{"title":"Microtech Gefell","description":"","products":[{"product_id":"gefell-m930-satin-nickel-with-microphone-holder-mh93-1","title":"Gefell M930 satin nickel (with microphone holder MH93.1)","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eMicrotech Gefell M930 Satin Nickel\u003c\/strong\u003e (with microphone holder MH 93.1) is a compact large-diaphragm cardioid condenser microphone with the M9 capsule (28 mm, gold-sputtered polymer membrane), transformerless output, and an optical capsule polarization circuit — supplied without an external elastic suspension, using the standard MH 93.1 clip holder directly on the microphone body. This is the most straightforward and lightest M930 configuration, intended for environments where stand-borne vibration is not the primary concern, or as a complement to an already-owned EA93 suspension. Self-noise is 7 dBA, maximum SPL is 142 dB, sensitivity is 21 mV\/Pa. Musikmesse International Press Award 2012. Hand-produced and individually measured in Germany.\u003c\/p\u003e\n\n  \u003ch3\u003eOptical polarization circuit and internal capsule isolation\u003c\/h3\u003e\n  \u003cp\u003eAn LED powered from the phantom supply illuminates a photocell, which delivers decoupled high-voltage capsule bias without noise coupling from the phantom power rail — this is responsible for the 142 dB SPL ceiling (4 dB higher than the Neumann TLM103) at an identical self-noise floor of 7 dBA. Both the capsule and electronics are internally elastically suspended within the housing, providing baseline isolation from mechanically transmitted vibrations without an external spider mount. The MH 93.1 is a standard screw-collar clip that attaches to the microphone body at the XLR connector — solid, simple mounting with no additional vibration isolation. Sound On Sound (Hugh Robjohns) notes that the M930 is susceptible to structural vibrations when used with the standard clip, and recommends the EA93 elastic suspension for critical applications. Frequency response: flat with a 2.5–4 dB presence rise from 7 to 11 kHz and a gentle low-frequency roll-off below approximately 100 Hz.\u003c\/p\u003e\n\n  \u003ch3\u003eMH 93.1 — when the standard clip is sufficient\u003c\/h3\u003e\n  \u003cp\u003eThe MH 93.1 is adequate in environments with low structural vibration: freestanding studio stands with rubber feet, no machinery in close proximity, recordings that do not demand extreme sensitivity to floor-borne vibration (broadcasting, podcasting, voice-over at a stable desk, close-miked instruments). For classical recording where the stand is on a concert hall or control room floor with bass bleed, or near drums and speakers, upgrading to the EA93 or EH93P is recommended. The M930 + MH 93.1 configuration is available in satin nickel (order no. 211150) and dark bronze (211151). The variant with EA93 (order no. 212311\/212312) and with EH93P + P110.20 (order no. 2111159\/2111160) are available separately. The microphone ships in a wooden case.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eCompact large-diaphragm cardioid condenser — 120 x 45 mm, 210 g\u003c\/li\u003e\n    \u003cli\u003eM9 capsule: 28 mm, gold-sputtered polymer membrane — designed and built exclusively by Gefell\u003c\/li\u003e\n    \u003cli\u003eLED\/photocell capsule polarization circuit — decoupled high-voltage bias from phantom power\u003c\/li\u003e\n    \u003cli\u003eSelf-noise: 7 dBA (IEC 651); S\/N: 87 dB (A-weighted)\u003c\/li\u003e\n    \u003cli\u003eMaximum SPL: 142 dB at THD below 0.5% — 4 dB higher than Neumann TLM103\u003c\/li\u003e\n    \u003cli\u003eTransformerless discrete output; maximum output level +17 dBu\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 21 mV\/Pa\u003c\/li\u003e\n    \u003cli\u003eFlat response with 2.5–4 dB presence rise from 7 to 11 kHz\u003c\/li\u003e\n    \u003cli\u003eRear rejection above 25 dB\u003c\/li\u003e\n    \u003cli\u003eInternal elastic mounting of capsule and electronics\u003c\/li\u003e\n    \u003cli\u003eVery low RFI susceptibility\u003c\/li\u003e\n    \u003cli\u003eMH 93.1 clip: standard holder without vibration isolation — suitable for low-vibration environments\u003c\/li\u003e\n    \u003cli\u003eUpgrade option: EA93 elastic suspension (order no. 212311) or EH93P\u003c\/li\u003e\n    \u003cli\u003eMusikmesse International Press Award 2012\u003c\/li\u003e\n    \u003cli\u003eFinish: satin nickel; order no. 211150\u003c\/li\u003e\n    \u003cli\u003eIncluded: M930, MH 93.1 clip, wooden case\u003c\/li\u003e\n    \u003cli\u003ePower: 48V phantom\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eAcoustic operating principle: condenser, transformerless\u003c\/li\u003e\n    \u003cli\u003ePolar pattern: cardioid\u003c\/li\u003e\n    \u003cli\u003eCapsule: M9, 28 mm, gold-sputtered polymer membrane\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 40 Hz – 18 kHz\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 21 mV\/Pa (-33.5 dBV re. 1V\/Pa)\u003c\/li\u003e\n    \u003cli\u003eSelf-noise: 7 dBA (IEC 651); S\/N: 87 dB (A)\u003c\/li\u003e\n    \u003cli\u003eMaximum SPL: 142 dB at THD below 0.5%\u003c\/li\u003e\n    \u003cli\u003eMaximum output level: +17 dBu\u003c\/li\u003e\n    \u003cli\u003eOutput impedance: 100 ohms\u003c\/li\u003e\n    \u003cli\u003eRecommended load impedance: 1,000 ohms minimum\u003c\/li\u003e\n    \u003cli\u003ePower: 48V phantom (IEC 268-15)\u003c\/li\u003e\n    \u003cli\u003eCurrent draw: approximately 3 mA\u003c\/li\u003e\n    \u003cli\u003eBody dimensions: 120 mm (L) x 45 mm (diameter)\u003c\/li\u003e\n    \u003cli\u003eWeight: 210 g\u003c\/li\u003e\n    \u003cli\u003eFinish: satin nickel; order no. 211150\u003c\/li\u003e\n    \u003cli\u003eHolder: MH 93.1 (standard clip)\u003c\/li\u003e\n    \u003cli\u003eIncluded: microphone, MH 93.1, wooden case\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Microtech Gefell","offers":[{"title":"Default Title","offer_id":53745383276881,"sku":"58973","price":1253.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/GefellM930satinnickel_withmicrophoneholderMH93.1_1_718243ac-f559-440d-8029-7a446af7476b.jpg?v=1781271955"},{"product_id":"gefell-m990-dark-bronze","title":"Gefell M990 dark bronze","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eMicrotech Gefell M990\u003c\/strong\u003e is a large-diaphragm vacuum tube condenser microphone with a fixed cardioid polar pattern, built around Georg Neumann's original M7 capsule with a PVC membrane — the same capsule technology as the Neumann U47, U48, and M49. The M990 is the only current tube microphone in the Gefell line equipped with the M7 capsule, combining the historically authentic transducer element with a tube amplifier circuit built around an ECC 83 (12AX7). It requires a dedicated external power supply included in the set. Sensitivity is 22 mV\/Pa, self-noise is 14 dBA, and maximum SPL is 136 dB. The large conventional cylindrical steel body in dark bronze finish is substantially more massive than the compact UMT 70S carrying the same capsule. Hand-built in Gefell, Germany.