{"title":"Wunder Audio","description":"","products":[{"product_id":"wunder-audio-cm49-jfet-s","title":"Wunder Audio CM49 JFET S","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eWunder Audio CM49 JFET S\u003c\/strong\u003e – a large-diaphragm condenser microphone featuring a unique low-noise profile JFET transistor with tube sound characteristics, optimized for ultra-low noise at both high and low frequencies with exceptional detail and focus. Built as a modern tribute to the legendary Neumann M49, the CM49 JFET S delivers incredibly rich audiophile accuracy and a round tone with smoother clarity throughout the frequency range.\u003c\/p\u003e\n\n\u003cp\u003eThe CM49 JFET S combines vintage aesthetics with state-of-the-art electronics. Its distinctive slanted grille design minimizes resonance by presenting a continuously varying profile to the capsule, reducing standing waves for the most natural sound obtainable in any microphone. The larger grille volume provides the capsule with enhanced breathing room, contributing to its remarkable openness and warmth. Equipped with the same Historic Berlin M7 capsule as the CM7 Suprema, yet housed in a completely different enclosure with triode electronics, this microphone offers a unique sonic signature that excels particularly on vocals.\u003c\/p\u003e\n\n\u003cp\u003eUtilizing large-scale integrated circuit technology, the CM49 JFET S achieves high transconductance, ultra-low noise, and minimal gate-to-drain capacitance. Combined with Ion Implant technology optimized for low noise, this creates a state-of-the-art instrument. Wunder Audio has enhanced their vintage-inspired design with the highest quality capacitors available today, achieving true audiophile performance where the spectrum opens up, adding emphasis to sound staging and creating a greater sense of air and transparency. The result is a less grainy, more fluid sound with tighter, sharper focus. Recordings fit beautifully into the mix even without EQ. While not originally designed for close-miking, the CM49 JFET S really shines when placed close to loud sources, creating a highly desirable proximity effect.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLarge-diaphragm condenser with Historic Berlin M7 capsule\u003c\/li\u003e\n\u003cli\u003eUnique low-noise profile JFET transistor with tube sound characteristics\u003c\/li\u003e\n\u003cli\u003eOptimized for zero noise at high and low frequencies\u003c\/li\u003e\n\u003cli\u003eTrue to vintage Neumann M49 design philosophy\u003c\/li\u003e\n\u003cli\u003eSlanted grille minimizes resonance and standing waves\u003c\/li\u003e\n\u003cli\u003eEnhanced grille volume for increased capsule breathing room\u003c\/li\u003e\n\u003cli\u003eHigh transconductance with low gate-to-drain capacitance\u003c\/li\u003e\n\u003cli\u003eIon Implant technology for state-of-the-art low noise performance\u003c\/li\u003e\n\u003cli\u003eAudiophile-grade passive components and capacitors\u003c\/li\u003e\n\u003cli\u003eIncredibly rich accuracy with round, smooth tone\u003c\/li\u003e\n\u003cli\u003eEnhanced air, transparency, and sound staging\u003c\/li\u003e\n\u003cli\u003eExceptional for vocals, particularly effective on loud sources\u003c\/li\u003e\n\u003cli\u003eCreates desirable proximity effect when close-miked\u003c\/li\u003e\n\u003cli\u003eNatural, pure, and pleasantly warm sonic character\u003c\/li\u003e\n\u003cli\u003eVintage-authentic grille compatible with original M49 parts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: Large-diaphragm condenser microphone\u003c\/li\u003e\n\u003cli\u003eCapsule: Historic Berlin M7 capsule (same as CM7 Suprema)\u003c\/li\u003e\n\u003cli\u003eElectronics: Low-noise JFET transistor circuit\u003c\/li\u003e\n\u003cli\u003ePolar Pattern: Cardioid (fixed)\u003c\/li\u003e\n\u003cli\u003eTechnology: Large-scale integrated circuit with Ion Implant optimization\u003c\/li\u003e\n\u003cli\u003eFrequency Response: Optimized for low noise at high and low frequencies\u003c\/li\u003e\n\u003cli\u003eSelf-Noise: Zero noise characteristics\u003c\/li\u003e\n\u003cli\u003eComponents: Audiophile-grade capacitors and passive components\u003c\/li\u003e\n\u003cli\u003eGrille: Slanted design, vintage-authentic construction\u003c\/li\u003e\n\u003cli\u003eHousing: Vintage M49-style body with triode electronics\u003c\/li\u003e\n\u003cli\u003eIncluded: CM49 JFET S microphone, plush oak box, yoke mount, CM7 S capsule\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":46829857276241,"sku":"41724","price":3357.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WUNDERAUDIOCM49JFETS.jpg?v=1761830968"},{"product_id":"wunder-audio-cm49-s","title":"Wunder Audio CM49 S","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eWunder Audio CM49 S\u003c\/strong\u003e is a large-diaphragm tube condenser microphone with continuously variable polar patterns (omni, cardioid, figure-eight) controlled from the power supply. Built on a pressure-gradient principle with two identical cardioid capsule systems mounted back-to-back, it delivers a natural, rounded tone and adapts easily to different acoustic environments.\u003c\/p\u003e\n\u003cp\u003eThe slanted, large-volume grille reduces standing waves and resonances while giving the capsule more breathing room for an open, warm sound with immediate vocal presence. A selected NOS Telefunken tube drives the triode electronics, and the passive stage is optimized for audiophile purity using a Suprema Silver Gold Oil capacitor noted for exceptional micro-dynamics and spacious imaging.\u003c\/p\u003e\n\u003cp\u003eThe CM49 S uses a screw-locking seven-pin Tuchel connector for superior EMI\/RF rejection. The new-generation PSU provides clean DC, worldwide mains capability, and precise voltage trimming via multi-turn trimmers; a military-spec Grayhill switch handles pattern selection. Included are the M7 capsule, oak storage box, historical yoke mount, power supply, original Tuchel mic cable, and a velvet-lined tweed carrying case.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eContinuously variable patterns: omni, cardioid, figure-eight (remote from PSU)\u003c\/li\u003e\n\u003cli\u003ePressure-gradient design: dual back-to-back cardioid capsules\u003c\/li\u003e\n\u003cli\u003eSlanted, large-volume grille: fewer standing waves, more openness\u003c\/li\u003e\n\u003cli\u003eNOS Telefunken tube for rich, musical saturation and natural dynamics\u003c\/li\u003e\n\u003cli\u003eSuprema Silver Gold Oil capacitor: high clarity, micro-detail, deep soundstage\u003c\/li\u003e\n\u003cli\u003eSeven-pin screw-on Tuchel connector for superior EMI\/RF rejection\u003c\/li\u003e\n\u003cli\u003eNext-gen PSU: clean DC, global voltage support, 30-turn trim pots, Grayhill switch\u003c\/li\u003e\n\u003cli\u003eVocal immediacy and warmth; ideal for demanding studio applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: tube condenser microphone, large diaphragm\u003c\/li\u003e\n\u003cli\u003eOperating principle: pressure-gradient, dual back-to-back cardioid capsules\u003c\/li\u003e\n\u003cli\u003ePolar patterns: omni \/ cardioid \/ figure-eight, continuously variable via PSU\u003c\/li\u003e\n\u003cli\u003eCapsule: M7 (included as standard)\u003c\/li\u003e\n\u003cli\u003ePassive components: Suprema Silver Gold Oil capacitor\u003c\/li\u003e\n\u003cli\u003eConnector: 7-pin screw-on Tuchel\u003c\/li\u003e\n\u003cli\u003ePower supply: stabilized DC, worldwide mains, multi-turn trimmers\u003c\/li\u003e\n\u003cli\u003eIncluded: microphone, oak box, yoke mount, PSU, Tuchel cable, tweed carrying case\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":46829857440081,"sku":"29036","price":6805.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WUNDERAUDIOCM49S.jpg?v=1761833801"},{"product_id":"wunder-audio-cm50-fet-s","title":"Wunder Audio CM50 FET S","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eWunder Audio CM50 FET S\u003c\/strong\u003e – a professional solid-state condenser microphone featuring an original Neumann M50-style spherical capsule. Incorporates an audiophile-grade MOSFET circuit delivering exceptionally low noise, superior detail retrieval, and linear characteristics across the entire dynamic range. This model is the direct successor to the CM50 FET used for recording soundtracks for the world's biggest motion pictures.\u003c\/p\u003e\n\u003cp\u003eThe CM50 FET Suprema features an M9 spherical capsule mounted in a 40 mm Lucite sphere, which eliminates standing waves larger than 40 mm and completely cancels the proximity effect. This results in an exceptionally natural omnidirectional character – no other microphone set to omni can achieve the naturalness of the CM50 S sound. The slanted grille with its unique profile minimizes resonances and standing waves, delivering pure, warm, and remarkably open sound. The MOSFET circuit provides a sense of purity on vocals and strings thought to be impossible in transistor amplification, while maintaining tonal consistency and clarity across varying signal levels.\u003c\/p\u003e\n\u003cp\u003eThis microphone has been used in Decca Tree configurations by scoring engineers such as Shawn Murphy and Tom Steel at the most prestigious sound stages in Los Angeles and Abbey Road. It has been featured on recordings for films including Star Wars: The Force Awakens, The Hobbit series, Harry Potter, and Marvel productions. Beyond orchestral applications, the CM50 FET S excels at recording drums and capturing room sound, giving instruments volume and depth. The microphone is delivered in an elegant foam-lined solid oak box with a reinforced one-piece yoke mount.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSolid-state condenser microphone with audiophile-grade MOSFET circuitry\u003c\/li\u003e\n\u003cli\u003eM9 spherical capsule in Neumann M50 style with Mylar diaphragm\u003c\/li\u003e\n\u003cli\u003eMiniature pressure transducer embedded in 40 mm Lucite sphere\u003c\/li\u003e\n\u003cli\u003eEliminates proximity effect and standing waves larger than 40 mm\u003c\/li\u003e\n\u003cli\u003eSlanted grille design minimizing resonances\u003c\/li\u003e\n\u003cli\u003eExceptionally low noise floor and outstanding detail retrieval\u003c\/li\u003e\n\u003cli\u003eLinear characteristics across entire dynamic range\u003c\/li\u003e\n\u003cli\u003eRising response and increased directionality at higher frequencies for direct sound\u003c\/li\u003e\n\u003cli\u003eFlat response in diffused sound field\u003c\/li\u003e\n\u003cli\u003eIdeal for orchestral recordings, drums, and space miking\u003c\/li\u003e\n\u003cli\u003eUsed in Hollywood's top-tier film productions\u003c\/li\u003e\n\u003cli\u003eOptimized passive components for audiophile performance\u003c\/li\u003e\n\u003cli\u003eSolid oak box with velvet lining\u003c\/li\u003e\n\u003cli\u003eReinforced one-piece yoke mount design\u003c\/li\u003e\n\u003cli\u003eUpgrade path available from previous Wunder Audio versions to Suprema standard\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: FET condenser microphone (solid-state)\u003c\/li\u003e\n\u003cli\u003eCapsule: M9 spherical in 40 mm Lucite sphere\u003c\/li\u003e\n\u003cli\u003ePolar Pattern: Omnidirectional\u003c\/li\u003e\n\u003cli\u003eDiaphragm Material: Mylar\u003c\/li\u003e\n\u003cli\u003eCapsule Diameter: 40 mm\u003c\/li\u003e\n\u003cli\u003eCircuitry: Audiophile-grade MOSFET circuit\u003c\/li\u003e\n\u003cli\u003eGrille: Slanted, vintage design identical to original M50\u003c\/li\u003e\n\u003cli\u003eYoke Mount: One-piece reinforced construction\u003c\/li\u003e\n\u003cli\u003ePackaging: Oak wooden box with foam lining and velvet\u003c\/li\u003e\n\u003cli\u003eApplications: Orchestral recordings, Decca Tree, drums, room miking\u003c\/li\u003e\n\u003cli\u003ePackage Includes: CM50 FET S, exclusive oak box, yoke mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":46829857538385,"sku":"29037","price":3950.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WUNDERAUDIOCM50FETS.jpg?v=1761832302"},{"product_id":"wunder-audio-cm50-s","title":"Wunder Audio CM50 S","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eWunder Audio CM50 Suprema\u003c\/strong\u003e – a professional large-diaphragm tube condenser microphone featuring an original Neumann-style M50 spherical capsule design. With an incredible lineage in Hollywood film scoring, the CM50 S has been used worldwide in Decca trees for recording soundtracks to major motion pictures including Star Wars: Episode VII – The Force Awakens, the Hobbit film series, Harry Potter, and Marvel films. Widely employed by legendary scoring engineers Shawn Murphy and Tom Steel at premier sound stages including Newman Scoring Stage at 20th Century Fox, Sony Scoring Stage, Abbey Road, and other top studios worldwide.\u003c\/p\u003e\n\n\u003cp\u003eThe CM50 Suprema represents the best available microphone for orchestral recordings, featuring a response that rises slightly and becomes increasingly directional at higher frequencies when exposed to direct sound, while remaining flat in a diffused sound field. Beyond soundtrack recording perfection, this microphone is essential for capturing room sound with drums, giving instruments tremendous volume and depth—recordings sound flat without it. The distinctive slanted grille limits resonance effects by presenting a continuously varying profile to the capsule, reducing standing waves for the most natural sound obtainable—very pure and pleasantly warm. The larger grille volume provides enhanced capsule breathing room, contributing to exceptional openness.