{"title":"Focusrite","description":"","products":[{"product_id":"focusrite-pro-clarett-2pre-usb","title":"Focusrite Pro Clarett+ 2Pré USB","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eFocusrite Clarett 2Pre USB\u003c\/strong\u003e — a compact 10-in \/ 4-out USB audio interface offering ultra-low noise preamps (-128 dB EIN), dynamic range up to 119 dB, 24-bit \/ 192 kHz conversion, ADAT input, and real-time plug-in monitoring with exceptionally low latency.\u003c\/p\u003e\n\n\u003cp\u003eThe Clarett 2Pre USB delivers Focusrite’s renowned sound quality in a solid and intuitive form. Two high-headroom combo inputs with Air mode emulate the classic ISA preamp, while ADAT input allows expansion with up to eight additional channels. The interface features anti-thump monitor outputs, a headphone out with dedicated level control, MIDI I\/O, and ultra-low latency performance—ideal for modern home and project studios on both Mac and PC. Included software packages from XLN Audio, Ableton, Softube, and Loopmasters make it a complete recording solution.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e10 inputs \/ 4 outputs via USB 2.0 or later\u003c\/li\u003e\n\u003cli\u003e2 Clarett mic\/line\/instrument inputs with ultra-low noise (-128 dB EIN)\u003c\/li\u003e\n\u003cli\u003eAir mode for ISA-style impedance and frequency response\u003c\/li\u003e\n\u003cli\u003eADAT input for up to 8 additional digital inputs\u003c\/li\u003e\n\u003cli\u003e119 dB dynamic range, 24-bit \/ 192 kHz AD\/DA conversion\u003c\/li\u003e\n\u003cli\u003e2 balanced line outputs with Anti-Thump technology\u003c\/li\u003e\n\u003cli\u003e1 headphone output with level control\u003c\/li\u003e\n\u003cli\u003e2 additional balanced line outputs\u003c\/li\u003e\n\u003cli\u003eMIDI In \/ Out\u003c\/li\u003e\n\u003cli\u003eUltra-low latency for real-time plug-in monitoring\u003c\/li\u003e\n\u003cli\u003eIncludes USB-A and USB-C cables for Mac\/PC connectivity\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMic preamp EIN: -128 dB\u003c\/li\u003e\n\u003cli\u003eDynamic range: Up to 119 dB\u003c\/li\u003e\n\u003cli\u003eBit depth: 24-bit\u003c\/li\u003e\n\u003cli\u003eSample rate: Up to 192 kHz\u003c\/li\u003e\n\u003cli\u003eMic\/Line\/Instrument inputs: 2 x XLR\/TRS combo\u003c\/li\u003e\n\u003cli\u003eAdditional inputs: 8 x ADAT (via optical)\u003c\/li\u003e\n\u003cli\u003eAnalog outputs: 2 x monitor out, 2 x line out, 1 x headphone out\u003c\/li\u003e\n\u003cli\u003eMIDI I\/O: 1 x In, 1 x Out\u003c\/li\u003e\n\u003cli\u003ePhantom power: Yes\u003c\/li\u003e\n\u003cli\u003eUSB connection: USB 2.0 (USB-A and USB-C cables included)\u003c\/li\u003e\n\u003cli\u003eBus powered: No (external power adapter included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":46825347613009,"sku":"50561","price":437.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteProClarett_2PreUSB1.jpg?v=1755090723"},{"product_id":"focusrite-pro-clarett-8pre-usb","title":"Focusrite Pro Clarett+ 8Pré USB","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eFocusrite Clarett+ 8Pre\u003c\/strong\u003e – 18-in \/ 20-out USB audio interface with 8 upgraded low-noise microphone preamps, JFET instrument inputs, Air mode, ADAT and S\/PDIF expansion, dual headphone outputs and Wordclock out. Compatible with Mac, Windows and iOS, powered via USB-C or included power supply.\u003c\/p\u003e\n\u003cp\u003eThe largest model in the Clarett+ range, Focusrite Clarett+ 8Pre is designed for serious multitrack recording setups. Its eight mic\/line\/instrument inputs with relay-controlled analog Air circuits offer pristine signal capture with selectable impedance and transparency inspired by the classic ISA preamps. The ultra-linear A\/D and D\/A conversion delivers up to 124 dB dynamic range on output with minimal distortion. A pair of JFET Hi-Z inputs preserves the natural character of guitars, while dual headphone outputs support independent monitoring.\u003c\/p\u003e\n\u003cp\u003eADAT and S\/PDIF inputs allow easy expansion with devices like Clarett OctoPre, and Wordclock output ensures tight sync in digital setups. Clarett+ 8Pre runs seamlessly on USB 2.0 and higher ports, with both USB-A and USB-C cables included. Combined with the Focusrite Control software, routing, monitor mixing, and device management become intuitive and powerful. Whether you're tracking a full band or building a hybrid hardware\/software studio, Clarett+ 8Pre delivers professional-grade performance and flexibility.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e18 inputs and 20 outputs including 8 mic\/line\/instrument inputs\u003c\/li\u003e\n\u003cli\u003eLow-noise Clarett+ mic preamps with analog Air circuit\u003c\/li\u003e\n\u003cli\u003eJFET instrument inputs for authentic amp-like response\u003c\/li\u003e\n\u003cli\u003eUp to 124 dB dynamic range on output\u003c\/li\u003e\n\u003cli\u003eDual headphone outputs with independent level control\u003c\/li\u003e\n\u003cli\u003eADAT and S\/PDIF I\/O for digital expansion\u003c\/li\u003e\n\u003cli\u003eWordclock out for clocking external gear\u003c\/li\u003e\n\u003cli\u003eUSB 3.2 interface compatible with USB 2.0 and higher\u003c\/li\u003e\n\u003cli\u003eWorks with Mac, Windows, and iOS\u003c\/li\u003e\n\u003cli\u003eIncludes both USB-A and USB-C cables\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eManufacturer: Focusrite\u003c\/li\u003e\n\u003cli\u003eOperating system: Win \/ Mac OS \/ iOS\u003c\/li\u003e\n\u003cli\u003eApplication area: Professional studio recording\u003c\/li\u003e\n\u003cli\u003eMic inputs: 8\u003c\/li\u003e\n\u003cli\u003eLine inputs: 8\u003c\/li\u003e\n\u003cli\u003eInstrument (Hi-Z) inputs: 2\u003c\/li\u003e\n\u003cli\u003eLine outputs: 10\u003c\/li\u003e\n\u003cli\u003eHeadphone outputs: 2\u003c\/li\u003e\n\u003cli\u003ePhantom power: 48V\u003c\/li\u003e\n\u003cli\u003eS\/PDIF coaxial in\/out: 1 \/ 1\u003c\/li\u003e\n\u003cli\u003eS\/PDIF optical in\/out: 1 \/ 1\u003c\/li\u003e\n\u003cli\u003eADAT in\/out: 1 \/ 1\u003c\/li\u003e\n\u003cli\u003eMIDI I\/O: Yes\u003c\/li\u003e\n\u003cli\u003eWordclock in\/out: No \/ Yes\u003c\/li\u003e\n\u003cli\u003eMaximum sampling rate: 192 kHz \/ 24-bit\u003c\/li\u003e\n\u003cli\u003eBus powered: No (external power supply included)\u003c\/li\u003e\n\u003cli\u003eUSB version: USB 3.2 (compatible with USB 2.0)\u003c\/li\u003e\n\u003cli\u003eDimensions (W x D x H): 482.5 × 291 × 43.9 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 4.08 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":46825347711313,"sku":"37340","price":869.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteProClarett_8PreUSB1.jpg?v=1755090763"},{"product_id":"focusrite-scarlett-18i20-3rd-gen","title":"Focusrite Scarlett 18i20 3ème génération","description":"\u003cp\u003e \u003cstrong\u003eFocusrite\u003c\/strong\u003e\u003c\/p\u003e Scarlett\u003cp\u003e \u003cstrong\u003e18i20 3e génération\u003c\/strong\u003e\u003c\/p\u003e Interface audio de haute qualité et améliorée\u003cp\u003e est une \u003cstrong\u003einterface audio USB robuste montable en rack\u003c\/strong\u003e avec \u003cstrong\u003edes entrées\u003c\/strong\u003e et \u003cstrong\u003esorties\u003c\/strong\u003e \u003cstrong\u003esimultanées\u003c\/strong\u003e complètes, comprenant un total de \u003cstrong\u003ehuit préamplis microphone, 18 entrées\u003c\/strong\u003e et \u003cstrong\u003e20 sorties.\u003c\/strong\u003e En plus de sa configuration facile, cette \u003cstrong\u003einterface audio de 19 pouces\u003c\/strong\u003e offre une excellente \u003cstrong\u003equalité sonore, une fonctionnalité de réseau d'ordres\u003c\/strong\u003e et \u003cstrong\u003edes circuits de haut-parleurs intégrés\u003c\/strong\u003e , tandis que diverses \u003cstrong\u003eaméliorations\u003c\/strong\u003e , notamment la conversion AD et DA, offrent des performances encore meilleures et un enregistrement et \u003cstrong\u003eune lecture\u003c\/strong\u003e \u003cstrong\u003enuancés\u003c\/strong\u003e jusqu'à à une résolution \u003cstrong\u003ede 24 bits\/192 kHz\u003c\/strong\u003e \u003cstrong\u003e.\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e Egalement à bord\u003c\/p\u003e sont \u003cp\u003e\u003cstrong\u003ehuit excellents\u003c\/strong\u003e \u003cstrong\u003epréamplificateurs de microphone Scarlett\u003c\/strong\u003e \u003cstrong\u003ede troisième génération\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e \u003cstrong\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e Ce qui est unique, c'est qu'un \u003cstrong\u003emode Air\u003c\/strong\u003e optionnel peut être ajouté pour \u003cstrong\u003ereproduire l'effet Air du\u003c\/strong\u003e préampli \u003cstrong\u003emicro ISA d'origine\u003c\/strong\u003e , si nécessaire. Cela peut conduire à un son plus ouvert et plus brillant. De plus, un \u003cstrong\u003epad\u003c\/strong\u003e sur chaque préampli \u003cstrong\u003emicro\u003c\/strong\u003e permet des niveaux de signal plus élevés sans écrêtage. Les deux \u003cstrong\u003eentrées instrument\u003c\/strong\u003e sur\u003c\/p\u003e le\u003cp\u003e \u003cstrong\u003ele panneau avant\u003c\/strong\u003e offre beaucoup d' \u003cstrong\u003eespace pour les écouteurs\u003c\/strong\u003e et permet \u003cstrong\u003eaux guitares\u003c\/strong\u003e\u003c\/p\u003e et\u003cp\u003e \u003cstrong\u003ebasses\u003c\/strong\u003e à\u003c\/p\u003e être\u003cp\u003e \u003cstrong\u003eenregistré\u003c\/strong\u003e sans écrêtage ni distorsion indésirable.\u003c\/p\u003e\n\u003cp\u003e Sans oublier les entrées \u003cstrong\u003ede bouclage\u003c\/strong\u003e virtuel pour l'enregistrement des signaux \u003cstrong\u003estéréo\u003c\/strong\u003e afin de permettre \u003cstrong\u003ele podcasting, le streaming en direct\u003c\/strong\u003e et \u003cstrong\u003el'échantillonnage.\u003c\/strong\u003e\u003cbr\u003e Mais la liste est plus longue !\u003cbr\u003e\u003c\/p\u003e Nouvelles fonctionnalités\u003cbr\u003e \u003cp\u003eDans l'ensemble, tous les utilisateurs de la série Scarlett bénéficient de performances audio améliorées. Les préamplificateurs micro Scarlett de 3ème génération sont désormais les préamplificateurs Scarlett offrant le meilleur son. Ils offrent non seulement un gain élevé, mais également un faible bruit pour un enregistrement stéréo soumis à des exigences élevées. De plus, les convertisseurs AD-DA 24 bits\/192 kHz, leaders du secteur, portent les performances à un nouveau niveau, garantissant un son plus clair avec plus de punch à toutes les fréquences.\u003cbr\u003e\u003c\/p\u003e « Air » - un son haut de gamme sur simple pression d'un boutonLe rafraîchi\u003cp\u003e les préamplis de microphone peuvent émuler l'effet Air du préampli de microphone ISA original de Focusrite à la demande, donnant aux enregistrements vocaux et acoustiques un son plus clair\u003c\/p\u003e .Introduction interactiveLe\u003cp\u003e l'outil dit QuickStart de Focusrite est intégré, guidant le client tout au long de l'enregistrement et de la configuration du logiciel et des pilotes.\u003c\/p\u003e Pilote USB avec une latence encore plus faibleLatency \u003cp\u003eest l'un des problèmes les plus courants lors de l'enregistrement, c'est pourquoi les pilotes USB ont été à nouveau repensés. Vous pouvez désormais enregistrer et écouter des morceaux en temps réel tout en ajoutant encore plus de plug-ins qu'auparavant.\u003c\/p\u003e Un progiciel dont on peut être fierJ'aime\u003cp\u003e générations précédentes, chaque produit Scarlett est livré avec un progiciel pour vous aider à démarrer du bon pied\u003c\/p\u003e loin.\u003cp\u003e Cette fois, les goodies suivants sont inclus :\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e Ableton Live 10 Lite\u003c\/li\u003e\n\n\u003cli\u003e Premier pack créatif Focusrite de Pro Tools\u003c\/li\u003e\n\n\u003cli\u003e Offre groupée temps et tonalité de Softube\u003c\/li\u003e\n\n\u003cli\u003e Suite de plug-ins Focusrite Red\u003c\/li\u003e\n\n\u003cli\u003e Une sélection de touches addictives de XLN Audio\u003c\/li\u003e\n\n\u003cli\u003e Adhésion à Focusrite Plug-In Collective avec accès à des logiciels gratuits et à des offres exclusives tous les deux mois\u003c\/li\u003e\n\n\u003cli\u003e 3 mois d'accès gratuit à Splice Sounds lors de l'enregistrement d'un nouveau compte Splice\u003c\/li\u003e\n\n\u003cli\u003e 2 ans de garantie\u003c\/li\u003e\n\n\u003cli\u003e support technique gratuit\u003c\/li\u003e\n\n\n\u003c\/ul\u003e Partenariat avec SpliceFocusrite \u003cp\u003eprésente un nouveau partenariat avec Splice, offrant aux clients de 3ème génération 3 mois d'accès gratuit à d'innombrables échantillons, boucles et préréglages libres de droits et de haute qualité - avec de nouvelles versions chaque jour. Que vous soyez débutant ou professionnel, Splice propose des sons dans tous les genres, de la pop mainstream aux mixtapes underground en passant par les bandes originales de films.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e Un abonnement Splice Sounds comprend :\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e ⦁ 100 crédits par mois - ceux-ci servent de « monnaie » et peuvent être « dépensés » en sons, générateurs de sons, préréglages et fichiers midi\u003c\/p\u003e\n\u003cp\u003e .\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e ⦁ Bibliothèque transparente avec la possibilité de trier par genre, instrument, tonalité, tempo et bien d'autres critères.