{"product_id":"aea-n22","title":"AEA N22","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eAEA N22\u003c\/strong\u003e is an active ribbon microphone from the NUVO series, designed for near-field recording applications. A 41 mm cylindrical body in satin nickel finish houses a 1.8-micron Big Ribbon at 59.7 mm × 4.7 mm, active JFET electronics with a German-made Lehle transformer (identical to the one in the A440 and R84A), and a multi-layer screen of fabric and metal mesh that suppresses proximity effect and protects the ribbon acoustically — not electronically. The N22 was the first microphone in the NUVO series and the first to make Big Ribbon technology practical for direct close-miking without a separate pop filter.\u003c\/p\u003e\n\n  \u003ch3\u003eNear-Field Design and Upper-Mid Presence\u003c\/h3\u003e\n  \u003cp\u003eThe N22's motor is voiced for 1–18 inches of working distance. Within this range the microphone holds tonal balance without the low-frequency buildup that makes most ribbon mics unwieldy at close range. A sensitivity lift around 3 kHz gives vocals, electric guitars, drums, and bass cabs a degree of mix presence without EQ — a distinction from classic ribbon designs with their characteristically recessed midrange. The multi-layer screen is effective enough for vocal use without an additional pop filter, according to AEA's own guidance. The top end rolls off gently above 5 kHz — no condenser harshness, the smoothness typical of ribbon transducers, with enough extension to capture definition and detail in the upper midrange.\u003c\/p\u003e\n\n  \u003ch3\u003eActive Electronics — Full Resolution with Any Preamp\u003c\/h3\u003e\n  \u003cp\u003eThe Lehle step-up transformer delivers +12 dB of output over a passive ribbon — sensitivity of 6.2 mV\/Pa (–44.1 dBV) produces a usable level from a USB audio interface without any inline booster or dedicated high-gain ribbon preamp. Output impedance of 92 Ω broadband is load-independent, meaning the tonal character remains consistent regardless of which preamp the mic connects to. Active JFET circuitry powered by 48 V phantom suppresses electromagnetic interference on long cable runs and in environments with large lighting rigs. Maximum SPL of 141 dB handles guitar amplifier speakers and drums without risk to the ribbon element.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eActive NUVO series ribbon microphone — near-field, side-address\u003c\/li\u003e\n    \u003cli\u003eBig Ribbon — 1.8-micron aluminum, 59.7 mm × 4.7 mm\u003c\/li\u003e\n    \u003cli\u003eActive JFET electronics + Lehle transformer (Germany) — +12 dB output vs. passive ribbon\u003c\/li\u003e\n    \u003cli\u003eOutput impedance: 92 Ω broadband\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 6.2 mV\/Pa (–44.1 dBV) at 1 kHz, no load\u003c\/li\u003e\n    \u003cli\u003eMax SPL: 141 dB (1% THD harmonic distortion \u0026gt;1 kHz)\u003c\/li\u003e\n    \u003cli\u003ePower: P48 phantom, 7 mA\u003c\/li\u003e\n    \u003cli\u003ePolar pattern: figure-8 (bidirectional)\u003c\/li\u003e\n    \u003cli\u003e~3 kHz presence lift — mix readability without EQ\u003c\/li\u003e\n    \u003cli\u003eMulti-layer acoustic screen — proximity reduction and wind blast protection\u003c\/li\u003e\n    \u003cli\u003eRecommended working distance: 1–18 inches (near-field)\u003c\/li\u003e\n    \u003cli\u003eOff-axis rejection: up to 90 dB at 90°\/270°\u003c\/li\u003e\n    \u003cli\u003eSatin nickel finish, 41 mm body diameter\u003c\/li\u003e\n    \u003cli\u003eAccessories: storage case, shockmount mic clip, protective sleeve\u003c\/li\u003e\n    \u003cli\u003eDimensions: 225 mm × 41 mm (diameter); weight approx. 335 g\u003c\/li\u003e\n    \u003cli\u003eHandmade in Pasadena, California, USA\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOperating principle: pressure gradient transducer\u003c\/li\u003e\n    \u003cli\u003ePolar pattern: figure-8 (bidirectional)\u003c\/li\u003e\n    \u003cli\u003eFrequency range: \u0026lt;20 Hz – \u0026gt;20 kHz\u003c\/li\u003e\n    \u003cli\u003eMax SPL: 141 dB (1% THD \u0026gt;1 kHz)\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 6.2 mV\/Pa (–44.1 dBV) at 1 kHz, no load\u003c\/li\u003e\n    \u003cli\u003eOutput impedance: 92 Ω broadband\u003c\/li\u003e\n    \u003cli\u003eRecommended load impedance: ≥1 kΩ\u003c\/li\u003e\n    \u003cli\u003ePower: P48 phantom, 7 mA\u003c\/li\u003e\n    \u003cli\u003eRibbon thickness: 1.8 µm; width: 4.7 mm; length: 59.7 mm\u003c\/li\u003e\n    \u003cli\u003eRibbon material: corrugated aluminum\u003c\/li\u003e\n    \u003cli\u003eOutput connector: XLR-3M\u003c\/li\u003e\n    \u003cli\u003eDimensions: 225 mm (H) × 41 mm (diameter)\u003c\/li\u003e\n    \u003cli\u003eWeight: approx. 335 g\u003c\/li\u003e\n    \u003cli\u003eMade in: USA (Pasadena, CA)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"AEA","offers":[{"title":"Default Title","offer_id":54014129439057,"sku":"25528","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/AEAN221.jpg?v=1781105272","url":"https:\/\/wrdtunes.com\/products\/aea-n22","provider":"Wired Tunes","version":"1.0","type":"link"}