\u003c\/p\u003e\n\n\u003cp\u003eThe CM50 Suprema features a small pressure transducer embedded in a 40mm diameter Lucite sphere—a cutting-edge recreation of the historic M9 capsule used in the original M50. By mounting the miniature capsule within the large Lucite sphere, all standing waves larger than 40mm are eliminated, completely canceling proximity effect. No other omnidirectional microphone can achieve the naturalness of the CM50 S sound. The original Telefunken MSC2 tube (military-grade NOS) provides superior performance over the AC701. Wunder Audio has enhanced their vintage-inspired design with Suprema Silver Gold Oil capacitors featuring 99.99% silver and 1% gold metallization, creating exceptional image depth with enhanced sound staging, air, and transparency. The vintage-authentic M250 style seven-pin Tuchel connector provides superior EMI\/RF rejection. The proprietary PSU features universal voltage compatibility and complete RF\/Wi-Fi interference shielding.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLarge-diaphragm tube condenser with spherical capsule design\u003c\/li\u003e\n\u003cli\u003eTrue to vintage Neumann M50 design with modern enhancements\u003c\/li\u003e\n\u003cli\u003eLegendary lineage: used on Star Wars, Hobbit, Harry Potter, Marvel film soundtracks\u003c\/li\u003e\n\u003cli\u003eEmployed by top Hollywood scoring engineers at premier sound stages worldwide\u003c\/li\u003e\n\u003cli\u003eBest available microphone for orchestral recordings\u003c\/li\u003e\n\u003cli\u003eRises slightly at higher frequencies with direct sound, flat in diffused field\u003c\/li\u003e\n\u003cli\u003eEssential for huge drum sounds and capturing room ambience\u003c\/li\u003e\n\u003cli\u003eSmall pressure transducer embedded in 40mm diameter Lucite sphere\u003c\/li\u003e\n\u003cli\u003eHistoric M9 capsule recreation with Mylar diaphragm\u003c\/li\u003e\n\u003cli\u003eEliminates all standing waves larger than 40mm\u003c\/li\u003e\n\u003cli\u003eCompletely cancels proximity effect\u003c\/li\u003e\n\u003cli\u003eUnmatched naturalness in omnidirectional mode\u003c\/li\u003e\n\u003cli\u003eSlanted grille design minimizes resonance and standing waves\u003c\/li\u003e\n\u003cli\u003eVintage-authentic grille (used as historical M50 replacement parts)\u003c\/li\u003e\n\u003cli\u003eLarger grille volume for enhanced capsule breathing room\u003c\/li\u003e\n\u003cli\u003eOriginal Telefunken MSC2 tube (military-grade NOS)\u003c\/li\u003e\n\u003cli\u003eUpgrade from ultra-miniature AC701 tube\u003c\/li\u003e\n\u003cli\u003eSuprema Silver Gold Oil capacitors (99.99% silver, 1% gold)\u003c\/li\u003e\n\u003cli\u003eEnhanced image depth, sound staging, air, and transparency\u003c\/li\u003e\n\u003cli\u003eM250 style seven-pin Tuchel connector with superior EMI\/RF rejection\u003c\/li\u003e\n\u003cli\u003eProprietary PSU with universal voltage compatibility\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: Large-diaphragm tube condenser microphone with spherical capsule\u003c\/li\u003e\n\u003cli\u003eCapsule: M9 capsule (historic M50 design)\u003c\/li\u003e\n\u003cli\u003eCapsule Configuration: Small pressure transducer in 40mm diameter Lucite sphere\u003c\/li\u003e\n\u003cli\u003eDiaphragm Material: Mylar\u003c\/li\u003e\n\u003cli\u003ePolar Pattern: Omnidirectional (optimized)\u003c\/li\u003e\n\u003cli\u003eFrequency Response: Rises slightly at higher frequencies with direct sound, flat in diffused field\u003c\/li\u003e\n\u003cli\u003eProximity Effect: Eliminated by spherical capsule design\u003c\/li\u003e\n\u003cli\u003eTube: Original Telefunken MSC2 (military-grade NOS)\u003c\/li\u003e\n\u003cli\u003eGrille: Slanted design, vintage-authentic (compatible with original M50)\u003c\/li\u003e\n\u003cli\u003eConnector: M250 style seven-pin Tuchel (introduced 1961)\u003c\/li\u003e\n\u003cli\u003eConnector Feature: Screw-on design with superior EMI\/RF rejection\u003c\/li\u003e\n\u003cli\u003eCapacitor: Suprema Silver Gold Oil, 1uF capacitance\u003c\/li\u003e\n\u003cli\u003eCapacitor Metallization: 99.99% silver, 1% gold\u003c\/li\u003e\n\u003cli\u003eCapacitor Purity: Silver min. 99.97% typ. 99.99%; Gold min. 99.97% typ. 99.99%\u003c\/li\u003e\n\u003cli\u003eDielectric: Polypropylene\u003c\/li\u003e\n\u003cli\u003ePower Supply: Proprietary Wunder Audio PSU, dual-pole neutral-fusing\u003c\/li\u003e\n\u003cli\u003ePSU Features: Universal voltage, 30-turn trim pots, RF\/Wi-Fi shielding\u003c\/li\u003e\n\u003cli\u003eMount: One-piece newly designed yoke mount\u003c\/li\u003e\n\u003cli\u003eCase: Foam-lined quarter sawn oak box in velvet-lined tweed case\u003c\/li\u003e\n\u003cli\u003eIncluded: CM50 S microphone, spherical capsule, plush oak box, power supply, yoke mount, cables, Fender tweed carrying case with leather trim and combination lock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":46829858980177,"sku":"29038","price":7682.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WUNDERAUDIOCM50S.jpg?v=1761831767"},{"product_id":"wunder-audio-cm67-s","title":"Wunder Audio CM67 S","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eWunder Audio CM67 Suprema\u003c\/strong\u003e – a professional large-diaphragm multi-pattern tube condenser microphone representing a modern evolution of the legendary Neumann U67 design. Prized for exceptional warmth and smoothness, the CM67 S combines authentic vintage sound with modern enhancements, featuring a switchable cardioid mode relay engineered inside the mic capsule compartment plus eight different polar patterns, making it like having two microphones in one.\u003c\/p\u003e\n\n\u003cp\u003eThe CM67 S delivers a warm and silky sound characteristic of the original U67, making it exceptional for vocals when a smoother sound is desired. This serious pro-studio workhorse excels across multiple applications including drums (toms, snare, overheads), acoustic guitar, and electric guitar, featuring very nice top and bottom end that brings out natural sound from any source. The innovative switchable cardioid mode produces a smoother, more full-bodied sound, with the pattern switch located on the PSU but the actual switch point positioned directly below the capsule compartment.\u003c\/p\u003e\n\n\u003cp\u003eThe CM67 S features a two-piece backplate K67 capsule allowing both diaphragms to be tuned individually and matched for equivalent response. Wunder Audio utilizes a white porcelain mounted ringed capsule—providing low permeability and elasticity, considerable strength, hardness, resonance, and high resistance to chemical attack and thermal shock, improving upon white plastic rings prone to discoloring and impurity absorption. Users can choose between two NOS EF86 tubes: vintage German Telefunken EF86 (emphasizes highs) or vintage special select Phillips tube (lends warmth). The transformer features an elaborate tertiary winding feedback network creating negative feedback through the capsule to the tube for high-frequency de-emphasis, compensating for the natural HF peak of the K67 capsule design—a very special transformer achieving impressive sound. Wunder Audio has enhanced their design with Suprema Silver Gold Oil capacitors featuring 99.99% silver and 1% gold metallization, creating exceptional image depth with enhanced sound staging, air, and transparency. The proprietary PSU features military-spec Grayhill switch, universal voltage compatibility, and complete RF\/Wi-Fi interference shielding.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLarge-diaphragm multi-pattern tube condenser microphone\u003c\/li\u003e\n\u003cli\u003eModern evolution of legendary Neumann U67 with exceptional warmth\u003c\/li\u003e\n\u003cli\u003eSwitchable cardioid mode relay inside capsule compartment for smoother, full-bodied sound\u003c\/li\u003e\n\u003cli\u003eEight different polar patterns plus hard-switched cardioid\u003c\/li\u003e\n\u003cli\u003eTwo microphones in one: vintage U67 character + multi-pattern versatility\u003c\/li\u003e\n\u003cli\u003eTwo-piece backplate K67 capsule with individually tuned and matched diaphragms\u003c\/li\u003e\n\u003cli\u003eWhite porcelain mounted ringed capsule (modern upgrade from plastic)\u003c\/li\u003e\n\u003cli\u003eSuperior strength, hardness, resonance, and chemical resistance\u003c\/li\u003e\n\u003cli\u003eEliminates issues of discoloration and impurity absorption\u003c\/li\u003e\n\u003cli\u003eChoice of two NOS EF86 tubes: Telefunken (emphasizes highs) or Phillips (warmth)\u003c\/li\u003e\n\u003cli\u003eUnique transformer with tertiary winding feedback network\u003c\/li\u003e\n\u003cli\u003eHigh-frequency de-emphasis to compensate for K67 capsule natural HF peak\u003c\/li\u003e\n\u003cli\u003eSmooth roll-off in HF response for balanced tonal character\u003c\/li\u003e\n\u003cli\u003eSuprema Silver Gold Oil capacitors (99.99% silver, 1% gold)\u003c\/li\u003e\n\u003cli\u003eEnhanced image depth, sound staging, air, and transparency\u003c\/li\u003e\n\u003cli\u003eLess grainy, more fluid sound with tighter focus\u003c\/li\u003e\n\u003cli\u003eProprietary PSU with military-spec Grayhill pattern switch\u003c\/li\u003e\n\u003cli\u003eUniversal voltage compatibility without jumper switch\u003c\/li\u003e\n\u003cli\u003e30-turn precision trim pots for voltage fine-tuning\u003c\/li\u003e\n\u003cli\u003eComplete RF and Wi-Fi interference shielding\u003c\/li\u003e\n\u003cli\u003eExceptional for vocals, drums, acoustic guitar, and electric guitar\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: Large-diaphragm multi-pattern tube condenser microphone\u003c\/li\u003e\n\u003cli\u003eCapsule: Two-piece backplate K67 capsule with white porcelain ring\u003c\/li\u003e\n\u003cli\u003eDiaphragm Configuration: Individually tuned and matched for equivalent response\u003c\/li\u003e\n\u003cli\u003eTube Options: Vintage Telefunken EF86 (German) or vintage special select Phillips EF86\u003c\/li\u003e\n\u003cli\u003ePolar Patterns: Eight switchable patterns plus hard-switched cardioid mode\u003c\/li\u003e\n\u003cli\u003eDirectional Characteristics: Omni, cardioid, figure-eight\u003c\/li\u003e\n\u003cli\u003eSensitivity: Cardioid (20 mV\/Pa; 20-18,000 Hz), Omnidirectional (11 mV\/Pa; 20-18,000 Hz)\u003c\/li\u003e\n\u003cli\u003eElectrical Impedance: 200 ohms\u003c\/li\u003e\n\u003cli\u003eMaximum SPL: 120 dB\u003c\/li\u003e\n\u003cli\u003ePattern Switching: Internal relay below capsule compartment\u003c\/li\u003e\n\u003cli\u003eTransformer: Vintage-authentic with tertiary winding feedback network\u003c\/li\u003e\n\u003cli\u003eTransformer Feature: Negative feedback through capsule to tube for HF de-emphasis\u003c\/li\u003e\n\u003cli\u003eCapacitor: Suprema Silver Gold Oil, 1uF capacitance\u003c\/li\u003e\n\u003cli\u003eCapacitor Metallization: 99.99% silver, 1% gold\u003c\/li\u003e\n\u003cli\u003eCapacitor Purity: Silver min. 99.97% typ. 99.99%; Gold min. 99.97% typ. 99.99%\u003c\/li\u003e\n\u003cli\u003eDielectric: Polypropylene\u003c\/li\u003e\n\u003cli\u003ePower Supply: Proprietary Wunder Audio PSU, dual-pole neutral-fusing\u003c\/li\u003e\n\u003cli\u003ePattern Switch: Military-spec Grayhill switch\u003c\/li\u003e\n\u003cli\u003ePSU Features: Universal voltage (115\/230 VAC), 30-turn trim pots, RF\/Wi-Fi shielding\u003c\/li\u003e\n\u003cli\u003eConnector: Large-sized Tuchel, 6 pin\u003c\/li\u003e\n\u003cli\u003eDimensions: 222 mm (8.75\") length \/ 63 mm (2.48\") diameter\u003c\/li\u003e\n\u003cli\u003eWeight: Approximately 12 lbs (shipping weight)\u003c\/li\u003e\n\u003cli\u003eCase: Foam-lined quarter sawn oak box in velvet-lined tweed case\u003c\/li\u003e\n\u003cli\u003eIncluded: CM67 S microphone, K67 capsule, choice of vintage Telefunken EF86 or Phillips tube, plush oak box, power supply, shock mount, Tuchel cable, Fender tweed carrying case with leather trim and combination lock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":46829859144017,"sku":"29039","price":4099.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WUNDERAUDIOCM67S.jpg?v=1761831536"},{"product_id":"wunder-audio-cm7-fet-s","title":"Wunder Audio CM7 FET S","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eWunder Audio CM7 FET Suprema\u003c\/strong\u003e – a professional large-diaphragm phantom-powered condenser microphone representing a modern evolution of the classic U47 FET design. Built to bypass the need for a tube power supply while delivering exceptional performance, the CM7 FET Suprema employs an ultra-low noise single n-channel transistor with JFET technology coupled with a Neve 1073 style mic pre-transformer, overcoming the limitations of 1960s FET transistor technology.\u003c\/p\u003e\n\n\u003cp\u003eThe CM7 FET Suprema delivers stunning results that greatly surpass the original U47 FET, yielding superior low-lows and highs with exceptional clarity and warmth reminiscent of a 1970s era U87. This workhorse studio microphone excels across all sources, particularly vocals, instruments, and a wide range of recording applications. The authentic three-layer grille design features outer large mesh, inner medium mesh, and fine mesh sandwiched between, creating crucial acoustic interplay with the capsule and functioning as a Faraday cage—a key aspect of achieving the correct performance and legendary U47 sound.\u003c\/p\u003e\n\n\u003cp\u003eThe CM7 FET Suprema features a one-piece backplate dual-membrane K47 capsule with individually tuned and matched diaphragms for equivalent response. Taking capsule design one step further beyond vintage specifications, Wunder Audio utilizes a white porcelain ring instead of plastic—providing low permeability and elasticity, considerable strength, hardness, resonance, and high resistance to chemical attack and thermal shock. This modern upgrade improves upon the white plastic rings used on the original K47, which were prone to discoloring and becoming soaked with impurities over the years, affecting electrical resistance and creating noise. Wunder Audio has optimized passive components by changing capacitor values to achieve a lower corner frequency, resulting in a modern-vintage sound where the spectrum opens up with enhanced sound staging, air, and transparency. The outcome is less grain, more fluid sound, and tighter, sharper focus.