Audient ASP8024 Heritage Edition 36 Ch Console/DLC Module

AUDIENT

Audient ASP8024 Heritage Edition 36 Ch Console/DLC Module

Sale price€0,00
Sold out

Tax included. Shipping calculated at checkout

No reviews
No reviews
SKU: 27740

Contact

Audient ASP8024 Heritage Edition 36 Ch Console/DLC Module is a 36-channel fully analog in-line recording console with 24-bus routing, equipped with the Dual Layer Control (DLC) module — a four-bay configuration (three 12-channel bays, master section, and DLC bay) measuring approximately 239 cm wide and weighing around 166 kg. The DLC integrates DAW control and VCA automation directly into the console structure without a separate controller, making the 36-channel DLC configuration a complete hybrid studio hub within a single physical frame. All signal path specifications, EQ topology, and Retro Iron circuit are identical to the standard 36-channel configuration.

DLC — Analog VCA Automation and Full DAW Control in One Bay

The Dual Layer Control module provides 8 motorised faders bankable across the entire session, 8 additional line inputs routable to the mix bus or subgroups, a high-resolution OLED display, a jog/shuttle wheel for project navigation, and a full set of transport and session controls. Eight channels of VCA automation allow console fader moves to be recorded and played back in the analog domain — combined with direct DAW fader control via those same eight physical faders, DLC creates a dual-layer control environment: an analog layer (VCA on console channels) and a DAW layer (HUI/Mackie Control protocol via Ethernet). Functions include DAW record arming, plug-in selection and parameter editing, auxiliary automation, and project navigation — all without reaching for a keyboard during a session. Supported DAWs are Pro Tools, Logic, Cubase, and Nuendo.

In-Line at 36 Channels and Retro Iron Mix Bus

The in-line architecture delivers 80 inputs from the 36 channel strips plus 8 additional line inputs from the DLC module — up to 88 signal sources managed from a single operating position. The four-band Dearden EQ with two fully parametric mid bands (40 Hz–20 kHz, ±15 dB, variable Q) and two shelving bands is splittable per channel independently. Retro Iron on the stereo bus output — Carnhill transformer and John Hardy 990C — delivers +28 dBu into 600 Ω at the mix insert send with Low Bump and High Lift EQ before the output faders. The VCA stereo bus compressor with adjustable threshold, ratio, auto-release, and GR metering operates post-insert, pre-fader. Fourteen aux sends (12 mono plus 2 cue), 8 subgroups, 36 record buses, and Penny & Giles 8000 series faders on all input channels. Supplied with a single ASP8120 Ultra power supply.

KEY FEATURES

  • 36-channel in-line, 24-bus routing, 80 in-line inputs + 8 DLC line inputs = 88 total inputs
  • DLC module: 8 motorised faders with session-wide banking, 8 channels of VCA automation, DAW control (Pro Tools, Logic, Cubase, Nuendo)
  • DLC: OLED display, jog/shuttle wheel, transport, record arm, plug-in control, aux automation, Ethernet connection
  • DLC: 8 additional line inputs routable to mix bus or subgroups
  • 36 discrete Class A mic preamps (Dearden design)
  • 4-band splittable EQ per channel: 2 parametric bands (40 Hz–20 kHz, ±15 dB, variable Q) + 2 shelving
  • Retro Iron: Carnhill transformer + John Hardy 990C output amplifier, Low Bump / High Lift EQ on mix bus, +28 dBu into 600 Ω at mix insert send
  • VCA stereo bus compressor — adjustable threshold, ratio, auto-release, GR meter
  • 14 aux sends (12 mono + 2 cue), 8 subgroups, 4 stereo FX returns, 36 record buses
  • 5 pairs of monitor outputs (Main + 3 Alt + Studio LS)
  • Penny & Giles 8000 series faders on all input channels
  • Semi-modular layout — three 12-channel bays + master + DLC, each independently serviceable
  • Single ASP8120 Ultra power supply (included)

TECHNICAL SPECIFICATIONS

  • Channels: 36 (80 in-line inputs + 8 DLC line inputs)
  • Buses: 24-bus, 8 subgroups, 14 aux (12 mono + 2 cue), 36 record buses
  • DLC: 8 motorised faders, 8-channel VCA automation, Ethernet; supported DAWs: Pro Tools, Logic, Cubase, Nuendo
  • Frequency response, mic in to mix out: +0 / -0.3 dB, 20 Hz–20 kHz (at 6–40 dB gain)
  • Frequency response, line in to mix out: +0 / -0.3 dB, 20 Hz–20 kHz (at 0 dB gain)
  • THD+noise at +20 dBu output (mic in): below 0.005% at 1 kHz
  • THD+noise at +20 dBu output (line in): below 0.005% at 1 kHz
  • THD+noise at +20 dBu output (tape in): below 0.003% at 1 kHz
  • Mic EIN (20–20 kHz, 150 Ω source): below -127.5 dBu
  • Bus noise (no inputs routed): below -93 dBu
  • Bus noise (36 inputs routed): below -78 dBu
  • Mic CMRR: 70 dB (min gain) / 75 dB (max gain)
  • Crosstalk / mute attenuation (short fader, long fader, mix assign, bus assign): above 90 dB at 1 kHz
  • Maximum output into 2 kΩ (mix, bus, aux): above +26 dBu
  • Mix insert send headroom: +28 dBu into 600 Ω
  • Dimensions: approx. 239.0 x 106.5 x 99.9 cm (36 Ch + DLC configuration)
  • Weight: approx. 166 kg (365 lbs)
  • Power: 1x ASP8120 Ultra (included)

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Returns

We want you to be sure of your choice and that the goods fit 100%.

For this reason, you have 30 days to test the product, during which you can return it without giving a reason.

It is important to keep the factory appearance of the goods, consumer properties and full equipment (original packaging, labels, manuals, software CDs, all inserts, everything that was included in the delivery).

If you have decided to return the goods, please write to us at return@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

Please note that refunds are not available for:

  • Cables and connectors
  • Software
  • Devices with a used voucher and serial numbers for which they were registered
  • Custom accessories (earbuds, earbuds)
  • Needles and cartridges
  • Care and hygiene products

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Warranty

We care about our customers and carefully select the producers and products that we present in Wired Tunes, which is why we are sure of their quality. If the product does not meet our standards, you will not find our catalog on the list.

Our warranty is 36 months for all products and 60 months for ADAM Audio products.

Except for consumables, strings, tubes and crossfaders, and products showing signs of misuse.

In the event of damage, please contact us via support@wiredtunes.pl, after which we will contact you and inform you about the next steps of the procedure.

If the product cannot be repaired, it will be replaced with a new one, or in the absence of an available model, we will replace it with an analogous one in the same price range or refund the entire amount that has been paid. The most important thing is that the product is used properly.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.

Fast Delivery

All orders placed on our online store are delivered using the following delivery methods:

  • DPD Courier
  • UPS Courier
  • GLS Courier
  • DB Schenker

For orders valued up to 250 EUR, the delivery cost:

  • 15 euros: Germany, Belgium, Czechia, Hungary, Latvia, Luxembourg, Austria
  • 20 euros: Italy, Denmark, Estonia, France, Lithuania, Netherlands, Romania, Slovakia
  • 30 euros: Bulgaria, Croatia, Cyprus, Finland, Greece, Ireland, Malta, Portugal, Slovenia, Spain

For orders above 250 EUR, delivery is free.

The delivery time is typically 7 days.

For oversized orders, we use carriers such as DPD, GLS, and DB Schenker. The store manager will provide information on the cost and delivery time when your order is accepted.