{"product_id":"polyend-press","title":"Polyend Press","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003ePolyend Press\u003c\/strong\u003e is a fully analog stereo compressor in a pedal enclosure, built around a VCA circuit. It works at the end of the chain, gluing a mix, a pedalboard or a drum bus together, and its stereo ins and outs mean it no longer has to sit in front of your time-based effects.\u003c\/p\u003e\n\u003ch3\u003eStereo compression where the pedalboard ends\u003c\/h3\u003e\n\u003cp\u003ePedal compressors usually work in mono and demand a slot at the start of the chain, which leaves reverb and delay running loose. Press takes a stereo signal on 6.3 mm jacks and closes the chain: reverb tails stop jumping, a synth stops climbing over everything else, and the level across the whole board evens out without losing depth.\u003c\/p\u003e\n\u003ch3\u003eA sidechain that decides what triggers it\u003c\/h3\u003e\n\u003cp\u003eHigh-pass and low-pass filters act on the detector signal only, so bass weight or a kick will not push the compressor into pumping, while the tone passing through stays untouched. A dedicated footswitch flips the detector between the signal itself and an external stereo source. A mix control gives you parallel compression, and the Tilt EQ lifts the top at the expense of the bottom, or the reverse, on the wet signal alone.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFully analog VCA path, compression without added colour\u003c\/li\u003e\n\u003cli\u003eStereo ins and outs for end-of-chain use\u003c\/li\u003e\n\u003cli\u003eVariable ratio from 2:1 up to limiting\u003c\/li\u003e\n\u003cli\u003eSeparate attack, release and threshold controls\u003c\/li\u003e\n\u003cli\u003eParallel compression via the mix control\u003c\/li\u003e\n\u003cli\u003eTilt EQ acting on the wet signal only\u003c\/li\u003e\n\u003cli\u003eHigh-pass and low-pass filters in the sidechain\u003c\/li\u003e\n\u003cli\u003eFootswitchable detector: internal signal or external stereo source\u003c\/li\u003e\n\u003cli\u003eAll-aluminium enclosure and knobs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: analog stereo VCA compressor\u003c\/li\u003e\n\u003cli\u003eInput: 6.3 mm jack stereo\/mono, maximum level 8 Vrms\u003c\/li\u003e\n\u003cli\u003eOutputs: 6.3 mm jack L\/mono and R\u003c\/li\u003e\n\u003cli\u003eSidechain: input and thru on 3.5 mm minijack\u003c\/li\u003e\n\u003cli\u003eInput impedance: line 20 kOhm, instrument 1 MOhm\u003c\/li\u003e\n\u003cli\u003eOutput impedance: 100 Ohm\u003c\/li\u003e\n\u003cli\u003eDistortion: below 0.1%\u003c\/li\u003e\n\u003cli\u003eNoise: below 0.001%\u003c\/li\u003e\n\u003cli\u003ePower: 9 V \/ 350 mA, adapter not included\u003c\/li\u003e\n\u003cli\u003eDimensions: 12.0 x 10.6 x 5.7 cm with knobs\u003c\/li\u003e\n\u003cli\u003eWeight: 0.6 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Polyend","offers":[{"title":"Default Title","offer_id":54625920254289,"sku":"60260","price":395.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/PolyendPress1.jpg?v=1787229033","url":"https:\/\/wrdtunes.com\/fr\/products\/polyend-press","provider":"Wired Tunes","version":"1.0","type":"link"}