\u003c\/p\u003e\n\n  \u003ch3\u003eECC 83 tube and M7 capsule — historical pairing in a modern instrument\u003c\/h3\u003e\n  \u003cp\u003eThe M7 capsule in the M990 uses PVC as the membrane material — the same technology used in the Neumann U47, U48, and M49, and the most demanding of all capsule membrane materials in terms of manufacturing skill. The ECC 83 (12AX7) is a dual triode, a classic tube used in low-noise audio signal circuits, referencing the tradition of studio tube microphones from the 1950s and 1960s. The tube circuit adds the characteristic harmonic saturation and transient compression typical of thermionic devices, imparting depth and warmth to the recorded signal that is unavailable in FET designs. The M990 requires a warm-up period before recording (approximately 3–5 minutes) and is more sensitive to ambient temperature variations than FET microphones — standard characteristics for a tube microphone of this class. The included power supply delivers plate voltage and filament supply; the microphone connects to the power supply via a multi-pin cable, with a standard 3-pin XLR output from the supply to the preamplifier.\u003c\/p\u003e\n\n  \u003ch3\u003eApplications and position in the Gefell line\u003c\/h3\u003e\n  \u003cp\u003eThe M990 is intended for engineers and producers who need the tube character combined with the historical authenticity of the M7 capsule — in vocal, instrumental, and acoustic applications demanding maximum depth and presence. The advantage of the M990 over the FET M7 microphones (UMT 70S, MT 71S) is subjective and stylistic: tube compression, subtle harmonic saturation, and the characteristic liveness of a tube microphone. Compared to the M930 (M9 capsule, FET): the M990 adds the depth and warmth of the tube circuit, while the M930 delivers lower self-noise and higher maximum SPL. Primary applications: studio vocals, piano, string instruments, voice-over, brass, and wind sections. The dark bronze body finish matches the historical Gefell aesthetic and coordinates with other Gefell accessories in this color.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eTube large-diaphragm cardioid condenser microphone with M7 Neumann capsule\u003c\/li\u003e\n    \u003cli\u003eM7 capsule: single-sided gold-sputtered PVC membrane — same technology as U47, U48, M49\u003c\/li\u003e\n    \u003cli\u003eTube: ECC 83 (12AX7) — classic dual triode for audio signal circuits\u003c\/li\u003e\n    \u003cli\u003eRequires dedicated external power supply (included)\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 22 mV\/Pa\u003c\/li\u003e\n    \u003cli\u003eSelf-noise: 14 dBA\u003c\/li\u003e\n    \u003cli\u003eMaximum SPL: 136 dB at THD below 0.5%\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 40 Hz – 18 kHz\u003c\/li\u003e\n    \u003cli\u003eFixed cardioid polar pattern\u003c\/li\u003e\n    \u003cli\u003eTube circuit: harmonic saturation and transient compression — depth and warmth unavailable in FET\u003c\/li\u003e\n    \u003cli\u003eWarm-up period required: approximately 3–5 minutes\u003c\/li\u003e\n    \u003cli\u003eLarge cylindrical steel body — more massive than UMT 70S \/ MT 71S\u003c\/li\u003e\n    \u003cli\u003eFinish: dark bronze\u003c\/li\u003e\n    \u003cli\u003eHand-built and individually measured in Germany\u003c\/li\u003e\n    \u003cli\u003eIncluded: microphone, dedicated power supply, multi-pin cable, shockmount, wooden case\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eAcoustic operating principle: tube condenser\u003c\/li\u003e\n    \u003cli\u003ePolar pattern: cardioid (fixed)\u003c\/li\u003e\n    \u003cli\u003eCapsule: M7, single-sided gold-sputtered PVC membrane\u003c\/li\u003e\n    \u003cli\u003eTube: ECC 83 (12AX7)\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 40 Hz – 18 kHz\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 22 mV\/Pa (-33 dB re. 1V\/Pa)\u003c\/li\u003e\n    \u003cli\u003eSelf-noise: 14 dBA (IEC 651)\u003c\/li\u003e\n    \u003cli\u003eMaximum SPL: 136 dB at THD below 0.5%\u003c\/li\u003e\n    \u003cli\u003eOutput impedance: 200 ohms\u003c\/li\u003e\n    \u003cli\u003eRecommended load impedance: 1,000 ohms minimum\u003c\/li\u003e\n    \u003cli\u003ePower: dedicated external power supply (included)\u003c\/li\u003e\n    \u003cli\u003eBody dimensions: approximately 185 mm (L) x 55 mm (diameter)\u003c\/li\u003e\n    \u003cli\u003eWeight: approximately 490 g\u003c\/li\u003e\n    \u003cli\u003eFinish: dark bronze (alternative: satin nickel)\u003c\/li\u003e\n    \u003cli\u003eIncluded: M990 microphone, dedicated power supply, multi-pin cable, EA 92 shockmount, wooden case\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Microtech Gefell","offers":[{"title":"Default Title","offer_id":53745383342417,"sku":"59060","price":2865.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/GefellM990darkbronze1.jpg?v=1778576717"},{"product_id":"gefell-mt71s-satin-nickel","title":"Gefell MT71S satin nickel","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eMicrotech Gefell MT 71S\u003c\/strong\u003e is an active large-diaphragm condenser microphone with a switchable polar pattern, built around Georg Neumann's original M7 capsule with a PVC membrane — technologically identical to the capsules used in the Neumann U47, U48, and M49. The MT 71S is a direct extension of the UMT 70S: it retains the same M7 capsule, transformerless discrete FET amplifier, and historical body design, adding a three-position polar pattern switch (cardioid, figure-eight, omnidirectional) on the rear of the housing. Sensitivity is 22 mV\/Pa, self-noise is 12 dBA, and maximum SPL is 140 dB. Hand-built in Gefell, Germany. The satin nickel finish matches the Gefell accessory line in this color, including compatibility with the Rycote INV 7HG MK III suspension and P110 INV 7 pop screen.\u003c\/p\u003e\n\u003ch3\u003eM7 capsule and three patterns — range of applications without changing the microphone\u003c\/h3\u003e\n\u003cp\u003eThe PVC membrane of the M7 capsule is technically demanding to manufacture and represents one of the primary justifications for the MT 71S's price: the material delivers the historically proven openness, natural high-frequency character, and three-dimensional spatial quality that defined the classic Neumann microphone sound for decades. The pattern switch enables cardioid operation (close vocals, solo instruments, rejection of surroundings), figure-eight (M\/S recording as the Mid or Side element, stereo dialogue recording, bidirectional interview work), and omni (ambient, choral, and orchestral recording with natural room acoustics). The transformerless FET output delivers low self-noise while preserving the capsule's character without requiring a dedicated tube power supply. The cylindrical steel body with a steel mesh grille maintains the historical Gefell aesthetic with modern manufacturing precision.