{"product_id":"aea-stereo-bars-arrays-lmh-4-or-6","title":"AEA Stereo Bars \u0026 Arrays LMH 4\" or 6\"","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eAEA Stereo Bars \u0026amp; Arrays LMH 4\" or 6\" — \u003c\/strong\u003ea long microphone hanger for suspending microphones from a hanging microphone cable, available in two lengths: 4\" (approx. 10 cm) and 6\" (approx. 15 cm), designed for dead-hang configurations in concert halls, theatres, and spaces where stand access is not possible.\u003c\/p\u003e\n\u003cp\u003eHanging microphones from cables above an orchestra, choir, or stage is standard practice wherever a stand cannot physically reach — below a church ceiling, over the front row of seating, between lighting rig members. Standard stand adapters are too short and provide no leverage for setting microphone angle in a suspended position. The AEA LMH addresses this directly: a rigid elongated adapter with a standard 5\/8\"-27 microphone thread at the lower end mounts to a cable or rigging line, and the microphone or SMP bar hangs below in dead-hang position. The choice between 4\" and 6\" depends on the clearance needed at the suspension point — the longer variant provides more freedom when routing breakout cables beneath the hanger and reduces the risk of cable contact with the supporting structure.\u003c\/p\u003e\n\u003ch3\u003eDead-Hang Without Improvisation\u003c\/h3\u003e\n\u003cp\u003eImprovised mic suspension on lighting clamps or purpose-wound cable loops is vibration-prone and geometrically unreliable. The LMH provides a dedicated mounting point with a 5\/8\"-27 thread — the same standard across all AEA SMP sliders, couplers, and adapters — meaning an SMP-S slider with a microphone, an AEA-CP coupler with a full stereo bar, or any standard microphone clip can be attached directly below it. Two zip ties securing the LMH body to the microphone cable is the standard technique used by orchestral and theatre recording engineers, and AEA designed the LMH specifically for this attachment method.\u003c\/p\u003e\n\u003ch3\u003eIntegration with SMP and Decca Tree Systems\u003c\/h3\u003e\n\u003cp\u003eThe LMH is particularly useful in combination with Decca Tree and SMP array configurations where the entire rig must hang above the stage without a stand. The 5\/8\"-27 thread on the LMH accepts an AEA-CP coupler directly, allowing a full 1-meter or 2-meter SMP bar to be suspended over an orchestra in dead-hang without any additional adapters. The 6\" variant provides extra clearance for routing the breakout cable beneath the bar, which matters practically in three-microphone Decca Tree setups where cable management at the suspension point is otherwise constrained.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo lengths:\u003c\/strong\u003e 4\" (approx. 10 cm) and 6\" (approx. 15 cm) — selection depends on suspension clearance and rigging geometry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\/8\"-27 thread\u003c\/strong\u003e — standard microphone thread, compatible with SMP-S sliders, AEA-CP couplers, and microphone clips from all manufacturers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDead-hang application\u003c\/strong\u003e — designed for suspension from microphone cable, rigging line, or structural members in spaces without stand access.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSMP\/Decca Tree integration\u003c\/strong\u003e — direct attachment point for AEA stereo bars and microphone arrays in suspended position.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSimple installation\u003c\/strong\u003e — attachment to cable via zip ties, no specialist tools required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e AEA LMH (Long Microphone Hanger)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Dead-hang microphone hanger\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable lengths:\u003c\/strong\u003e 4\" (approx. 10 cm) \/ 6\" (approx. 15 cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 5\/8\"-27 (standard microphone thread)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttachment method:\u003c\/strong\u003e Suspension from microphone cable (e.g. via zip ties)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatibility:\u003c\/strong\u003e All AEA microphones and accessories with 5\/8\" thread; SMP-S sliders, AEA-CP couplers, SMP bars, Decca Tree assemblies\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of manufacture:\u003c\/strong\u003e USA (Pasadena, CA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"AEA","offers":[{"title":"Default Title","offer_id":54069046772049,"sku":"50945","price":27.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/AEAStereoBars_ArraysLMH4_or6.jpg?v=1781521158","url":"https:\/\/wrdtunes.com\/fr\/products\/aea-stereo-bars-arrays-lmh-4-or-6","provider":"Wired Tunes","version":"1.0","type":"link"}