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLarge-diaphragm phantom-powered condenser microphone\u003c\/li\u003e\n\u003cli\u003eModern evolution of U47 FET with superior performance\u003c\/li\u003e\n\u003cli\u003eUltra-low noise single n-channel transistor with JFET technology\u003c\/li\u003e\n\u003cli\u003eNeve 1073 style mic pre-transformer for enhanced audio performance\u003c\/li\u003e\n\u003cli\u003eGreatly surpasses original U47 FET with better low-lows and highs\u003c\/li\u003e\n\u003cli\u003eReminiscent of 1970s era U87 character and versatility\u003c\/li\u003e\n\u003cli\u003eWorkhorse studio mic for all sources, especially vocals\u003c\/li\u003e\n\u003cli\u003eOne-piece backplate dual-membrane K47 capsule\u003c\/li\u003e\n\u003cli\u003eIndividually tuned and matched diaphragms for equivalent response\u003c\/li\u003e\n\u003cli\u003eWhite porcelain ring (modern upgrade from plastic)\u003c\/li\u003e\n\u003cli\u003eSuperior strength, hardness, resonance, and chemical resistance\u003c\/li\u003e\n\u003cli\u003eEliminates issues of discoloration and impurity absorption\u003c\/li\u003e\n\u003cli\u003eThree-layer grille mesh with Faraday cage properties\u003c\/li\u003e\n\u003cli\u003eVintage-authentic mesh gauge for legendary U47 sound\u003c\/li\u003e\n\u003cli\u003eOptimized passive components and capacitor values\u003c\/li\u003e\n\u003cli\u003eLower corner frequency for modern-vintage sound\u003c\/li\u003e\n\u003cli\u003eEnhanced sound staging, air, and transparency\u003c\/li\u003e\n\u003cli\u003eLess grainy, more fluid sound with tighter focus\u003c\/li\u003e\n\u003cli\u003eImproved one-piece yoke mount for durability\u003c\/li\u003e\n\u003cli\u003ePhantom powered—no tube PSU required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: Large-diaphragm phantom-powered condenser microphone\u003c\/li\u003e\n\u003cli\u003ePower: Phantom power (no external PSU required)\u003c\/li\u003e\n\u003cli\u003eCapsule: One-piece backplate dual-membrane K47 capsule\u003c\/li\u003e\n\u003cli\u003eDiaphragm Ring: White porcelain (modern upgrade)\u003c\/li\u003e\n\u003cli\u003eDiaphragm Configuration: Individually tuned and matched for equivalent response\u003c\/li\u003e\n\u003cli\u003ePolar Pattern: Cardioid (fixed)\u003c\/li\u003e\n\u003cli\u003eElectronics: Ultra-low noise single n-channel JFET transistor\u003c\/li\u003e\n\u003cli\u003eTransformer: Neve 1073 style mic pre-transformer\u003c\/li\u003e\n\u003cli\u003eGrille: Three-layer mesh (large, medium, fine) with Faraday cage properties\u003c\/li\u003e\n\u003cli\u003eGrille Type: Vintage-authentic mesh gauge\u003c\/li\u003e\n\u003cli\u003eCapacitors: Optimized passive components with modified values\u003c\/li\u003e\n\u003cli\u003eFrequency Response: Lower corner frequency, enhanced low-lows and highs\u003c\/li\u003e\n\u003cli\u003eSound Character: Modern-vintage with enhanced transparency and air\u003c\/li\u003e\n\u003cli\u003eMount: Improved one-piece yoke mount\u003c\/li\u003e\n\u003cli\u003eCase: Foam-lined oak-wooden box, clasped and hinged\u003c\/li\u003e\n\u003cli\u003eIncluded: CM7 FET S microphone, dual-membrane capsule, plush oak microphone box, historic shock-mount, 1-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":46829859242321,"sku":"29040","price":2139.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WUNDERAUDIOCM7FETS.jpg?v=1761831483"},{"product_id":"wunder-audio-cm7-gs-with-k47-capsule","title":"Wunder Audio CM7 GS with K47 Capsule","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eWunder Audio CM7 GS with K47 Capsule\u003c\/strong\u003e – a professional large-diaphragm tube condenser microphone representing the latest evolution of vintage U47 design with modern enhancements and K47 capsule configuration. The CM7 G (Glass Tube Switchable) Suprema combines authentic vintage sound with unprecedented versatility, featuring a switchable cardioid mode relay engineered inside the mic capsule compartment plus eight different polar patterns found in a vintage M49, making it like having two microphones in one.\u003c\/p\u003e\n\n\u003cp\u003eThe CM7 GS with K47 capsule delivers a balanced tone with detailed midrange and smooth highs, perfect for vocals and instruments. Its innovative hard-switched cardioid mode produces a smoother, more full-bodied sound, with the pattern switch located on the PSU but the actual switch point positioned directly below the capsule compartment. The authentic three-layer grille design features outer large mesh, inner medium mesh, and fine mesh sandwiched between, creating acoustic interplay with the capsule and functioning as a Faraday cage. The precision K47 dual-membrane capsule features a brass backplate hand-milled in Switzerland to the original 15\/10000th inch specification within one-micron tolerance—a modern upgrade from the original M7's which had up to 0.0002\" tolerance.\u003c\/p\u003e\n\n\u003cp\u003eThe CM7 GS is equipped with three mounting isolation rims providing improved ground isolation. Capsules are gold-skinned in Germany by master craftsmen. The NOS Telefunken 800 series glass tube is a modern derivative of the vintage steel tube, using the same system construction but in a package less likely to become microphonic. The transformer is a historic recreation wound to original Braunbuch specifications using NOS laminations with authentic vintage Mu-Metal and larger bobbin specs from early \"Large Badge\" U47s. Teflon wire insulation replaces problematic PVC for 100% reliability. Wunder Audio has enhanced their design with Suprema Silver Gold Oil capacitors featuring 99.99% silver and 1% gold metallization, creating exceptional image depth, enhanced sound staging, air, and transparency with tighter focus and less grain. The proprietary PSU features military-spec Grayhill switch for reliable pattern switching, universal voltage compatibility, and complete RF\/Wi-Fi interference shielding.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLarge-diaphragm tube condenser with Glass Tube Switchable technology\u003c\/li\u003e\n\u003cli\u003eK47 dual-membrane capsule with balanced tone, detailed midrange, and smooth highs\u003c\/li\u003e\n\u003cli\u003eSwitchable cardioid mode relay inside capsule compartment for smoother, full-bodied sound\u003c\/li\u003e\n\u003cli\u003eEight different polar patterns (vintage M49 configuration) plus hard-switched cardioid\u003c\/li\u003e\n\u003cli\u003eTwo microphones in one: vintage U47 cardioid + multi-pattern versatility\u003c\/li\u003e\n\u003cli\u003ePrecision K47 capsule with Swiss-milled brass backplate (one-micron tolerance)\u003c\/li\u003e\n\u003cli\u003eModern upgrade: 15\/10000th inch specification vs original 0.0002\" tolerance\u003c\/li\u003e\n\u003cli\u003eThree mounting isolation rims for improved ground isolation\u003c\/li\u003e\n\u003cli\u003eDiaphragm stretched and glued to rim, never screwed to backplate\u003c\/li\u003e\n\u003cli\u003eGold-skinned capsules crafted in Germany\u003c\/li\u003e\n\u003cli\u003eThree-layer grille mesh with Faraday cage properties\u003c\/li\u003e\n\u003cli\u003eNOS Telefunken 800 series glass tube (modern derivative, less microphonic)\u003c\/li\u003e\n\u003cli\u003eHistoric transformer with vintage Mu-Metal and NOS laminations\u003c\/li\u003e\n\u003cli\u003eLarger bobbin specs from early \"Large Badge\" U47s\u003c\/li\u003e\n\u003cli\u003eTeflon wire insulation for 100% reliability\u003c\/li\u003e\n\u003cli\u003eSuprema Silver Gold Oil capacitors (99.99% silver, 1% gold)\u003c\/li\u003e\n\u003cli\u003eEnhanced image depth, sound staging, air, and transparency\u003c\/li\u003e\n\u003cli\u003eProprietary PSU with military-spec Grayhill pattern switch\u003c\/li\u003e\n\u003cli\u003eUniversal voltage compatibility without jumper switch\u003c\/li\u003e\n\u003cli\u003e30-turn precision trim pots for voltage fine-tuning\u003c\/li\u003e\n\u003cli\u003eComplete RF and Wi-Fi interference shielding\u003c\/li\u003e\n\u003cli\u003eIdeal for vocals, acoustic instruments, drums, and versatile recording applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: Large-diaphragm tube condenser microphone (Glass Tube Switchable)\u003c\/li\u003e\n\u003cli\u003eCapsule: K47 dual-membrane capsule with Swiss precision brass backplate\u003c\/li\u003e\n\u003cli\u003eCapsule Specification: 15\/10000th inch rim height, one-micron tolerance\u003c\/li\u003e\n\u003cli\u003eCapsule Finish: Gold-skinned in Germany\u003c\/li\u003e\n\u003cli\u003eIsolation Rims: Three mounting isolation rims for improved ground isolation\u003c\/li\u003e\n\u003cli\u003eTube: NOS Telefunken 800 series glass tube\u003c\/li\u003e\n\u003cli\u003ePolar Patterns: Eight switchable patterns plus hard-switched cardioid mode\u003c\/li\u003e\n\u003cli\u003ePattern Switching: Internal relay below capsule compartment\u003c\/li\u003e\n\u003cli\u003eGrille: Three-layer mesh (large, medium, fine) with Faraday cage properties\u003c\/li\u003e\n\u003cli\u003eTransformer: Historic recreation with vintage Mu-Metal, NOS laminations\u003c\/li\u003e\n\u003cli\u003eTransformer Bobbin: Large bobbin (early U47 spec, 1\/8\" larger)\u003c\/li\u003e\n\u003cli\u003eWire Insulation: Teflon (upgraded from PVC)\u003c\/li\u003e\n\u003cli\u003eCapacitor: Suprema Silver Gold Oil, 1uF capacitance\u003c\/li\u003e\n\u003cli\u003eCapacitor Metallization: 99.99% silver, 1% gold\u003c\/li\u003e\n\u003cli\u003eCapacitor Purity: Silver min. 99.97% typ. 99.99%; Gold min. 99.97% typ. 99.99%\u003c\/li\u003e\n\u003cli\u003eDielectric: Polypropylene\u003c\/li\u003e\n\u003cli\u003ePower Supply: Proprietary Wunder Audio PSU, dual-pole neutral-fusing\u003c\/li\u003e\n\u003cli\u003ePattern Switch: Military-spec Grayhill switch\u003c\/li\u003e\n\u003cli\u003ePSU Features: Universal voltage, 30-turn trim pots, RF\/Wi-Fi shielding\u003c\/li\u003e\n\u003cli\u003eCable: Tube mic cable\u003c\/li\u003e\n\u003cli\u003eCase: Foam-lined quarter sawn oak box in velvet-lined tweed case\u003c\/li\u003e\n\u003cli\u003eIncluded: CM7 GS microphone with K47 capsule, plush oak box, historical shock mount, power supply, tube mic cable, Fender tweed carrying case with leather trim and combination lock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":46829859406161,"sku":"29041","price":3837.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WUNDERAUDIOCM7GSWITHK47CAPSULE.jpg?v=1761831347"},{"product_id":"wunder-audio-cm7-gs-with-m7-capsule","title":"Wunder Audio CM7 GS with M7 Capsule","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eWunder Audio CM7 GS with M7 Capsule\u003c\/strong\u003e – a professional large-diaphragm tube condenser microphone representing the ultimate evolution of vintage U47 design with modern enhancements. The CM7 G (Glass Tube Switchable) Suprema combines authentic vintage sound with unprecedented versatility, featuring a switchable cardioid mode relay engineered inside the mic capsule compartment plus eight different polar patterns found in a vintage M49, making it like having two microphones in one.\u003c\/p\u003e\n\n\u003cp\u003eThe CM7 GS delivers a smoother, more full-bodied sound through its innovative hard-switched cardioid mode, with the pattern switch located on the PSU but the actual switch point positioned directly below the capsule compartment. The authentic three-layer grille design features outer large mesh, inner medium mesh, and fine mesh sandwiched between, creating acoustic interplay with the capsule and functioning as a Faraday cage. The precision M7 capsule features a brass backplate hand-milled in Switzerland to the original 15\/10000th inch specification within one-micron tolerance—a modern upgrade from the original M7's which had up to 0.0002\" tolerance, explaining why some new U47s in the 1950s sounded better than others.\u003c\/p\u003e\n\n\u003cp\u003eThe CM7 GS with M7 capsule is equipped with three mounting isolation rims—true to the vintage Berlin M7 and a modern upgrade to the Gefell M7 which has only two—providing improved ground isolation. Capsules are gold-skinned in Germany by master craftsmen. The NOS Telefunken 800 series glass tube is a modern derivative of the vintage steel tube, using the same system construction but in a package less likely to become microphonic. The transformer is a historic recreation wound to original Braunbuch specifications using NOS laminations with authentic vintage Mu-Metal and larger bobbin specs. Teflon wire insulation replaces problematic PVC for 100% reliability. Wunder Audio has enhanced their design with Suprema Silver Gold Oil capacitors featuring 99.99% silver and 1% gold metallization, creating exceptional image depth, enhanced sound staging, air, and transparency with tighter focus and less grain. The proprietary PSU features military-spec Grayhill switch for reliable pattern switching, universal voltage compatibility, and complete RF\/Wi-Fi interference shielding.