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e ⦁ sorties de producteurs, designers sonores et artistes renommés\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e ⦁ inspiration de la communauté mondiale active de Splice\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e Focusrite Scarlett 18i20 3e génération :\u003cbr\u003e\u003cul\u003e\n\n\u003cli\u003e Interface audio USB\u003c\/li\u003e\n\n\u003cli\u003e idéal pour les petites configurations d'enregistrement multicanaux comme les groupes ou les performances live\u003c\/li\u003e\n\n\u003cli\u003e Avec par exemple le Focusrite Scarlett OctoPre extensible à 16 canaux micro\u003c\/li\u003e\n\n\u003cli\u003e USB Type-C, protocole : USB 2.0\u003c\/li\u003e\n\n\u003cli\u003e entrées et sorties simultanées : 18x8\u003c\/li\u003e\n\n\u003cli\u003e Bouclage\u003c\/li\u003e\n\n \u003cli\u003eCommutateur de moniteur : Oui\u003c\/li\u003e\n\n\u003cli\u003e Répondre\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e \u003cstrong\u003eEtendue de livraison supplémentaire :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e Câble USB (type CA)\u003c\/li\u003e\n\n\u003cli\u003e 1x alimentation\u003c\/li\u003e\n\n\u003cli\u003e Logiciel de production musicale Ableton Live-Lite\u003c\/li\u003e\n\n\u003cli\u003e Pro Tools d’abord\u003c\/li\u003e\n\n\u003cli\u003e Pack créatif Focusrite\u003c\/li\u003e\n\n\u003cli\u003e Abonnement de 3 mois à Splice Sounds gratuit pour les nouveaux comptes Splice\u003c\/li\u003e\n\n\u003cli\u003e Suite de plug-ins Focusrite Red 2 et 3\u003c\/li\u003e\n\n\u003cli\u003e Instrument logiciel avec 4 touches XLN Audio Addictive de votre choix\u003c\/li\u003e\n\n\u003cli\u003e Softube Time \u0026amp;amp, Pack de tonalités\u003c\/li\u003e\n\n\u003cli\u003e Accès au collectif de plug-ins Focusrite\u003c\/li\u003e\n\n\n\u003c\/ul\u003e Contenu de la livraison :\u003cul\u003e\u003cli\u003e Y compris l'adaptateur secteur : Oui\u003c\/li\u003e\u003c\/ul\u003e Avantages :\u003cul\u003e\n\n\u003cli\u003e Fabricant: Focusrite\u003c\/li\u003e\n\n\u003cli\u003e Système d'exploitation : Windows\/Mac OS\u003c\/li\u003e\n\n\u003cli\u003e Domaine d'application : Semi-professionnel\u003c\/li\u003e\n\n\u003cli\u003e Nombre de canaux : 18x20\u003c\/li\u003e\n\n\u003cli\u003e Nombre d'entrées microphone : 8\u003c\/li\u003e\n\n\u003cli\u003e Entrées de ligne : 8\u003c\/li\u003e\n\n\u003cli\u003e Entrée DI : 2\u003c\/li\u003e\n\n\u003cli\u003e Sorties en ligne : 10\u003c\/li\u003e\n\n\u003cli\u003e Entrées casque : 2\u003c\/li\u003e\n\n\u003cli\u003e Alimentation fantôme : Oui\u003c\/li\u003e\n\n\u003cli\u003e Entrée coaxiale S\/PDIF : 1\u003c\/li\u003e\n\n\u003cli\u003e Sortie coaxiale S\/PDIF : 1\u003c\/li\u003e\n\n\u003cli\u003e Entrée optique S\/PDIF : 1\u003c\/li\u003e\n\n\u003cli\u003e Sortie optique S\/PDIF : 1\u003c\/li\u003e\n\n\u003cli\u003e Entrée ADAT : 1\u003c\/li\u003e\n\n\u003cli\u003e Sortie ADAT : 1\u003c\/li\u003e\n\n\u003cli\u003e Interface MIDI : Oui\u003c\/li\u003e\n\n\u003cli\u003e Entrée Wordclock : Non\u003c\/li\u003e\n\n\u003cli\u003e Sortie Wordclock : Oui\u003c\/li\u003e\n\n\u003cli\u003e Taux d'échantillonnage maximum en kHz : 192\u003c\/li\u003e\n\n\u003cli\u003e Taux d'échantillonnage maximum en bits : 24\u003c\/li\u003e\n\n\u003cli\u003e Alimenté par bus : non\u003c\/li\u003e\n\n\u003cli\u003e y compris Adaptateur secteur : Oui\u003c\/li\u003e\n\n\u003cli\u003e Version USB : USB 2.0\u003c\/li\u003e\n\n\u003cli\u003e Largeur (mm):482,6\u003c\/li\u003e\n\n\u003cli\u003e Profondeur (mm):259,8\u003c\/li\u003e\n\n\u003cli\u003e Hauteur (mm):46,6\u003c\/li\u003e\n\n\u003cli\u003e Poids (kg):3,19\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":46825347875153,"sku":"40355","price":491.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteScarlett18i203rdgen1.jpg?v=1755091081"},{"product_id":"focusrite-scarlett-solo-4th-gen","title":"Focusrite Scarlett Solo 4e génération","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal Audio Apollo Solo USB\u003c\/strong\u003e – desktop audio interface with 2x4 I\/O, USB 3.0 connectivity, and real-time UAD plug-in processing. Includes Unison mic preamp emulations, 24-bit\/192 kHz conversion, and the Heritage Plug-In Bundle.\u003c\/p\u003e\n\u003cp\u003eDesigned for Windows-based studios, Apollo Solo USB delivers uncompromising analog tone in a compact format. Its Unison-enabled inputs recreate the impedance and gain staging of classic preamps and guitar amps from Neve, API, Fender, and more. The built-in UAD-2 SOLO DSP chip allows near-zero-latency tracking with vintage compressors, EQs, reverbs, and amp simulations – even at low buffer settings. Additionally, Solo USB includes a high-quality headphone output, onboard analog monitor mixing, and phantom power support.\u003c\/p\u003e\n\u003cp\u003eBundled with the Realtime Analog Classics and Heritage Edition plug-ins, Apollo Solo USB brings professional-grade tools to your desktop workflow. While the included LUNA software is Mac-only, the interface remains a powerful and flexible option for Windows users seeking elite audio performance.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x4 desktop USB 3.0 audio interface for Windows\u003c\/li\u003e\n\u003cli\u003e24-bit\/192 kHz AD\/DA conversion\u003c\/li\u003e\n\u003cli\u003e2 Unison-enabled combo inputs (mic\/line\/instrument)\u003c\/li\u003e\n\u003cli\u003e1 Hi-Z instrument input for authentic guitar amp emulations\u003c\/li\u003e\n\u003cli\u003eRealtime UAD plug-in processing with UAD-2 SOLO DSP\u003c\/li\u003e\n\u003cli\u003eIncludes Heritage Edition plug-in bundle\u003c\/li\u003e\n\u003cli\u003eAnalog monitor mixer for zero-latency monitoring\u003c\/li\u003e\n\u003cli\u003eHeadphone output with dedicated level control\u003c\/li\u003e\n\u003cli\u003e48V phantom power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConnectivity: USB 3.0 (Type-A or Type-C)\u003c\/li\u003e\n\u003cli\u003eComputer compatibility: Windows 10 64-bit\u003c\/li\u003e\n\u003cli\u003e2 mic\/line\/instrument inputs\u003c\/li\u003e\n\u003cli\u003e2 line outputs\u003c\/li\u003e\n\u003cli\u003e1 headphone output\u003c\/li\u003e\n\u003cli\u003e24-bit \/ 192 kHz maximum resolution\u003c\/li\u003e\n\u003cli\u003ePhantom power: Yes\u003c\/li\u003e\n\u003cli\u003eBus-powered: No (includes external power adapter)\u003c\/li\u003e\n\u003cli\u003eMIDI: Not supported\u003c\/li\u003e\n\u003cli\u003eWord Clock: Not supported\u003c\/li\u003e\n\u003cli\u003eSoftware included: LUNA DAW (Mac only), Heritage Plug-In Bundle, Realtime Analog Classics\u003c\/li\u003e\n\u003cli\u003eRequires Internet connection for software download and plug-in authorization\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":47128122556753,"sku":"52893","price":122.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteScarlettSolo4thGen1.jpg?v=1751978908"},{"product_id":"focusrite-scarlett-2i2-4th-gen","title":"Focusrite Scarlett 2i2 4e génération","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eFocusrite Scarlett 2i2 4th Gen\u003c\/strong\u003e – compact USB audio interface with 2 fourth-generation mic preamps, Hi-Z and line inputs, Auto Gain and Clip Safe functions, headphone output, USB-C connectivity, and loopback capability.\u003c\/p\u003e\n\u003cp\u003eThe Scarlett 2i2 4th Gen is a refined audio interface designed for musicians, producers, and creators, combining powerful AD\/DA converters with new features that simplify the recording process. Its upgraded mic preamps deliver up to 69 dB of gain, offering clean, dynamic sound for vocals and instruments. Hi-Z inputs allow direct connection of guitar or bass, while the Air mode adds brightness and presence to your recordings.\u003c\/p\u003e\n\u003cp\u003eAdvanced functions like Auto Gain and Clip Safe ensure ideal recording levels without distortion. Scarlett 2i2 also features loopback for capturing audio from your computer, perfect for streaming and sampling. Class-compliant operation means seamless compatibility with Mac, Windows, and USB-C iPads.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 fourth-generation mic preamps with up to 69 dB gain range\u003c\/li\u003e\n\u003cli\u003e2 Hi-Z instrument inputs for direct guitar\/bass connection\u003c\/li\u003e\n\u003cli\u003e2 line inputs for keyboards and synthesizers\u003c\/li\u003e\n\u003cli\u003eAir mode for brighter, more open sound\u003c\/li\u003e\n\u003cli\u003eAuto Gain function for automatic gain adjustment\u003c\/li\u003e\n\u003cli\u003eClip Safe prevents signal clipping\u003c\/li\u003e\n\u003cli\u003eLoopback for capturing computer audio\u003c\/li\u003e\n\u003cli\u003eHigh-quality headphone amp with loud, clear output\u003c\/li\u003e\n\u003cli\u003eUSB-C connectivity and bus-powered operation\u003c\/li\u003e\n\u003cli\u003eCompatible with Mac, Windows, and USB-C iPads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNumber of mic preamps: 2\u003c\/li\u003e\n\u003cli\u003ePhantom power: Yes\u003c\/li\u003e\n\u003cli\u003eInstrument inputs: 2\u003c\/li\u003e\n\u003cli\u003eLine inputs: 2\u003c\/li\u003e\n\u003cli\u003eLine outputs: 2\u003c\/li\u003e\n\u003cli\u003eHeadphone output: 1\u003c\/li\u003e\n\u003cli\u003eLoopback function: Yes\u003c\/li\u003e\n\u003cli\u003eAuto Gain and Clip Safe: Yes\u003c\/li\u003e\n\u003cli\u003eGain range: up to 69 dB\u003c\/li\u003e\n\u003cli\u003eDynamic range: 120 dB\u003c\/li\u003e\n\u003cli\u003eConverter resolution: 24-bit \/ 192 kHz\u003c\/li\u003e\n\u003cli\u003eInterface: USB 2.0 (USB-C connector)\u003c\/li\u003e\n\u003cli\u003ePower supply: USB bus-powered (900 mA)\u003c\/li\u003e\n\u003cli\u003eIncluded: USB-A to USB-C cable, Ableton Live Lite, 3-month Pro Tools Artist subscription, Hitmaker Expansion, 3-month Splice subscription\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":47128168300881,"sku":"52894","price":176.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteScarlett2i24thGen1.jpg?v=1751978324"},{"product_id":"focusrite-scarlett-solo-studio-4th-gen","title":"Focusrite Scarlett Solo Studio 4e génération","description":"","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":47128203526481,"sku":"52895","price":233.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/Focusrite_Scarlett_Solo_Bundle_4K.png?v=1693392900"},{"product_id":"focusrite-scarlett-2i2-studio-4th-gen","title":"Focusrite Scarlett 2i2 Studio 4e génération","description":"","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":47128231936337,"sku":"52896","price":275.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/Focusrite_Scarlett_2i2_Bundle_4K.png?v=1693393211"},{"product_id":"focusrite-vocaster-one","title":"Focusrite Vocaster Un","description":null,"brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":47139574153553,"sku":"48087","price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/products\/focusrite-vocaster-one-podcast-usb-audio-interface_1_PCM0017400-000_da8f670f-463c-489d-ae47-7d8e91437bcc.jpg?v=1693577574"},{"product_id":"focusrite-scarlett-4i4-4th-gen","title":"FOCUSRITE Scarlett 4i4 4e génération","description":"Interface audio USB 2.0 à 4 canaux avec connecteur USB-C\u003cul\u003e\n\n \u003cli\u003e24 bits \/ 192 kHz\u003c\/li\u003e\n\u003cli\u003e Convertisseurs Focusrite série Rednet avec plage dynamique de 120 dB\u003c\/li\u003e\n\u003cli\u003e 2 préamplis micro Scarlett avec gain de 69 dB\u003c\/li\u003e\n\u003cli\u003e Alimentation fantôme +48 V\u003c\/li\u003e\n\u003cli\u003e Fonction Air commutable\u003c\/li\u003e\n\u003cli\u003e Gain automatique, sécurité des clips\u003c\/li\u003e\n\u003cli\u003e Fonction de bouclage\u003c\/li\u003e\n\u003cli\u003e Dynamic Gain Halos pour un réglage rapide et facile du volume d'enregistrement\u003c\/li\u003e\n\u003cli\u003e 2x Entrée micro \/ instrument \/ ligne XLR \/ combo jack 6,3 mm symétrique\u003c\/li\u003e\n\u003cli\u003e 2 entrées ligne : jack 6,3 mm\u003c\/li\u003e\n\u003cli\u003e 4 sorties ligne : jack 6,3 mm symétrique\u003c\/li\u003e\n\u003cli\u003e Sortie casque stéréo : jack 6,3 mm\u003c\/li\u003e\n\u003cli\u003e Entrée et sortie MIDI\u003c\/li\u003e\n\u003cli\u003e Port USB Type-C\u003c\/li\u003e\n\u003cli\u003e Pour PC\/Mac\u003c\/li\u003e\n\u003cli\u003e Dimensions (L x H x P) : 180 x 59 x 129 mm\u003c\/li\u003e\n\u003cli\u003e Poids. 0,808 kg (xx livres)\u003c\/li\u003e\n\u003cli\u003e Comprend un câble USB (type C vers A) et un ensemble de logiciels d'extension Hitmaker (Ableton Live Lite, 3 mois d'abonnement à Splice Sounds et un ensemble de plug-ins pour l'écriture, le mixage et le mastering, Pro Tools Artist (abonnement de 3 mois) et un ensemble complet de plug-ins Avid.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e Plugins d'extension Hitmaker :\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e LANDR - Outil de mastering basé sur l'IA (abonnement de deux mois)\u003c\/li\u003e\n\u003cli\u003e Softube Marshall Silver Jubilee 2555 - Sim d'ampli\u003c\/li\u003e \u003cli\u003ePiano à queue XLN Audio Addictive Keys Studio ? Instruments à clavier virtuel\u003c\/li\u003e\n\u003cli\u003e XLN Audio Addictive Drums 2: Studio Rock - Bibliothèque de batterie virtuelle\u003c\/li\u003e\n\u003cli\u003e Antares Auto-Tune Access - Réglage vocal\u003c\/li\u003e\n\u003cli\u003e Brainworx Bx_console Focusrite SC - Bande de canaux\u003c\/li\u003e\n\u003cli\u003e Suite de plug-ins Focusrite Red 2 \u0026amp; 3 - EQ et compresseur\u003c\/li\u003e\n\u003cli\u003e Les essentiels du LX480 de Relab - Reverb\u003c\/li\u003e\n\u003cli\u003e Native Instruments Équilibreur MASSIVE et RAPIDE \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ciframe width=\"100%\" height=\"480\" src=\"https:\/\/www.youtube.com\/embed\/ujTcpgg5PuU\" frameborder=\"0\"\u003e\u003c\/iframe\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":47729199481169,"sku":"52897","price":280.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FOCUSRITEScarlett4i44thGen1.jpg?v=1753732862"},{"product_id":"focusrite-clarett-plus-4pre-usb","title":"Focusrite Clarett plus 4Pré USB","description":"Interface audio USB 2.0\u003cul\u003e\n\n\u003cli\u003e 24 bits \/ 192 kHz\u003c\/li\u003e\n\u003cli\u003e 18 entrées et 8 sorties\u003c\/li\u003e\n\u003cli\u003e 4 préamplis micro Clarett avec mode air modélisant le son classique du préampli micro ISA110\u003c\/li\u003e\n\u003cli\u003e Alimentation fantôme +48 V commutable\u003c\/li\u003e\n\u003cli\u003e 4 entrées micro\/ligne : combo XLR\/jack 6,3 mm (dont 2 pouvant être utilisées comme entrées instrument)\u003c\/li\u003e\n\u003cli\u003e 4 entrées ligne : jack 6,3 mm\u003c\/li\u003e\n\u003cli\u003e 4 sorties ligne : jack 6,3 mm\u003c\/li\u003e\n\u003cli\u003e Entrée\/sortie MIDI\u003c\/li\u003e\n\u003cli\u003e Entrée ADAT\u003c\/li\u003e\n\u003cli\u003e Entrée et sortie S\/PDIF coaxiales\u003c\/li\u003e\n\u003cli\u003e 2 sorties casque stéréo : jack 6,3 mm\u003c\/li\u003e\n\u003cli\u003e Connecteur USB-C\u003c\/li\u003e\n\u003cli\u003e Boîtier de bureau\u003c\/li\u003e\n\u003cli\u003e Dimensions (L x H x P) : 222 x 63,5 x 192 mm\u003c\/li\u003e\n\u003cli\u003e Poids : 1,61 kg\u003c\/li\u003e \u003cli\u003eIncl. 