{"product_id":"mackie-thumpsub-go","title":"Mackie THUMPSUB GO","description":"\u003cdiv lang=\"en\"\u003e\n\n\u003cp\u003e\u003cstrong\u003eMackie ThumpSub GO\u003c\/strong\u003e – a battery-powered portable \u003ca href=\"https:\/\/wrdtunes.com\/collections\/live-sound\"\u003esubwoofer\u003c\/a\u003e with dual 8\" custom woofers, a 400 W peak Class-D amplifier, two hot-swappable battery compartments (up to 12 hours total), Bluetooth 5.4 and dual XLR outputs. Frequency response (–3 dB): 39 Hz – 100 Hz. Maximum SPL: 123 dB.\u003c\/p\u003e\n\n\u003cp\u003eThe ThumpSub GO is Mackie's first battery-powered portable subwoofer – built for scenarios where mains power is unavailable or impractical: outdoor DJ sets, garden weddings, pop-up events and fully mobile PA rigs. The twin 8\" drivers sit in a slim enclosure with an ergonomic carry handle, making the unit easy to transport like a briefcase. It runs equally well vertically or horizontally – the low-profile form factor lets it slide under tables, stages or DJ stands, keeping it out of sightlines and foot traffic.\u003c\/p\u003e\n\n\u003ch3\u003eHot-swappable batteries and uninterrupted operation\u003c\/h3\u003e\n\n\u003cp\u003eTwo independent battery compartments accept GB-200 lithium-ion packs (8880 mAh, 11.1 V each). One battery delivers up to 6 hours of operation; two together reach up to 12 hours of continuous bass. The critical feature here is true hot-swap: when one battery depletes, a freshly charged pack slides in without powering the unit down – the music keeps playing without interruption. Charge time per battery is approximately 3 hours. One GB-200 is included; a second is sold separately. AC operation via an IEC cable (100–240 V~, 50–60 Hz) is also supported.\u003c\/p\u003e\n\n\u003ch3\u003ePA system integration and Bluetooth\u003c\/h3\u003e\n\n\u003cp\u003eTwo combo XLR\/TRS inputs (600 Ω balanced) accept signal from a mixer or active speaker. Two balanced XLR outputs pass the signal to connected full-range satellite speakers. High Pass mode activates a high-pass filter on the outputs, preventing the satellite speakers from reproducing frequencies below the crossover point – reducing compression and distortion in smaller drivers while allowing the sub to handle low frequencies optimally. Bluetooth 5.4 enables wireless streaming directly to the ThumpSub GO, with the signal then passed through to any connected speakers – even those without built-in Bluetooth. A phase switch (Normal\/Invert) and Stereo\/Mono output mode round out the configuration options.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e2× 8\" \/ 203 mm custom low-frequency drivers\u003c\/li\u003e\n  \u003cli\u003e400 W peak Class-D amplification, THD \u0026lt;1%\u003c\/li\u003e\n  \u003cli\u003eFrequency response (–3 dB): 39 Hz – 100 Hz\u003c\/li\u003e\n  \u003cli\u003eFrequency response (–10 dB): 32 Hz – 152 Hz\u003c\/li\u003e\n  \u003cli\u003eMaximum SPL: 123 dB peak\u003c\/li\u003e\n  \u003cli\u003eTwo hot-swappable Li-Ion GB-200 battery compartments (8880 mAh, 11.1 V each)\u003c\/li\u003e\n  \u003cli\u003eBattery life: up to 6 hours (1 battery) \/ up to 12 hours (2 batteries); charge time ~3 hours\u003c\/li\u003e\n  \u003cli\u003eOne GB-200 battery included; second battery optional\u003c\/li\u003e\n  \u003cli\u003eAC power: 100–240 V~, 50–60 Hz (detachable IEC cord included)\u003c\/li\u003e\n  \u003cli\u003eInputs: 2× combo XLR\/TRS (600 Ω balanced) + Bluetooth 5.4\u003c\/li\u003e\n  \u003cli\u003eOutputs: 2× balanced XLR (1 MΩ)\u003c\/li\u003e\n  \u003cli\u003eOutput modes: Full Range \/ High Pass; Stereo \/ Mono; Phase Normal \/ Invert\u003c\/li\u003e\n  \u003cli\u003eVertical or horizontal orientation; threaded pole cup for SPM400 speaker pole (optional)\u003c\/li\u003e\n  \u003cli\u003eErgonomic carry handle; slim profile for under-stage or under-table placement\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eLF drivers: 2× 8\" \/ 203 mm custom woofer\u003c\/li\u003e\n  \u003cli\u003eAmplifier power: 400 W peak, Class D, THD \u0026lt;1%\u003c\/li\u003e\n  \u003cli\u003eFrequency response (–3 dB): 39 Hz – 100 Hz\u003c\/li\u003e\n  \u003cli\u003eFrequency response (–10 dB): 32 Hz – 152 Hz\u003c\/li\u003e\n  \u003cli\u003eMaximum SPL: 123 dB peak\u003c\/li\u003e\n  \u003cli\u003eInputs: 2× XLR\/TRS combo (600 Ω balanced), Bluetooth 5.4\u003c\/li\u003e\n  \u003cli\u003eOutputs: 2× balanced XLR (output impedance 1 MΩ)\u003c\/li\u003e\n  \u003cli\u003eModes: Full Range \/ High Pass, Stereo \/ Mono, Normal \/ Invert phase\u003c\/li\u003e\n  \u003cli\u003eBluetooth: 5.4, audio streaming\u003c\/li\u003e\n  \u003cli\u003eBattery: Li-Ion GB-200, 8880 mAh, 11.1 V; up to 6 h (1 unit) \/ 12 h (2 units)\u003c\/li\u003e\n  \u003cli\u003eCharge time: ~3 hours per battery\u003c\/li\u003e\n  \u003cli\u003eAC power supply: 100–240 V~, 50–60 Hz, 75 W\u003c\/li\u003e\n  \u003cli\u003eOperating temperature: –10 to +45°C (14 to 113°F)\u003c\/li\u003e\n  \u003cli\u003eDimensions (H × W × D): 559 × 249 × 533 mm (22.0\" × 9.8\" × 21.0\")\u003c\/li\u003e\n  \u003cli\u003eWeight: 18.1 kg \/ 40.0 lb (no battery) · 18.9 kg \/ 41.7 lb (one battery)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"Mackie","offers":[{"title":"Default Title","offer_id":53445981077841,"sku":"59266","price":648.22,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/MackieTHUMPSUBGO1.jpg?v=1775551719","url":"https:\/\/wrdtunes.com\/fr\/products\/mackie-thumpsub-go","provider":"Wired Tunes","version":"1.0","type":"link"}