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLarge-diaphragm tube condenser with Glass Tube Switchable technology\u003c\/li\u003e\n\u003cli\u003eSwitchable cardioid mode relay inside capsule compartment for smoother, full-bodied sound\u003c\/li\u003e\n\u003cli\u003eEight different polar patterns (vintage M49 configuration) plus hard-switched cardioid\u003c\/li\u003e\n\u003cli\u003eTwo microphones in one: vintage U47 cardioid + multi-pattern versatility\u003c\/li\u003e\n\u003cli\u003ePrecision M7 capsule with Swiss-milled brass backplate (one-micron tolerance)\u003c\/li\u003e\n\u003cli\u003eModern upgrade: 15\/10000th inch specification vs original 0.0002\" tolerance\u003c\/li\u003e\n\u003cli\u003eThree mounting isolation rims for improved ground isolation\u003c\/li\u003e\n\u003cli\u003eDiaphragm stretched and glued to rim, never screwed to backplate\u003c\/li\u003e\n\u003cli\u003eGold-skinned capsules crafted in Germany\u003c\/li\u003e\n\u003cli\u003eThree-layer grille mesh with Faraday cage properties\u003c\/li\u003e\n\u003cli\u003eNOS Telefunken 800 series glass tube (modern derivative, less microphonic)\u003c\/li\u003e\n\u003cli\u003eHistoric transformer with vintage Mu-Metal and NOS laminations\u003c\/li\u003e\n\u003cli\u003eLarger bobbin specs from early \"Large Badge\" U47s\u003c\/li\u003e\n\u003cli\u003eTeflon wire insulation for 100% reliability\u003c\/li\u003e\n\u003cli\u003eSuprema Silver Gold Oil capacitors (99.99% silver, 1% gold)\u003c\/li\u003e\n\u003cli\u003eEnhanced image depth, sound staging, air, and transparency\u003c\/li\u003e\n\u003cli\u003eProprietary PSU with military-spec Grayhill pattern switch\u003c\/li\u003e\n\u003cli\u003eUniversal voltage compatibility without jumper switch\u003c\/li\u003e\n\u003cli\u003e30-turn precision trim pots for voltage fine-tuning\u003c\/li\u003e\n\u003cli\u003eComplete RF and Wi-Fi interference shielding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: Large-diaphragm tube condenser microphone (Glass Tube Switchable)\u003c\/li\u003e\n\u003cli\u003eCapsule: M7 capsule with Swiss precision brass backplate\u003c\/li\u003e\n\u003cli\u003eCapsule Specification: 15\/10000th inch rim height, one-micron tolerance\u003c\/li\u003e\n\u003cli\u003eCapsule Finish: Gold-skinned in Germany\u003c\/li\u003e\n\u003cli\u003eIsolation Rims: Three mounting isolation rims (Berlin M7 specification)\u003c\/li\u003e\n\u003cli\u003eTube: NOS Telefunken 800 series glass tube\u003c\/li\u003e\n\u003cli\u003ePolar Patterns: Eight switchable patterns plus hard-switched cardioid mode\u003c\/li\u003e\n\u003cli\u003ePattern Switching: Internal relay below capsule compartment\u003c\/li\u003e\n\u003cli\u003eGrille: Three-layer mesh (large, medium, fine) with Faraday cage properties\u003c\/li\u003e\n\u003cli\u003eTransformer: Historic recreation with vintage Mu-Metal, NOS laminations\u003c\/li\u003e\n\u003cli\u003eTransformer Bobbin: Large bobbin (early U47 spec)\u003c\/li\u003e\n\u003cli\u003eWire Insulation: Teflon (upgraded from PVC)\u003c\/li\u003e\n\u003cli\u003eCapacitor: Suprema Silver Gold Oil, 1uF capacitance\u003c\/li\u003e\n\u003cli\u003eCapacitor Metallization: 99.99% silver, 1% gold\u003c\/li\u003e\n\u003cli\u003eCapacitor Purity: Silver min. 99.97% typ. 99.99%; Gold min. 99.97% typ. 99.99%\u003c\/li\u003e\n\u003cli\u003eDielectric: Polypropylene\u003c\/li\u003e\n\u003cli\u003ePower Supply: Proprietary Wunder Audio PSU, dual-pole neutral-fusing\u003c\/li\u003e\n\u003cli\u003ePattern Switch: Military-spec Grayhill switch\u003c\/li\u003e\n\u003cli\u003ePSU Features: Universal voltage, 30-turn trim pots, RF\/Wi-Fi shielding\u003c\/li\u003e\n\u003cli\u003eCable: Tube mic cable\u003c\/li\u003e\n\u003cli\u003eCase: Foam-lined quarter sawn oak box in velvet-lined tweed case\u003c\/li\u003e\n\u003cli\u003eIncluded: CM7 GS microphone with M7 capsule, plush oak box, historical shock mount, power supply, tube mic cable, Fender tweed carrying case with leather trim and combination lock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":46829859602769,"sku":"29042","price":4595.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WUNDERAUDIOCM7GSWITHM7CAPSULE.jpg?v=1761831215"},{"product_id":"wunder-audio-cm7-s","title":"Wunder Audio CM7 S","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eWunder Audio CM7 Suprema\u003c\/strong\u003e – a professional large-diaphragm tube condenser microphone representing the pinnacle of vintage and modern microphone design. Built as a high-end recreation of the legendary 1950s Neumann U47, the CM7 S combines extraordinarily direct low-end responsiveness with a wide high-end plateau, delivering both the best qualities of a modern microphone and the iconic sound of a vintage classic.\u003c\/p\u003e\n\n\u003cp\u003eThe CM7 Suprema stands as a serious pro-studio workhorse with exceptional tonal balance across the frequency spectrum. Its authentic three-layer grille design features outer large mesh, inner medium mesh, and fine mesh sandwiched between, creating acoustic interplay with the capsule and functioning as a Faraday cage. The precision-engineered M7 capsule features a brass backplate hand-milled in Switzerland to the original 15\/10000th inch specification within one-micron tolerance, with diaphragms stretched and glued to the rim—never screwed to the backplate—ensuring unparalleled sonic accuracy.\u003c\/p\u003e\n\n\u003cp\u003eAt the heart of the CM7 S lies a modernized NOS Telefunken EF14 tube, carefully selected from the best production years. The transformer is a historic recreation of early \"Large Badge\" U47 transformers, wound to original Braunbuch specifications using NOS laminations with authentic vintage Mu-Metal and larger 1\/8\" bobbin specs. Teflon wire insulation replaces problematic PVC for 100% reliability. Wunder Audio has enhanced their vintage-inspired design with Suprema Silver Gold Oil capacitors—the highest quality available—featuring 99.99% silver and 1% gold metallization. This creates a modern-vintage sound where the spectrum opens up with enhanced sound staging, air, and transparency, resulting in less grain, more fluid sound, and tighter focus. The proprietary PSU delivers clean, stable DC voltage with complete RF\/Wi-Fi interference shielding and universal voltage compatibility. Exceptional for vocals, drums, acoustic guitars, and piano, the CM7 S brings out natural sound from any source.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLarge-diaphragm tube condenser, recreation of 1950s Neumann U47\u003c\/li\u003e\n\u003cli\u003eExtraordinarily direct low-end responsiveness and wide high-end plateau\u003c\/li\u003e\n\u003cli\u003eModernized NOS Telefunken EF14 tube from best production years\u003c\/li\u003e\n\u003cli\u003ePrecision M7 capsule with Swiss-milled brass backplate (one-micron tolerance)\u003c\/li\u003e\n\u003cli\u003eThree mounting isolation rims for improved ground isolation\u003c\/li\u003e\n\u003cli\u003eDiaphragm stretched and glued to rim, never screwed to backplate\u003c\/li\u003e\n\u003cli\u003eGold-skinned capsules crafted in Germany\u003c\/li\u003e\n\u003cli\u003eThree-layer grille mesh with Faraday cage properties\u003c\/li\u003e\n\u003cli\u003eHistoric transformer recreation with vintage Mu-Metal and NOS laminations\u003c\/li\u003e\n\u003cli\u003eLarger 1\/8\" bobbin specs from early \"Large Badge\" U47s\u003c\/li\u003e\n\u003cli\u003eTeflon wire insulation for 100% reliability\u003c\/li\u003e\n\u003cli\u003eSuprema Silver Gold Oil capacitors (99.99% silver, 1% gold)\u003c\/li\u003e\n\u003cli\u003eEnhanced sound staging, air, transparency, and micro-dynamic detail\u003c\/li\u003e\n\u003cli\u003eProprietary PSU with dual-pole neutral-fusing design\u003c\/li\u003e\n\u003cli\u003eUniversal voltage compatibility without jumper switch\u003c\/li\u003e\n\u003cli\u003e30-turn precision trim pots for voltage fine-tuning\u003c\/li\u003e\n\u003cli\u003eComplete RF and Wi-Fi interference shielding\u003c\/li\u003e\n\u003cli\u003eExceptional for vocals, drums, acoustic guitars, and piano\u003c\/li\u003e\n\u003cli\u003eNatural sound reproduction from any source\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: Large-diaphragm tube condenser microphone\u003c\/li\u003e\n\u003cli\u003eCapsule: M7 capsule with Swiss precision brass backplate\u003c\/li\u003e\n\u003cli\u003eCapsule Specification: 15\/10000th inch rim height, one-micron tolerance\u003c\/li\u003e\n\u003cli\u003eCapsule Finish: Gold-skinned in Germany\u003c\/li\u003e\n\u003cli\u003eTube: Modernized NOS Telefunken EF14\u003c\/li\u003e\n\u003cli\u003ePolar Pattern: Cardioid (fixed)\u003c\/li\u003e\n\u003cli\u003eGrille: Three-layer mesh (large, medium, fine) with Faraday cage properties\u003c\/li\u003e\n\u003cli\u003eTransformer: Historic recreation with vintage Mu-Metal, NOS laminations\u003c\/li\u003e\n\u003cli\u003eTransformer Bobbin: Large 1\/8\" bobbin (early U47 spec)\u003c\/li\u003e\n\u003cli\u003eWire Insulation: Teflon (upgraded from PVC)\u003c\/li\u003e\n\u003cli\u003eCapacitor: Suprema Silver Gold Oil, 1uF capacitance\u003c\/li\u003e\n\u003cli\u003eCapacitor Metallization: 99.99% silver, 1% gold\u003c\/li\u003e\n\u003cli\u003eCapacitor Purity: Silver min. 99.97% typ. 99.99%; Gold min. 99.97% typ. 99.99%\u003c\/li\u003e\n\u003cli\u003eDielectric: Polypropylene\u003c\/li\u003e\n\u003cli\u003ePower Supply: Proprietary Wunder Audio PSU, dual-pole neutral-fusing\u003c\/li\u003e\n\u003cli\u003ePSU Features: Universal voltage, 30-turn trim pots, RF\/Wi-Fi shielding\u003c\/li\u003e\n\u003cli\u003eCable: Original large Tuchel connector\u003c\/li\u003e\n\u003cli\u003eCase: Foam-lined quarter sawn oak box in velvet-lined tweed case\u003c\/li\u003e\n\u003cli\u003eIncluded: CM7 microphone, plush oak box, historical shock mount, power supply, Tuchel cable, Fender tweed carrying case with leather trim and combination lock\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":46829859668305,"sku":"29043","price":6980.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WUNDERAUDIOCM7S1.jpg?v=1761831005"},{"product_id":"wunder-audio-pafour-plus","title":"Wunder Audio PAFour Plus","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eWunder Audio PAFOUR Plus\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cp\u003eThe PAFOUR Plus is a 19\" four-channel microphone preamplifier — four channels of the identical PEQ2 preamp circuit in a single 1U rack unit. It is the most channel-dense way to build a Wunder Audio preamp section in a rack environment: the same discrete Class-A topology, the same NICO transformers wound on core material dating from 1970, and the same extended output stage before the output transformer — all repeated four times across one rack slot. The physical size of the transformers in the PAFOUR Plus is unprecedented for a four-channel rack mic pre.\u003c\/p\u003e\n\n  \u003ch3\u003eFour Channels of PEQ2 — No Transformer Compromises\u003c\/h3\u003e\n  \u003cp\u003eThe defining engineering decision of the PAFOUR Plus is the use of exactly the same Mu-Metal NICO transformers as the PEQ2 — on all four channels. The transformer core material dates from 1970 and contributes the characteristic fat vintage sound with minimal phase shift inherent to the PEQ2 line. The low winding ratio of 1:1.4 allows the preamp to handle very high input levels without requiring a pad in the signal path. The line and instrument input circuit is identical to the PEQ2R's line input stage — 60 dB of gain on the line input, enabling direct bass guitar or instrument recording into the Wunder without an external DI box. The new beefy output stage added directly before the output transformer increases maximum gain and headroom over the original PAFOUR. Gain switches carry more than three times the gold contact area per position compared to the previous generation. The gain knob includes an additional counterclockwise position reaching -24 dB. Per channel: discrete active HPF, output fader, LED metering with separate signal and clip indicators, and light-pipe pushbuttons. Knobs are milled from aluminum, anodized red, with white plastic dowel markers that will not wear off.\u003c\/p\u003e\n\n  \u003ch3\u003ePSU Scalability and System Expansion\u003c\/h3\u003e\n  \u003cp\u003eThe PAFOUR Plus draws power from an external Wunder Audio PSU: the Blue Box PSU handles two units (8 channels), the Black Box PSU covers up to four PAFOUR units (16 channels) or up to eight PAFOUR Plus units daisy-chained (32 channels). This makes the PAFOUR Plus the most efficient way to build a large Wunder Audio preamp section in a rack: eight PAFOUR Plus units from a single Black Box PSU deliver 32 channels of PEQ2-equivalent preamp character at the minimum possible rack space. The 5' DC Main Cable and 1' daisy-chain cables per additional unit are required and sold separately.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e4-channel mic preamp 19\" 1U — identical PEQ2 preamp circuit on every channel\u003c\/li\u003e\n    \u003cli\u003eNICO Mu-Metal (Ni\/Fe\/Co) transformers with 1970 core material — same spec as PEQ2, 1:1.4 winding ratio\u003c\/li\u003e\n    \u003cli\u003eNew beefy output stage before output transformer — greater headroom than original PAFOUR\u003c\/li\u003e\n    \u003cli\u003eLine\/instrument input: 60 dB gain, Active or Classic Input mode (DI without external DI box)\u003c\/li\u003e\n    \u003cli\u003eGain switches: over 3x gold contact area per position vs. previous generation\u003c\/li\u003e\n    \u003cli\u003eGain knob: additional -24 dB position\u003c\/li\u003e\n    \u003cli\u003eDiscrete active high-pass filter per channel\u003c\/li\u003e\n    \u003cli\u003eOutput fader per channel\u003c\/li\u003e\n    \u003cli\u003eLight-pipe pushbuttons per channel\u003c\/li\u003e\n    \u003cli\u003eLED metering: green (signal) \/ red (clip) per channel\u003c\/li\u003e\n    \u003cli\u003eKnobs: milled aluminum, anodized red, non-wearing white plastic dowel markers\u003c\/li\u003e\n    \u003cli\u003eTack-welded thick-gauge enclosure — improved RF protection vs. previous generation\u003c\/li\u003e\n    \u003cli\u003e1% Metal Film resistors throughout PCB\u003c\/li\u003e\n    \u003cli\u003ePower: Blue Box PSU (up to 2 units) or Black Box PSU (up to 4 PAFOUR units \/ up to 8 PAFOUR Plus = 32 channels)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: 4-channel mic preamp, 19\" 1U rack format\u003c\/li\u003e\n    \u003cli\u003eChannels: 4\u003c\/li\u003e\n    \u003cli\u003eCircuit: identical to PEQ2 preamp section (discrete Class-A, 1970s topology)\u003c\/li\u003e\n    \u003cli\u003eTransformers: NICO Mu-Metal (Ni\/Fe\/Co), 1:1.4 winding ratio, 1970 core material\u003c\/li\u003e\n    \u003cli\u003eLine input gain: 60 dB\u003c\/li\u003e\n    \u003cli\u003eInstrument input: 1\/4\" jack, Active \/ Classic mode\u003c\/li\u003e\n    \u003cli\u003eHigh-pass filter: discrete active (per channel)\u003c\/li\u003e\n    \u003cli\u003eOutput fader: yes (per channel)\u003c\/li\u003e\n    \u003cli\u003eGain range: to -24 dB (additional CCW position)\u003c\/li\u003e\n    \u003cli\u003eSwitches: light-pipe pushbuttons, Grayhill\u003c\/li\u003e\n    \u003cli\u003eMetering: LED green (signal) \/ red (clip) per channel\u003c\/li\u003e\n    \u003cli\u003eResistors: 1% Metal Film throughout\u003c\/li\u003e\n    \u003cli\u003eEnclosure: thick-gauge tack-welded metal\u003c\/li\u003e\n    \u003cli\u003ePower: external PSU — Blue Box (up to 2 units) or Black Box (up to 4 PAFOUR \/ up to 8 PAFOUR Plus = 32 channels)\u003c\/li\u003e\n    \u003cli\u003eRequired accessories: 5' DC Main Cable, 1' daisy-chain cable per additional unit (sold separately)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":53670069141841,"sku":"29044","price":2728.