\u003c\/p\u003e\n\u003ch3\u003eMT 71S vs UMT 70S and applications\u003c\/h3\u003e\n\u003cp\u003eThe only technical difference between the MT 71S and UMT 70S is the addition of the three-position polar pattern switch — the M7 capsule, electronics, body, and all measured parameters are identical. The MT 71S is preferred wherever polar pattern flexibility is a priority: single-microphone sessions covering different sources throughout a day, M\/S configurations using one MT 71S as the Side element (figure-eight), choral and orchestral recording in omni with the option to switch to cardioid for close-miking soloists. Matched pairs in Blumlein configuration (two figure-eights at 90 degrees) produce coherent, natural stereo imaging for chamber recording. Primary applications: studio vocals, acoustic instruments, piano, classical guitar, chamber recording, broadcasting. Includes microphone, MH 93.1 clip, and wooden case.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eActive large-diaphragm condenser microphone with M7 capsule and 3 switchable polar patterns\u003c\/li\u003e\n\u003cli\u003eM7 capsule: single-sided gold-sputtered PVC membrane — same technology as U47, U48, M49\u003c\/li\u003e\n\u003cli\u003ePattern switch: cardioid \/ figure-eight \/ omni (rear of housing)\u003c\/li\u003e\n\u003cli\u003eTransformerless discrete FET amplifier — low noise, 48V phantom operation\u003c\/li\u003e\n\u003cli\u003eSensitivity: 22 mV\/Pa\u003c\/li\u003e\n\u003cli\u003eSelf-noise: 12 dBA\u003c\/li\u003e\n\u003cli\u003eMaximum SPL: 140 dB at THD below 0.5%\u003c\/li\u003e\n\u003cli\u003eFrequency response: 40 Hz – 18 kHz\u003c\/li\u003e\n\u003cli\u003eCylindrical steel body with steel mesh grille — historical Gefell aesthetic\u003c\/li\u003e\n\u003cli\u003eCompatible with Rycote INV 7HG MK III and P110 INV 7 pop screen\u003c\/li\u003e\n\u003cli\u003eAvailable in factory-matched stereo pairs\u003c\/li\u003e\n\u003cli\u003eFinish: satin nickel (alternative: dark bronze)\u003c\/li\u003e\n\u003cli\u003eHand-built and individually measured in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAcoustic operating principle: condenser, transformerless, FET\u003c\/li\u003e\n\u003cli\u003ePolar patterns: cardioid \/ figure-eight \/ omni (rear panel switch)\u003c\/li\u003e\n\u003cli\u003eCapsule: M7, single-sided gold-sputtered PVC membrane\u003c\/li\u003e\n\u003cli\u003eFrequency response: 40 Hz – 18 kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 22 mV\/Pa (-33 dB re. 1V\/Pa)\u003c\/li\u003e\n\u003cli\u003eSelf-noise: 12 dBA (IEC 651)\u003c\/li\u003e\n\u003cli\u003eMaximum SPL: 140 dB at THD below 0.5%\u003c\/li\u003e\n\u003cli\u003eOutput impedance: 50 ohms\u003c\/li\u003e\n\u003cli\u003eRecommended load impedance: 1,000 ohms minimum\u003c\/li\u003e\n\u003cli\u003ePower: 48V phantom (IEC 268-15)\u003c\/li\u003e\n\u003cli\u003eDimensions: approximately 160 mm (L) x 50 mm (diameter)\u003c\/li\u003e\n\u003cli\u003eWeight: approximately 330 g\u003c\/li\u003e\n\u003cli\u003eFinish: satin nickel (alternative: dark bronze)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Microtech Gefell","offers":[{"title":"Default Title","offer_id":53745383801169,"sku":"58970","price":1386.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/GefellMT71Ssatinnickel1.jpg?v=1778576696"},{"product_id":"gefell-umt70s-satin-nickel","title":"Gefell UMT70S satin nickel","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eMicrotech Gefell UMT 70S\u003c\/strong\u003e is an active large-diaphragm cardioid condenser microphone built around the original Georg Neumann M7 capsule — the same capsule that defined the sound of the Neumann U47, U48, and M49. The M7 capsule in the UMT 70S uses PVC (polyvinyl chloride) as the membrane material — identical technology to the original 1928 design, not the polymer used in the M9 capsules of the M930 family. A transformerless discrete FET amplifier provides a sensitivity of 22 mV\/Pa, self-noise of 12 dBA, and a maximum SPL of 140 dB. The cylindrical steel body with a steel mesh grille echoes the aesthetic and mechanical tradition of historical Gefell microphones. Hand-built in Gefell, Germany. The satin nickel finish matches the rest of the Gefell accessory line in this color.\u003c\/p\u003e\n\n  \u003ch3\u003eM7 capsule — PVC membrane and the Neumann legacy\u003c\/h3\u003e\n  \u003cp\u003eGeorg Neumann designed the M7 capsule at the Gefell facility, where the company has operated continuously since 1928. The PVC membrane is technically demanding to manufacture, but delivers the distinctive openness, natural high-frequency character, and three-dimensional quality that historical Neumann microphones were associated with for decades. The UMT 70S is one of only a handful of microphones in current production using an authentic M7 capsule with a PVC membrane — the same material originally used in the U47, U48, and M49. The transformerless FET output delivers low self-noise while preserving the capsule's character; unlike tube microphones, it requires no dedicated power supply and operates directly from 48V phantom power. The cardioid polar pattern is fixed — there is no pattern selector switch. The body and mesh grille maintain the historical Gefell aesthetic with modern manufacturing precision.\u003c\/p\u003e\n\n  \u003ch3\u003eApplications and position in the Gefell line\u003c\/h3\u003e\n  \u003cp\u003eThe UMT 70S is the first choice for vocals requiring the warm, natural, historically significant M7 character without the variability and complexity of a tube circuit — particularly for classical vocals, jazz, folk, and spoken word. It excels on acoustic instruments, particularly piano and classical guitar, where the M7 capsule's openness and naturalness offer a distinct advantage over the M9 character (M930). Matched UMT 70S pairs in ORTF or X-Y configuration deliver coherent, natural stereo imaging for chamber and choral recording. Combined with the Rycote INV 7HG MK III suspension (which accepts the P110 INV 7 pop screen), the microphone operates discreetly in broadcast and television studio environments. Available in factory-matched stereo pairs. Hand-built and individually measured in Germany.