AKG
AKG C414 XLII
AKG C414 XLII
Warsaw Showroom
Nowogrodzka 6
102
00-513 Warszawa
Poland
AKG C414 XLII is a versatile condenser microphone with a dual 1-inch diaphragm, with a variable polar pattern (cardioid, hypercardioid, omnidirectional, figure-8, wide cardioid) and an impressive dynamic range of 134 dB. The microphone's self-noise does not exceed 6 dB-A, which is comparable to the level of top professional studio microphones.
The microphone's diaphragm is made of a flexible, high-quality gold-plated foil, which prevents the capsule from sticking even at high sound pressure levels. The capsule is fixed to an anti-vibration mount and protected by a 3 mm metal mesh, which further protects the diaphragm from air currents and harsh sounds like "b" and "p". The C414 XLII model has the ability to switch between several level modes via buttons: -6 dB/-12 dB/-18 dB for very loud sound sources, as well as a built-in high-pass filter with two modes: a 12 dB/octave roll-off at 40 or 80 Hz and a 6 dB/octave roll-off at 160 Hz. The selected mode is illuminated by a green LED.
The microphone is very useful in film production (voice-over, dubbing), as well as in professional recording studios for recording live musical instruments (suitable for strings - violin and cello, acoustic and electric guitar, piano, grand piano in rock and jazz styles, organ, brass and woodwind groups) and vocals (solo vocal parts, speech).
AKG C414 XLII Features
- Versatile studio microphone
- Acoustic characteristics of the famous AKG C12
- 9 selectable polar patterns
- 3 levels of signal attenuation (-6/-12/-18 dB)
- 3 switchable low-cut filters
- Overload indication via LED with peak hold
- High SPL level up to 158 dB
AKG C414 XLII Specs
- Type: Condenser
- Diaphragm: Dual, 1 inch diameter
- Polar pattern: Cardioid/Hypercardioid/Omnidirectional/Figure-8/Wide Cardioid
- Sensitivity (1 kHz, 1 kOhm): 23 mV/Pa; -33 dBV
- Frequency response: 20 Hz - 20 kHz
- Nominal impedance: Less than 200 Ohms
- Nominal load impedance: 2 kOhms and above
- Equivalent noise level: 20 dB-A (IEC 60268-4) (at 0 dB level)
- Equivalent noise level (A-weighted): 6 dB(A) (at 0 dB level)
- Maximum sound pressure level (THD 0.5%): 140/146/152/158 dB for levels 0/-6/-12/-18 dB
- Dynamic range: 134 dB
- Signal-to-noise ratio (A-weighted): 88 dB
- Maximum output level: 5 V RMS (+14 dBV)
- Operating temperature: -10° to +60°
- Humidity: 90% (-20° C), 85% (+60° C)
- Level switch: -6 dB/-12 dB/-18 dB
- High-pass filter: 12 dB/octave below 40/80 Hz; 6 dB/octave below 160 Hz
- Phantom power: 48 V
- Current consumption: 4.5 mA
- Connector: XLR3F
- Dimensions: 50x38x160 mm
- Weight: 300 grams