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WunderAudioPAFourPlus.jpg?v=1778416751"},{"product_id":"wunder-audio-peq2-module","title":"Wunder Audio PEQ2 Module","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eWunder Audio PEQ2 — Module for Console or Rack\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cp\u003eThe PEQ2 is a single-channel microphone preamplifier and three-band EQ in console module format — fully discrete Class-A topology in the 1970s tradition, developed as a direct enhancement of the PEQ1 module that originated from John Paul Jones' 1971 Allotrope console. The 18-pin gold-plated Amphenol connector mates directly with vintage Neve 80-series consoles or compatible racks, making the PEQ2 a drop-in 1073 replacement. The sonic resemblance to the 1073 ends at the pinout: the PEQ2 uses Wunder Audio's own NICO Western Electric 618B-style (Ni\/Fe\/Co) transformers, an extended output stage, and improved switches that give it a distinct character. It is the standard channel amplifier across all Wunderbar configurations from 8 to 60 channels and the circuit foundation shared by the Cobalt Pre and PEQ2R.\u003c\/p\u003e\n\n  \u003ch3\u003eExtended Output Stage and NICO Transformers\u003c\/h3\u003e\n  \u003cp\u003eThe defining upgrade over the PEQ1 is a new output stage added directly before the output transformer, delivering higher maximum gain and greater headroom whether tracking loud sources or working in summing environments. The NICO (Ni\/Fe\/Co) Western Electric 618B-style transformers use the same lamination specification as the original 1971 Allotrope modules — the same material that inspired the PEQ1 and has defined the Wunder Audio sonic character across the full product line since. Grayhill gain and EQ switches carry more than three times the gold contact surface area per position compared to the PEQ1, translating to consistent contact reliability and parameter stability over years of heavy use. The gain knob carries an additional counterclockwise position reaching -24 dB, versus -18 dB on older units. A global EQ bypass removes the entire correction stage from the signal path; each band also carries its own individual bypass switch. Light-pipe pushbuttons, a discrete active HPF, and LED metering with separate signal and clip indicators are consistent with the Wunderbar console specification.\u003c\/p\u003e\n\n  \u003ch3\u003eApplication and Compatibility\u003c\/h3\u003e\n  \u003cp\u003eThe PEQ2 installs directly into any Wunderbar slot or any 80-series compatible frame via its 18-pin Amphenol connector — the same pinout as the Neve 1073, requiring no modification to the host console or rack. It is available as a standalone raw module, in a two-channel boutique horizontal rack, or in an eight-channel vertical rack system. The PEQ2 circuit and transformers are the exact specification used in the Cobalt Pre (same preamp in 500 Series format) and the PEQ2R (same module in 19\" 1U rack format with external PSU). Switchable EQ frequencies spanning 40 Hz to 20 kHz, mic\/line switchability, and 78 dB of total gain make the PEQ2 equally suited to tracking, mixing, and mastering applications.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eSingle-channel mic preamp with 3-band EQ in console module format\u003c\/li\u003e\n    \u003cli\u003eDirect 1073 replacement — 18-pin gold-plated Amphenol connector, compatible with Neve 80-series and Wunderbar\u003c\/li\u003e\n    \u003cli\u003eExtended output stage before output transformer — higher maximum gain than PEQ1\u003c\/li\u003e\n    \u003cli\u003eNICO Western Electric 618B-style (Ni\/Fe\/Co) transformers — upgraded from PEQ1\u003c\/li\u003e\n    \u003cli\u003eGrayhill switches: gain and EQ with over 3x gold contact area per position vs. PEQ1\u003c\/li\u003e\n    \u003cli\u003eGlobal EQ bypass + individual per-band bypass\u003c\/li\u003e\n    \u003cli\u003eGain knob: additional -24 dB position (vs. -18 dB on older units)\u003c\/li\u003e\n    \u003cli\u003eDiscrete active high-pass filter\u003c\/li\u003e\n    \u003cli\u003eLight-pipe pushbuttons as used in Wunderbar consoles\u003c\/li\u003e\n    \u003cli\u003eLED metering: green (signal) \/ red (clip)\u003c\/li\u003e\n    \u003cli\u003eSwitchable EQ frequencies: 40 Hz – 20 kHz\u003c\/li\u003e\n    \u003cli\u003e1% Metal Film resistors throughout PCB\u003c\/li\u003e\n    \u003cli\u003eShared circuit foundation with Cobalt Pre (500 Series) and PEQ2R (19\" rack)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: single-channel mic preamp\/EQ console module \/ boutique rack format\u003c\/li\u003e\n    \u003cli\u003eSignal path: fully discrete Class-A, 1970s topology\u003c\/li\u003e\n    \u003cli\u003eTotal gain: 78 dB\u003c\/li\u003e\n    \u003cli\u003eEQ bands: 3 (low, mid, high) — switchable frequencies 40 Hz – 20 kHz\u003c\/li\u003e\n    \u003cli\u003eEQ bypass: global + per-band\u003c\/li\u003e\n    \u003cli\u003eHigh-pass filter: discrete active\u003c\/li\u003e\n    \u003cli\u003eTransformers: NICO Western Electric 618B-style (Ni\/Fe\/Co)\u003c\/li\u003e\n    \u003cli\u003eConnector: 18-pin gold-plated Amphenol\u003c\/li\u003e\n    \u003cli\u003eCompatibility: Neve 80-series, Wunderbar\u003c\/li\u003e\n    \u003cli\u003eSwitches: Grayhill custom, light-pipe pushbuttons\u003c\/li\u003e\n    \u003cli\u003eResistors: 1% Metal Film throughout\u003c\/li\u003e\n    \u003cli\u003eMetering: LED green (signal) \/ red (clip)\u003c\/li\u003e\n    \u003cli\u003eAlso available as: PEQ2R (19\" 1U rack), Cobalt Pre (500 Series preamp-only)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":53670069174609,"sku":"29045","price":2695.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WunderAudioPEQ2Module.jpg?v=1778416742"},{"product_id":"wunder-audio-peq2r","title":"Wunder Audio PEQ2R","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eWunder Audio PEQ2R\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cp\u003eThe PEQ2R is the 19\" 1U rack version of the PEQ2 module — a single-channel mic preamp and three-band EQ in a rack enclosure, retaining the full discrete Class-A topology and NICO transformers identical to the console module. This is not a simplified adaptation for the rack format: Wunder Audio redesigned the enclosure, PCB, and output stage to deliver more maximum gain and better RF protection than the previous PEQ1R, while maintaining the same sonic character as the PEQ2 in the Wunderbar. Power comes from an external Blue Box or Black Box PSU, sold separately.\u003c\/p\u003e\n\n  \u003ch3\u003eEnhanced Output Stage and NICO Transformers\u003c\/h3\u003e\n  \u003cp\u003eThe defining upgrade over the PEQ1R is a new output stage added directly before the output transformer — this translates to higher maximum gain and greater headroom when working with loud sources or in summing applications. The NICO (Ni\/Fe\/Co) Western Electric 618-style transformers are an upgrade from the previous generation, using the same lamination specification that defines the sonic character of the full Wunder Audio line from the PEQ1 through the Wunderbar. Gain and EQ switches carry more than three times the gold contact surface area per switch position compared to the PEQ1R — a direct improvement in contact reliability and longevity over the life of the unit. The output potentiometer is a logarithmic taper conductive plastic design functioning as an output fader, rated for one million cycles. The gain knob now includes an additional counterclockwise position reaching -24 dB, versus -18 dB on older units — useful when working with very hot sources or in high-gain summing contexts.\u003c\/p\u003e\n\n  \u003ch3\u003eInstrument Input, HPF, and PSU Integration\u003c\/h3\u003e\n  \u003cp\u003eThe PEQ2R includes a 1\/4\" instrument input with selectable Active or Classic Input mode — the same line input stage circuit as the PEQ2, delivering 60 dB of gain on the line input, which allows direct bass guitar or instrument recording into the Wunder without an external DI box. A discrete active high-pass filter, 48V phantom power switch, and LED metering with separate signal and clip indicators round out the control set. The enclosure uses tack-welded thick-gauge metal for superior RF shielding compared to the previous generation. The PCB is fully redesigned with thicker copper traces and an optimized component layout, with 14-point RF filtering throughout. One-percent Metal Film resistors maintain a low noise floor and consistent parameter matching between units. The PEQ2R is powered by the Blue Box PSU (up to 4 units) or Black Box PSU (up to 12 units), both sold separately, requiring the 5' DC Main Cable to connect.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e19\" 1U rack version of the PEQ2 module — full discrete Class-A topology with no format compromises\u003c\/li\u003e\n    \u003cli\u003eNew output stage before the output transformer — higher maximum gain than PEQ1R\u003c\/li\u003e\n    \u003cli\u003eNICO Western Electric 618-style (Ni\/Fe\/Co) transformers — upgraded from PEQ1R\u003c\/li\u003e\n    \u003cli\u003eGain and EQ switches: over 3x gold contact area per switch position vs. PEQ1R\u003c\/li\u003e\n    \u003cli\u003eOutput potentiometer: logarithmic taper conductive plastic (output fader function)\u003c\/li\u003e\n    \u003cli\u003eGain knob: additional -24 dB position (vs. -18 dB on older units)\u003c\/li\u003e\n    \u003cli\u003e1\/4\" instrument input: Active or Classic Input mode, 60 dB gain on line input\u003c\/li\u003e\n    \u003cli\u003e48V phantom power\u003c\/li\u003e\n    \u003cli\u003eDiscrete active high-pass filter\u003c\/li\u003e\n    \u003cli\u003eLight-pipe pushbuttons as used in Wunderbar consoles\u003c\/li\u003e\n    \u003cli\u003eLED metering: green (signal) \/ red (clip)\u003c\/li\u003e\n    \u003cli\u003eTack-welded thick-gauge enclosure, 14-point RF filtering\u003c\/li\u003e\n    \u003cli\u003e1% Metal Film resistors throughout PCB\u003c\/li\u003e\n    \u003cli\u003ePower: Blue Box PSU (up to 4 units) or Black Box PSU (up to 12 units) — sold separately\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: single-channel mic preamp with EQ, 19\" 1U rack format\u003c\/li\u003e\n    \u003cli\u003eSignal path: discrete Class-A\u003c\/li\u003e\n    \u003cli\u003eTransformers: NICO Western Electric 618-style (Ni\/Fe\/Co)\u003c\/li\u003e\n    \u003cli\u003eEQ bands: 3 (low, mid, high — switchable shelving \/ bell)\u003c\/li\u003e\n    \u003cli\u003eHigh-pass filter: discrete active\u003c\/li\u003e\n    \u003cli\u003eMic input: transformer-balanced XLR\u003c\/li\u003e\n    \u003cli\u003eInstrument input: 1\/4\" jack, Active \/ Classic mode (60 dB gain on line input)\u003c\/li\u003e\n    \u003cli\u003ePhantom power: 48V\u003c\/li\u003e\n    \u003cli\u003eOutput potentiometer: logarithmic taper conductive plastic\u003c\/li\u003e\n    \u003cli\u003eGain range: to -24 dB (additional CCW position)\u003c\/li\u003e\n    \u003cli\u003eResistors: 1% Metal Film throughout\u003c\/li\u003e\n    \u003cli\u003eEnclosure: thick-gauge tack-welded metal, RF filtering\u003c\/li\u003e\n    \u003cli\u003eSwitches: light-pipe pushbuttons, Grayhill (gain and EQ)\u003c\/li\u003e\n    \u003cli\u003eMetering: LED green (signal) \/ red (clip)\u003c\/li\u003e\n    \u003cli\u003ePower: external PSU — Blue Box (up to 4 units) or Black Box (up to 12 units), 5' DC Main Cable sold separately\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":53670069207377,"sku":"29046","price":2440.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WunderAudioPEQ2R.jpg?v=1778416731"},{"product_id":"wunder-audio-wunderbar-console-24-channel","title":"Wunder Audio Wunderbar Console - 24 channel, 32 monitors, 1 Powerbar PSU, Exquisite Trim","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eWunder Audio Wunderbar Console — 24 Channel, 32 Monitors, 1 Powerbar PSU, Exquisite Trim\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cp\u003eThe 24-channel Wunderbar with 32 monitor paths is the configuration where the full Wunderbahn architecture — three independent stereo buses, fully discrete Class-A signal path, and transformer balancing at every stage — sits in a frame that fits comfortably in a mid-sized studio room. A single Powerbar PSU covers this configuration with fully isolated DC voltage and audio paths. It is the right scale for environments that combine ensemble tracking with extended overdub sessions and hybrid analog\/DAW mixing workflows, without requiring the physical footprint or dual PSU infrastructure of the larger frames.