{"product_id":"royer-labs-r122-mkii","title":"Royer Labs R122 mkII","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eRoyer Labs R-122 MKII\u003c\/strong\u003e is a phantom-powered active ribbon microphone — the updated version of the original R-122 from 2002, the world's first phantom-powered active ribbon microphone. The MKII preserves the complete architecture of its predecessor and adds two switchable circuits: a -15 dB pad and a bass-cut filter. Both are fully removed from the signal path when disengaged, meaning that with both switches off, the microphone is functionally identical to the original R-122. Active electronics deliver -36 dB sensitivity, placing the R-122 MKII on par with studio condenser microphones, with self-noise below 18 dB. Hand-wired and assembled at Royer's facility in Burbank, California.\u003c\/p\u003e\n\n  \u003ch3\u003eActive electronics, pad, and filter — three levels of control\u003c\/h3\u003e\n  \u003cp\u003eA hand-wired discrete head amplifier using ultra-low-noise FETs and a custom-wound toroidal transformer maintains a constant, optimal impedance load on the ribbon element regardless of the downstream preamp's input characteristics. The higher sensitivity comes entirely from the transformer (free gain) — the active circuitry functions as an impedance converter and contributes no noise of its own. The -15 dB pad is positioned before the microphone's electronics: at high SPLs, the signal is attenuated before reaching any active component, eliminating the possibility of distortion in the microphone or at the preamp input. With the pad engaged, the R-122 MKII's output is 2 dB lower than the passive R-121. The switchable high-pass filter operates at 100 Hz with a 6 dB per octave slope, providing proximity effect control and rumble suppression. Both switches are recessed into the body to prevent accidental activation.\u003c\/p\u003e\n\n  \u003ch3\u003eFaster transient response and patented offset ribbon\u003c\/h3\u003e\n  \u003cp\u003eRoyer's purpose-designed toroidal transformer delivers faster transient response than conventional passive ribbon designs — producing tighter, more controlled low end and a sense of more open highs. Engineers frequently reach for the R-122 MKII over the R-121 for drum overheads, acoustic instruments, strings, and vocals precisely for this reason; the R-121 is sometimes preferred for electric guitars and brass where a less open top end is an advantage. The patented offset ribbon design (Patent #6,434,252) positions the ribbon element closer to the front of the housing for higher SPL handling from the logo side; the rear side captures a slightly brighter response at approximately three feet and closer (phase reversed in this position). The 200-ohm output impedance supports long cable runs without signal loss. Lifetime warranty to the original owner; first ribbon replacement free.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eActive Ribbon electronics: -36 dB sensitivity — condenser microphone output level\u003c\/li\u003e\n    \u003cli\u003eHand-wired discrete head amplifier with ultra-low-noise FETs and toroidal transformer (free gain)\u003c\/li\u003e\n    \u003cli\u003eSelf-noise below 18 dB\u003c\/li\u003e\n    \u003cli\u003eSwitchable -15 dB pad positioned before electronics — eliminates mic and preamp distortion at high SPL\u003c\/li\u003e\n    \u003cli\u003eSwitchable HPF: 100 Hz, 6 dB\/oct — proximity effect reduction and rumble suppression\u003c\/li\u003e\n    \u003cli\u003eBoth switches recessed and fully removed from signal path when disengaged\u003c\/li\u003e\n    \u003cli\u003eFaster transient response than R-121 — drum overheads, acoustic instruments, strings, vocals\u003c\/li\u003e\n    \u003cli\u003ePatented offset ribbon design (Patent #6,434,252) — high SPL front, brighter character rear\u003c\/li\u003e\n    \u003cli\u003eConstant optimal ribbon load impedance regardless of preamp\u003c\/li\u003e\n    \u003cli\u003e200-ohm output — long cable runs without HF loss\u003c\/li\u003e\n    \u003cli\u003eRibbon element protected from phantom power, electrical transients, miswired cables\u003c\/li\u003e\n    \u003cli\u003e2.5-micron aluminum ribbon (99.99% Al); rare earth Neodymium magnets\u003c\/li\u003e\n    \u003cli\u003eHand-wired and assembled in Burbank, California\u003c\/li\u003e\n    \u003cli\u003eLifetime warranty to original owner; first ribbon replacement free\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eAcoustic operating principle: electrodynamic pressure gradient with active electronics\u003c\/li\u003e\n    \u003cli\u003ePolar pattern: figure-8\u003c\/li\u003e\n    \u003cli\u003eGenerating element: 2.5-micron aluminum ribbon (99.99% Al)\u003c\/li\u003e\n    \u003cli\u003eMagnets: rare earth Neodymium\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 30–15,000 Hz +\/- 3 dB\u003c\/li\u003e\n    \u003cli\u003eSensitivity: -36 dB (re. 1V\/Pa +\/-1 dB)\u003c\/li\u003e\n    \u003cli\u003eSwitchable pad: -15 dB (pre-electronics)\u003c\/li\u003e\n    \u003cli\u003eSwitchable bass cut: 100 Hz, 6 dB per octave\u003c\/li\u003e\n    \u003cli\u003eSelf-noise: below 18 dB\u003c\/li\u003e\n    \u003cli\u003eOutput impedance: 200 ohms, balanced\u003c\/li\u003e\n    \u003cli\u003eRated load impedance: 1k ohm minimum\u003c\/li\u003e\n    \u003cli\u003eMaximum SPL: 135 dB @ 30 Hz\u003c\/li\u003e\n    \u003cli\u003eOutput connector: XLR 3-pin (Pin 2 Hot)\u003c\/li\u003e\n    \u003cli\u003ePower requirements: 48V phantom only, 4 mA\u003c\/li\u003e\n    \u003cli\u003eDimensions: 206 mm (L) x 25 mm (W)\u003c\/li\u003e\n    \u003cli\u003eWeight: 309 g (10.9 oz)\u003c\/li\u003e\n    \u003cli\u003eFinish: Burnished Satin Nickel; optional Matte Black Chrome\u003c\/li\u003e\n    \u003cli\u003eIncludes: R-122 MKII microphone, wooden case, mic sock\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Royer Labs","offers":[{"title":"Default Title","offer_id":53669833605457,"sku":"45602","price":1908.84,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/RoyerLabsR122mkII1.jpg?v=1778493844","url":"https:\/\/wrdtunes.com\/fr\/products\/royer-labs-r122-mkii","provider":"Wired Tunes","version":"1.0","type":"link"}