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eActive large-diaphragm cardioid condenser microphone with original Neumann M7 capsule\u003c\/li\u003e\n    \u003cli\u003eM7 capsule: PVC membrane — same technology as U47, U48, M49; manufactured exclusively by Gefell\u003c\/li\u003e\n    \u003cli\u003eTransformerless discrete FET amplifier — low noise without a tube power supply\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 22 mV\/Pa\u003c\/li\u003e\n    \u003cli\u003eSelf-noise: 12 dBA\u003c\/li\u003e\n    \u003cli\u003eMaximum SPL: 140 dB at THD below 0.5%\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 40 Hz – 18 kHz\u003c\/li\u003e\n    \u003cli\u003eFixed cardioid polar pattern (no pattern selector)\u003c\/li\u003e\n    \u003cli\u003eCylindrical steel body with steel mesh grille — historical Gefell aesthetic\u003c\/li\u003e\n    \u003cli\u003ePower: 48V phantom — direct operation without a dedicated power supply\u003c\/li\u003e\n    \u003cli\u003eCompatible with Rycote INV 7HG MK III suspension and P110 INV 7 pop screen\u003c\/li\u003e\n    \u003cli\u003eAvailable in factory-matched stereo pairs\u003c\/li\u003e\n    \u003cli\u003eFinish: satin nickel\u003c\/li\u003e\n    \u003cli\u003eHand-built and individually measured in Germany\u003c\/li\u003e\n    \u003cli\u003eIncluded: microphone, MH 93.1 clip, wooden case\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eAcoustic operating principle: condenser, transformerless, FET\u003c\/li\u003e\n    \u003cli\u003ePolar pattern: cardioid (fixed)\u003c\/li\u003e\n    \u003cli\u003eCapsule: M7, single-sided gold-sputtered PVC membrane\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 40 Hz – 18 kHz\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 22 mV\/Pa (-33 dB re. 1V\/Pa)\u003c\/li\u003e\n    \u003cli\u003eSelf-noise: 12 dBA (IEC 651)\u003c\/li\u003e\n    \u003cli\u003eMaximum SPL: 140 dB at THD below 0.5%\u003c\/li\u003e\n    \u003cli\u003eOutput impedance: 50 ohms\u003c\/li\u003e\n    \u003cli\u003eRecommended load impedance: 1,000 ohms minimum\u003c\/li\u003e\n    \u003cli\u003ePower: 48V phantom (IEC 268-15)\u003c\/li\u003e\n    \u003cli\u003eDimensions: approximately 160 mm (L) x 50 mm (diameter)\u003c\/li\u003e\n    \u003cli\u003eWeight: approximately 330 g\u003c\/li\u003e\n    \u003cli\u003eFinish: satin nickel (alternative: dark bronze)\u003c\/li\u003e\n    \u003cli\u003eIncluded: UMT 70S microphone, MH 93.1 clip, wooden case\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Microtech Gefell","offers":[{"title":"Default Title","offer_id":53745383833937,"sku":"58965","price":1856.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/GefellUMT70Ssatinnickel1.jpg?v=1778576683"},{"product_id":"gefell-m300-dark-bronze","title":"Gefell M300 dark bronze","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eMicrotech Gefell M300\u003c\/strong\u003e is a small-diaphragm cardioid condenser microphone in a compact cylindrical body, hand-built in Gefell, Germany. The MK 301 S capsule — designed and manufactured exclusively by Gefell — is the core of the microphone: an 18.6 mm element with a gold-sputtered polymer membrane, drawing on the capsule heritage that traces back to Georg Neumann's founding years in Gefell. A transformerless output maintains self-noise at 14 dBA with a sensitivity of -40 dB (10 mV\/Pa) and a maximum SPL of 142 dB. The compact dimensions (135 x 22 mm, 95 g) make the M300 unusually easy to position in tight spaces — drum overheads, piano, acoustic guitar, ensemble. The dark bronze finish distinguishes it visually from the satin nickel variant. Hand-built and individually measured in Germany.\u003c\/p\u003e\n\n  \u003ch3\u003eMK 301 S capsule and transformerless electronics\u003c\/h3\u003e\n  \u003cp\u003eThe MK 301 S capsule is a Gefell design based on an 18.6 mm gold-sputtered polymer membrane — the small-diaphragm sibling of the capsule tradition from the Gefell facility, carrying forward the sonic philosophy of the company Georg Neumann founded in this town in 1928. The transformerless output circuit provides very low output impedance and minimizes phase distortion — relevant when summing stereo to mono or combining multiple microphones in complex setups. The frequency response from 40 Hz to 18 kHz carries a gentle presence rise around 7–12 kHz, adding natural clarity and openness without edginess. The polar pattern remains consistent and narrows appropriately at high frequencies — typical of a well-designed small-diaphragm cardioid, and particularly useful in close-mic multi-microphone configurations where mutual isolation is a priority. RFI susceptibility is very low. Internal elastic mounting of the capsule and electronics reduces mechanically transmitted vibration without a dedicated external spider.\u003c\/p\u003e\n\n  \u003ch3\u003eApplications and position in the Gefell line\u003c\/h3\u003e\n  \u003cp\u003eThe M300 complements the large-diaphragm Gefell microphones in applications requiring precise positioning in small spaces or consistent multi-directional behavior in multi-microphone setups. Reviewers consistently note its natural, clean reproduction of acoustic guitar and acoustic instruments — without the exaggerated presence peaks typical of many competing small-diaphragm condensers. It pairs naturally with the M930 in complementary configurations: ribbon or LDC as the primary microphone, M300 as the close or spot microphone. The microphone ships with the MH 300 clip and a wooden case. Available in factory-matched stereo pairs for ORTF, X-Y, and Blumlein configurations.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eSmall-diaphragm cardioid condenser microphone, hand-built in Germany\u003c\/li\u003e\n    \u003cli\u003eMK 301 S capsule: 18.6 mm, gold-sputtered polymer membrane — designed and built exclusively by Gefell\u003c\/li\u003e\n    \u003cli\u003eTransformerless output — minimal phase distortion, low output impedance\u003c\/li\u003e\n    \u003cli\u003eSelf-noise: 14 dBA\u003c\/li\u003e\n    \u003cli\u003eMaximum SPL: 142 dB at THD below 0.5%\u003c\/li\u003e\n    \u003cli\u003eSensitivity: -40 dB (10 mV\/Pa)\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 40 Hz – 18 kHz\u003c\/li\u003e\n    \u003cli\u003eGentle 7–12 kHz presence rise — natural clarity without edginess\u003c\/li\u003e\n    \u003cli\u003eStable cardioid polar pattern, well-controlled high-frequency narrowing\u003c\/li\u003e\n    \u003cli\u003eVery low RFI susceptibility\u003c\/li\u003e\n    \u003cli\u003eInternal elastic mounting of capsule and electronics\u003c\/li\u003e\n    \u003cli\u003eCompact dimensions 135 x 22 mm, 95 g — easy positioning in tight spaces\u003c\/li\u003e\n    \u003cli\u003eDark bronze finish\u003c\/li\u003e\n    \u003cli\u003eAvailable in factory-matched stereo pairs\u003c\/li\u003e\n    \u003cli\u003eIncluded: microphone, MH 300 clip, wooden case\u003c\/li\u003e\n    \u003cli\u003ePower: 48V phantom\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eAcoustic operating principle: condenser, transformerless\u003c\/li\u003e\n    \u003cli\u003ePolar pattern: cardioid\u003c\/li\u003e\n    \u003cli\u003eCapsule: MK 301 S, 18.6 mm, gold-sputtered polymer membrane\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 40 Hz – 18 kHz\u003c\/li\u003e\n    \u003cli\u003eSensitivity: -40 dB re. 1V\/Pa (10 mV\/Pa)\u003c\/li\u003e\n    \u003cli\u003eSelf-noise: 14 dBA (IEC 651)\u003c\/li\u003e\n    \u003cli\u003eMaximum SPL: 142 dB at THD below 0.5%\u003c\/li\u003e\n    \u003cli\u003eOutput impedance: 50 ohms\u003c\/li\u003e\n    \u003cli\u003eRecommended load impedance: 1,000 ohms minimum\u003c\/li\u003e\n    \u003cli\u003ePower: 48V phantom (IEC 268-15)\u003c\/li\u003e\n    \u003cli\u003eDimensions: 135 mm (L) x 22 mm (diameter)\u003c\/li\u003e\n    \u003cli\u003eWeight: 95 g\u003c\/li\u003e\n    \u003cli\u003eFinish: dark bronze (alternative: satin nickel)\u003c\/li\u003e\n    \u003cli\u003eIncluded: M300 microphone, MH 300 clip, wooden case\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Microtech Gefell","offers":[{"title":"Default Title","offer_id":53745383899473,"sku":"58966","price":893.