{"product_id":"ssq-xlrjs3","title":"SSQ XLRJS3","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eSSQ XLRJS3\u003c\/strong\u003e is a three-metre balanced cable with a 3-pin female XLR socket on one end and a 6.3 mm stereo jack on the other. That pairing covers every point where the source hands over a signal on XLR while the destination only takes a TRS jack.\u003c\/p\u003e\n\u003ch3\u003eOne cable instead of a stack of adapters\u003c\/h3\u003e\n\u003cp\u003eThe scenario repeats in every studio and on every stage: a preamp, mixer or stagebox sends the signal out on XLR, while the input on the interface, processor or active monitor is a large jack. The usual fix is an adapter screwed onto a plain mic cable, which means one more contact point that starts crackling after a season and falls out the moment somebody brushes past it. XLRJS3 covers the run with a single lead, keeps the balanced pair intact end to end and seats the connector in the socket the way it was meant to sit.\u003c\/p\u003e\n\u003ch3\u003eA lead that survives the tour\u003c\/h3\u003e\n\u003cp\u003eThe conductors use 6N grade OFC copper in a 30 x 0.1 stranded build, so daily coiling and uncoiling does not fatigue them. A cross-braided copper shield with at least 90 percent coverage keeps power bricks, dimmers and everything else living under the stage out of the signal. Connectors are soldered with lead-free silver-bearing tin and protected against cable pull-out, and a hook-and-loop tie ships with every unit, so the cable goes back into the case coiled rather than knotted. The manufacturer covers it with a lifetime warranty.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConnectors: 3-pin female XLR and 6.3 mm stereo jack\u003c\/li\u003e\n\u003cli\u003eBalanced signal path maintained over the full length\u003c\/li\u003e\n\u003cli\u003e6N grade OFC copper, made in Poland\u003c\/li\u003e\n\u003cli\u003eCross-braided copper shield with at least 90 percent coverage\u003c\/li\u003e\n\u003cli\u003eConnectors soldered with lead-free silver-bearing tin\u003c\/li\u003e\n\u003cli\u003eStrain relief protecting the connectors against cable pull-out\u003c\/li\u003e\n\u003cli\u003eHook-and-loop cable tie included with every unit\u003c\/li\u003e\n\u003cli\u003eLifetime manufacturer warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 3 metres\u003c\/li\u003e\n\u003cli\u003eConductor: 2 x 0.23 mm², 30 x 0.1 stranded multi-wire copper\u003c\/li\u003e\n\u003cli\u003eOuter cable diameter: 6 mm\u003c\/li\u003e\n\u003cli\u003eImpedance: 85 Ω ±5\u003c\/li\u003e\n\u003cli\u003eCapacitance at 1 kHz: up to 65 nF\/km conductor to conductor, up to 130 nF\/km conductor to shield\u003c\/li\u003e\n\u003cli\u003eMinimum insulation resistance: 1.0 GΩ x km\u003c\/li\u003e\n\u003cli\u003eMinimum bend radius: 5 x cable diameter\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -30 to 70 °C fixed installation, -5 to 70 °C mobile use\u003c\/li\u003e\n\u003cli\u003eManufacturer code: SS-2061\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SSQ","offers":[{"title":"Default Title","offer_id":54639698608465,"sku":"543982","price":15.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/SSQXLRJS31.jpg?v=1787252729","url":"https:\/\/wrdtunes.com\/fr\/products\/ssq-xlrjs3","provider":"Wired Tunes","version":"1.0","type":"link"}