2 câbles USB (USB standard et USB Type-C) et ensemble de logiciels d'extension Hitmaker (Ableton Live Lite, Pro Tools Artist (abonnement de trois mois) et ensemble complet de plug-ins Avid)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e Plug-ins d'extension Hitmaker :\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e LANDR - Outil de mastering basé sur l'IA (abonnement de deux mois)\u003c\/li\u003e\n\u003cli\u003e Softube Marshall Silver Jubilee 2555 - Sim d'ampli\u003c\/li\u003e\n\u003cli\u003e XLN Audio Addictive Keys - Instruments à clavier virtuel\u003c\/li\u003e\n\u003cli\u003e XLN Audio Addictive Drums 2: Studio Rock - Bibliothèque de batterie virtuelle\u003c\/li\u003e\n\u003cli\u003e Antares Auto-Tune Access - Réglage vocal\u003c\/li\u003e\n\u003cli\u003e Brainworx Bx_console Focusrite SC - Tranche de console\u003c\/li\u003e\n\u003cli\u003e Suite de plug-ins Focusrite Red 2 \u0026amp; 3 - EQ et compresseur\u003c\/li\u003e\n\u003cli\u003e Les essentiels du LX480 de Relab - Reverb \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ciframe width=\"100%\" height=\"480\" src=\"https:\/\/www.youtube.com\/embed\/42j5J7D_50Y\" frameborder=\"0\"\u003e\u003c\/iframe\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":47792661135697,"sku":"50560","price":576.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteClarettplus4PreUSB1.jpg?v=1753732715"},{"product_id":"focusrite-scarlett-16i16-4th-gen","title":"Focusrite Scarlett 16i16 4th Gen","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eFocusrite Scarlett 16i16 4th Gen\u003c\/strong\u003e is a 16-in \/ 16-out USB-C audio interface designed for artists and producers who need premium-quality conversion, versatile routing, and full integration with analog and digital gear. It features two 4th Gen mic\/instrument preamps with 69 dB gain, professional-grade 24-bit \/ 192 kHz converters from Focusrite’s RedNet range, and extensive I\/O including ADAT, S\/PDIF, MIDI, and word clock.\u003c\/p\u003e\n\u003cp\u003eWhether you’re working with outboard processors, synthesizers, or hybrid setups, Scarlett 16i16 is an ideal centerpiece. The Auto Gain and Clip Safe features ensure clean, distortion-free recording, while the updated Air mode adds presence and harmonic character to vocals and acoustic instruments. Focusrite Control 2 software makes managing complex routing and preamp settings fast and intuitive, with mobile app support for remote control.\u003c\/p\u003e\n\u003cp\u003eWith powerful headphone amps, low-latency monitoring, and an impressive software bundle including Ableton Live Lite, Auto-Tune Access, and XLN Audio instruments, Scarlett 16i16 is a complete production hub tailored for demanding creative environments.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16 inputs and 16 outputs: mic, line, instrument, ADAT, S\/PDIF, MIDI\u003c\/li\u003e\n\u003cli\u003e2 x 4th Gen mic\/instrument preamps with 69 dB gain\u003c\/li\u003e\n\u003cli\u003eAuto Gain and Clip Safe to set levels and prevent distortion\u003c\/li\u003e\n\u003cli\u003eRedesigned Air mode with Presence and Harmonic Drive\u003c\/li\u003e\n\u003cli\u003e24-bit \/ 192 kHz conversion with 122 dB dynamic range\u003c\/li\u003e\n\u003cli\u003eFocusrite Control 2 desktop and mobile app for advanced routing\u003c\/li\u003e\n\u003cli\u003e2 high-powered independent headphone amps\u003c\/li\u003e\n\u003cli\u003eA\/B speaker switching and integrated talkback mic\u003c\/li\u003e\n\u003cli\u003eLoopback functionality for streaming and internal capture\u003c\/li\u003e\n\u003cli\u003eIncluded software: Ableton Live Lite, Pro Tools Artist (3 months), Splice, Auto-Tune Access, Native Instruments MASSIVE, XLN Audio, and more\u003c\/li\u003e\n\u003cli\u003eEasy Start tool for guided setup and driver installation\u003c\/li\u003e\n\u003cli\u003eCompatible with macOS, Windows, USB-C iPads, and Chromebooks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMic preamps: 2 (independent phantom power)\u003c\/li\u003e\n\u003cli\u003eInstrument inputs: 2 x 1\/4\" Hi-Z\u003c\/li\u003e\n\u003cli\u003eLine inputs: 6 x 1\/4\"\u003c\/li\u003e\n\u003cli\u003eLine outputs: 4 x 1\/4\"\u003c\/li\u003e\n\u003cli\u003eHeadphone outputs: 2 x 1\/4\"\u003c\/li\u003e\n\u003cli\u003eADAT I\/O: 1 In \/ 1 Out\u003c\/li\u003e\n\u003cli\u003eS\/PDIF I\/O: 1 In \/ 1 Out (Coaxial)\u003c\/li\u003e\n\u003cli\u003eMIDI I\/O: 1 In \/ 1 Out (5-pin DIN)\u003c\/li\u003e\n\u003cli\u003eLoopback: Yes\u003c\/li\u003e\n\u003cli\u003eAir mode: Yes\u003c\/li\u003e\n\u003cli\u003eAuto Gain: Yes\u003c\/li\u003e\n\u003cli\u003eClip Safe: Yes\u003c\/li\u003e\n\u003cli\u003eConnectivity: USB-C (USB 2.0 protocol)\u003c\/li\u003e\n\u003cli\u003eSimultaneous I\/O: 18 x 18 (including Loopback)\u003c\/li\u003e\n\u003cli\u003eResolution: 24-bit \/ 192 kHz\u003c\/li\u003e\n\u003cli\u003eBus powered: Yes (USB 5V @ 3A)\u003c\/li\u003e\n\u003cli\u003eExternal power supply: 5V @ 3A (included)\u003c\/li\u003e\n\u003cli\u003eForm factor: Desktop\u003c\/li\u003e\n\u003cli\u003eSoftware compatibility: macOS, Windows, USB-C iPads, Chromebooks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":49420199985489,"sku":"54756","price":362.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteScarlett16i164thGen1.jpg?v=1755089398"},{"product_id":"focusrite-scarlett-18i20-4th-gen","title":"Focusrite Scarlett 18i20 4th Gen","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eFocusrite Scarlett 18i20 4th Gen\u003c\/strong\u003e is a professional USB-C audio interface with 18 inputs and 20 outputs, featuring eight 4th-generation mic preamps, two Hi-Z instrument inputs, eight line inputs, ADAT, S\/PDIF, MIDI, Word Clock, two headphone outputs, and full support via Focusrite Control 2 software. It’s the perfect centerpiece for modern music studios and demanding producers.\u003c\/p\u003e\n\n\u003cp\u003eThis next-generation Scarlett delivers outstanding audio quality with 24-bit\/192 kHz converters derived from the RedNet series, boasting 122 dB of dynamic range. Auto Gain and Clip Safe functions ensure optimal recording levels and prevent clipping. The redesigned Air mode adds presence and harmonic richness to vocals and instruments. Two newly designed, powerful headphone amps easily drive high-impedance headphones with clarity and punch.\u003c\/p\u003e\n\n\u003cp\u003eWith extensive analog and digital I\/O and intuitive control via Focusrite Control 2 (desktop and mobile), Scarlett 18i20 is ideal for integrating DAW setups with outboard gear, effects, and monitoring. Included software packages like Ableton Live Lite, Auto-Tune Access, Native Instruments MASSIVE, and XLN Addictive Drums make it a complete production hub out of the box.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e18 inputs and 20 outputs: 8 mic preamps, 2 Hi-Z inputs, 8 line inputs, ADAT, S\/PDIF, MIDI, Word Clock\u003c\/li\u003e\n  \u003cli\u003e4th-generation mic preamps with 69 dB gain range\u003c\/li\u003e\n  \u003cli\u003eAuto Gain and Clip Safe functions for clean and safe recording\u003c\/li\u003e\n  \u003cli\u003eAir mode with Presence and Harmonic Drive options\u003c\/li\u003e\n  \u003cli\u003e24-bit \/ 192 kHz conversion with 122 dB dynamic range\u003c\/li\u003e\n  \u003cli\u003e2 independent headphone outputs with high-powered amplifiers\u003c\/li\u003e\n  \u003cli\u003eA\/B speaker switching and built-in talkback mic\u003c\/li\u003e\n  \u003cli\u003eLoopback functionality for streaming and internal routing\u003c\/li\u003e\n  \u003cli\u003eFull control via Focusrite Control 2 software (desktop and mobile)\u003c\/li\u003e\n  \u003cli\u003eIncluded software: Ableton Live Lite, Pro Tools Artist (3 months), Splice, Auto-Tune Access, XLN Audio, Softube, Relab, more\u003c\/li\u003e\n  \u003cli\u003eCompatible with macOS, Windows, USB-C iPads, and Chromebooks\u003c\/li\u003e\n  \u003cli\u003eEasy Start tool for quick and guided setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMic preamps: 8 (independent phantom power)\u003c\/li\u003e\n  \u003cli\u003eInstrument inputs: 2 x 1\/4\" Hi-Z\u003c\/li\u003e\n  \u003cli\u003eLine inputs: 8\u003c\/li\u003e\n  \u003cli\u003eLine outputs: 10 x 1\/4\"\u003c\/li\u003e\n  \u003cli\u003eHeadphone outputs: 2 x 1\/4\"\u003c\/li\u003e\n  \u003cli\u003eADAT inputs: 2\u003c\/li\u003e\n  \u003cli\u003eADAT outputs: 2\u003c\/li\u003e\n  \u003cli\u003eS\/PDIF I\/O: 1 In \/ 1 Out (Coaxial)\u003c\/li\u003e\n  \u003cli\u003eMIDI I\/O: 1 In \/ 1 Out (5-pin DIN)\u003c\/li\u003e\n  \u003cli\u003eWord Clock output: Yes\u003c\/li\u003e\n  \u003cli\u003eLoopback: Yes\u003c\/li\u003e\n  \u003cli\u003eAir mode: Yes\u003c\/li\u003e\n  \u003cli\u003eAuto Gain: Yes\u003c\/li\u003e\n  \u003cli\u003eClip Safe: Yes\u003c\/li\u003e\n  \u003cli\u003eConnectivity: USB-C (USB 2.0 protocol)\u003c\/li\u003e\n  \u003cli\u003eSimultaneous I\/O: 20 x 24 (including Loopback)\u003c\/li\u003e\n  \u003cli\u003eResolution: 24-bit \/ 192 kHz\u003c\/li\u003e\n  \u003cli\u003eBus power: Yes (USB 5V @ 3A)\u003c\/li\u003e\n  \u003cli\u003eExternal power supply: 5V @ 3A (included)\u003c\/li\u003e\n  \u003cli\u003eForm factor: Desktop \/ Rackmount (1U)\u003c\/li\u003e\n  \u003cli\u003eSoftware compatibility: macOS, Windows, USB-C iPads, Chromebooks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":49422116782417,"sku":"54758","price":656.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteScarlett18i204thGen1.jpg?v=1755089339"},{"product_id":"focusrite-scarlett-18i16-4th-gen","title":"Focusrite Scarlett 18i16 4th Gen","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eFocusrite Scarlett 18i16 4th Gen\u003c\/strong\u003e is an 18-in \/ 16-out USB-C audio interface with four 4th-generation mic preamps, two Hi-Z instrument inputs, eight line inputs, ADAT, S\/PDIF, MIDI I\/O, and dual headphone outputs — designed for producers and studios that demand connectivity, professional-grade sound, and intuitive control.\u003c\/p\u003e\n\u003cp\u003eEquipped with converters from Focusrite’s flagship RedNet range and featuring up to 69 dB of gain on its mic preamps, the Scarlett 18i16 captures everything from delicate vocals to loud instruments with exceptional detail. Auto Gain and Clip Safe ensure optimal levels, allowing you to stay focused on performance. With its wide array of analog and digital I\/O, the 18i16 is the perfect hub for integrating outboard gear, synthesizers, and effects into your DAW setup.\u003c\/p\u003e\n\u003cp\u003eThanks to redesigned Air mode, high-resolution converters (24-bit \/ 192 kHz), ultra-low latency monitoring, and professional headphone amps, Scarlett 18i16 offers performance that goes far beyond its class. The Focusrite Control 2 software (for desktop and mobile) offers full control over routing, gain, and monitoring. Included software like Ableton Live Lite, Pro Tools Artist (3-month trial), Auto-Tune Access, and more gives you everything you need to start creating immediately.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e18 inputs \/ 16 outputs including 4 mic preamps, 2 Hi-Z inputs, 8 line inputs, ADAT, S\/PDIF, and MIDI\u003c\/li\u003e\n\u003cli\u003e4th-gen mic preamps with 69 dB of gain and enhanced Air mode with Presence and Harmonic Drive\u003c\/li\u003e\n\u003cli\u003eAuto Gain sets ideal input levels automatically\u003c\/li\u003e\n\u003cli\u003eClip Safe prevents distortion by adjusting gain in real-time\u003c\/li\u003e\n\u003cli\u003e24-bit \/ 192 kHz converters with 120 dB dynamic range\u003c\/li\u003e\n\u003cli\u003e2 high-power headphone outputs for high-impedance headphones\u003c\/li\u003e\n\u003cli\u003eLoopback support for streaming and virtual routing\u003c\/li\u003e\n\u003cli\u003eUSB-C connection with USB 2.0 protocol (bus-powered)\u003c\/li\u003e\n\u003cli\u003eIncludes Focusrite Control 2 desktop and mobile apps\u003c\/li\u003e\n\u003cli\u003eIncludes Ableton Live Lite, 3-month Pro Tools Artist, Auto-Tune Access, Splice, and more\u003c\/li\u003e\n\u003cli\u003eEasy Start tool for quick setup and software integration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMic Preamps: 4 (with independent phantom power)\u003c\/li\u003e\n\u003cli\u003eInstrument Inputs: 2 x 1\/4\" Hi-Z\u003c\/li\u003e\n\u003cli\u003eLine Inputs: 8\u003c\/li\u003e\n\u003cli\u003eLine Outputs: 4 x 1\/4\"\u003c\/li\u003e\n\u003cli\u003eHeadphone Outputs: 2 x 1\/4\"\u003c\/li\u003e\n\u003cli\u003eADAT I\/O: 1 In \/ 1 Out\u003c\/li\u003e\n\u003cli\u003eS\/PDIF I\/O: 1 In \/ 1 Out (Coaxial)\u003c\/li\u003e\n\u003cli\u003eMIDI I\/O: 1 In \/ 1 Out (5-pin DIN)\u003c\/li\u003e\n\u003cli\u003eLoopback: Yes\u003c\/li\u003e\n\u003cli\u003eConnectivity: USB-C (USB 2.0 protocol)\u003c\/li\u003e\n\u003cli\u003eSimultaneous I\/O: 20 x 18 (including Loopback)\u003c\/li\u003e\n\u003cli\u003eResolution: 24-bit \/ 192 kHz\u003c\/li\u003e\n\u003cli\u003eAir Mode: Yes\u003c\/li\u003e\n\u003cli\u003eAuto Gain: Yes\u003c\/li\u003e\n\u003cli\u003eClip Safe: Yes\u003c\/li\u003e\n\u003cli\u003eBus Powered: Yes (USB 5V @ 3A)\u003c\/li\u003e\n\u003cli\u003eExternal PSU: Included (5V @ 3A)\u003c\/li\u003e\n\u003cli\u003eOS Compatibility: macOS, Windows, iPad (USB-C), Chromebooks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":49422157873489,"sku":"54757","price":468.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteScarlett18i164thGen1.jpg?v=1755089286"},{"product_id":"focusrite-rednet-tnx","title":"Focusrite RedNet TNX","description":"\u003c!-- ENGLISH VERSION --\u003e\n\u003cp\u003e\u003cstrong\u003eFocusrite RedNet TNX\u003c\/strong\u003e – 128-channel Dante interface with Thunderbolt connectivity, ultra-low latency, upgradeable to 256 channels, ideal for immersive audio and broadcast setups.\u003c\/p\u003e\n\u003cp\u003eThe RedNet TNX by Focusrite is a professional Dante audio interface designed for demanding immersive and networked audio workflows. Offering 128 x 128 Dante channels at 24-bit\/192kHz and Thunderbolt connectivity with ultra-low round-trip latency, the unit supports seamless integration into studios, live rigs, or post-production suites. Its dual RJ-45 ports enable either redundant or daisy-chain configurations, ensuring maximum system reliability. With support for AES67 and SMPTE ST 2110 (including DDM), RedNet TNX is fully future-proof for AoIP environments. It is compatible with both macOS (Intel and Apple Silicon) and Windows systems. Upgradeable to 256 x 256 channels at 96 kHz via Dante Ready, this compact yet powerful interface is ideal for Dolby Atmos workflows and large-format installations.