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/GefellM300darkbronze1.jpg?v=1778576659"},{"product_id":"gefell-angle-popscreen-p110-black-matt-with-rycote-inv-7hg-mk-iii","title":"Gefell Angle Popscreen P110 black matt with RYCOTE INV 7HG MK III","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eMicrotech Gefell Angle Popscreen P110 Black Matt with Rycote INV 7HG MK III\u003c\/strong\u003e is a bundle combining the Gefell P110 INV 7 pop screen — a special-mount version of the P110 designed to attach directly to the Rycote INV 7HG MK III suspension cradle — with the suspension itself, forming a complete ready-to-use system for Gefell UMT 70S and MT 71S microphones mounted in the Rycote cradle. The P110 INV 7 replaces the standard P110 mic-body clip with a mounting bracket engineered for the Rycote INV 7HG MK III lyre, eliminating the need for a separate gooseneck arm or stand clamp. The filter element: a 105 mm diameter, 20 mm thick disc of coarse, hydrophobic open-cell foam — the same acoustic principle as the Rycote InVision Studio system and the Håkan P110 Pop Killer line. The Rycote INV 7HG MK III is a heavy-duty dual-lyre suspension on a star-knob swivel, designed for microphones 19–34 mm in diameter and optimized for front-heavy microphones or those used with slip-on windscreens.\u003c\/p\u003e\n\n  \u003ch3\u003eP110 INV 7 — open-cell foam, mounted on Rycote\u003c\/h3\u003e\n  \u003cp\u003eThe P110 filter disc is made from thick (20 mm), relatively coarse, hydrophobic open-cell foam. The mechanism differs fundamentally from metal louvered or nylon mesh designs: the foam absorbs the plosive airstream without diffusing the acoustic wave, leaving the sound signal undisturbed. Sound On Sound (Hugh Robjohns, Håkan P110 review) described the effect as completely transparent — no tonal coloration, no high-frequency attenuation. The hydrophobic foam does not absorb moisture and is easy to clean; replacement foam discs are available separately. The INV 7 variant carries a dedicated mounting attachment for the Rycote INV 7HG MK III cradle, so the pop screen sits in front of the microphone without any additional hardware. Black matt finish.\u003c\/p\u003e\n\n  \u003ch3\u003eRycote INV 7HG MK III — heavy-duty Lyre cradle\u003c\/h3\u003e\n  \u003cp\u003eThe Rycote INV 7HG MK III belongs to the InVision Broadcast family — designed for TV, film, and broadcast studio environments requiring a low-profile, discreet shockmount with no windshielding. Two Lyre suspension webs manufactured from Hytrel (thermoplastic elastomer with exceptional durability and resistance to aging and fatigue) hold the microphone from the rear, leaving the front face clear for fitting foam windscreens without dismounting the suspension. A heavy-duty star-knob swivel allows the microphone to be angled and locked in any position. The 3\/8\" threaded base with a 5\/8\" adapter accommodates standard stands, boom arms, and boom poles. A built-in cable clamp reduces cable-borne noise. The INV 7HG MK III cradle accepts microphones 19–34 mm in diameter and is specifically intended for front-heavy microphones or those used with Softie or Baby Ballgag windshields.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eBundle: Gefell Angle Popscreen P110 INV 7 Black Matt + Rycote INV 7HG MK III\u003c\/li\u003e\n    \u003cli\u003eP110 INV 7: dedicated mounting for Rycote INV 7HG MK III cradle (replaces standard mic-body clip)\u003c\/li\u003e\n    \u003cli\u003eFilter disc: hydrophobic open-cell foam, 105 mm diameter, 20 mm thick\u003c\/li\u003e\n    \u003cli\u003eOpen-cell foam: zero tonal coloration, no HF attenuation — plosive absorption without acoustic diffusion\u003c\/li\u003e\n    \u003cli\u003eHydrophobic foam: no moisture absorption, easy to clean\u003c\/li\u003e\n    \u003cli\u003eReplaceable foam disc (spare foam sold separately)\u003c\/li\u003e\n    \u003cli\u003eP110 compatible microphones: UMT 70S, MT 71S (in Rycote INV 7HG MK III cradle)\u003c\/li\u003e\n    \u003cli\u003eP110 finish: black matt\u003c\/li\u003e\n    \u003cli\u003eRycote INV 7HG MK III: dual Hytrel Lyre suspension on star-knob swivel\u003c\/li\u003e\n    \u003cli\u003eAccommodates microphones 19–34 mm in diameter\u003c\/li\u003e\n    \u003cli\u003eRear-entry cradle — front face clear for slip-on foam windscreens\u003c\/li\u003e\n    \u003cli\u003e3\/8\" threaded base with 5\/8\" adapter — stand, boom arm, boom pole\u003c\/li\u003e\n    \u003cli\u003eBuilt-in cable clamp\u003c\/li\u003e\n    \u003cli\u003eLyre cradle dimensions: 70 mm (H) x 40 mm (W)\u003c\/li\u003e\n    \u003cli\u003eHytrel construction: virtually indestructible, age-resistant\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: open-cell foam pop filter + heavy-duty Lyre suspension\u003c\/li\u003e\n    \u003cli\u003eP110 INV 7 — filter material: hydrophobic open-cell foam\u003c\/li\u003e\n    \u003cli\u003eP110 INV 7 — disc diameter: 105 mm\u003c\/li\u003e\n    \u003cli\u003eP110 INV 7 — disc thickness: 20 mm\u003c\/li\u003e\n    \u003cli\u003eP110 INV 7 — mounting: directly on Rycote INV 7HG MK III cradle\u003c\/li\u003e\n    \u003cli\u003eP110 INV 7 — finish: black matt\u003c\/li\u003e\n    \u003cli\u003eP110 INV 7 — compatible mics: UMT 70S, MT 71S (in INV 7HG MK III)\u003c\/li\u003e\n    \u003cli\u003eRycote INV 7HG MK III — suspension: dual Hytrel Lyre webs\u003c\/li\u003e\n    \u003cli\u003eRycote INV 7HG MK III — mic diameter: 19–34 mm\u003c\/li\u003e\n    \u003cli\u003eRycote INV 7HG MK III — cradle dimensions: 70 mm (H) x 40 mm (W)\u003c\/li\u003e\n    \u003cli\u003eRycote INV 7HG MK III — swivel: star-knob\u003c\/li\u003e\n    \u003cli\u003eRycote INV 7HG MK III — mount: 3\/8\" thread + 5\/8\" adapter\u003c\/li\u003e\n    \u003cli\u003eRycote INV 7HG MK III — cable management: built-in cable clamp\u003c\/li\u003e\n    \u003cli\u003eRycote INV 7HG MK III — catalog number: RYC041118\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Microtech Gefell","offers":[{"title":"Default Title","offer_id":53745383997777,"sku":"58971","price":390.