{"product_id":"fostex-t50rpmk3","title":"Fostex T50RPmk3","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eFostex T50RPmk3\u003c\/strong\u003e is the third generation of the T50RP — semi-open monitoring headphones built on a polyimide film diaphragm with copper foil etching and neodymium magnets. The mk3 debuted in 2015 as the successor to the mk2, introducing a redesigned diaphragm with improved damping, new low-rebound ear pads, and an updated headband. The same driver generation ran for nearly 10 years, becoming one of the most widely modified headphone platforms in planar magnetic history — its successor, the T50RPmk4, only delivered a genuinely new driver in 2024.\n\n\u003ch3\u003eThird-generation RP driver — monitoring characteristics\u003c\/h3\u003e\nAt 50 Ω and 92 dB\/mW (1 kHz, 1 mW), the mk3 has significantly higher drive requirements than the T50RPmk4 (28 Ω \/ 97 dB\/mW). A dedicated headphone amplifier is a practical requirement for professional monitoring work — the mk3 will not reach adequate SPL from a laptop headphone output or low-voltage audio interface. The mk3's flat frequency response neither flatters nor deceives: bass is accurate without colouration, the midrange is neutral, and the improved diaphragm damping relative to the mk2 reduced the characteristic dip around 4 kHz. Cable entry is left-cup only, via a proprietary locking 3.5 mm TRS socket — a fundamental wiring difference from the mk4, which has symmetrical sockets on both sides.\n\n\u003ch3\u003eT50RPmk3 as a modification platform\u003c\/h3\u003e\nNo headphone series has been modified as extensively as the T50RPmk3. A decade of community documentation — from simple pad swaps through damping modifications and acoustic tuning to full driver rebuilds — made the mk3 a reference point for the DIY audiophile community. The stock sound is neutral and monitoring-accurate, but requires amplification. Ear pad modifications (ZMF Ori, Dekoni Blue, and others) shift the bass profile and soundstage in predictable, well-documented ways. OEM replacement pads EX-EP-RPmk3 restore the factory acoustic profile when the originals wear out. The mk4 with its new driver is substantially more difficult to accidentally degrade through modification, but also less amenable to the deep acoustic tuning that relied on the mk3's low stock sensitivity as a starting point.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e3rd-generation RP driver — polyimide film diaphragm with copper foil etching, neodymium magnets\u003c\/li\u003e\n\u003cli\u003eSemi-open design — flat, accurate monitoring frequency response without tonal colouration\u003c\/li\u003e\n\u003cli\u003e50 Ω impedance \/ 92 dB\/mW sensitivity — dedicated headphone amplifier required for professional use\u003c\/li\u003e\n\u003cli\u003e3,000 mW maximum input tolerance — wide dynamic headroom with high-output amplifiers\u003c\/li\u003e\n\u003cli\u003eDetachable left-cup cable (locking 3.5 mm TRS) — 3 m cable with 6.3 mm plug and 1.2 m cable with 3.5 mm plug included\u003c\/li\u003e\n\u003cli\u003eLow-rebound ear pads — replaceable with OEM EX-EP-RPmk3\u003c\/li\u003e\n\u003cli\u003eEstablished modification platform — extensive community documentation and accessory ecosystem\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: T50RPmk3\u003c\/li\u003e\n\u003cli\u003eDriver type: Planar magnetic RP (Regular Phase), 3rd generation\u003c\/li\u003e\n\u003cli\u003eDiaphragm: Polyimide film with copper foil etching\u003c\/li\u003e\n\u003cli\u003eDesign: Semi-open\u003c\/li\u003e\n\u003cli\u003eImpedance: 50 Ω\u003c\/li\u003e\n\u003cli\u003eSensitivity: 92 dB\/mW (at 1 kHz, 1 mW)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 15 Hz – 35,000 Hz\u003c\/li\u003e\n\u003cli\u003eMaximum input power: 3,000 mW\u003c\/li\u003e\n\u003cli\u003eEarcup connector: Locking 3.5 mm TRS (left cup only)\u003c\/li\u003e\n\u003cli\u003eWeight: approx. 315 g (without cable)\u003c\/li\u003e\n\u003cli\u003eIncluded accessories: 3 m cable with 6.3 mm plug (black), 1.2 m cable with 3.5 mm plug (orange)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOSTEX","offers":[{"title":"Default Title","offer_id":53693023617361,"sku":"59503","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FostexT50RPmk31.jpg?v=1777977075","url":"https:\/\/wrdtunes.com\/fr\/products\/fostex-t50rpmk3","provider":"Wired Tunes","version":"1.0","type":"link"}