- PROFILER Rack: line-level output, no built-in power amp
- 20 audio blocks: 6 fixed effects + 4 flexible (pre AMP/CAB), 2 fixed + 4 flexible stereo (post)
- Wide power input range: 90-275V AC
- Unit weight: approx. 5 kg
- PROFILER Remote: 5 rig switches, tuner, looper, tap-tempo
- Remote-to-Rack connection: Neutrik etherCON, up to 100 m range with a hub
TECHNICAL SPECIFICATIONS
- Set type: rackmount profiling amplifier (no power amp) + foot controller
- Rack dimensions: 3U, 48.3 x 13.9 x 22 cm
- Rack weight: approx. 5 kg
- Line voltage: 90-275V AC
- I/O: 2 x guitar input, stereo Main Out, Monitor Out, Send/Return, MIDI, S/PDIF, USB
- PROFILER Remote: 5 rig switches, 4 pedal inputs, etherCON connector
- Remote connection range: up to 100 m with a powered Ethernet hub
