{"product_id":"lewitt-lct-1040","title":"LEWITT LCT 1040","description":"\u003cdiv lang=\"en\"\u003e\n\n  \u003cp\u003e\u003cstrong\u003eLEWITT LCT 1040\u003c\/strong\u003e is LEWITT's flagship microphone system: a large-diaphragm condenser \u003ca href=\"https:\/\/wrdtunes.com\/collections\/microphones\"\u003emicrophone\u003c\/a\u003e with an E88CC\/6DJ8 tube and a parallel FET circuit, four all-analog tube characteristics, seamlessly blendable polar patterns, and a detachable remote controller. The system comprises the microphone, an external PSU, and a remote unit – every sonic parameter is accessible from the engineer's sweet spot without interrupting the session. Winner of the Sound on Sound 2023 Best Microphone award. 10-year manufacturer warranty.\u003c\/p\u003e\n\n  \u003ch3\u003eFour Tube Characters + FET – a Tonal Palette in One Microphone\u003c\/h3\u003e\n  \u003cp\u003eThe heart of the LCT 1040 is an E88CC\/6DJ8 tube operating in four distinct analog modes: Clear (tube at technical optimum – warm and transparent), Warm (smooth, pleasant high-end), Dark (tamed highs for bright sources or vocalists), and Saturated (rich harmonics with subtle compression). Each characteristic is a physically different tube bias point – not digital processing, not simulation. The Circuit knob on the remote smoothly blends the FET circuit into the tube signal at any ratio. The Mix output delivers the set blend; the FET output delivers 100% pure FET independently of the Circuit control, enabling simultaneous recording of both paths and deferring the blend decision to post-production. Self-noise: 10 dB(A) FET, 13 dB(A) tube; maximum SPL 137 dBSPL (FET at 0 dB pad) and an incomprehensible 161 dBSPL with the –24 dB pad engaged.\u003c\/p\u003e\n\n  \u003ch3\u003eRemote Controller and Large-Studio Workflow\u003c\/h3\u003e\n  \u003cp\u003eThe remote undocks from the PSU and connects to it via a standard 3-pin XLR cable. With the microphone placed in the live room, the engineer has full control over tube character, FET\/Tube blend, polar pattern, PAD, and low-cut filter from the console position – without entering the booth or interrupting the take. The polar pattern transitions seamlessly between omni and figure-8 with no switching noise. The Default\/Reverse flip switch changes which side of the microphone is acoustically active without physically rotating the mic on the stand. The carbon fiber shockmount allows 360° rotation of the microphone and features quick-release mechanisms for both the microphone and the angle adjustment. Two Neutrik XLR outputs: Mix and FET. The 10-pin Hirose 5 m system cable is included.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eE88CC\/6DJ8 tube – 4 all-analog characteristics: Clear, Warm, Dark, Saturated\u003c\/li\u003e\n    \u003cli\u003eContinuous FET\/Tube blend via Circuit control\u003c\/li\u003e\n    \u003cli\u003eTwo Neutrik XLR outputs: Mix (FET+tube blend) and FET (100% pure FET)\u003c\/li\u003e\n    \u003cli\u003eSeamless polar pattern: omni \/ wide cardioid \/ cardioid \/ supercardioid \/ figure-8\u003c\/li\u003e\n    \u003cli\u003eDefault\/Reverse flip switch – changes active front without repositioning the microphone\u003c\/li\u003e\n    \u003cli\u003eDetachable remote controller – full parameter control from the engineer's sweet spot via 3-pin XLR\u003c\/li\u003e\n    \u003cli\u003ePAD: –6 \/ –12 \/ –24 dB (maximum SPL with –24 dB pad: 161 dBSPL)\u003c\/li\u003e\n    \u003cli\u003eLow-cut filter: linear \/ 40 Hz (12 dB\/oct) \/ 80 Hz (12 dB\/oct) \/ 120 Hz (6 dB\/oct)\u003c\/li\u003e\n    \u003cli\u003eCarbon fiber shockmount – 360° rotation, quick-release for mic and angle adjustment\u003c\/li\u003e\n    \u003cli\u003eDual-layer magnetic pop filter integrated with the shockmount\u003c\/li\u003e\n    \u003cli\u003e10-year manufacturer warranty\u003c\/li\u003e\n    \u003cli\u003eIncludes: shockmount, pop filter, windscreen, 10-pin 5 m cable, mic mount, mil-spec transport case\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eTransducer type: condenser, externally polarized\u003c\/li\u003e\n    \u003cli\u003eTube: E88CC \/ 6DJ8 (JJ Electronics)\u003c\/li\u003e\n    \u003cli\u003ePolar patterns: omni \/ wide cardioid \/ cardioid \/ supercardioid \/ figure-8 (seamless blend)\u003c\/li\u003e\n    \u003cli\u003eFrequency range: 20 Hz – 20,000 Hz\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 17.2 mV\/Pa (–35.3 dBV\/Pa) cardioid\u003c\/li\u003e\n    \u003cli\u003eSelf-noise: 10 dB(A) FET \/ 13 dB(A) tube (cardioid)\u003c\/li\u003e\n    \u003cli\u003eMaximum SPL (0.5% THD): 137 dBSPL (FET, 0 dB pad) \/ 161 dBSPL (with –24 dB pad)\u003c\/li\u003e\n    \u003cli\u003eSignal-to-noise ratio: 84 dB(A) FET \/ 81 dB(A) tube\u003c\/li\u003e\n    \u003cli\u003eDynamic range: 126.7 dB(A) FET\u003c\/li\u003e\n    \u003cli\u003eOutput impedance: 83.8 Ω\u003c\/li\u003e\n    \u003cli\u003eAttenuation pad: 0 \/ –6 \/ –12 \/ –24 dB\u003c\/li\u003e\n    \u003cli\u003eLow-cut filter: linear \/ 40 Hz (12 dB\/oct) \/ 80 Hz (12 dB\/oct) \/ 120 Hz (6 dB\/oct)\u003c\/li\u003e\n    \u003cli\u003eMic-to-PSU connector: 10-pin Hirose (5 m cable included)\u003c\/li\u003e\n    \u003cli\u003eAudio outputs: 2 × Neutrik XLR (Mix + FET)\u003c\/li\u003e\n    \u003cli\u003eMicrophone enclosure: zinc die cast\u003c\/li\u003e\n    \u003cli\u003eMicrophone dimensions: 196 × 65 × 45 mm (7.7\" × 2.6\" × 1.8\")\u003c\/li\u003e\n    \u003cli\u003eMicrophone weight: 652 g (23 oz)\u003c\/li\u003e\n    \u003cli\u003ePSU dimensions: 240 × 170 × 47 mm\u003c\/li\u003e\n    \u003cli\u003ePSU weight: 2,381 g\u003c\/li\u003e\n    \u003cli\u003eRemote dimensions: 240 × 163 × 52 mm\u003c\/li\u003e\n    \u003cli\u003eRemote weight: 1,952 g\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"LEWITT","offers":[{"title":"Default Title","offer_id":53446341329233,"sku":"59312","price":3136.62,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/LEWITTLCT1040CBL51_d7829ca5-e1cf-45b3-a667-e4aa802879fe.jpg?v=1775468916","url":"https:\/\/wrdtunes.com\/en-fr\/products\/lewitt-lct-1040","provider":"Wired Tunes","version":"1.0","type":"link"}