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/gefell.jpg?v=1780668395"},{"product_id":"gefell-eh93-p-satin-nickel","title":"Gefell EH93 P satin nickel","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eMicrotech Gefell EH93 P\u003c\/strong\u003e is a rubber vibration isolator — a single-piece isolation mount made from soft POM\/rubber, designed as a more compact and economical alternative to the elastic suspension EA93 for Gefell M930\/M940\/M950 series microphones. The EH93 P mounts directly on a standard microphone stand thread and receives the microphone through an internal rubber damping ring — unlike the EA93, it contains no elastic bands or spider cage, isolating vibrations through a dampening rubber bushing instead. The satin nickel finish matches the M930 and the rest of the series. Compact and lightweight, it is the right choice when the full EA93 is unnecessary or when space is limited.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eRubber vibration isolator for Gefell M930\/M940\/M950 series microphones\u003c\/li\u003e\n    \u003cli\u003eSingle-piece design — no elastic bands; isolation via rubber damping bushing\u003c\/li\u003e\n    \u003cli\u003eAlternative to EA93: lower cost, compact form factor, straightforward installation\u003c\/li\u003e\n    \u003cli\u003eSatin nickel finish — matches M930, M940, M950 satin nickel\u003c\/li\u003e\n    \u003cli\u003eDirect mount on standard microphone stand thread\u003c\/li\u003e\n    \u003cli\u003eCompatible with: M930, M940, M950, M960, M930 Ts, UMT 70S, MT 71S\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: rubber vibration isolator (rubber isolation mount)\u003c\/li\u003e\n    \u003cli\u003eMaterial: POM \/ soft damping rubber\u003c\/li\u003e\n    \u003cli\u003eFinish: satin nickel\u003c\/li\u003e\n    \u003cli\u003eMounting: direct fit on standard microphone stand thread (5\/8\")\u003c\/li\u003e\n    \u003cli\u003eCompatible microphones: M930, M940, M950, M960, M930 Ts, UMT 70S, MT 71S\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Microtech Gefell","offers":[{"title":"Default Title","offer_id":53745384456529,"sku":"58972","price":261.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/GefellEH93Psatinnickel.jpg?v=1778576625"},{"product_id":"gefell-m930-satin-nickel-with-elastic-suspension-ea93-satin-and-adaptor-a93-satin-pom-two-parts","title":"Gefell M930 satin nickel (with elastic suspension EA93 satin and adaptor A93 satin \/ POM (two-parts))","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eMicrotech Gefell M930 Satin Nickel\u003c\/strong\u003e (with elastic suspension EA93 Satin and adapter A93 Satin \/ POM, two-part) is a compact large-diaphragm cardioid condenser microphone built around the M9 28mm capsule with a gold-sputtered polymer membrane and a transformerless output circuit. The steel body at 120 x 45 mm and 210 g places the M930 among the smallest genuine large-diaphragm condenser microphones available — considerably easier to position than conventionally sized LDCs. The defining technical innovation is an LED\/photocell capsule polarization circuit: an LED powered from the phantom supply illuminates a photocell, which delivers a decoupled high-voltage capsule bias with no noise coupling from the phantom power rail. The result is 7 dBA self-noise and a maximum SPL of 142 dB — 4 dB higher than the Neumann TLM103 at identical self-noise. Sound On Sound named the M930 among their most-admired large-diaphragm microphones; it received the Musikmesse International Press Award 2012. Hand-produced and individually measured in Gefell, Germany.\u003c\/p\u003e\n\n  \u003ch3\u003eOptical polarization circuit and internal capsule isolation\u003c\/h3\u003e\n  \u003cp\u003eBoth the capsule and electronics of the M930 are internally elastically suspended inside the housing — providing baseline isolation from mechanically transmitted vibrations without an external spider mount. The transformerless discrete output stage with a newly developed impedance conversion topology reduces noise to 7 dBA (IEC 651) at an S\/N ratio of 87 dBA and maintains a maximum output level of +17 dBu. The frequency response is flat with a gentle low-frequency roll-off below approximately 100 Hz and a broad 2.5–4 dB presence rise from 7 to 11 kHz — sufficient to add openness and air without triggering sibilance. The cardioid pattern rejects rear signals by more than 25 dB. RFI susceptibility is very low. The set includes the M930 in satin nickel finish, the EA93 elastic suspension in satin nickel with a built-in two-part A93 POM adapter sized for the M930 body, and a wooden case.\u003c\/p\u003e\n\n  \u003ch3\u003eEA93 and A93 adapter — practical vibration isolation\u003c\/h3\u003e\n  \u003cp\u003eThe EA93 elastic suspension (satin nickel) is designed for the M930, M940, M950, M960, M930 Ts, UMT 70S, and MT 71S. The two-part A93 adapter is manufactured from POM (polyoxymethylene) — a precision engineering plastic that, combined with the elastic elements of the EA93 spider, isolates the microphone from floor- and stand-borne vibrations. In studio environments where the M930 is known to be susceptible to structural vibration when mounted in the hard clip MH93.1, the EA93 eliminates that sensitivity entirely. Primary applications for the M930: studio and broadcast vocals, orchestral recording as a spot mic and as an ORTF\/X-Y stereo pair, strings, woodwinds, piano, acoustic guitar, drum overheads, voice-over, podcasting, and room miking. Available in factory-matched stereo pairs for ORTF and X-Y configurations.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eCompact large-diaphragm cardioid condenser — 120 x 45 mm, 210 g\u003c\/li\u003e\n    \u003cli\u003eM9 capsule: 28 mm, gold-sputtered polymer membrane, single-sided design\u003c\/li\u003e\n    \u003cli\u003eLED\/photocell capsule polarization circuit — decoupled high-voltage bias from phantom power\u003c\/li\u003e\n    \u003cli\u003eSelf-noise: 7 dBA (IEC 651); S\/N: 87 dB (A-weighted)\u003c\/li\u003e\n    \u003cli\u003eMaximum SPL: 142 dB at THD below 0.5% — 4 dB higher than Neumann TLM103\u003c\/li\u003e\n    \u003cli\u003eTransformerless discrete output; maximum output level +17 dBu\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 21 mV\/Pa\u003c\/li\u003e\n    \u003cli\u003eFlat response with 2.5–4 dB presence rise from 7 to 11 kHz\u003c\/li\u003e\n    \u003cli\u003eRear rejection above 25 dB\u003c\/li\u003e\n    \u003cli\u003eInternal elastic suspension of capsule and electronics inside housing\u003c\/li\u003e\n    \u003cli\u003eVery low RFI susceptibility\u003c\/li\u003e\n    \u003cli\u003eMusikmesse International Press Award 2012\u003c\/li\u003e\n    \u003cli\u003eHand-produced and individually measured in Germany\u003c\/li\u003e\n    \u003cli\u003eIncluded: M930 (satin nickel), EA93 (satin nickel), A93 two-part POM