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e128 x 128 Dante audio channels at 24-bit\/192kHz (expandable to 256 x 256 at 96kHz)\u003c\/li\u003e\n\u003cli\u003eThunderbolt™ connectivity with ultra-low latency\u003c\/li\u003e\n\u003cli\u003eCompatible with macOS (Intel \u0026amp; Apple Silicon) and Windows\u003c\/li\u003e\n\u003cli\u003eDual RJ-45 Ethernet ports for redundancy or daisy-chaining\u003c\/li\u003e\n\u003cli\u003eSupport for AES67 and SMPTE ST 2110 (with DDM)\u003c\/li\u003e\n\u003cli\u003eIntegrated network interface for centralized control\u003c\/li\u003e\n\u003cli\u003eCompact and mobile – ideal for studio, live, or post-production\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAudio Resolution: up to 24-bit \/ 192 kHz\u003c\/li\u003e\n\u003cli\u003eDante Channels: 128 x 128 (expandable to 256 x 256)\u003c\/li\u003e\n\u003cli\u003eConnection: Thunderbolt™ (single cable for audio + control)\u003c\/li\u003e\n\u003cli\u003eNetwork: 2 x RJ-45 (redundancy or daisy-chain)\u003c\/li\u003e\n\u003cli\u003eAoIP Compatibility: AES67, SMPTE ST 2110 (with DDM)\u003c\/li\u003e\n\u003cli\u003eCompatibility: macOS (Intel \u0026amp; Apple Silicon), Windows\u003c\/li\u003e\n\u003cli\u003eIncluded: Thunderbolt cable, Ethernet cable, power cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":51186733285713,"sku":"57267","price":2162.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteRedNetTNX1.jpg?v=1748459849"},{"product_id":"focusrite-isa-c8x","title":"Focusrite ISA C8X","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eFocusrite ISA C8X\u003c\/strong\u003e – a professional \u003ca href=\"https:\/\/wrdtunes.com\/collections\/audio-interfaces\"\u003eaudio interface\u003c\/a\u003e with 26 inputs and 28 outputs over USB-C, housed in a 2U rackmount chassis — and the first interface ever released under the ISA name. The two ISA preamps at its core carry the same Lundahl LL1538 transformer that Rupert Neve selected for the original 1985 ISA 110 commission. Six additional ultra-low-noise Focusrite preamps, RedNet-class 24-bit\/192kHz AD\/DA conversion, and full remote control via Focusrite Control 2 round out the spec.\u003c\/p\u003e\n\n  \u003ch3\u003eTransformer character and all-analogue tone shaping\u003c\/h3\u003e\n  \u003cp\u003eBoth ISA preamps deliver up to 79 dB of gain with switchable input impedance, balanced inserts, and a variable high-pass filter — covering everything from ribbons and passive dynamics to condenser mics without compromise. Two relay-switched analogue modes extend the tonal range: Console Mode introduces variable soft-clipping for saturation and low-end weight, while 430 Air Mode — ported directly from the ISA 430 MkII — lifts the top end through an inductor-based high-shelf filter. Both modes are active on the two front-panel instrument DI inputs as well, which share the full transformer signal path.\u003c\/p\u003e\n\n  \u003ch3\u003eA permanent I\/O hub, not just an interface\u003c\/h3\u003e\n  \u003cp\u003eISA C8X is built for fixed installations and patchbay rigs: dedicated mic and line inputs on all eight channels mean outboard gear stays connected between sessions. Twelve balanced line outputs handle monitoring from mono through to 7.1.4 across three independently switchable monitor groups — controllable from the front panel or the app. ADAT expansion adds up to 16 channels, and Word Clock, S\/PDIF, and MIDI complete the connectivity picture. Auto Gain across all eight preamps simultaneously handles multi-mic setups — drums in particular — in seconds. The RedNet-derived converters post 125 dB of dynamic range with 0.00022% THD. Standalone mode keeps audio passing even without a connected computer.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e2 ISA transformer preamps with Lundahl LL1538, up to 79 dB gain\u003c\/li\u003e\n    \u003cli\u003e6 Focusrite mic preamps with up to 69 dB gain and analogue Air mode\u003c\/li\u003e\n    \u003cli\u003eConsole Mode and 430 Air Mode — fully analogue, relay-switched tone circuits\u003c\/li\u003e\n    \u003cli\u003eBalanced inserts on ISA channels, switchable impedance, variable HPF\u003c\/li\u003e\n    \u003cli\u003eAuto Gain across all 8 preamps simultaneously\u003c\/li\u003e\n    \u003cli\u003e12 balanced line outputs, 3 monitor groups, up to 7.1.4 support\u003c\/li\u003e\n    \u003cli\u003e2 headphone outputs with independent level control, 130 mW, 116 dB DR\u003c\/li\u003e\n    \u003cli\u003e16-channel ADAT I\/O, S\/PDIF, Word Clock I\/O, MIDI I\/O\u003c\/li\u003e\n    \u003cli\u003eFull remote control via Focusrite Control 2 (desktop + iOS\/Android)\u003c\/li\u003e\n    \u003cli\u003eStandalone mode — operates without a host computer\u003c\/li\u003e\n    \u003cli\u003eIncludes Hitmaker Expansion (Brainworx bx_console Focusrite SC, Oxford Reverb, and more)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eInputs: 26 (8 mic\/line XLR-TRS combo, 2 front DI, 16 ADAT, 2 S\/PDIF, 2 MIDI)\u003c\/li\u003e\n    \u003cli\u003eOutputs: 28 (12 balanced line, 2 headphone, 16 ADAT, 2 S\/PDIF, 2 MIDI)\u003c\/li\u003e\n    \u003cli\u003eOutputs 1–2: simultaneous XLR and TRS, +24 dBu max output level\u003c\/li\u003e\n    \u003cli\u003eConversion: 24-bit \/ 192 kHz, up to 125 dB dynamic range (A-weighted), 0.00022% THD\u003c\/li\u003e\n    \u003cli\u003eGain: ISA channels up to 79 dB, Focusrite channels up to 69 dB\u003c\/li\u003e\n    \u003cli\u003eISA input impedance: switchable (multiple positions)\u003c\/li\u003e\n    \u003cli\u003eHeadphone output: up to 130 mW, 3 Ω output impedance, up to 116 dB DR\u003c\/li\u003e\n    \u003cli\u003eHost connectivity: USB-C\u003c\/li\u003e\n    \u003cli\u003eClock: Word Clock I\/O\u003c\/li\u003e\n    \u003cli\u003eForm factor: 2U rackmount\u003c\/li\u003e\n    \u003cli\u003eChassis: anodised aluminium\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":53654470000977,"sku":"59557","price":2230.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteISAC8X1.jpg?v=1777534235"},{"product_id":"focusrite-isa-828-mkii","title":"Focusrite ISA 828 mkII","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eFocusrite ISA 828 MkII\u003c\/strong\u003e — an eight-channel microphone preamp with a Lundahl LL1538 transformer on every input, built as a permanent rack fixture that every source can stay connected to at once.\u003c\/p\u003e\n\n\u003cp\u003eEach channel has separate mic and line connectors, with channels 1-4 adding a front-panel instrument input — every source stays plugged in simultaneously, with nothing to repatch between sessions. An efficient switching power supply keeps the unit cool under continuous use, and the optional ISA ADN8 card adds eight Dante, ADAT and AES3 outputs at up to 24-bit\/192 kHz and 122 dB of dynamic range.\u003c\/p\u003e\n\n\u003ch3\u003eEight input jacks, all permanently connected\u003c\/h3\u003e\n\u003cp\u003eDedicated mic and line connectors on every channel remove the need to swap a single combo jack between sources — a microphone, a line feed from a console, and an instrument can all stay wired in, with input selection just a front-panel button press. That makes ISA 828 MkII a fixture in the rack rather than a device to unplug and replug for every session, which matters especially for mobile rigs and studios with rotating clients.\u003c\/p\u003e\n\n\u003ch3\u003e80 dB of gain and switchable impedance for any microphone\u003c\/h3\u003e\n\u003cp\u003eFour input impedance settings — from 600 Ohms through the original ISA 110 value (1.4 kOhms), 2.4 kOhms, up to 6.8 kOhms — let you tailor tonal character to a specific microphone instead of settling for one compromise setting across every source. Stepped gain up to 60 dB plus a continuously variable +20 dB trim give 80 dB of headroom on the mic input and 30 dB on line, and a switchable insert on every channel lets you patch in a compressor or EQ ahead of conversion — including when the unit runs digitally with the ADN8 card, where the analogue outputs double as insert sends.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e8 preamps with a Lundahl LL1538 transformer on every input\u003c\/li\u003e\n\u003cli\u003eDedicated mic and line connectors on every channel, DI on channels 1-4\u003c\/li\u003e\n\u003cli\u003e4 input impedance settings, including the classic ISA 110 value\u003c\/li\u003e\n\u003cli\u003eGain up to 60 dB in 10 dB steps plus a continuously variable +20 dB trim (up to 80 dB on mic)\u003c\/li\u003e\n\u003cli\u003eHigh-pass filter, 75 Hz, 18 dB\/octave\u003c\/li\u003e\n\u003cli\u003e6-segment LED metering per channel, calibratable\u003c\/li\u003e\n\u003cli\u003eSwitchable rear-panel insert on every channel\u003c\/li\u003e\n\u003cli\u003eAnalogue output via 8x DB25\u003c\/li\u003e\n\u003cli\u003eSwitching power supply — quiet, cool continuous operation\u003c\/li\u003e\n\u003cli\u003eOptional ISA ADN8 card: Dante, ADAT, AES3 up to 24-bit\/192 kHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 8 independent microphone preamps\u003c\/li\u003e\n\u003cli\u003eInputs: 8x XLR (mic), 8x TRS (line), 4x TS (instrument, channels 1-4)\u003c\/li\u003e\n\u003cli\u003eMic gain: up to 60 dB in 10 dB steps + 0-20 dB trim\u003c\/li\u003e\n\u003cli\u003eInstrument gain: 10-40 dB (channels 1-4)\u003c\/li\u003e\n\u003cli\u003eInput impedance (mic): 600 Ohms \/ 1.4 kOhms (ISA 110) \/ 2.4 kOhms \/ 6.8 kOhms\u003c\/li\u003e\n\u003cli\u003eHPF: 75 Hz, 18 dB\/octave\u003c\/li\u003e\n\u003cli\u003eFrequency response: 10 Hz-122 kHz\u003c\/li\u003e\n\u003cli\u003eAnalogue outputs: 8x via DB25 connector\u003c\/li\u003e\n\u003cli\u003eOptional A-D conversion: 24-bit\/192 kHz, 122 dB dynamic range (ADN8 card)\u003c\/li\u003e\n\u003cli\u003eDimensions: 3.5 x 19 x 12.8 in (2U)\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":54246842564945,"sku":"47996","price":3429.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteISA828mkII1.jpg?v=1783947276"},{"product_id":"focusrite-isa-adn2-dante-a-d-card","title":"Focusrite ISA ADN2 Dante A\/D Card","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eFocusrite ISA ADN2\u003c\/strong\u003e — an optional two-channel A-D card for the ISA One preamp and DI, bringing the classic Lundahl transformer signal path onto Dante, plus AES3, ADAT and S\/PDIF.\u003c\/p\u003e\n\n\u003cp\u003eThe card fits into ISA One's expansion slot and operates up to 24-bit\/192 kHz, outputting four formats at once: two RJ45 Dante ports (primary\/secondary), an XLR connector for AES3, a TOSLINK port for ADAT, and an RCA jack for S\/PDIF. BNC Word Clock syncs the card to an external clock or the Dante network, and configuration and metering happen remotely — RedNet Control for settings, Dante Controller for routing.\u003c\/p\u003e\n\n\u003ch3\u003eBringing ISA One onto Dante without losing the analogue path\u003c\/h3\u003e\n\u003cp\u003eADN2 can be fitted at any point during ISA One's working life — no engineering experience needed, following the instructions included with the card — so the decision to invest in a Dante network doesn't have to happen at the moment of buying the preamp. Once installed, the ISA One preamp and DI become visible on the network alongside RedNet and Red interfaces, so the character of the Lundahl LL1538 transformer reaches any workstation connected to the same infrastructure, with no external converter sitting between the unit and the network.\u003c\/p\u003e\n\n\u003ch3\u003eFour output formats on one card\u003c\/h3\u003e\n\u003cp\u003eDante, AES3, ADAT and S\/PDIF all leave the card at the same time, so the same ISA One handles a Dante-based session in the morning and a direct AES3 connection to an older console in the afternoon, with no card swap or extra format converter. Redundant primary\/secondary Dante ports protect against signal interruption where stability matters, and Word Clock I\/O lets the card's timing match the rest of the studio system without manually retuning every device separately.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo-channel A-D card for the ISA One preamp and DI\u003c\/li\u003e\n\u003cli\u003eSimultaneous Dante, AES3 (XLR), ADAT (TOSLINK) and S\/PDIF (RCA) outputs\u003c\/li\u003e\n\u003cli\u003eOperation up to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003eRedundant primary\/secondary Dante ports\u003c\/li\u003e\n\u003cli\u003eWord Clock input and output on BNC\u003c\/li\u003e\n\u003cli\u003eFitted at any point in the unit's life, no engineering experience needed\u003c\/li\u003e\n\u003cli\u003eRemote control and metering through RedNet Control\u003c\/li\u003e\n\u003cli\u003eRouting configured in Dante Controller, no hardware patching\u003c\/li\u003e\n\u003cli\u003eFull interoperability with RedNet and Red interfaces\u003c\/li\u003e\n\u003cli\u003eIncludes the Brainworx bx_console Focusrite plug-in (ISA 110\/ISA 130 emulation)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 2-channel A-D conversion\u003c\/li\u003e\n\u003cli\u003eCompatibility: Focusrite ISA One (preamp and DI)\u003c\/li\u003e\n\u003cli\u003eSample rates: up to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003eDante: 2x RJ45 (primary\/secondary)\u003c\/li\u003e\n\u003cli\u003eAES3: 1x XLR output\u003c\/li\u003e\n\u003cli\u003eADAT: 1x TOSLINK\u003c\/li\u003e\n\u003cli\u003eS\/PDIF: 1x RCA\u003c\/li\u003e\n\u003cli\u003eWord Clock: BNC input and output\u003c\/li\u003e\n\u003cli\u003eSoftware: RedNet Control, Dante Controller\u003c\/li\u003e\n\u003cli\u003eFitting: retrofits to ISA One, no engineering experience required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":54246842794321,"sku":"53493","price":552.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteISAADN2.jpg?v=1783947265"},{"product_id":"focusrite-isa-adn8-dante-a-d-card","title":"Focusrite ISA ADN8 Dante A\/D Card","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eFocusrite ISA ADN8\u003c\/strong\u003e — an optional eight-channel A-D card for the ISA 428 MkII and ISA 828 MkII preamps, bringing the classic Focusrite signal path with its Lundahl transformer directly onto Dante, AES3 and ADAT at the same time.\u003c\/p\u003e\n\n\u003cp\u003eThe card operates at sample rates up to 24-bit\/192 kHz and outputs three formats simultaneously: two RJ45 Dante ports (primary\/secondary), a DB25 connector wired to the AES59 standard for AES3, and two TOSLINK ports for ADAT. BNC Word Clock I\/O syncs the unit to an external clock or the Dante network clock, and routing and configuration happen remotely, with no physical patchbay involved.\u003c\/p\u003e\n\n\u003ch3\u003eConsole-grade ISA preamps brought directly onto Dante\u003c\/h3\u003e\n\u003cp\u003eISA ADN8 turns an ISA 428 MkII or ISA 828 MkII into a fully-fledged Dante device, appearing on the network alongside RedNet and Red interfaces — with no external converter and none of the character lost from the Lundahl LL1538 transformer-based preamps. Eight preamp channels reach any room in the building connected to the same network, letting a studio keep its prized preamps in one place while any control room or stage can draw on them.