{"product_id":"shure-se535-cl-efs","title":"Shure SE535-CL-EFS","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eShure SE535-CL-EFS\u003c\/strong\u003e – triple balanced-armature in-ear monitors, the flagship of the SE line below the SE846.\n\nThe design runs three balanced-armature drivers per side – one dedicated tweeter and two woofers working in parallel – joined by a passive crossover inside the housing. Splitting the band across three independent sections keeps bass from masking the midrange in dense arrangements, and treble stays defined during long monitoring sessions. The CL-EFS version has a clear housing and a detachable Kevlar-reinforced cable, making it a practical tool for both studio and touring use.\n\n\u003ch3\u003eBand separation in a dense mix\u003c\/h3\u003e\nTwo woofers working in parallel take the load off a single low-frequency driver, so bass stays controlled and fast even when a rhythm section and vocal are both present in the monitor mix. The passive crossover limits distortion at the crossover points, which matters when mixing on headphones during tracking sessions, where accurate level judgment across individual tracks is essential. The 18 Hz to 19 kHz range and 119 dB SPL\/mW sensitivity make fine detail audible at lower volume levels, without pushing the gain toward distortion.\n\n\u003ch3\u003eCable built for touring\u003c\/h3\u003e\nThe Kevlar-reinforced cable runs the full length of the assembly, cutting the risk of a broken conductor from daily packing and unpacking, and the locking MMCX connector rotates a full 360 degrees to route the cable without twisting loose during stage movement. The high sensitivity reduces the load on the source device, which matters when running from bodypack transmitters with limited output power or straight from an audio interface without a dedicated headphone amp.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTriple balanced-armature drivers per side (tweeter and two woofers) with passive crossover\u003c\/li\u003e\n\u003cli\u003ePassive noise isolation up to 37 dB\u003c\/li\u003e\n\u003cli\u003eKevlar-reinforced detachable cable with locking, 360-degree rotating MMCX connector\u003c\/li\u003e\n\u003cli\u003eHigh 119 dB SPL\/mW sensitivity for low-signal sources\u003c\/li\u003e\n\u003cli\u003eFit kit with soft-flex, foam, and triple-flange sleeves in S, M, L\u003c\/li\u003e\n\u003cli\u003eClear housing (CL finish) and carrying case included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransducer type: triple balanced-armature drivers\u003c\/li\u003e\n\u003cli\u003eFrequency range: 18 Hz – 19 kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 119 dB SPL\/mW at 1 kHz\u003c\/li\u003e\n\u003cli\u003eImpedance: 36 Ω at 1 kHz\u003c\/li\u003e\n\u003cli\u003eNoise attenuation: up to 37 dB\u003c\/li\u003e\n\u003cli\u003eCable length: 162 cm (64 in)\u003c\/li\u003e\n\u003cli\u003eOutput connector: gold-plated 3.5mm, 6.3mm adapter included\u003c\/li\u003e\n\u003cli\u003eNet weight: approximately 30 g\u003c\/li\u003e\n\u003cli\u003eManufacturer warranty: 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SHURE","offers":[{"title":"Default Title","offer_id":54207567626577,"sku":"60581","price":545.33,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/ShureSE535-CL-EFS1.jpg?v=1783854014","url":"https:\/\/wrdtunes.com\/fr-fr\/products\/shure-se535-cl-efs","provider":"Wired Tunes","version":"1.0","type":"link"}