adapter, wooden case\u003c\/li\u003e\n    \u003cli\u003ePower: 48V phantom\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eAcoustic operating principle: condenser, transformerless\u003c\/li\u003e\n    \u003cli\u003ePolar pattern: cardioid\u003c\/li\u003e\n    \u003cli\u003eCapsule: M9, 28 mm, gold-sputtered polymer membrane\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 40 Hz – 18 kHz\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 21 mV\/Pa (-33.5 dBV re. 1V\/Pa)\u003c\/li\u003e\n    \u003cli\u003eSelf-noise: 7 dBA (IEC 651); S\/N: 87 dB (A)\u003c\/li\u003e\n    \u003cli\u003eMaximum SPL: 142 dB at THD below 0.5%\u003c\/li\u003e\n    \u003cli\u003eMaximum output level: +17 dBu\u003c\/li\u003e\n    \u003cli\u003eOutput impedance: 100 ohms\u003c\/li\u003e\n    \u003cli\u003eRecommended load impedance: 1,000 ohms minimum\u003c\/li\u003e\n    \u003cli\u003ePower: 48V phantom (IEC 268-15)\u003c\/li\u003e\n    \u003cli\u003eCurrent draw: approximately 3 mA\u003c\/li\u003e\n    \u003cli\u003eBody dimensions: 120 mm (L) x 45 mm (diameter)\u003c\/li\u003e\n    \u003cli\u003eWeight: 210 g\u003c\/li\u003e\n    \u003cli\u003eFinish: satin nickel (alternative: dark bronze)\u003c\/li\u003e\n    \u003cli\u003eEA93: elastic suspension satin nickel for M930\/M940\/M950\/M960\/M930Ts\/UMT70S\/MT71S\u003c\/li\u003e\n    \u003cli\u003eA93 adapter: two-part POM, satin nickel\u003c\/li\u003e\n    \u003cli\u003eIncluded: microphone, EA93, A93, wooden case\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Microtech Gefell","offers":[{"title":"Default Title","offer_id":53745384489297,"sku":"58968","price":1379.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/GefellM930satinnickel_withelasticsuspensionEA93satinandadaptorA93satin_POM_two-parts_1.jpg?v=1778576566"},{"product_id":"gefell-mt71s-black-matt","title":"Gefell MT71S black matt","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eMicrotech Gefell MT 71S Black Matt\u003c\/strong\u003e is an active large-diaphragm condenser microphone with a switchable polar pattern, built around Georg Neumann's original M7 capsule with a PVC membrane — in a black matt finish that visually distinguishes it from the satin nickel and dark bronze variants. In terms of electronics, capsule, and technical parameters, the MT 71S Black Matt is identical to the other finish variants: M7 capsule with PVC membrane (the same technology as the Neumann U47, U48, M49), transformerless discrete FET amplifier, a three-position polar pattern switch (cardioid, figure-eight, omnidirectional) on the rear of the housing, sensitivity of 22 mV\/Pa, self-noise of 12 dBA, and maximum SPL of 140 dB. Hand-built in Gefell, Germany. The black matt finish is intended for users who prefer a discreet, non-reflective aesthetic in studio and broadcast environments.\u003c\/p\u003e\n\n  \u003ch3\u003eM7 capsule and three patterns — flexibility in a single instrument\u003c\/h3\u003e\n  \u003cp\u003eThe PVC membrane of the M7 capsule is technically demanding to manufacture and delivers the historically proven openness, natural high-frequency character, and three-dimensional spatial quality that defined the classic Neumann microphone sound for decades. The MT 71S is a direct extension of the UMT 70S — the same M7 capsule, the same FET electronics, the same steel mesh body with the historical Gefell aesthetic, with the addition of a three-position polar pattern switch. Cardioid: close vocals, solo instruments, rejection of surroundings. Figure-eight: M\/S recording as the Mid or Side element, stereo dialogue dubbing, bidirectional interview work, Blumlein stereo. Omni: ambient, choral, and orchestral recording with natural room acoustics. The transformerless FET output delivers low self-noise while preserving the M7 capsule's character without requiring a dedicated tube power supply — direct operation from 48V phantom. Compatible with the Rycote INV 7HG MK III suspension and the P110 INV 7 pop screen, identically to the satin nickel and dark bronze variants.\u003c\/p\u003e\n\n  \u003ch3\u003eBlack matt — finish and stereo pair availability\u003c\/h3\u003e\n  \u003cp\u003eThe black matt finish is a matte black powder coating on the steel body — visually neutral and discreet in broadcast and studio environments where traditional chromed or nickel-finished microphones may distract or reflect light. The MT 71S Black Matt is available in factory-matched stereo pairs for ORTF, X-Y, and Blumlein configurations with guaranteed per-unit matching. Applications: studio vocals, acoustic instruments, piano, classical guitar, chamber recording, broadcasting, and sessions requiring quick polar pattern switching between sources. Lifetime warranty to the original owner. Includes microphone, MH 93.1 clip, and wooden case.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eActive large-diaphragm condenser microphone with M7 capsule and 3 switchable polar patterns — black matt finish\u003c\/li\u003e\n    \u003cli\u003eM7 capsule: single-sided gold-sputtered PVC membrane — same technology as U47, U48, M49\u003c\/li\u003e\n    \u003cli\u003ePattern switch: cardioid \/ figure-eight \/ omni (rear of housing)\u003c\/li\u003e\n    \u003cli\u003eTransformerless discrete FET amplifier — low noise, 48V phantom operation\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 22 mV\/Pa\u003c\/li\u003e\n    \u003cli\u003eSelf-noise: 12 dBA\u003c\/li\u003e\n    \u003cli\u003eMaximum SPL: 140 dB at THD below 0.5%\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 40 Hz – 18 kHz\u003c\/li\u003e\n    \u003cli\u003eCylindrical steel body with steel mesh grille — historical Gefell aesthetic\u003c\/li\u003e\n    \u003cli\u003eCompatible with Rycote INV 7HG MK III and P110 INV 7 pop screen\u003c\/li\u003e\n    \u003cli\u003eAvailable in factory-matched stereo pairs\u003c\/li\u003e\n    \u003cli\u003eFinish: black matt (alternatives: satin nickel, dark bronze)\u003c\/li\u003e\n    \u003cli\u003eHand-built and individually measured in Germany\u003c\/li\u003e\n    \u003cli\u003eIncluded: microphone, MH 93.1 clip, wooden case\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eAcoustic operating principle: condenser, transformerless, FET\u003c\/li\u003e\n    \u003cli\u003ePolar patterns: cardioid \/ figure-eight \/ omni (rear panel switch)\u003c\/li\u003e\n    \u003cli\u003eCapsule: M7, single-sided gold-sputtered PVC membrane\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 40 Hz – 18 kHz\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 22 mV\/Pa (-33 dB re. 1V\/Pa)\u003c\/li\u003e\n    \u003cli\u003eSelf-noise: 12 dBA (IEC 651)\u003c\/li\u003e\n    \u003cli\u003eMaximum SPL: 140 dB at THD below 0.5%\u003c\/li\u003e\n    \u003cli\u003eOutput impedance: 50 ohms\u003c\/li\u003e\n    \u003cli\u003eRecommended load impedance: 1,000 ohms minimum\u003c\/li\u003e\n    \u003cli\u003ePower: 48V phantom (IEC 268-15)\u003c\/li\u003e\n    \u003cli\u003eDimensions: approximately 160 mm (L) x 50 mm (diameter)\u003c\/li\u003e\n    \u003cli\u003eWeight: approximately 330 g\u003c\/li\u003e\n    \u003cli\u003eFinish: black matt\u003c\/li\u003e\n    \u003cli\u003eIncluded: MT 71S microphone, MH 93.1 clip, wooden case\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Microtech Gefell","offers":[{"title":"Default Title","offer_id":53757662560593,"sku":"58964","price":1386.