\u003c\/p\u003e\n\n  \u003ch3\u003eWunderbahn Summing Architecture Across 24 Channels\u003c\/h3\u003e\n  \u003cp\u003eThe Fully Balanced Busing Scheme removes ground from the audio path across all 24 channels — the same discrete summing architecture as the 48- and 56-channel configurations, delivering the same increase in dynamic range and reduction in residual noise. The three stereo bus amplifiers — Wunder, Neve 1272, and API 312 — operate independently or cascade simultaneously, with proportions adjusted by six master faders in the center section. At 24 channels, routing different instrument groups to different bus flavors becomes a direct mixing decision: drums and rhythm section through the API character, vocals and keys through the Neve texture, all within the same session. All 24 channels carry transformer-balanced Direct Outputs and Insert Send\/Return loops. The 1046 Routing Modules are fully transformer-balanced Class-A Discrete, with a flip-able monitor fader, six group buses with illuminated switches, four aux sends switchable pre\/post, Pan Defeat, 48V phantom power, and Opto Silent Mute.\u003c\/p\u003e\n\n  \u003ch3\u003eD-Sub Connectivity and Build Specification\u003c\/h3\u003e\n  \u003cp\u003eIn Super D format, all connections across each eight-channel section run on D-Sub 25 connectors: Mic Input, Line Input, Direct Output, Routing Module Input, Insert Send, Insert Return, DAW Input, and DAW Mult. Across 24 channels that means three eight-channel D-Sub sections — a clean, fast wiring architecture for hybrid analog\/DAW setups where rear-of-desk organization directly affects session speed. Channel strip EQ is configurable as PEQ2 or PEQ4 four-band modules, with mixed configurations supported within the same frame. Exquisite Trim covers the end caps, meter bridge, and armrest in 1.5\" solid hardwood (Oak, Walnut, or Roasted Coffee Bean Birch) with an inlaid logo, finished with Black or Brown Top Grain leather. Every unit is hand-built to the client's exact specifications, with a 50% non-refundable deposit required to initiate the build.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eWunderbahn system: three independent stereo buses — Wunder, Neve 1272, API 312 — separable or cascaded\u003c\/li\u003e\n    \u003cli\u003e24 input channels, 32 monitor paths\u003c\/li\u003e\n    \u003cli\u003e1x Powerbar PSU with isolated DC voltage and audio paths\u003c\/li\u003e\n    \u003cli\u003ePEQ2 or PEQ4 four-band EQ modules — mixed configurations supported within one frame\u003c\/li\u003e\n    \u003cli\u003eTransformer-balanced Direct Outputs and Insert loops on every channel\u003c\/li\u003e\n    \u003cli\u003e1046 Routing Modules: Class-A Discrete, 6 group buses, 4 pre\/post auxes, Pan Defeat, 48V phantom, Opto Silent Mute\u003c\/li\u003e\n    \u003cli\u003eFlip-able monitor fader on every channel strip\u003c\/li\u003e\n    \u003cli\u003e8-channel sections: D-Sub 25 connectors on all I\/O (Mic In, Line In, Direct Out, Insert, DAW In, DAW Mult)\u003c\/li\u003e\n    \u003cli\u003eExquisite Trim: 1.5\" solid hardwood, Top Grain leather armrest\u003c\/li\u003e\n    \u003cli\u003eFully custom hand-built to order (50% non-refundable deposit required)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eInput channels: 24\u003c\/li\u003e\n    \u003cli\u003eMonitor paths: 32\u003c\/li\u003e\n    \u003cli\u003ePower supply: 1x Powerbar PSU\u003c\/li\u003e\n    \u003cli\u003eSignal path: fully discrete Class-A, transformer balanced throughout\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 8 Hz – 120+ kHz (flat)\u003c\/li\u003e\n    \u003cli\u003eSignal-to-noise ratio: better than 105 dB\u003c\/li\u003e\n    \u003cli\u003eStereo buses: 3 (Wunder, 1272, 312)\u003c\/li\u003e\n    \u003cli\u003eAux sends: 4 (pre\/post switchable)\u003c\/li\u003e\n    \u003cli\u003eGroup buses: 6 (illuminated switches)\u003c\/li\u003e\n    \u003cli\u003e8-channel section connectors: D-Sub 25\u003c\/li\u003e\n    \u003cli\u003eTransformers: Western Electric 618-style, NICO core (Ni\/Fe\/Co)\u003c\/li\u003e\n    \u003cli\u003ePotentiometers: Vishay audio-grade conductive plastic (1,000,000 cycle rated)\u003c\/li\u003e\n    \u003cli\u003eSwitches: custom Greyhill\u003c\/li\u003e\n    \u003cli\u003eTrim: 1.5\" solid hardwood (Oak \/ Walnut \/ Roasted Coffee Bean Birch), Top Grain leather\u003c\/li\u003e\n    \u003cli\u003eOptions: internal patchbay (8x 19\"), Cinema Display section 27\"\/32\", Insert Enable\/Defeat panel, Stereo Bus Inserts, Black Hammerite stand (12–36 ch version)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":53670069240145,"sku":"29048","price":80534.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WunderAudioWunderbarConsole-24channel_3b7917af-42df-477a-9db1-231088623da6.jpg?v=1778416719"},{"product_id":"wunder-audio-wunderbar-console-48-channel","title":"Wunder Audio Wunderbar Console - 48 channel, 56 monitors, 2 Powerbar PSU’s, Exquisite Trim","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eWunder Audio Wunderbar Console — 48 Channel, 56 Monitors, 2x Powerbar PSU, Exquisite Trim\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cp\u003eThe 48-channel Wunderbar with 56 monitor paths is one of the largest configurations in the lineup and the natural specification for a full-scale commercial control room. Two Powerbar PSUs with isolated DC voltage and audio paths carry the complete load of 48 channels running simultaneously without voltage stability or noise floor compromises. Fifty-six monitor paths give the engineer complete inline flexibility across the largest tracking and overdub sessions — orchestral dates, large-band recordings, complex overdub builds — without splitting or submixing upstream. Every unit is hand-built to the client's exact specification by a team of over a dozen specialists.\u003c\/p\u003e\n\n  \u003ch3\u003eWunderbahn at Full Scale — 48 Channels of Discrete Summing\u003c\/h3\u003e\n  \u003cp\u003eThe Fully Balanced Busing Scheme removes ground from the audio path across all 48 channels, delivering the same measurable increase in dynamic range and reduction in residual noise as in the smaller configurations — but at a scale where the cumulative effect of ground management across dozens of simultaneous signals becomes audible in the depth and coherence of the mix bus. The Wunderbahn's three independent stereo bus amplifiers — Wunder, Neve 1272, and API 312 — operate separately or cascade simultaneously with proportions set by six master faders in the center section. At 48 channels, the ability to assign different instrument groups to different bus flavors — drums and bass through the API, strings and keys through the Neve — becomes a substantive mixing decision, not just a tonal option. All 48 channels carry transformer-balanced Direct Outputs and Insert Send\/Return loops. The 1046 Routing Modules are fully transformer-balanced Class-A Discrete, with a flip-able monitor fader, six group buses with illuminated switches, four aux sends switchable pre\/post, Pan Defeat, 48V phantom power, and Opto Silent Mute.\u003c\/p\u003e\n\n  \u003ch3\u003eMaster Section, D-Sub Connectivity, and Configuration Options\u003c\/h3\u003e\n  \u003cp\u003eThe master section includes a Control Room Monitor for six stereo sources including buses, Mono\/Dim\/Mute\/Solo Clear on large illuminated switches, selection between three speaker pairs or a headphone amplifier with independent level control, internal subgroup-to-stereo-bus routing without external patching, and an eight-fader monitor section with solo, pan, and bus assignment per fader. In Super D format, all connections across each eight-channel section run on D-Sub 25 connectors. The Exquisite Trim package covers end caps, meter bridge, and armrest in 1.5\" solid hardwood (Oak, Walnut, or Roasted Coffee Bean Birch) with an inlaid logo, finished with Black or Brown Top Grain leather. Channel strip EQ is configurable as PEQ2 or PEQ4 four-band modules, with mixed configurations supported within the same frame.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eWunderbahn system: three independent stereo buses — Wunder, Neve 1272, API 312 — separable or cascaded\u003c\/li\u003e\n    \u003cli\u003e48 input channels, 56 monitor paths\u003c\/li\u003e\n    \u003cli\u003e2x Powerbar PSU with isolated DC voltage and audio paths\u003c\/li\u003e\n    \u003cli\u003ePEQ2 or PEQ4 four-band EQ modules — mixed configurations supported within one frame\u003c\/li\u003e\n    \u003cli\u003eTransformer-balanced Direct Outputs and Insert loops on every channel\u003c\/li\u003e\n    \u003cli\u003e1046 Routing Modules: Class-A Discrete, 6 group buses, 4 pre\/post auxes, Pan Defeat, 48V phantom, Opto Silent Mute\u003c\/li\u003e\n    \u003cli\u003eFlip-able monitor fader on every channel strip\u003c\/li\u003e\n    \u003cli\u003e8-channel sections: D-Sub 25 connectors on all I\/O (Mic In, Line In, Direct Out, Insert, DAW In, DAW Mult)\u003c\/li\u003e\n    \u003cli\u003eMaster section: 6-source stereo monitor, 3 speaker pairs, headphone amp, internal subgroup routing without external patching\u003c\/li\u003e\n    \u003cli\u003eExquisite Trim: 1.5\" solid hardwood, Top Grain leather armrest\u003c\/li\u003e\n    \u003cli\u003eFully custom hand-built to order (50% non-refundable deposit required)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eInput channels: 48\u003c\/li\u003e\n    \u003cli\u003eMonitor paths: 56\u003c\/li\u003e\n    \u003cli\u003ePower supply: 2x Powerbar PSU\u003c\/li\u003e\n    \u003cli\u003eSignal path: fully discrete Class-A, transformer balanced throughout\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 8 Hz – 120+ kHz (flat)\u003c\/li\u003e\n    \u003cli\u003eSignal-to-noise ratio: better than 105 dB\u003c\/li\u003e\n    \u003cli\u003eStereo buses: 3 (Wunder, 1272, 312)\u003c\/li\u003e\n    \u003cli\u003eAux sends: 4 (pre\/post switchable)\u003c\/li\u003e\n    \u003cli\u003eGroup buses: 6 (illuminated switches)\u003c\/li\u003e\n    \u003cli\u003e8-channel section connectors: D-Sub 25\u003c\/li\u003e\n    \u003cli\u003eTransformers: Western Electric 618-style, NICO core (Ni\/Fe\/Co)\u003c\/li\u003e\n    \u003cli\u003ePotentiometers: Vishay audio-grade conductive plastic (1,000,000 cycle rated)\u003c\/li\u003e\n    \u003cli\u003eSwitches: custom Greyhill\u003c\/li\u003e\n    \u003cli\u003eTrim: 1.5\" solid hardwood (Oak \/ Walnut \/ Roasted Coffee Bean Birch), Top Grain leather\u003c\/li\u003e\n    \u003cli\u003eOptions: internal patchbay (8x 19\"), Cinema Display section 27\"\/32\", Insert Enable\/Defeat panel, Stereo Bus Inserts, Black Hammerite stand (48–60 ch version)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":53670069272913,"sku":"29050","price":168926.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WunderAudioWunderbarConsole-24channel.jpg?v=1778416706"},{"product_id":"wunder-audio-cobalt-pre","title":"Wunder Audio Cobalt PRE","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eWunder Audio Cobalt Pre\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cp\u003eThe Cobalt Pre is a single-channel microphone preamplifier in 500 Series format, built on the same circuit, input transformer, and output transformer as the Wunder Audio PEQ2. The name is a direct reference to the Ni\/Fe\/Co laminations used in its transformers — the same laminations that were used in the original 1971 Allotrope console modules of John Paul Jones, which became the founding reference for the entire Wunder Audio line from the PEQ1 onwards. The Cobalt Pre answers one question precisely: how to deliver the full preamp character of the PEQ2 in a single 500 Series slot with no technical simplification.\u003c\/p\u003e\n\n  \u003ch3\u003ePEQ2 Preamp in a 500 Series Slot — No Compromises\u003c\/h3\u003e\n  \u003cp\u003eEvery aspect of the Cobalt Pre's design — from the metalwork to the component selection at every junction in the circuit — mirrors the PEQ2 standard, realized in a 500 Series enclosure. The transformers are wound from the same Ni\/Fe\/Co laminations as the original Allotrope modules, and they are large enough that they barely fit inside the module's case — there is no scaling down of the transformer specification for the format change. This is not a reworked version of the PEQ2 circuit adapted to a smaller chassis: it is the same discrete Class-A topology with identical input and output transformers. Wiring is precise, soldering is meticulous, and components throughout the circuit meet the same top-tier specification as the full-size console modules and 19\" rack units in the Wunder Audio line.\u003c\/p\u003e\n\n  \u003ch3\u003eCobalt Pre and Allotrope EQ as a 500 Series Pair\u003c\/h3\u003e\n  \u003cp\u003eThe Cobalt Pre and the Allotrope EQ form a complete channel strip in the 500 Series format: the PEQ2 preamp circuit in one slot, and the PEQ2 inductor-based Baxandall EQ circuit in the adjacent slot. Together they deliver the full PEQ2 character — preamp and EQ — in two 500 Series slots, without requiring a console module or a 19\" rack unit. As a standalone preamp, the Cobalt Pre is the right tool wherever EQ is handled at a different stage of the chain or inside the DAW, and the priority is the transformer-driven character of the preamp itself.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e500 Series mic preamp — same circuit, input transformer, and output transformer as the Wunder Audio PEQ2\u003c\/li\u003e\n    \u003cli\u003eTransformers wound from Ni\/Fe\/Co laminations — same as the original 1971 Allotrope modules (John Paul Jones' console)\u003c\/li\u003e\n    \u003cli\u003eDiscrete Class-A signal path — meticulous wiring and soldering to console module standard\u003c\/li\u003e\n    \u003cli\u003eMetalwork and components: PEQ2 standard at every junction in the circuit\u003c\/li\u003e\n    \u003cli\u003e500 Series format: single slot, compatible with all 500 Series racks\u003c\/li\u003e\n    \u003cli\u003eNatural partner for the Allotrope EQ — together form a 500 Series channel strip with full PEQ2 character\u003c\/li\u003e\n    \u003cli\u003eHand-built in Austin, TX\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: single-channel mic preamp, 500 Series format\u003c\/li\u003e\n    \u003cli\u003eCircuit: identical to the preamp section of the Wunder Audio PEQ2\u003c\/li\u003e\n    \u003cli\u003eInput transformer: Ni\/Fe\/Co — same laminations as original 1971 Allotrope modules\u003c\/li\u003e\n    \u003cli\u003eOutput transformer: Ni\/Fe\/Co — identical to PEQ2\u003c\/li\u003e\n    \u003cli\u003eSignal path: discrete Class-A\u003c\/li\u003e\n    \u003cli\u003eMetalwork and components: PEQ2 standard throughout\u003c\/li\u003e\n    \u003cli\u003eFormat: 500 Series (single slot)\u003c\/li\u003e\n    \u003cli\u003eProduction: hand-built, Austin, TX\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":53670069305681,"sku":"40936","price":820.