\u003c\/p\u003e\n\n\u003ch3\u003eOutput flexibility: Dante, AES3 and ADAT at the same time\u003c\/h3\u003e\n\u003cp\u003eThe AES3 output on DB25 AES59 handles eight channels simultaneously, and two TOSLINK ADAT ports give eight channels at 96 kHz or four at 192 kHz — without giving up Dante at the same time if the console or interface on the other end doesn't speak audio-over-IP. Redundant Dante ports with automatic failover protect against signal interruption in critical installations, and remote control and metering through RedNet Control give full visibility into the card's status without walking over to the rack.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEight-channel A-D card for ISA 428 MkII and ISA 828 MkII\u003c\/li\u003e\n\u003cli\u003eSimultaneous Dante, AES3 (DB25 AES59) and ADAT (2x TOSLINK) outputs\u003c\/li\u003e\n\u003cli\u003eOperation up to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003eRedundant primary\/secondary Dante ports with automatic failover\u003c\/li\u003e\n\u003cli\u003eADAT: 8 channels at 96 kHz or 4 channels at 192 kHz\u003c\/li\u003e\n\u003cli\u003eWord Clock input and output on BNC\u003c\/li\u003e\n\u003cli\u003eRemote control and metering through RedNet Control\u003c\/li\u003e\n\u003cli\u003eRouting configured in Dante Controller, no hardware patching\u003c\/li\u003e\n\u003cli\u003eFull interoperability with RedNet and Red interfaces\u003c\/li\u003e\n\u003cli\u003eIncludes the Brainworx bx_console Focusrite plug-in (ISA 110\/ISA 130 emulation)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 8-channel A-D conversion\u003c\/li\u003e\n\u003cli\u003eCompatibility: ISA 428 MkII, ISA 828 MkII\u003c\/li\u003e\n\u003cli\u003eSample rates: up to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003eDante: 2x RJ45 (primary\/secondary), redundancy with auto-switchover\u003c\/li\u003e\n\u003cli\u003eAES3: 1x DB25 (AES59), 8 channels\u003c\/li\u003e\n\u003cli\u003eADAT: 2x TOSLINK, 8 channels @ 96 kHz or 4 channels @ 192 kHz\u003c\/li\u003e\n\u003cli\u003eWord Clock: BNC input and output\u003c\/li\u003e\n\u003cli\u003eSoftware: RedNet Control, Dante Controller\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":54246842958161,"sku":"53494","price":679.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteISAADN8DanteA_DCard1.jpg?v=1783947254"},{"product_id":"focusrite-isa-one-analogue","title":"Focusrite ISA One Analogue","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eFocusrite ISA One Analogue\u003c\/strong\u003e — a single-channel microphone preamp with a Lundahl LL1538 transformer and an independent DI channel, fully analogue with the option to fit a 192 kHz A-D card later.\u003c\/p\u003e\n\n\u003cp\u003eThe same circuit found in the original ISA 110 module, and carried through four decades of Focusrite designs, sits here in a portable, single-channel enclosure. The front-panel DI has its own low\/high impedance switching and a separate amplifier output independent of the mic signal path, and an insert on the balanced input lets you patch in an external processor before conversion.\u003c\/p\u003e\n\n\u003ch3\u003eA DI with its own amp output for guitar or bass\u003c\/h3\u003e\n\u003cp\u003eThe front-panel instrument channel has independent impedance switching and its own rear XLR output separate from the main mic path — a guitar or bass signal reaches the converter and, through the DI's amp output, a guitar amp for reamping, at the same time, with no splitter or extra cable needed. The insert on the balanced input, switched in from the front panel, lets you drop a compressor or EQ into the path before conversion, and metering — a calibrated VU meter plus two six-segment peak indicators — reads pre- or post-insert.\u003c\/p\u003e\n\n\u003ch3\u003eA flexible path to digital: the optional 192 kHz A-D card\u003c\/h3\u003e\n\u003cp\u003eISA One Analogue doesn't make you pay for digital conversion you don't need — the 192 kHz A-D card, with 118 dB of dynamic range, can be fitted at any time without engineering experience, using the exact same converter found in the ISA One Digital. Until then, ISA One Analogue stays a clean, portable analogue preamp feeding whatever external interface or converter you already have.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMicrophone preamp with Lundahl LL1538 transformer (ISA 110 circuit)\u003c\/li\u003e\n\u003cli\u003eFront-panel DI with independent impedance switching and its own amp output\u003c\/li\u003e\n\u003cli\u003eDedicated insert on the balanced input\u003c\/li\u003e\n\u003cli\u003eOptional stereo 192 kHz A-D card, 118 dB dynamic range\u003c\/li\u003e\n\u003cli\u003eBacklit VU meter with adjustable calibration\u003c\/li\u003e\n\u003cli\u003eTwo six-segment peak meters, pre\/post-insert metering\u003c\/li\u003e\n\u003cli\u003eRugged, portable, all-metal enclosure\u003c\/li\u003e\n\u003cli\u003eBackward compatible with the ISA ADN2 card (Dante, AES3, ADAT, S\/PDIF)\u003c\/li\u003e\n\u003cli\u003eISA One Digital version ships with the A-D card as standard\u003c\/li\u003e\n\u003cli\u003eIncludes the Brainworx bx_console Focusrite SC plug-in\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 1 transformer microphone preamp\u003c\/li\u003e\n\u003cli\u003eLine gain: -20 to +10 dB in 10 dB steps, plus 20 dB continuously variable\u003c\/li\u003e\n\u003cli\u003eInstrument gain: 10-40 dB, continuously variable\u003c\/li\u003e\n\u003cli\u003eTHD+N (line): 0.0001% at 0 dBu, 22 Hz-22 kHz filter\u003c\/li\u003e\n\u003cli\u003eFrequency response (line): -0.3 dB at 10 Hz, -3 dB at 200 kHz\u003c\/li\u003e\n\u003cli\u003eOptional A-D card: 24-bit, up to 192 kHz, 118 dB dynamic range\u003c\/li\u003e\n\u003cli\u003eMetering: calibrated VU, 2x six-segment peak LED\u003c\/li\u003e\n\u003cli\u003eInsert: balanced send\/return on TRS\u003c\/li\u003e\n\u003cli\u003ePower consumption: 35 W\u003c\/li\u003e\n\u003cli\u003eChassis: portable, all-metal, flightcase included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":54246843875665,"sku":"1047","price":517.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteISAOneAnalogue1.jpg?v=1783947245"},{"product_id":"focusrite-isa-two","title":"Focusrite ISA Two","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eFocusrite ISA Two\u003c\/strong\u003e — a two-channel microphone preamp built around the Lundahl LL1538 transformer and a circuit derived directly from the original ISA 110 module, designed as a purely analogue source feeding any external converter or interface.\u003c\/p\u003e\n\n\u003cp\u003eEach of the two independent channels offers mic, line and front-panel DI inputs, switchable input impedance, a balanced insert point, and a variable high-pass filter with a cutoff sweepable from 16 to 420 Hz. Unlike the ISA One, ISA Two has no slot for a digital card — the output is analogue only, meant to feed an external A-D converter, interface or console.\u003c\/p\u003e\n\n\u003ch3\u003eMatching input impedance to any microphone, vintage included\u003c\/h3\u003e\n\u003cp\u003eFour selectable input impedance values, including the original ISA 110 setting, let you tailor tonal character to a specific microphone rather than settling for one compromise setting — a lower impedance gives a more transparent, modern result, while a higher one restores the warmth typical of vintage tube or ribbon mics from the 60s and 70s. The setting is remembered after power-down, so a configuration dialled in for a particular mic doesn't get lost between sessions.\u003c\/p\u003e\n\n\u003ch3\u003e80 dB of gain headroom and an insert without leaving the analogue path\u003c\/h3\u003e\n\u003cp\u003eStepped gain from 0 to 60 dB in 10 dB increments, plus a continuously variable trim up to +20 dB, gives up to 80 dB of gain in total — enough headroom for quiet acoustic sources without pushing the noise floor higher than needed. A balanced insert on each channel, switched in from the front panel, lets you patch in an outboard EQ or compressor directly within the preamp's signal path, and 8-segment LED metering with a rear-panel calibration control keeps the signal aligned with whatever converter or DAW is on the receiving end.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 independent microphone preamps with Lundahl LL1538 transformer\u003c\/li\u003e\n\u003cli\u003e4 switchable input impedances, remembered after power-down\u003c\/li\u003e\n\u003cli\u003eMic gain 0-60 dB in 10 dB steps plus up to +20 dB trim (up to 80 dB total)\u003c\/li\u003e\n\u003cli\u003eRear-panel line input and front-panel DI\u003c\/li\u003e\n\u003cli\u003eVariable high-pass filter, 16-420 Hz\u003c\/li\u003e\n\u003cli\u003ePolarity inversion on each channel\u003c\/li\u003e\n\u003cli\u003eBalanced send\/return insert, switched in from the front panel\u003c\/li\u003e\n\u003cli\u003e8-segment LED metering with calibrated reference level\u003c\/li\u003e\n\u003cli\u003eAnalogue output only — no digital card slot\u003c\/li\u003e\n\u003cli\u003eRugged, all-metal enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 2 independent microphone preamps\u003c\/li\u003e\n\u003cli\u003eMic gain: 0-60 dB in 10 dB steps plus 0-20 dB trim\u003c\/li\u003e\n\u003cli\u003eEIN: -127 dBu at 60 dB gain (150 Ohm source, 22 Hz-22 kHz filter)\u003c\/li\u003e\n\u003cli\u003eLine gain: -20 to +10 dB in 10 dB steps plus trim\u003c\/li\u003e\n\u003cli\u003eInstrument gain: 10-40 dB, continuously variable\u003c\/li\u003e\n\u003cli\u003eInput impedance: 4 switchable values, including original ISA 110 setting\u003c\/li\u003e\n\u003cli\u003eHPF: 16-420 Hz, variable\u003c\/li\u003e\n\u003cli\u003eTHD+N (line): 0.0001% at 0 dBu\u003c\/li\u003e\n\u003cli\u003eInsert: balanced send\/return on TRS jack per channel\u003c\/li\u003e\n\u003cli\u003eMetering: 8-segment LED, calibrated reference level\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":54246844039505,"sku":"1048","price":846.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteISATwo1.jpg?v=1783947231"},{"product_id":"focusrite-rednet-a8r","title":"Focusrite RedNet A8R","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eFocusrite RedNet A8R\u003c\/strong\u003e — a 1U, 8x8 analogue line-level interface for Dante networks with an additional AES3 pair on XLR, designed as a bridge between consoles, analogue outboard and an audio-over-IP system in critical-path installations.\u003c\/p\u003e\n\n\u003cp\u003eTwo DB25 connectors wired to the AES59 standard carry eight line-level channels, while an XLR pair adds two AES\/EBU channels with sample rate conversion on the input, so external digital gear doesn't need to be synced to the Dante network to work immediately. 24-bit conversion up to 192 kHz with up to 119 dB of dynamic range stays transparent whether A8R is running in a studio, on a dub stage or in a broadcast installation.\u003c\/p\u003e\n\n\u003ch3\u003eAn 8x8 analogue bridge with no compromise in signal quality\u003c\/h3\u003e\n\u003cp\u003eInput and output levels are configured remotely to +18 or +24 dBFS, and signals stay balanced throughout the internal signal path, so matching an analogue console or power amplifier needs no extra pads or trim pots. The AES3\/DARS input on XLR lets A8R sync to a house reference signal or accept a digital source directly, with no separate format converter needed.\u003c\/p\u003e\n\n\u003ch3\u003ePower and network redundancy for critical installations\u003c\/h3\u003e\n\u003cp\u003eTwo independent, universal 100-240V power supplies with locking IEC inlets, plus dual etherCON ports running in redundant or switched (daisy-chain) mode, remove the single point of failure in systems where a signal dropout isn't an option — broadcast installs and fixed live systems, for example. BNC Word Clock with switchable 75 Ohm termination lets A8R sync to an external clock or act as grand master for the whole Dante network.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e8x8 analogue line-level channels for Dante networks\u003c\/li\u003e\n\u003cli\u003eAdditional 2 AES\/EBU channels on XLR with input sample rate conversion\u003c\/li\u003e\n\u003cli\u003e24-bit conversion up to 192 kHz, dynamic range up to 119 dB\u003c\/li\u003e\n\u003cli\u003eRemotely switchable +18 or +24 dBFS reference levels\u003c\/li\u003e\n\u003cli\u003eDARS\/AES3 input on XLR as an alternate clock source\u003c\/li\u003e\n\u003cli\u003eWord Clock input and output on BNC with switchable termination\u003c\/li\u003e\n\u003cli\u003eTwo independent universal 100-240V power supplies with locking IEC inlets\u003c\/li\u003e\n\u003cli\u003eDual etherCON ports, redundant and switched (daisy-chain) modes\u003c\/li\u003e\n\u003cli\u003eRemote configuration through RedNet Control\u003c\/li\u003e\n\u003cli\u003eIncludes the Brainworx bx_console Focusrite SC plug-in\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnalogue channels: 8 in\/8 out on 2x DB25 AES59\u003c\/li\u003e\n\u003cli\u003eAdditional I\/O: 2-channel AES\/EBU on XLR (input with DARS option)\u003c\/li\u003e\n\u003cli\u003eSample rates: 44.1\/48\/88.2\/96\/176.4\/192 kHz, 24-bit\u003c\/li\u003e\n\u003cli\u003eDynamic range: up to 119 dB\u003c\/li\u003e\n\u003cli\u003eReference levels: 0 dBFS = +18 or +24 dBu (switchable)\u003c\/li\u003e\n\u003cli\u003eWord Clock: BNC 75 Ohms, switchable termination\u003c\/li\u003e\n\u003cli\u003eClock sources: internal or Dante Network Master\u003c\/li\u003e\n\u003cli\u003eNetwork: Dante, 2x etherCON, redundant\/switched\u003c\/li\u003e\n\u003cli\u003ePower: 2x universal 100-240V supply, 24W draw\u003c\/li\u003e\n\u003cli\u003eChassis: 1U, all-metal, roadworthy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":54246847414609,"sku":"40364","price":3032.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteRedNetA8R1.jpg?v=1783947220"},{"product_id":"focusrite-rednet-am2","title":"Focusrite RedNet AM2","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eFocusrite RedNet AM2\u003c\/strong\u003e — a compact stereo monitoring unit for Dante networks, combining a headphone amplifier and balanced XLR line outputs wherever an extra listening point is needed.