{"product_id":"rode-wireless-go-3-cobalt","title":"Rode Wireless Go 3 Cobalt","description":"\u003cdiv lang=\"en\"\u003e   \u003cp\u003e\u003cstrong\u003eRode Wireless Go 3 Cobalt\u003c\/strong\u003e is a third-generation dual-channel compact wireless microphone system — a \u003ca href=\"https:\/\/wrdtunes.com\/collections\/microphones\"\u003emicrophone\u003c\/a\u003e built for filmmakers, vloggers, and content creators who need professional-grade recording in any situation without sacrificing ease of use. Cobalt is a limited-edition colour variant of the GO Gen 3, which over its predecessor brings 32-bit float on-board recording, upgraded capsules and preamps shared with the flagship Wireless PRO, extended range up to 260m, and locking lavalier connectors — all in the same compact square form factor.\u003c\/p\u003e   \u003ch3\u003e32-Bit Float and GainAssist — No More Ruined Takes\u003c\/h3\u003e   \u003cp\u003eEach of the two TX transmitters features a built-in 32-bit float recorder with 32GB of storage — over 40 hours of backup recording running in parallel with the signal sent to the camera. The 32-bit float format means both clipped and too-quiet recordings can be rescued in post-production without quality loss. Intelligent GainAssist operates in two modes (Auto and Dynamic) or can be switched off for manual gain control across a 30dB range. The Safety Channel records a second track at -10dB as an additional insurance layer for unexpected volume spikes.\u003c\/p\u003e   \u003cp\u003eThe built-in omnidirectional capsules and preamps are the same units found in the Wireless PRO — 50Hz–20kHz frequency response, 72dB SNR, 123.5dB max SPL. Locking 3.5mm TRS connectors on both transmitters prevent accidental disconnection of a plugged-in lavalier during recording.\u003c\/p\u003e   \u003ch3\u003eUniversal Compatibility and Direct Connect for iOS\u003c\/h3\u003e   \u003cp\u003eThe RX receiver outputs both digitally via USB-C and analogue via 3.5mm TRRS, making the Wireless GO 3 compatible with DSLR and mirrorless cameras, Android and iOS smartphones, and computers as a USB audio interface. The 3.5mm headphone output on the receiver enables on-location audio monitoring. Direct Connect (iOS only) lets transmitters pair directly to a smartphone via Bluetooth through the RØDE Capture app — no receiver required. The system is fully compatible with all RØDE Series IV devices: RØDECaster Pro II, Duo, Video, Wireless PRO, and Interview PRO.\u003c\/p\u003e   \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e   \u003cul\u003e     \u003cli\u003eDual-channel system: 2× TX + 1× RX — simultaneous recording of two sources\u003c\/li\u003e     \u003cli\u003eSeries IV 2.4GHz transmission with 128-bit encryption and near-zero latency codec\u003c\/li\u003e     \u003cli\u003eOperating range: up to 260m line-of-sight\u003c\/li\u003e     \u003cli\u003e32-bit float on-board recording: 32GB per transmitter, 40+ hours of backup audio\u003c\/li\u003e     \u003cli\u003eIntelligent GainAssist (Auto \/ Dynamic \/ Off) + Safety Channel at -10dB\u003c\/li\u003e     \u003cli\u003eBuilt-in omnidirectional capsules — same as Wireless PRO (50Hz–20kHz)\u003c\/li\u003e     \u003cli\u003eLocking 3.5mm TRS connectors on transmitters for external lavalier microphones\u003c\/li\u003e     \u003cli\u003eDigital USB-C and analogue 3.5mm TRRS outputs on receiver\u003c\/li\u003e     \u003cli\u003e3.5mm headphone output on receiver for in-field audio monitoring\u003c\/li\u003e     \u003cli\u003eDirect Connect (iOS): Bluetooth pairing via RØDE Capture without receiver\u003c\/li\u003e     \u003cli\u003ePlug-in Power Detect — auto power on\/off triggered by camera\u003c\/li\u003e     \u003cli\u003eBattery life: up to 7 hours; compatible with optional Charge Case+ (up to 21h total)\u003c\/li\u003e     \u003cli\u003eCompatibility: iOS 14+, Android 9+, macOS 11+, Windows 10+\u003c\/li\u003e     \u003cli\u003eCompatible with all RØDE Series IV devices\u003c\/li\u003e     \u003cli\u003eColour: Cobalt (limited edition); also available in Black, White, and other colours\u003c\/li\u003e     \u003cli\u003eDesigned and manufactured in Sydney, Australia\u003c\/li\u003e   \u003c\/ul\u003e   \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e   \u003cul\u003e     \u003cli\u003eTransmission: RØDE Series IV 2.4GHz digital, 128-bit encryption\u003c\/li\u003e     \u003cli\u003eOperating range: up to 260m line-of-sight\u003c\/li\u003e     \u003cli\u003eFrequency response (built-in mic): 50Hz – 20kHz\u003c\/li\u003e     \u003cli\u003eFrequency response (receiver): 20Hz – 20kHz\u003c\/li\u003e     \u003cli\u003ePolar pattern: Omnidirectional\u003c\/li\u003e     \u003cli\u003eMaximum SPL: 123.5 dB\u003c\/li\u003e     \u003cli\u003eSignal-to-noise ratio: 72 dB\u003c\/li\u003e     \u003cli\u003eOn-board recording: 32-bit float \/ 48kHz, 32GB (40+ hours) per transmitter\u003c\/li\u003e     \u003cli\u003eTX input: locking 3.5mm TRS (external lavalier)\u003c\/li\u003e     \u003cli\u003eRX outputs: 3.5mm TRRS (camera\/smartphone), USB-C, 3.5mm TRS (headphones)\u003c\/li\u003e     \u003cli\u003eBattery life: up to 7 hours per charge\u003c\/li\u003e     \u003cli\u003eDimensions (TX and RX): 46.5 × 44 × 20 mm\u003c\/li\u003e     \u003cli\u003eWeight: TX 35g, RX 36g\u003c\/li\u003e     \u003cli\u003eIn the box: 2× TX transmitter, 1× RX receiver, USB-C charging hub (3× output), SC2 cable (3.5mm TRS), SC21 cable (USB-C to Lightning), SC22 cable (USB-C to USB-C), 3× furry windshield, carry pouch\u003c\/li\u003e   \u003c\/ul\u003e \u003c\/div\u003e","brand":"RODE","offers":[{"title":"Default Title","offer_id":53395181535569,"sku":"59207","price":189.63,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/RodeWirelessGo3Cobalt1.jpg?v=1774968056","url":"https:\/\/wrdtunes.com\/products\/rode-wireless-go-3-cobalt","provider":"Wired Tunes","version":"1.0","type":"link"}