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WunderAudioCobaltPRE.jpg?v=1778416692"},{"product_id":"wunder-audio-tube-mic-power-supply","title":"Wunder Audio Tube Mic Power Supply","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eWunder Audio Tube Mic Power Supply\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cp\u003eThe Wunder Audio Tube Mic Power Supply is a purpose-built power supply for tube condenser microphones, designed from the ground up as a proprietary engineering solution — not an adaptation of vintage 1960s PSU topology, but a direct improvement on it. The core problem it addresses is RF and WiFi interference entering the high-voltage path in conventional tube mic PSU designs and degrading tube and capsule performance. Wunder's solution is a high-voltage path that runs constant current, balanced against a shunt regulator — the result is a completely clean DC voltage delivered to the microphone with no RF or WiFi interference reaching the signal chain.\u003c\/p\u003e\n\n  \u003ch3\u003eProprietary High-Voltage Path and Voltage Regulation\u003c\/h3\u003e\n  \u003cp\u003eThe constant-current high-voltage architecture with shunt regulation eliminates AC ripple and RF interference at a level unavailable in standard transformer-based PSU designs. Internal voltage trimming is handled by 30-turn precision potentiometers — most PSU designs lack voltage adjustment entirely, and those that include it typically use single-turn pots prone to drift over time. The dual-pole neutral-fusing design accepts any mains voltage worldwide without requiring jumper changes or manual voltage selection. The pattern switch version uses a military-spec Grayhill switch for the most reliable directional pattern control — the same Grayhill specification Wunder Audio uses in its console switching. Available configurations include a standard version, a version with pattern switch, and an optional stereo version. On special order, the PSU can be configured to run with most tube condenser microphones regardless of manufacturer.\u003c\/p\u003e\n\n  \u003ch3\u003eCompatibility with Wunder Audio and Vintage Microphones\u003c\/h3\u003e\n  \u003cp\u003eThis PSU ships as standard with all Wunder Audio tube condenser microphones — CM7 Suprema, CM12 Suprema, CM49 Suprema, CM50 Suprema, CM67, and ELA M 251. Every microphone in that line relies on this generation of PSU for clean, stable DC delivery to the tube and capsule with full RF shielding. On special order, the unit can be configured to power most tube microphones from other manufacturers, making it a practical upgrade path for engineers running vintage or third-party tube mics where the original PSU is aging or inadequate for modern RF-dense studio environments.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eProprietary high-voltage path: constant current balanced against a shunt regulator — no AC ripple, full RF and WiFi interference elimination\u003c\/li\u003e\n    \u003cli\u003e30-turn precision potentiometers for fine voltage adjustment on all supply rails\u003c\/li\u003e\n    \u003cli\u003eDual-pole neutral-fusing design — worldwide mains voltage compatibility, no jumper required\u003c\/li\u003e\n    \u003cli\u003eAvailable versions: standard, with pattern switch, stereo (optional)\u003c\/li\u003e\n    \u003cli\u003ePattern switch: military-spec Grayhill (switchable version)\u003c\/li\u003e\n    \u003cli\u003eSpecial-order configuration for most tube condenser microphones from other manufacturers\u003c\/li\u003e\n    \u003cli\u003eStandard PSU for Wunder Audio tube mics: CM7 S, CM12 S, CM49 S, CM50 S, CM67, ELA M 251\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: power supply unit for tube condenser microphones\u003c\/li\u003e\n    \u003cli\u003eArchitecture: constant-current high-voltage path with shunt regulator\u003c\/li\u003e\n    \u003cli\u003eInterference rejection: full RF and WiFi elimination\u003c\/li\u003e\n    \u003cli\u003eVoltage adjustment: 30-turn precision potentiometers (all supply rails)\u003c\/li\u003e\n    \u003cli\u003eMains input: universal — dual-pole neutral-fusing, no jumper setting required\u003c\/li\u003e\n    \u003cli\u003eAvailable versions: standard \/ with pattern switch \/ stereo (optional)\u003c\/li\u003e\n    \u003cli\u003ePattern switch: military-spec Grayhill (switchable version)\u003c\/li\u003e\n    \u003cli\u003eCompatibility: Wunder Audio CM7 S, CM12 S, CM49 S, CM50 S, CM67, ELA M 251; special-order configuration for most third-party tube condenser microphones\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":53670069338449,"sku":"41725","price":480.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WunderAudioTubeMicPowerSupply.jpg?v=1778416683"},{"product_id":"wunder-audio-allotrope-eq","title":"Wunder Audio Allotrope EQ","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eWunder Audio Allotrope EQ\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cp\u003eThe Allotrope EQ is a single-channel inductor-based Baxandall equalizer in 500 Series format, built on the same EQ circuit as the Wunder Audio PEQ2. The name is a direct reference: in 1971, Led Zeppelin bassist and keyboardist John Paul Jones commissioned a one-of-a-kind custom console called the Allotrope. That console became the founding reference point for the entire Wunder Audio line — from the PEQ1 through the PEQ2 and into the Wunderbar. The Allotrope EQ carries the PEQ2's correction section into the 500 Series format without simplification — metalwork, components, and transformers all meet the same build standard as the console modules.\u003c\/p\u003e\n\n  \u003ch3\u003eInductor-Based Baxandall in 500 Series Format\u003c\/h3\u003e\n  \u003cp\u003eInductor-based Baxandall architecture produces smooth, wide correction curves — no hard bandwidth limits and none of the phase artifacts associated with active RC filters. That curve shape is particularly useful for broad tonal moves: adding low end sounds like a natural thickening of the band, and opening up the top does not introduce harshness or artificial sheen. The transformers are wound from the same Ni\/Fe\/Co laminations used in the original 1971 Allotrope modules — the same laminations that informed the PEQ1 and subsequently the PEQ2. The signal path is discrete Class-A throughout, built to the same level of craftsmanship as the full-size console modules: precise wiring, impeccable soldering, and top-tier components at every junction in the circuit.\u003c\/p\u003e\n\n  \u003ch3\u003ePEQ2 Correction Circuit in a 500 Series Slot\u003c\/h3\u003e\n  \u003cp\u003eThe Allotrope EQ answers a specific question: how to access the PEQ2's EQ character in a 500 Series slot with no quality compromises. Every aspect of the design — from the metalwork to the component selection — mirrors the PEQ2 standard, realized in a smaller enclosure. For engineers who know the PEQ2's sound from tracking sessions or from working on Wunderbar consoles, the Allotrope delivers the same musical inductor-based correction in a 500 Series rack environment — as a standalone EQ without a preamp stage, ready to run in an insert chain or on a DAW return.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eInductor-based Baxandall EQ in 500 Series format — same EQ circuit as the Wunder Audio PEQ2\u003c\/li\u003e\n    \u003cli\u003eTransformers wound from the original Ni\/Fe\/Co laminations used in the 1971 Allotrope modules (John Paul Jones' console)\u003c\/li\u003e\n    \u003cli\u003eDiscrete Class-A signal path — meticulous wiring and soldering to console module standard\u003c\/li\u003e\n    \u003cli\u003eBaxandall correction curves: wide-band, smooth, no phase artifacts from active RC filtering\u003c\/li\u003e\n    \u003cli\u003eTop-tier components at every circuit junction — identical standard to the PEQ2\u003c\/li\u003e\n    \u003cli\u003e500 Series format: compatible with all 500 Series racks\u003c\/li\u003e\n    \u003cli\u003eHand-built in Austin, TX\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: inductor-based Baxandall EQ, 500 Series format\u003c\/li\u003e\n    \u003cli\u003eEQ circuit: identical to Wunder Audio PEQ2\u003c\/li\u003e\n    \u003cli\u003eEQ architecture: inductor-based (Baxandall)\u003c\/li\u003e\n    \u003cli\u003eSignal path: discrete Class-A\u003c\/li\u003e\n    \u003cli\u003eTransformers: Ni\/Fe\/Co — same laminations as original 1971 Allotrope modules\u003c\/li\u003e\n    \u003cli\u003eMetalwork and components: PEQ2-standard throughout\u003c\/li\u003e\n    \u003cli\u003eFormat: 500 Series (single slot)\u003c\/li\u003e\n    \u003cli\u003eProduction: hand-built, Austin, TX\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":53670069403985,"sku":"41726","price":855.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WunderAudioAllotropeEQ.jpg?v=1778416668"},{"product_id":"wunder-audio-peq4-hiq-module","title":"Wunder Audio PEQ4 HiQ module for console or rack","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eWunder Audio PEQ4 HiQ — Module for Console or Rack\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cp\u003eThe PEQ4 HiQ in module format is a four-band microphone preamplifier and EQ designed for installation in Wunderbar consoles or any slot compatible with the Neve 1073 standard. Developed in 2019 for Roger Waters' 48-channel Wunderbar, it is a direct architectural extension of the PEQ2 — same preamp, same transformers, same output stage — with an added second mid band, selectable Q on both mid frequencies, and refined boost and cut amplifiers. The rear connector is fully interchangeable with the PEQ2 and 1073, allowing drop-in installation without any console or rack modification.\u003c\/p\u003e\n\n  \u003ch3\u003eFour Bands, Selectable Q, and Silent Relay Switching\u003c\/h3\u003e\n  \u003cp\u003eThe EQ section covers four independent bands: low, low-mid, high-mid, and high. Low and high bands are the same switchable shelving as the PEQ2. The two mid bands are the defining addition — each has selectable narrow or wide Q, enabling precise cuts or boosts at specific frequencies without spreading correction into adjacent ranges. The refined boost and cut amplifiers deliver higher resolution over the same frequency range compared to the PEQ2's single mid band. All pushbutton switches operate a relay: audio stays in direct circuit and never passes through the switch mechanics, eliminating noise transients during EQ changes mid-session. A global EQ bypass removes the entire correction stage from the signal path with one button; each of the four bands also carries its own individual bypass. Gun-metal gray aluminum knobs, Grayhill switches with light-pipe illumination, and LED metering with separate signal and clip indicators are consistent across the full Wunder Audio line.\u003c\/p\u003e\n\n  \u003ch3\u003eShared Platform with PEQ2 — Console Integration\u003c\/h3\u003e\n  \u003cp\u003eThe microphone preamplifier in the PEQ4 is identical to the PEQ2: same Class-A discrete topology, same additional output stage ahead of the output transformer for maximum gain headroom, and the same NICO Western Electric 618B-style (Ni\/Fe\/Co) transformers on the mic input, line input, and output. The thick-gauge Mu-Metal enclosure provides the same RF shielding specification. In a Wunderbar console, PEQ4 modules can be mixed in any channel position alongside PEQ2 and PEQ1 modules — each slot is an independent choice between two-band and four-band EQ within the same desk. Total available gain is 78 dB. Throughout the PCB, 1% Metal Film resistors keep the noise floor low and ensure consistent parameter matching between units. The module is also available in 19\" 1U horizontal rack format as the PEQ4 HiQ 19\" 1U version.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e4-band mic preamp\/EQ in console module format — originally designed for Roger Waters' 48-channel Wunderbar (2019)\u003c\/li\u003e\n    \u003cli\u003eIdentical preamp to PEQ2: same Class-A topology, same extended output stage before output transformer\u003c\/li\u003e\n    \u003cli\u003eNICO Western Electric 618B-style (Ni\/Fe\/Co) transformers — mic in, line in, output\u003c\/li\u003e\n    \u003cli\u003e4 EQ bands: low, low-mid, high-mid, high\u003c\/li\u003e\n    \u003cli\u003eSelectable narrow or wide Q on both mid bands\u003c\/li\u003e\n    \u003cli\u003eRefined boost\/cut amplifiers with higher resolution than PEQ2\u003c\/li\u003e\n    \u003cli\u003eGlobal EQ bypass + individual per-band bypass\u003c\/li\u003e\n    \u003cli\u003eSilent relay switching — audio never passes through switch mechanics\u003c\/li\u003e\n    \u003cli\u003eDiscrete active high-pass filter\u003c\/li\u003e\n    \u003cli\u003ePhase switch\u003c\/li\u003e\n    \u003cli\u003eLED metering: green (signal) \/ red (clip)\u003c\/li\u003e\n    \u003cli\u003eLight-pipe pushbuttons and Grayhill switches\u003c\/li\u003e\n    \u003cli\u003eThick-gauge Mu-Metal enclosure — RF shielding\u003c\/li\u003e\n    \u003cli\u003eRear connector interchangeable with PEQ2 and Neve 1073\u003c\/li\u003e\n    \u003cli\u003e1% Metal Film resistors throughout PCB\u003c\/li\u003e\n    \u003cli\u003eAlso available as PEQ4 HiQ 19\" 1U version\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: 4-band mic preamp\/EQ console module \/ rack format\u003c\/li\u003e\n    \u003cli\u003eSignal path: fully discrete Class-A\u003c\/li\u003e\n    \u003cli\u003eTotal gain: 78 dB\u003c\/li\u003e\n    \u003cli\u003eEQ bands: 4 (low, low-mid, high-mid, high)\u003c\/li\u003e\n    \u003cli\u003eSelectable Q: yes — narrow \/ wide on both mid bands\u003c\/li\u003e\n    \u003cli\u003eEQ bypass: global + per-band\u003c\/li\u003e\n    \u003cli\u003eSwitching: relay-activated (silent)\u003c\/li\u003e\n    \u003cli\u003eHigh-pass filter: discrete active\u003c\/li\u003e\n    \u003cli\u003ePhase switch: yes\u003c\/li\u003e\n    \u003cli\u003eTransformers: NICO Western Electric 618B-style (Ni\/Fe\/Co)\u003c\/li\u003e\n    \u003cli\u003eEnclosure: thick-gauge Mu-Metal\u003c\/li\u003e\n    \u003cli\u003eResistors: 1% Metal Film throughout\u003c\/li\u003e\n    \u003cli\u003eSwitches: Grayhill custom, light-pipe pushbuttons\u003c\/li\u003e\n    \u003cli\u003eKnobs: aluminum, gun-metal gray\u003c\/li\u003e\n    \u003cli\u003eRear connector compatibility: PEQ2 \/ Neve 1073\u003c\/li\u003e\n    \u003cli\u003eMetering: LED green (signal) \/ red (clip)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":53670069698897,"sku":"41727","price":2615.