\u003c\/p\u003e\n\n\u003cp\u003eA 2-channel Dante receiver on the Audinate Ultimo chipset and precise D\/A conversion at 44.1-96 kHz deliver over 118 dB of dynamic range on both the line and headphone outputs. A single Ethernet cable with PoE power, or the included DC supply, carries power, audio, clock and remote control, and a built-in Gigabit switch across the two etherCON connectors lets you daisy-chain another Dante device without a separate hub.\u003c\/p\u003e\n\n\u003ch3\u003eHeadphone and line monitoring wherever the interface can't reach\u003c\/h3\u003e\n\u003cp\u003eThe headphone amp drives loads up to 600 Ohms at substantial output levels, so AM2 works as well next to a drum kit on stage or at a backline monitoring point as it does in a control room — adding one Ethernet cable instead of running another headphone cable across the building. XLR line outputs up to 24 dBu, with a switchable 0 dBFS reference level of +18 or +24 dBu, drive any monitor or power amplifier, and the threaded bush in the base lets the unit mount directly on a mic stand.\u003c\/p\u003e\n\n\u003ch3\u003eQuick level control and a safe way to kill the signal\u003c\/h3\u003e\n\u003cp\u003eTwo large knobs adjust headphone and line output levels independently, and an illuminated mute button instantly kills the signal feeding an external power amp or monitors without reaching for Dante Controller. The signal indicator shows red at 0 dBFS, orange at -6 dBFS and green at -42 dBFS on each channel, giving a quick level check without connecting a laptop to the network.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStereo monitoring for Dante networks: headphone and line outputs\u003c\/li\u003e\n\u003cli\u003eHeadphone amplifier driving loads up to 600 Ohms\u003c\/li\u003e\n\u003cli\u003eXLR line outputs up to 24 dBu, switchable +18\/+24 dBu reference level\u003c\/li\u003e\n\u003cli\u003eD\/A conversion at 44.1-96 kHz, over 118 dB dynamic range\u003c\/li\u003e\n\u003cli\u003eIndependent level knobs for headphone and line output\u003c\/li\u003e\n\u003cli\u003eIlluminated mute button on the line output\u003c\/li\u003e\n\u003cli\u003eSignal, network and power status indicators\u003c\/li\u003e\n\u003cli\u003ePoE (IEEE 802.3af) power or included DC supply\u003c\/li\u003e\n\u003cli\u003eTwo etherCON connectors with built-in Gigabit switch\u003c\/li\u003e\n\u003cli\u003eThreaded mic stand mount in the base\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 2 (Audinate Ultimo Dante receiver)\u003c\/li\u003e\n\u003cli\u003eD\/A conversion: 44.1-96 kHz, over 118 dB dynamic range\u003c\/li\u003e\n\u003cli\u003eHeadphone output: up to 600 Ohms, high output level\u003c\/li\u003e\n\u003cli\u003eLine output: XLR, up to 24 dBu, switchable +18\/+24 dBu reference level\u003c\/li\u003e\n\u003cli\u003eClock sources: internal or Dante Network Master\u003c\/li\u003e\n\u003cli\u003ePower: PoE IEEE 802.3af or included DC supply\u003c\/li\u003e\n\u003cli\u003eNetwork: Dante, 2x etherCON with built-in Gigabit switch\u003c\/li\u003e\n\u003cli\u003eChassis: aluminium\/steel, non-slip feet, mic stand thread\u003c\/li\u003e\n\u003cli\u003eDimensions: approx. 58 mm height, 116 mm depth\u003c\/li\u003e\n\u003cli\u003eSoftware: RedNet Control, Dante Controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":54246847480145,"sku":"40352","price":682.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteRedNetAM21.jpg?v=1783947211"},{"product_id":"focusrite-rednet-hd32r","title":"Focusrite RedNet HD32R","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eFocusrite RedNet HD32R\u003c\/strong\u003e — a 1U interface bridging Pro Tools|HD and HDX systems to a Dante network through Mini DigiLink connectors, delivering full 32x32 channel I\/O without changing existing Pro Tools workflow.\u003c\/p\u003e\n\n\u003cp\u003eHD32R behaves like a standard 64-channel (32 in\/32 out) break in\/out box, appearing in Pro Tools exactly as any other supported interface — Dante sources and destinations are assigned to Pro Tools inputs and outputs with no new way of working to learn. Supported systems include Pro Tools|HDX, HD Native, HD Native Thunderbolt and legacy HD TDM, and up to six HD32R modules can be connected to a single HDX system to reach its maximum channel count.\u003c\/p\u003e\n\n\u003ch3\u003eFull 32-channel Pro Tools|HD I\/O without giving up Dante\u003c\/h3\u003e\n\u003cp\u003eEach HD32R connected directly to a Mini DigiLink port on an HDX or HD card provides a full 32 inputs and outputs, bringing the entire Dante ecosystem — from RedNet to third-party analogue and digital interfaces — onto Pro Tools without swapping a computer card and without sacrificing the low latency of Pro Tools|HD cards. Where a free DigiLink port isn't available, Expansion Mode lets you connect an existing 16-channel Pro Tools|HD interface to the HD32R's expansion port, combining for a full 32 channels on a single card port.\u003c\/p\u003e\n\n\u003ch3\u003eCritical redundancy and integration with existing HD gear\u003c\/h3\u003e\n\u003cp\u003eTwo independent power supplies with fault detection and locking IEC inlets, plus dual etherCON ports running in redundant, switched or daisy-chain mode, protect the session against signal interruption in critical-path production. Word Clock and Loop Sync on BNC connectors integrate HD32R with existing HD I\/O or Sync HD I\/O interfaces without an extra clock converter, and remote control and metering through RedNet Control give full visibility into the unit's status without walking over to the rack.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e32x32 channels of I\/O for Pro Tools|HD via Mini DigiLink (16x16 at 192 kHz)\u003c\/li\u003e\n\u003cli\u003eSupport for Pro Tools|HDX, HD Native, HD Native Thunderbolt and HD TDM\u003c\/li\u003e\n\u003cli\u003eUp to six HD32R modules on a single HDX system\u003c\/li\u003e\n\u003cli\u003eExpansion Mode to combine with an existing 16-channel HD interface\u003c\/li\u003e\n\u003cli\u003eTwo independent power supplies with fault detection and locking IEC inlets\u003c\/li\u003e\n\u003cli\u003eDual etherCON ports, redundant, switched and daisy-chain modes\u003c\/li\u003e\n\u003cli\u003eWord Clock and Loop Sync I\/O on BNC\u003c\/li\u003e\n\u003cli\u003eRemote control and metering through RedNet Control\u003c\/li\u003e\n\u003cli\u003eOperation up to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003eIncludes the Brainworx bx_console Focusrite SC plug-in\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 32x32 up to 96 kHz, 16x16 at 176.4\/192 kHz\u003c\/li\u003e\n\u003cli\u003ePro Tools connectivity: 2x Mini DigiLink, expansion port\u003c\/li\u003e\n\u003cli\u003eSample rates: 44.1-192 kHz, 24-bit\u003c\/li\u003e\n\u003cli\u003eClock sources: internal, Word Clock, Loop Sync, Dante Network Master\u003c\/li\u003e\n\u003cli\u003eExternal Word Clock: ±7.5% of nominal range\u003c\/li\u003e\n\u003cli\u003eNetwork: Dante, dual etherCON ports, redundant\/switched\/daisy-chain\u003c\/li\u003e\n\u003cli\u003ePower: 2x internal supply with locking IEC inlet\u003c\/li\u003e\n\u003cli\u003eChassis: 1U, 19-inch, roadworthy\u003c\/li\u003e\n\u003cli\u003eSoftware: RedNet Control\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":54246847545681,"sku":"40366","price":2371.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteRedNetHD32R1.jpg?v=1783947200"},{"product_id":"focusrite-rednet-x2p","title":"Focusrite RedNet X2P","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eFocusrite RedNet X2P\u003c\/strong\u003e — a compact 2x2 Dante interface with two Red Evolution mic preamps, a stereo line output and a headphone amplifier, designed to mount directly on a mic stand wherever extra channels are needed.\u003c\/p\u003e\n\n\u003cp\u003ePower, audio, clock and remote control all run over a single Ethernet cable — just a PoE-capable switch or injector, with no separate power run needed at the vocalist's or presenter's position. Two combo XLR\/jack inputs accept mic, line or instrument level signals, conversion up to 24-bit\/96 kHz with over 118 dB of dynamic range keeps signal quality in line with the rest of the Red family, and a built-in network switch lets you daisy-chain another Dante device without an extra hub.\u003c\/p\u003e\n\n\u003ch3\u003eAn extra channel where a standard interface can't reach\u003c\/h3\u003e\n\u003cp\u003eA single Ethernet cable carrying PoE power, audio and control makes X2P a practical remote input point on stage, in a conference room, or out in the field — no multicore, no separate power supply at the microphone. Red Evolution preamp gain adjusts in 1 dB steps across a 0-68 dB range, and Air mode recreates the character of transformer-based ISA preamps, adding a 2 dB lift around 10 kHz and a 2 dB dip at 20 Hz relative to 1 kHz, with input impedance dropping to 2.2 kOhms.\u003c\/p\u003e\n\n\u003ch3\u003eSafe foldback for the artist, no risk of touching the gain\u003c\/h3\u003e\n\u003cp\u003eA built-in \"more me\" crossfader lets a performer balance their own local signal against the network mix in the headphones or line output, without pulling an engineer in for every request to hear the click louder. Local control lockout — separately for preamps and outputs — lets you leave X2P with the artist knowing they can't accidentally bump the mic gain, while the engineer keeps full remote control from RedNet Control.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x2 interface for Dante networks, mic-stand mountable\u003c\/li\u003e\n\u003cli\u003e2 Red Evolution preamps with Air mode, 0-68 dB gain in 1 dB steps\u003c\/li\u003e\n\u003cli\u003e2 combo XLR\/jack inputs: mic, line or instrument\u003c\/li\u003e\n\u003cli\u003eStereo XLR line output up to 24 dBu, headphone amp for low and high impedance\u003c\/li\u003e\n\u003cli\u003ePower, audio and control over a single Ethernet cable (PoE or DC supply)\u003c\/li\u003e\n\u003cli\u003eBuilt-in network switch for daisy-chaining additional Dante devices\u003c\/li\u003e\n\u003cli\u003e\"More me\" crossfader for local foldback mixing\u003c\/li\u003e\n\u003cli\u003eLocal lockout for preamp and output control\u003c\/li\u003e\n\u003cli\u003eLCD display for network status, power, gain and metering\u003c\/li\u003e\n\u003cli\u003eIncludes the Brainworx bx_console Focusrite plug-in (ISA 110\/ISA 130 emulation)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 2 inputs\/2 outputs (Dante)\u003c\/li\u003e\n\u003cli\u003ePreamps: 2x Red Evolution, 0-68 dB gain, phantom power, 80 Hz HPF, phase reverse\u003c\/li\u003e\n\u003cli\u003eConversion: up to 24-bit\/96 kHz, over 118 dB dynamic range\u003c\/li\u003e\n\u003cli\u003eLine output: XLR, up to 24 dBu, 120 dB dynamic range (A-weighted)\u003c\/li\u003e\n\u003cli\u003eHeadphone output: 117 dB dynamic range, 32-600 Ohm headphone impedance\u003c\/li\u003e\n\u003cli\u003ePower: PoE IEEE 802.3af class 0 or 12V 1.2A DC supply\u003c\/li\u003e\n\u003cli\u003eNetwork: Dante, 2x etherCON with built-in switch\u003c\/li\u003e\n\u003cli\u003eClock sources: internal or Dante Network Master\u003c\/li\u003e\n\u003cli\u003eChassis: aluminium and steel, mic stand mount, Kensington lock slot\u003c\/li\u003e\n\u003cli\u003eSoftware: RedNet Control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":54246847578449,"sku":"40354","price":1292.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteRedNetX2P1.jpg?v=1783947192"},{"product_id":"focusrite-red-16line","title":"Focusrite Red 16Line","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eFocusrite Red 16Line\u003c\/strong\u003e — a 64-input\/64-output interface combining Pro Tools|HD, dual Thunderbolt 3 ports and a dual-port 32x32 Dante card in one rack unit, with two Red Evolution preamps and an extensive line-level I\/O complement.\u003c\/p\u003e\n\n\u003cp\u003e16 line inputs on D-sub connectors, 16 line outputs and two main monitor outputs give real channel count for working with an analogue console or patchbay, while A-D\/D-A conversion with over 118 dB (A-D) and 121 dB (D-A) dynamic range holds signal quality at mastering-grade levels. Three LCD displays provide precise metering for any input or output block.\u003c\/p\u003e\n\n\u003ch3\u003eSwitching between Pro Tools|HD and a second DAW without swapping cards\u003c\/h3\u003e\n\u003cp\u003eRed 16Line carries both DigiLink connectors and Thunderbolt 3 ports at the same time, so moving from Pro Tools|HD to a second DAW is a host mode change in RedNet Control or directly on the front panel — no pulling option cards, no interruption longer than a few seconds. Ultra-low round-trip latency makes it possible to build one mix on the DAW for both input-monitored overdubbing and plug-in playback, removing the need to run two separate mixes for the same session.\u003c\/p\u003e\n\n\u003ch3\u003e32x32 Dante for studio expansion without extra cabling\u003c\/h3\u003e\n\u003cp\u003eThe dual-port Dante card provides 32 input and 32 output channels at higher sample rates, so an additional room, workstation or RedNet device connects with a standard Ethernet cable instead of running analogue multicore through the building. The Red Evolution preamps deliver 63 dB of gain with stereo linking, individual phantom power, a high-pass filter and Air mode — a 2 dB boost at 10 kHz and a 2 dB dip at 20 Hz relative to 1 kHz, with input impedance dropping to 2.2 kOhms, recreating the character of a transformer-based ISA preamp on vocal or guitar sources.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e64 inputs\/64 outputs total\u003c\/li\u003e\n\u003cli\u003e16 line inputs and 16 line outputs on D-sub, 2 monitor outputs\u003c\/li\u003e\n\u003cli\u003e2 Red Evolution preamps with Air mode, 63 dB gain\u003c\/li\u003e\n\u003cli\u003eDual-port Dante card, 32x32 channels at higher sample rates\u003c\/li\u003e\n\u003cli\u003eDual Thunderbolt 3 ports, dual DigiLink connectors for Pro Tools|HD\u003c\/li\u003e\n\u003cli\u003eHost switching without reconfiguring option cards\u003c\/li\u003e\n\u003cli\u003eConversion with over 118 dB (A-D) and 121 dB (D-A) dynamic range\u003c\/li\u003e\n\u003cli\u003eADAT with SMUX I\/II support, S\/PDIF 2 in\/2 out (RCA and TOSLINK)\u003c\/li\u003e\n\u003cli\u003eThree LCD displays with precise metering\u003c\/li\u003e\n\u003cli\u003eIncludes RedNet Control, Focusrite Control, bx_console Focusrite SC, Red 2\/3\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 64 inputs\/64 outputs total\u003c\/li\u003e\n\u003cli\u003ePreamps: 2x Red Evolution, 63 dB gain, phantom power, HPF, phase reverse\u003c\/li\u003e\n\u003cli\u003eLine inputs: 20 Hz-35 kHz ±0.2 dB, THD+N -102 dB, SNR 119 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003e0 dBFS reference level: +18 or +24 dBu, switchable\u003c\/li\u003e\n\u003cli\u003eComputer connectivity: 2x Thunderbolt 3, 2x DigiLink (Pro Tools|HD)\u003c\/li\u003e\n\u003cli\u003eNetwork: dual-port Dante card, 32x32 channels\u003c\/li\u003e\n\u003cli\u003eDigital I\/O: ADAT (SMUX I\/II), S\/PDIF 2 in\/2 out (RCA, TOSLINK up to 96 kHz)\u003c\/li\u003e\n\u003cli\u003eClock sources: internal, ADAT 1\/2, S\/PDIF, Word Clock, Loop Sync, Dante Network Master\u003c\/li\u003e\n\u003cli\u003eDisplays: 3x LCD\u003c\/li\u003e\n\u003cli\u003eSoftware: RedNet Control, Focusrite Control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":54246847611217,"sku":"53495","price":3854.