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/GefellMT71Sblackmatt.jpg?v=1778757798"},{"product_id":"gefell-m930-dark-bronze-with-microphone-holder-mh93-1","title":"Gefell M930 dark bronze (with microphone holder MH93.1)","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eMicrotech Gefell M930 Dark Bronze\u003c\/strong\u003e (with microphone holder MH 93.1) is a compact large-diaphragm cardioid condenser microphone with the M9 capsule (28 mm, gold-sputtered polymer membrane), transformerless output, and an optical capsule polarization circuit — in dark bronze finish with the standard MH 93.1 clip holder directly on the microphone body, without an external elastic suspension. The configuration is electronically and sonically identical to the satin nickel variant (order no. 211150) — the dark bronze finish (order no. 211151) is exclusively an aesthetic choice, matching the microphone to other Gefell accessories in this color (EA93 dark bronze, EH93P dark bronze). Self-noise is 7 dBA, maximum SPL is 142 dB, sensitivity is 21 mV\/Pa. Musikmesse International Press Award 2012. Hand-produced and individually measured in Germany.\u003c\/p\u003e\n\n  \u003ch3\u003eOptical polarization circuit and internal capsule isolation\u003c\/h3\u003e\n  \u003cp\u003eAn LED powered from the phantom supply illuminates a photocell, which delivers decoupled high-voltage capsule bias without noise coupling from the phantom power rail — responsible for the 142 dB SPL ceiling at a self-noise floor of 7 dBA (4 dB higher maximum SPL than the Neumann TLM103 at identical self-noise). Both the capsule and electronics are internally elastically suspended within the housing, providing baseline isolation from mechanically transmitted vibrations without an external spider mount. The MH 93.1 is a standard screw-collar clip that attaches to the microphone body at the XLR connector — solid, simple mounting with no additional vibration isolation. Sound On Sound (Hugh Robjohns) recommends the EA93 elastic suspension for critical applications where stand-borne vibration is a concern. Frequency response: flat with a 2.5–4 dB presence rise from 7 to 11 kHz and a gentle low-frequency roll-off below approximately 100 Hz.\u003c\/p\u003e\n\n  \u003ch3\u003eDark bronze — finish and accessory ecosystem\u003c\/h3\u003e\n  \u003cp\u003eThe dark bronze finish is available across the full Gefell accessory line for the M930\/M940\/M950 series: EA93 elastic suspension in dark bronze (order no. 212312), EH93P rubber vibration isolator in dark bronze, and MH 93.1 clip in dark bronze. The M930 dark bronze + MH 93.1 configuration (order no. 211151) is the recommended entry point for users who prefer the dark bronze aesthetic or work in environments with low structural vibration. An upgrade to the EA93 dark bronze or EH93P dark bronze is available at any time without modification to the microphone. Applications: studio and broadcast vocals, orchestral recording as a spot microphone or ORTF\/X-Y stereo pair, strings, woodwinds, piano, acoustic guitar, drum overheads, voice-over. Available in factory-matched stereo pairs.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eCompact large-diaphragm cardioid condenser — 120 x 45 mm, 210 g\u003c\/li\u003e\n    \u003cli\u003eM9 capsule: 28 mm, gold-sputtered polymer membrane — designed and built exclusively by Gefell\u003c\/li\u003e\n    \u003cli\u003eLED\/photocell capsule polarization circuit — decoupled high-voltage bias from phantom power\u003c\/li\u003e\n    \u003cli\u003eSelf-noise: 7 dBA (IEC 651); S\/N: 87 dB (A-weighted)\u003c\/li\u003e\n    \u003cli\u003eMaximum SPL: 142 dB at THD below 0.5% — 4 dB higher than Neumann TLM103\u003c\/li\u003e\n    \u003cli\u003eTransformerless discrete output; maximum output level +17 dBu\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 21 mV\/Pa\u003c\/li\u003e\n    \u003cli\u003eFlat response with 2.5–4 dB presence rise from 7 to 11 kHz\u003c\/li\u003e\n    \u003cli\u003eRear rejection above 25 dB\u003c\/li\u003e\n    \u003cli\u003eInternal elastic mounting of capsule and electronics\u003c\/li\u003e\n    \u003cli\u003eVery low RFI susceptibility\u003c\/li\u003e\n    \u003cli\u003eMH 93.1 clip: standard holder without vibration isolation — suitable for low-vibration environments\u003c\/li\u003e\n    \u003cli\u003eUpgrade option: EA93 dark bronze elastic suspension (order no. 212312) or EH93P dark bronze\u003c\/li\u003e\n    \u003cli\u003eMusikmesse International Press Award 2012\u003c\/li\u003e\n    \u003cli\u003eFinish: dark bronze; order no. 211151\u003c\/li\u003e\n    \u003cli\u003eIncluded: M930 (dark bronze), MH 93.1 clip, wooden case\u003c\/li\u003e\n    \u003cli\u003ePower: 48V phantom\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eAcoustic operating principle: condenser, transformerless\u003c\/li\u003e\n    \u003cli\u003ePolar pattern: cardioid\u003c\/li\u003e\n    \u003cli\u003eCapsule: M9, 28 mm, gold-sputtered polymer membrane\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 40 Hz – 18 kHz\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 21 mV\/Pa (-33.5 dBV re. 1V\/Pa)\u003c\/li\u003e\n    \u003cli\u003eSelf-noise: 7 dBA (IEC 651); S\/N: 87 dB (A)\u003c\/li\u003e\n    \u003cli\u003eMaximum SPL: 142 dB at THD below 0.5%\u003c\/li\u003e\n    \u003cli\u003eMaximum output level: +17 dBu\u003c\/li\u003e\n    \u003cli\u003eOutput impedance: 100 ohms\u003c\/li\u003e\n    \u003cli\u003eRecommended load impedance: 1,000 ohms minimum\u003c\/li\u003e\n    \u003cli\u003ePower: 48V phantom (IEC 268-15)\u003c\/li\u003e\n    \u003cli\u003eCurrent draw: approximately 3 mA\u003c\/li\u003e\n    \u003cli\u003eBody dimensions: 120 mm (L) x 45 mm (diameter)\u003c\/li\u003e\n    \u003cli\u003eWeight: 210 g\u003c\/li\u003e\n    \u003cli\u003eFinish: dark bronze; order no. 211151\u003c\/li\u003e\n    \u003cli\u003eHolder: MH 93.1 (standard clip)\u003c\/li\u003e\n    \u003cli\u003eIncluded: microphone, MH 93.1, wooden case\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Microtech Gefell","offers":[{"title":"Default Title","offer_id":53757734453585,"sku":"58969","price":1175.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/GefellM930darkbronze_withmicrophoneholderMH93.1_1.jpg?v=1778757788"}],"url":"https:\/\/wrdtunes.com\/fr-fr\/collections\/microtech-gefell.oembed","provider":"Wired Tunes","version":"1.0","type":"link"}