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteRed16Line1.jpg?v=1783947175"},{"product_id":"focusrite-red-8line","title":"Focusrite Red 8Line","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eFocusrite Red 8Line\u003c\/strong\u003e — a 58-input\/64-output Thunderbolt 3 interface with two Red Evolution mic preamps, eight balanced line I\/O on DB25 and built-in Dante networking, built as an audio hub for studios running several formats at once.\u003c\/p\u003e\n\n\u003cp\u003eBeyond Thunderbolt 3 and dual mini-DigiLink for Pro Tools|HD, Red 8Line offers 32 channels of Dante on the Brooklyn II chipset with 0.25 ms network latency, 16-channel ADAT (at 48 kHz) and stereo S\/PDIF. 24-bit\/192 kHz conversion using a parallel path summing architecture delivers 119 dB of dynamic range on the A-D side and 121 dB on the D-A side, so signal quality stays consistent no matter which input the signal arrives through.\u003c\/p\u003e\n\n\u003ch3\u003eOne hub, five buses, no repatching\u003c\/h3\u003e\n\u003cp\u003eTwo Thunderbolt 3 ports with Focusrite's session-proven drivers let you daisy-chain plug-in accelerators, hard drives or a 4K display, and switching between Pro Tools|HD and a Thunderbolt-connected DAW happens without reconfiguring audio settings. On top of that, the 32-channel Dante network can be expanded with RedNet gear or third-party devices such as Neve, Yamaha or DiGiCo, while ADAT and S\/PDIF cover older digital equipment without extra external converters.\u003c\/p\u003e\n\n\u003ch3\u003eMulti-channel monitoring and instant instrument access\u003c\/h3\u003e\n\u003cp\u003eBuilt-in monitor control handles mono, stereo and multi-channel configurations up to 7.1.2, and pairing with the RedNet R1 controller adds ready-made presets for immersive setups including Dolby Atmos. Three LCD displays show precise metering for any input or output block plus the monitor and headphone outputs, two independent high-current headphone outputs drive high-impedance headphones, and two front-panel instrument inputs stay accessible even with the unit rack-mounted.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e58 inputs\/64 outputs, including 2 Red Evolution preamps with Air mode\u003c\/li\u003e\n\u003cli\u003e8 line inputs and 10 line outputs on DB25, independent L\/R monitor outs\u003c\/li\u003e\n\u003cli\u003e32 channels of Dante (Brooklyn II chipset, 0.25 ms network latency)\u003c\/li\u003e\n\u003cli\u003e16-channel ADAT (48 kHz) and stereo S\/PDIF\u003c\/li\u003e\n\u003cli\u003e24-bit\/192 kHz conversion, 119 dB (A-D) \/ 121 dB (D-A) dynamic range\u003c\/li\u003e\n\u003cli\u003eDual Thunderbolt 3 ports, dual mini-DigiLink for Pro Tools|HD\u003c\/li\u003e\n\u003cli\u003eMonitor control up to 7.1.2, compatible with RedNet R1 and Atmos presets\u003c\/li\u003e\n\u003cli\u003eThree LCD displays with precise metering\u003c\/li\u003e\n\u003cli\u003eTwo independent headphone outputs, two front-panel instrument inputs\u003c\/li\u003e\n\u003cli\u003eIncludes RedNet Control 2, bx_console Focusrite SC, and Red 2\/3 plug-ins\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 58 inputs\/64 outputs total\u003c\/li\u003e\n\u003cli\u003ePreamps: 2x Red Evolution, 63 dB gain, phantom power, HPF, phase reverse\u003c\/li\u003e\n\u003cli\u003eLine I\/O: 8 inputs, 10 outputs on DB25\u003c\/li\u003e\n\u003cli\u003eConversion: 24-bit\/192 kHz, 119 dB (A-D) \/ 121 dB (D-A)\u003c\/li\u003e\n\u003cli\u003eComputer connectivity: 2x Thunderbolt 3, 2x mini-DigiLink (Pro Tools|HD)\u003c\/li\u003e\n\u003cli\u003eNetwork: Dante, Brooklyn II chipset, 32 channels, 0.25 ms latency\u003c\/li\u003e\n\u003cli\u003eDigital I\/O: 16-channel ADAT (48 kHz), stereo S\/PDIF\u003c\/li\u003e\n\u003cli\u003eMonitoring: up to 7.1.2, RedNet R1 compatible\u003c\/li\u003e\n\u003cli\u003eDisplays: 3x LCD, two headphone outputs\u003c\/li\u003e\n\u003cli\u003eSoftware: RedNet Control 2, Focusrite Control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":54246847676753,"sku":"53496","price":2891.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteRed8Line1.jpg?v=1783947165"},{"product_id":"focusrite-red-8pre","title":"Focusrite RED 8Pre","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eFocusrite Red 8Pre\u003c\/strong\u003e — a 64-in\/64-out audio interface combining eight Red Evolution preamps, dual Thunderbolt 2, direct Pro Tools|HD connectivity and built-in Dante networking in one rack unit.\u003c\/p\u003e\n\n\u003cp\u003e16 analogue inputs and 18 analogue outputs, two ADAT ports for a further 16 channels, and up to 32 additional inputs\/outputs over Dante give real scalability without swapping the interface — just add a RedNet or any other Dante device wherever there's an Ethernet jack. 24-bit\/192 kHz conversion using a parallel path summing architecture holds 118 dB of dynamic range on the A-D side and 121 dB on the D-A side, with THD+N under 0.0009% and a flat response from 20 Hz to 35 kHz (±0.25 dB).\u003c\/p\u003e\n\n\u003ch3\u003eOne box, three buses: Thunderbolt, Pro Tools|HD and Dante\u003c\/h3\u003e\n\u003cp\u003eTwo Thunderbolt 2 ports deliver round-trip latency as low as 1.67 ms and let you daisy-chain drives or a display without taking up a second port on the computer, dual DigiLink connectors plug Red 8Pre straight into a Pro Tools|HD rig or Avid interface, and Host Mode in Focusrite Control switches the unit between Pro Tools|HD and a Thunderbolt-connected DAW without repatching. The result: one interface handles a Pro Tools HDX session in the morning and a quick Ableton or Logic setup in the afternoon, while Dante adds channels exactly where standard analogue cabling wouldn't reach.\u003c\/p\u003e\n\n\u003ch3\u003eRed Evolution preamps with Air mode for vocals and guitars\u003c\/h3\u003e\n\u003cp\u003eEight digitally-controlled Red Evolution preamps deliver 63 dB of gain at -129 dBu EIN, keeping the noise floor well below quiet acoustic sources even at high gain settings. Air mode recreates the character of transformer-based preamps from the ISA range — it shifts input impedance to 2.1 kOhms and adds a subtle high-mid lift in the analogue path, ahead of A\/D conversion, giving vocals and acoustic guitar more presence without reaching for EQ in the DAW. High-headroom instrument inputs on the front panel stay accessible even when the unit is rack-mounted.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e64 inputs\/64 outputs, including 16 analogue inputs and 18 analogue outputs\u003c\/li\u003e\n\u003cli\u003e8 Red Evolution preamps with Air mode\u003c\/li\u003e\n\u003cli\u003e24-bit\/192 kHz conversion, parallel path summing, up to 121 dB dynamic range\u003c\/li\u003e\n\u003cli\u003eDual Thunderbolt 2 ports, 1.67 ms round-trip latency\u003c\/li\u003e\n\u003cli\u003eDual DigiLink connectors for Pro Tools|HD and Avid interfaces\u003c\/li\u003e\n\u003cli\u003eBuilt-in Dante networking, up to 32 additional channels over Ethernet\u003c\/li\u003e\n\u003cli\u003eTwo ADAT ports for a further 16 channels\u003c\/li\u003e\n\u003cli\u003eHost Mode to switch between Pro Tools|HD and a Thunderbolt DAW\u003c\/li\u003e\n\u003cli\u003eColour LCD displays and front-panel instrument inputs\u003c\/li\u003e\n\u003cli\u003eIncludes Focusrite Control, the Red plug-in suite, and the Softube Time and Tone bundle\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eChannels: 64 inputs\/64 outputs total\u003c\/li\u003e\n\u003cli\u003eAnalogue I\/O: 16 inputs, 18 outputs\u003c\/li\u003e\n\u003cli\u003ePreamps: 8x Red Evolution, 63 dB gain, -129 dBu EIN\u003c\/li\u003e\n\u003cli\u003eConversion: 24-bit\/192 kHz, 118 dB (A-D) \/ 121 dB (D-A)\u003c\/li\u003e\n\u003cli\u003eTHD+N: below 0.0009%\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 Hz-35 kHz ±0.25 dB\u003c\/li\u003e\n\u003cli\u003eComputer connectivity: 2x Thunderbolt 2, 2x DigiLink (Pro Tools|HD)\u003c\/li\u003e\n\u003cli\u003eNetwork: Dante, 2x RJ45 (Cat 5e or above), up to 32 channels\u003c\/li\u003e\n\u003cli\u003eExpansion: 2x ADAT (16 channels)\u003c\/li\u003e\n\u003cli\u003eSoftware: Focusrite Control, RedNet Control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":54246847709521,"sku":"53497","price":3972.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteRED8Pre1.jpg?v=1783947154"},{"product_id":"focusrite-rednet-a16r-mkii","title":"Focusrite RedNet A16R mkII","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eFocusrite RedNet A16R MkII\u003c\/strong\u003e — a 16-channel analogue interface for Dante networks with an additional AES3 pair, bridging consoles and analogue gear into an audio-over-IP system with full level control from the network side.\u003c\/p\u003e\n\n\u003cp\u003eAnalogue inputs and outputs run through four DB25 connectors wired to the AES59 standard, while an additional XLR pair adds flexibility as an alternate AES3 or DARS input\/output. Precision A-D and D-A conversion delivers 119 dB of dynamic range with a flat 20 Hz-20 kHz response (±0.15 dB), holding signal quality steady no matter how many times the unit gets installed and struck over its working life.\u003c\/p\u003e\n\n\u003ch3\u003eLevel calibration without touching the analogue gear\u003c\/h3\u003e\n\u003cp\u003eEvery input and output channel has independent level control available in RedNet Control, so matching gain to a console or amplifier happens remotely from a single point on the network — no trim pots, no physical access to the unit, and no risk of settings drifting between installs. BNC Word Clock lets A16R MkII sync to an external clock or act as grand master for the whole network.\u003c\/p\u003e\n\n\u003ch3\u003eRedundancy and compliance built for fixed installs\u003c\/h3\u003e\n\u003cp\u003eTwo independent power supplies with locking IEC inlets and automatic failover, plus dual primary\/secondary etherCON ports, protect against signal interruption in critical-path installations. AES67 and AES70 compliance, along with SMPTE ST 2110 support via Dante Domain Manager, mean A16R MkII drops into multi-vendor environments without extra conversion gateways, and connectors rated for repeated strike-and-setup hold up to the install cycle typical of touring and fixed systems alike.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e16-channel analogue interface for Dante with an additional AES3 pair\u003c\/li\u003e\n\u003cli\u003eA-D\/D-A conversion: 119 dB dynamic range, 20 Hz-20 kHz ±0.15 dB\u003c\/li\u003e\n\u003cli\u003eIndependent level control on every input and output channel\u003c\/li\u003e\n\u003cli\u003e4x DB25 AES59 for analogue inputs and outputs\u003c\/li\u003e\n\u003cli\u003eAdditional AES3 input\/output on XLR with DARS support\u003c\/li\u003e\n\u003cli\u003eWord Clock input and output on BNC, grand master capability\u003c\/li\u003e\n\u003cli\u003eTwo power supplies with locking IEC inlets and automatic failover\u003c\/li\u003e\n\u003cli\u003eDual primary\/secondary etherCON ports with full redundancy\u003c\/li\u003e\n\u003cli\u003eAES67, AES70 and SMPTE ST 2110 compliance (with Dante Domain Manager)\u003c\/li\u003e\n\u003cli\u003eIncludes the Brainworx bx_console Focusrite plug-in (ISA 110\/ISA 130 emulation)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnalogue I\/O: 16 channels via 4x DB25 AES59\u003c\/li\u003e\n\u003cli\u003eAdditional I\/O: 2-channel AES3\/DARS on XLR\u003c\/li\u003e\n\u003cli\u003eConversion: A-D\/D-A, 119 dB dynamic range, 20 Hz-20 kHz ±0.15 dB\u003c\/li\u003e\n\u003cli\u003eWord Clock: BNC input and output\u003c\/li\u003e\n\u003cli\u003eNetwork: Dante, dual etherCON ports, primary\/secondary redundancy\u003c\/li\u003e\n\u003cli\u003ePower: 2x internal supply with locking IEC inlet\u003c\/li\u003e\n\u003cli\u003eCompliance: AES67, AES70, SMPTE ST 2110 (with Dante Domain Manager)\u003c\/li\u003e\n\u003cli\u003eIndicators: LEDs for PSU, network, sample rate, signal, clock source\u003c\/li\u003e\n\u003cli\u003eChassis: 1U rack-mountable\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":54246847742289,"sku":"53498","price":3875.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteRedNetA16RmkII1.jpg?v=1783947137"},{"product_id":"focusrite-rednet-d16r-mkii","title":"Focusrite RedNet D16R mkII","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eFocusrite RedNet D16R MkII\u003c\/strong\u003e — a bi-directional 16x16 AES3 interface for Dante networks, bridging digital consoles, power amplifiers and other AES\/EBU equipment into an audio-over-IP system with no external conversion needed.\u003c\/p\u003e\n\n\u003cp\u003eTwo DB25 connectors wired to the AES59 standard each carry eight channels of AES3, an additional XLR pair duplicates channels 1-2 as an alternate AES3 or DARS input, and stereo S\/PDIF on RCA connects consumer gear such as CD players or recorders. Everything is set up remotely through RedNet Control and Dante Controller.\u003c\/p\u003e\n\n\u003ch3\u003eAny AES3 source connected without guessing the sample rate\u003c\/h3\u003e\n\u003cp\u003eSample rate conversion runs independently on every input, so external equipment running on a different clock than the Dante network can simply be plugged in and recorded or played back immediately — no manual sample rate matching, no risk of clicks from a mismatched clock. The clock source can be set to internal, Word Clock, DARS, the AES 1-2 or 9-10 input pair, or the Dante network master, letting D16R MkII act as either a follower or the master clock for the whole system.\u003c\/p\u003e\n\n\u003ch3\u003eSignal path redundancy and precise level control\u003c\/h3\u003e\n\u003cp\u003eTwo independent power supplies with locking IEC inlets and automatic failover, plus dual etherCON ports running in redundant, switched or daisy-chain mode, protect against signal loss in both fixed installs and touring rigs. Every input and output channel has independent level control from within RedNet Control, making it possible to calibrate gain staging to a console or amplifier precisely without touching settings on the external device itself.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBi-directional 16x16 AES3 interface for Dante networks\u003c\/li\u003e\n\u003cli\u003e2x DB25 AES59 carrying 8 AES3 channels each, plus XLR and RCA S\/PDIF\u003c\/li\u003e\n\u003cli\u003eSample rate conversion on every input\u003c\/li\u003e\n\u003cli\u003eOperation up to 24-bit\/192 kHz\u003c\/li\u003e\n\u003cli\u003eXLR input with DARS support\u003c\/li\u003e\n\u003cli\u003eWord Clock input and output on BNC\u003c\/li\u003e\n\u003cli\u003eIndependent level control on every input and output channel\u003c\/li\u003e\n\u003cli\u003eTwo power supplies with locking IEC inlets and automatic failover\u003c\/li\u003e\n\u003cli\u003eDual etherCON ports, redundant, switched and daisy-chain modes\u003c\/li\u003e\n\u003cli\u003eIncludes the Brainworx bx_console Focusrite SC channel-strip plug-in\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAES3 channels: 16 in and 16 out via 2x DB25 AES59\u003c\/li\u003e\n\u003cli\u003eAdditional I\/O: 2-channel AES3\/DARS on XLR, 2-channel S\/PDIF on RCA\u003c\/li\u003e\n\u003cli\u003eSample rates: 44.1-192 kHz, 24-bit\u003c\/li\u003e\n\u003cli\u003eWord Clock: BNC in and out, external range ±7.5%\u003c\/li\u003e\n\u003cli\u003eClock sources: internal, Word Clock, DARS, AES 1-2, AES 9-10, Dante Network Master\u003c\/li\u003e\n\u003cli\u003eNetwork: Dante, dual etherCON ports, redundant\/switched\/daisy-chain\u003c\/li\u003e\n\u003cli\u003ePower: 2x internal supply with locking IEC inlet\u003c\/li\u003e\n\u003cli\u003eChassis: 1U rack-mountable\u003c\/li\u003e\n\u003cli\u003eSoftware: RedNet Control, Dante Controller\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":54246847775057,"sku":"53499","price":2583.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteRedNetD16RmkII1.jpg?v=1783947125"},{"product_id":"focusrite-rednet-d64r","title":"Focusrite RedNet D64R","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eFocusrite RedNet D64R\u003c\/strong\u003e — a 1U, fully bi-directional 64x64 bridge between any MADI (AES10) system and a Dante network, with sample rate conversion on every channel and redundant power and network connections.\u003c\/p\u003e\n\n\u003cp\u003eD64R links consoles, processors and other MADI gear into a Dante network through both coaxial BNC and optical SC-Duplex connections, with automatic input selection — the unit senses signal presence and defaults to optical over coaxial when both are connected. Everything is configured through RedNet Control 2 and Dante Controller, with no physical patching required.\u003c\/p\u003e\n\n\u003ch3\u003eBridging MADI and Dante without clocking headaches\u003c\/h3\u003e\n\u003cp\u003eEvery input and output carries its own sample rate converter, so the MADI side and the Dante side can run on independent clocks without losing sync. In standard mode D64R carries 64 channels at 44.1\/48 kHz, 32 at 88.2\/96 kHz and 16 at 176.4\/192 kHz, while varispeed mode (56\/28\/14 channels) keeps the full channel count available even when the Dante network is pulled more than 1% above nominal — a common situation in broadcast facilities running at 25 or 29.97 fps. The clock source — internal, MADI or Word Clock — is set independently on each side of the bridge, and the MADI output can automatically follow the format of the incoming signal.\u003c\/p\u003e\n\n\u003ch3\u003eRedundancy built for live and broadcast environments\u003c\/h3\u003e\n\u003cp\u003eTwo independent power supplies with separate IEC inlets and retaining clips, plus dual etherCON ports running in redundant, switched or daisy-chain mode, remove the single point of failure from the signal path. The status of each power supply and each network port is visible on the front panel in real time, and BNC Word Clock in\/out let D64R lock to house clock or distribute clock to other equipment, independent of the Dante network's own clock domain.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBi-directional 64x64 bridge between MADI and a Dante network\u003c\/li\u003e\n\u003cli\u003eMADI I\/O: coaxial BNC and optical SC-Duplex\u003c\/li\u003e\n\u003cli\u003eSample rate converter (SRC) on every input and output channel\u003c\/li\u003e\n\u003cli\u003e64 channels at 44.1\/48 kHz, 32 at 96 kHz, 16 at 192 kHz\u003c\/li\u003e\n\u003cli\u003eVarispeed mode (56\/28\/14 channels) for a pulled-up Dante network\u003c\/li\u003e\n\u003cli\u003eWord Clock input and output on BNC\u003c\/li\u003e\n\u003cli\u003eTwo independent power supplies with fault detection and status indication\u003c\/li\u003e\n\u003cli\u003eDual etherCON ports, redundant, switched and daisy-chain modes\u003c\/li\u003e\n\u003cli\u003eConfiguration through RedNet Control 2 and Dante Controller, no hardware patching\u003c\/li\u003e\n\u003cli\u003eIncludes the Brainworx bx_console Focusrite SC channel-strip plug-in\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMADI channels: 64x64 standard mode, 56\/28\/14 varispeed\u003c\/li\u003e\n\u003cli\u003eSample rates: 44.1-192 kHz, SRC lock range 41-216 kHz\u003c\/li\u003e\n\u003cli\u003eMADI I\/O: 2x BNC coaxial, 1x SC-Duplex optical\u003c\/li\u003e\n\u003cli\u003eWord Clock: BNC in and out, switchable 75 Ohm termination\u003c\/li\u003e\n\u003cli\u003eClock sources: internal, MADI, Word Clock, Dante network leader\u003c\/li\u003e\n\u003cli\u003eNetwork: Dante, dual etherCON ports, redundant\/switched\/daisy-chain\u003c\/li\u003e\n\u003cli\u003ePower: 2x internal universal supply, 100-240V, 30VA\u003c\/li\u003e\n\u003cli\u003eChassis: 1U, 482.6 x 308 x 44.5 mm, weight 4.32 kg\u003c\/li\u003e\n\u003cli\u003eSoftware: RedNet Control 2, Dante Controller\u003c\/li\u003e\n\u003cli\u003eWarranty: 3 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":54246847840593,"sku":"53500","price":4113.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteRedNetD64R1.jpg?v=1783947117"},{"product_id":"focusrite-rednet-mp8r","title":"Focusrite RedNet MP8R","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eFocusrite RedNet MP8R\u003c\/strong\u003e — an 8-channel remote-controlled microphone preamp and A\/D converter for Dante networks, built for live sound and broadcast environments where equipment failure is not an option.\u003c\/p\u003e\n\n\u003cp\u003eDeveloped from the RedNet 4 studio preamp with direct input from live sound engineers, the MP8R adds dual power supplies with fault detection, dual Ethernet ports with redundant, switched and daisy-chain modes, and a rugged all-metal 1U chassis with locking etherCON connectors and locking power inlets. The status of both power supplies and both network ports is shown locally on the front panel and remotely across the system.\u003c\/p\u003e\n\n\u003ch3\u003eRedundancy that holds up on the road\u003c\/h3\u003e\n\u003cp\u003eTwo independent, fault-detecting power supplies and two etherCON ports give real protection against signal loss during a show or a live broadcast — a failure on one path doesn't drop channels out of the session. The front panel shows the state of each supply and each network port independently, so a problem is visible before it reaches the mix, and switching between redundant, switched and daisy-chain network modes doesn't interrupt the channels already running.\u003c\/p\u003e\n\n\u003ch3\u003eSharing preamps between FOH and monitors\u003c\/h3\u003e\n\u003cp\u003eEach of the eight channels feeds two signals onto the network: a direct feed from the preamp and a second, DSP gain-compensated feed held at a constant level, which makes the unit appear as 16 channels on the Dante network. That lets one engineer ride the analogue gain while a second receives a level that stays constant regardless of those changes — a standard FOH\/monitor split with no extra hardware and no compromise in signal quality. A maximum input level of 28 dBu, dual input impedance of 2.4 or 10 kOhms, and a 20 dB pad give enough headroom for both condenser and dynamic mics working close to high-SPL sources.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e8 remote-controlled Focusrite microphone preamps\u003c\/li\u003e\n\u003cli\u003eA\/D conversion up to 24-bit\/192 kHz with low latency\u003c\/li\u003e\n\u003cli\u003eAutomatic gain compensation — unit appears as 16 channels on the network\u003c\/li\u003e\n\u003cli\u003eDual power supplies with fault detection and status indication\u003c\/li\u003e\n\u003cli\u003eDual etherCON Ethernet ports, redundant, switched and daisy-chain modes\u003c\/li\u003e\n\u003cli\u003eRemote control via RedNet Control, Pro Tools, MIDI and OCA\u003c\/li\u003e\n\u003cli\u003eFront panel with 6-segment LED metering and OLED display\u003c\/li\u003e\n\u003cli\u003eDual input impedance, 20 dB pad, HPF, polarity inversion, phantom power\u003c\/li\u003e\n\u003cli\u003eRugged all-metal 1U chassis, locking power connectors\u003c\/li\u003e\n\u003cli\u003eIncludes the Brainworx bx_console Focusrite SC channel-strip plug-in\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eInputs: 8 mic\/line channels, XLR\u003c\/li\u003e\n\u003cli\u003eA\/D conversion: 24-bit, up to 192 kHz\u003c\/li\u003e\n\u003cli\u003eMaximum input level: 28-29 dBu\u003c\/li\u003e\n\u003cli\u003eInput impedance: switchable 2.4 kOhms or 10 kOhms\u003c\/li\u003e\n\u003cli\u003ePad: 20 dB, high-pass filter, polarity inversion, 48V phantom power\u003c\/li\u003e\n\u003cli\u003eNetwork: Dante, dual etherCON ports, redundant\/switched\/daisy-chain modes\u003c\/li\u003e\n\u003cli\u003ePower: two independent, fault-detecting power supplies\u003c\/li\u003e\n\u003cli\u003eRemote control: RedNet Control, Pro Tools, MIDI, OCA\u003c\/li\u003e\n\u003cli\u003eMetering: 6-segment LED per channel, OLED display per channel\u003c\/li\u003e\n\u003cli\u003eChassis: all-metal, 1U, rack-mountable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":54246847873361,"sku":"53501","price":3711.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteRedNetMP8R1.jpg?v=1783947069"},{"product_id":"focusrite-rednet-r1","title":"Focusrite RedNet R1","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eFocusrite RedNet R1\u003c\/strong\u003e — a desktop remote controller for Red interfaces and any Dante-enabled device, combining source and monitor switching with a full talkback section in one unit.\u003c\/p\u003e\n\n\u003cp\u003eThe unit connects over a single Ethernet cable that carries audio, control data and PoE power at once, so a Red interface can stay racked while every switching decision happens from the desktop. Two colour LCD screens show real-time metering for outputs, sources and headphones, and setup runs through RedNet Control 2 or directly from the front panel.\u003c\/p\u003e\n\n\u003ch3\u003eSource switching without touching the DAW session\u003c\/h3\u003e\n\u003cp\u003eR1 handles up to eight source groups of up to 12 channels each, for a maximum of 32 channels drawn from analogue inputs, ADAT, S\/PDIF, Pro Tools | HD and the Dante network. Switch and sum lets you combine and swap between these sources without repatching or changing routing inside the session — an A\/B switch compares monitor setups on the fly, four fold-down presets check downmixes instantly, and the engineer keeps full control over what actually reaches the monitors regardless of how many workstations are active on the network.\u003c\/p\u003e\n\n\u003ch3\u003eSurround monitoring and talkback in a single box\u003c\/h3\u003e\n\u003cp\u003eUp to 12 monitor output channels cover everything from mono and stereo through 7.1.4, including Dolby Atmos and other immersive formats, with full control over level, reference level, dim, mute and multiple solo modes. Talkback runs over Dante independent of the main signal path — choose the built-in microphone or an XLR input with phantom power, route to up to four destination groups when paired with a Red interface, trigger talkback remotely through the 6.35 mm footswitch input, and drive high-impedance headphones from the high-output headphone amp.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesktop remote controller for monitoring and routing across Red interfaces and Dante devices\u003c\/li\u003e\n\u003cli\u003eUp to 8 source groups of 12 channels each, 32 channels total\u003c\/li\u003e\n\u003cli\u003eUp to 12 monitor output channels, from mono to 7.1.4 and Dolby Atmos\u003c\/li\u003e\n\u003cli\u003eSwitch and sum, A\/B comparison, four fold-down downmix presets\u003c\/li\u003e\n\u003cli\u003eDante-based talkback with built-in microphone or XLR input and phantom power\u003c\/li\u003e\n\u003cli\u003eUp to four talkback destination groups when used with a Red interface\u003c\/li\u003e\n\u003cli\u003eTwo colour LCD screens with metering for outputs, sources and headphones\u003c\/li\u003e\n\u003cli\u003eSetup through RedNet Control 2 or the front panel\u003c\/li\u003e\n\u003cli\u003e6.35 mm footswitch input for talkback and LFE muting\u003c\/li\u003e\n\u003cli\u003ePowered over Ethernet or via the supplied DC power adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNetwork connection: Dante, single Cat 6 Ethernet cable\u003c\/li\u003e\n\u003cli\u003ePower: PoE or external DC power supply\u003c\/li\u003e\n\u003cli\u003eAudio inputs: up to 32 channels across 8 groups of 12\u003c\/li\u003e\n\u003cli\u003eMonitor outputs: up to 12 channels, mono to 7.1.4 formats\u003c\/li\u003e\n\u003cli\u003eMicrophone input: XLR with 48V phantom power, plus internal mic\u003c\/li\u003e\n\u003cli\u003eHeadphone output: high-current amp for high-impedance headphones\u003c\/li\u003e\n\u003cli\u003eDisplays: two colour LCD screens for metering and navigation\u003c\/li\u003e\n\u003cli\u003eExternal input: 6.35 mm jack for footswitch\u003c\/li\u003e\n\u003cli\u003eSoftware: RedNet Control 2 for Mac and Windows\u003c\/li\u003e\n\u003cli\u003eCompatibility: Red interfaces, any Dante device, AES67\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCUSRITE","offers":[{"title":"Default Title","offer_id":54246847906129,"sku":"53502","price":963.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocusriteRedNetR11.jpg?v=1783947061"}],"url":"https:\/\/wrdtunes.com\/fr\/collections\/focusrite.oembed","provider":"Wired Tunes","version":"1.0","type":"link"}