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WunderAudioPEQ4HiQmoduleforconsoleorrack.jpg?v=1778416656"},{"product_id":"wunder-audio-peq4-hiq-19","title":"Wunder Audio PEQ4 HiQ  19” 1U version","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eWunder Audio PEQ4 HiQ — 19\" 1U\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cp\u003eThe PEQ4 HiQ in 19\" 1U format is a four-band microphone preamplifier and EQ originally designed in 2019 for Roger Waters' 48-channel Wunderbar. It carries the same preamp topology, output stage, and transformers as the PEQ2, extending the EQ section with a second mid band and selectable Q on both mid frequencies, plus refined boost and cut amplifiers with higher resolution than the PEQ2. It is not a replacement for the PEQ2 — it is a more detailed tool for engineers who need tighter EQ precision while retaining exactly the same Wunder Audio preamp character.\u003c\/p\u003e\n\n  \u003ch3\u003eFour Bands, Selectable Q, and Silent Relay Switching\u003c\/h3\u003e\n  \u003cp\u003eThe EQ section covers four independent bands: low, low-mid, high-mid, and high. The low and high bands are the same switchable shelving as on the PEQ2. The two mid bands are where the PEQ4 separates itself — each has selectable narrow or wide Q, allowing precise cuts or boosts at specific frequencies without spreading correction into adjacent ranges. The refined boost and cut amplifiers provide greater resolution over the same frequency range compared to the PEQ2's single mid band. All pushbutton switches operate a relay: audio stays in direct circuit and never passes through the switch mechanics, eliminating noise transients during EQ changes in a live session. A global EQ bypass pulls the entire correction stage out of circuit with one button; each of the four bands also has its own individual bypass. Gun-metal gray aluminum knobs, Grayhill switches with light-pipe illumination, and LED metering with separate signal and clip indicators are consistent with the rest of the Wunder Audio line.\u003c\/p\u003e\n\n  \u003ch3\u003eShared Platform with PEQ2 — Extended EQ Capability\u003c\/h3\u003e\n  \u003cp\u003eThe microphone preamplifier in the PEQ4 is identical to the PEQ2 — same Class-A discrete topology, same additional output stage ahead of the output transformer for maximum gain headroom, same NICO Western Electric 618B-style (Ni\/Fe\/Co) transformers on the mic input, line input, and output. The thick-gauge Mu-Metal enclosure provides the same RF shielding. The rear connector is fully interchangeable with the PEQ2 and Neve 1073, meaning the PEQ4 drops into any 1073-compatible console slot without modification. Total available gain is 78 dB. Throughout the PCB, 1% Metal Film resistors keep noise floor low and ensure consistent parameter matching between units.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e4-band mic preamp\/EQ in 19\" 1U format — originally designed for Roger Waters' 48-channel Wunderbar (2019)\u003c\/li\u003e\n    \u003cli\u003eIdentical preamp to PEQ2: same Class-A topology, same extended output stage before output transformer\u003c\/li\u003e\n    \u003cli\u003eNICO Western Electric 618B-style (Ni\/Fe\/Co) transformers — mic in, line in, output\u003c\/li\u003e\n    \u003cli\u003e4 EQ bands: low, low-mid, high-mid, high\u003c\/li\u003e\n    \u003cli\u003eSelectable narrow or wide Q on both mid bands\u003c\/li\u003e\n    \u003cli\u003eRefined boost\/cut amplifiers with higher resolution than PEQ2\u003c\/li\u003e\n    \u003cli\u003eGlobal EQ bypass + individual per-band bypass\u003c\/li\u003e\n    \u003cli\u003eSilent relay switching — audio never passes through switch mechanics\u003c\/li\u003e\n    \u003cli\u003eDiscrete active high-pass filter\u003c\/li\u003e\n    \u003cli\u003ePhase switch\u003c\/li\u003e\n    \u003cli\u003eLED metering: green (signal) \/ red (clip)\u003c\/li\u003e\n    \u003cli\u003eLight-pipe pushbuttons and Grayhill switches\u003c\/li\u003e\n    \u003cli\u003eThick-gauge Mu-Metal enclosure — RF shielding\u003c\/li\u003e\n    \u003cli\u003eRear connector interchangeable with PEQ2 and Neve 1073\u003c\/li\u003e\n    \u003cli\u003e1% Metal Film resistors throughout PCB\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: 4-band mic preamp\/EQ, 19\" 1U format\u003c\/li\u003e\n    \u003cli\u003eSignal path: fully discrete Class-A\u003c\/li\u003e\n    \u003cli\u003eTotal gain: 78 dB\u003c\/li\u003e\n    \u003cli\u003eEQ bands: 4 (low, low-mid, high-mid, high)\u003c\/li\u003e\n    \u003cli\u003eSelectable Q: yes — narrow \/ wide on both mid bands\u003c\/li\u003e\n    \u003cli\u003eEQ bypass: global + per-band\u003c\/li\u003e\n    \u003cli\u003eSwitching: relay-activated (silent)\u003c\/li\u003e\n    \u003cli\u003eHigh-pass filter: discrete active\u003c\/li\u003e\n    \u003cli\u003ePhase switch: yes\u003c\/li\u003e\n    \u003cli\u003eTransformers: NICO Western Electric 618B-style (Ni\/Fe\/Co)\u003c\/li\u003e\n    \u003cli\u003eEnclosure: thick-gauge Mu-Metal\u003c\/li\u003e\n    \u003cli\u003eResistors: 1% Metal Film throughout\u003c\/li\u003e\n    \u003cli\u003eSwitches: Grayhill custom, light-pipe pushbuttons\u003c\/li\u003e\n    \u003cli\u003eKnobs: aluminum, gun-metal gray\u003c\/li\u003e\n    \u003cli\u003eRear connector compatibility: PEQ2 \/ Neve 1073\u003c\/li\u003e\n    \u003cli\u003eMetering: LED green (signal) \/ red (clip)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":53670069731665,"sku":"41728","price":3095.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WunderAudioPEQ4HiQ19_1Uversion.jpg?v=1778416646"},{"product_id":"wunder-audio-peqtube-module","title":"Wunder Audio PEQTube module for console or rack","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eWunder Audio PEQTube — Module for Console or Rack\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cp\u003eThe PEQTube is a tube microphone preamplifier with a two-band switchable shelving EQ in console module format — designed for installation in Wunderbar consoles or any slot compatible with the Neve 1073 standard. It is the only tube module in the Wunder Audio lineup, introducing a distinct class of sound alongside the discrete PEQ2 and PEQ4: dense, saturated midrange, a natural compression behavior at higher signal levels, and smooth high-frequency response characteristic of Western Electric tube topology. It installs in the same console slot as a PEQ2 or PEQ1 with no hardware modification required.\u003c\/p\u003e\n\n  \u003ch3\u003eWestern Electric Tube Architecture Restored\u003c\/h3\u003e\n  \u003cp\u003eThe PEQTube is Wunder Audio's direct reintroduction of the Western Electric tube mic preamp circuit — the same architecture that powered Capitol Records' Studio during the classic Frank Sinatra sessions and Motown's Hitsville U.S.A. recording studio. The signal path is all-discrete through-hole topology with large Mu-Metal input and output transformers. Those transformers are Wunder Audio's own NICO Western Electric 618B-style (Ni\/Fe\/Co) — identical to those specified in the PEQ2 and PEQ4 modules, ensuring tonal consistency with the rest of the Wunder Audio signal chain. The two-band EQ offers switchable shelving with a global bypass pulling the entire EQ stage out of circuit, plus per-band bypass for each band independently. Discrete active high-pass filter, phase switch, and LED metering with separate signal and clip indicators complete the control layout. All pushbuttons use Grayhill switches with light-pipe illumination — the same specification as the Wunderbar console itself.\u003c\/p\u003e\n\n  \u003ch3\u003eInstallation Flexibility: Console and Rack\u003c\/h3\u003e\n  \u003cp\u003eIn console format, the PEQTube installs into any Wunderbar slot without modification — rear connections and supply voltages are identical to the Neve 1073 standard, making it fully interchangeable within any 80-series compatible frame. It can sit in any channel position alongside PEQ2 and PEQ1 modules in the same console, giving the engineer per-channel choice between tube and discrete character within a single desk. For standalone rack use, the same electronics are available in 19\" 1U format as the PEQTubeR, powered by a Blue Box or Black Box PSU via the standard 5' DC Main Cable. Both versions share identical circuitry and transformer specifications — the format is the only variable.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eTube mic preamp with 2-band EQ in console module format\u003c\/li\u003e\n    \u003cli\u003eWestern Electric all-discrete through-hole topology with large Mu-Metal transformers\u003c\/li\u003e\n    \u003cli\u003eNICO Western Electric 618B-style (Ni\/Fe\/Co) input and output transformers\u003c\/li\u003e\n    \u003cli\u003e2-band switchable shelving EQ — global bypass and individual per-band bypass\u003c\/li\u003e\n    \u003cli\u003eDiscrete active high-pass filter\u003c\/li\u003e\n    \u003cli\u003ePhase switch\u003c\/li\u003e\n    \u003cli\u003eLED metering: green (signal) \/ red (clip)\u003c\/li\u003e\n    \u003cli\u003eLight-pipe pushbuttons and Grayhill switches with high gold-contact surface area\u003c\/li\u003e\n    \u003cli\u003eCompatible with Neve 80-series and Wunderbar console slots (same rear connections and voltages as 1073)\u003c\/li\u003e\n    \u003cli\u003eInstalls alongside PEQ2 and PEQ1 modules in the same console without modification\u003c\/li\u003e\n    \u003cli\u003eAlso available as PEQTubeR in 19\" 1U rack format\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: tube mic preamp module with EQ, console \/ rack format\u003c\/li\u003e\n    \u003cli\u003eSignal path: tube, all-discrete through-hole\u003c\/li\u003e\n    \u003cli\u003eTransformers: NICO Western Electric 618B-style (Ni\/Fe\/Co), large Mu-Metal enclosures\u003c\/li\u003e\n    \u003cli\u003eEQ: 2-band switchable shelving, global bypass, per-band bypass\u003c\/li\u003e\n    \u003cli\u003eHigh-pass filter: discrete active\u003c\/li\u003e\n    \u003cli\u003ePhase switch: yes\u003c\/li\u003e\n    \u003cli\u003eMetering: LED green (signal) \/ red (clip)\u003c\/li\u003e\n    \u003cli\u003eSwitches: Grayhill custom, light-pipe pushbuttons\u003c\/li\u003e\n    \u003cli\u003eConsole compatibility: Neve 80-series \/ Wunderbar (same connectors and voltages as 1073)\u003c\/li\u003e\n    \u003cli\u003eRack version: PEQTubeR 19\" 1U (sold separately)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":53670069764433,"sku":"41729","price":2353.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WunderAudioPEQTubemoduleforconsoleorrack.jpg?v=1778416635"},{"product_id":"wunder-audio-peqtuber-19","title":"Wunder Audio PEQTubeR  19” 1U version","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eWunder Audio PEQTubeR — 19\" 1U\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cp\u003eThe PEQTubeR is the 19\" 1U rack version of the PEQTube module — a tube microphone preamplifier with an integrated two-band switchable shelving EQ, built on Western Electric circuit topology. Where the PEQ2 and PEQ4 operate through fully discrete transistor paths, the PEQTube introduces a different character into the Wunder Audio ecosystem: denser midrange, smoother highs, and a natural saturation behavior at higher signal levels that discrete Class-A topology does not replicate by design.\u003c\/p\u003e\n\n  \u003ch3\u003eWestern Electric Tube Topology in Rack Format\u003c\/h3\u003e\n  \u003cp\u003eThe PEQTubeR is a direct translation of the PEQTube module into a 19\" 1U enclosure, preserving the same all-discrete through-hole topology with large Mu-Metal input and output transformers. Those transformers are Wunder Audio's own NICO Western Electric 618B-style (Ni\/Fe\/Co) — the same core used across the PEQ2R and PEQ4R, delivering the transformer density and coherence that defines the Wunder Audio sound across the entire product line. The two-band EQ section provides switchable shelving with a global EQ bypass that pulls the entire correction stage out of circuit, plus individual band bypass for each band independently. A discrete active high-pass filter, phase switch, and LED metering with separate signal and clip indicators round out the control set. The pushbuttons use light-pipe illumination — identical to the switches specified for the Wunderbar console.\u003c\/p\u003e\n\n  \u003ch3\u003eTube Preamp as a Deliberate Complement to the Discrete Path\u003c\/h3\u003e\n  \u003cp\u003eWunder Audio designed the PEQTube as a deliberate complement to the PEQ2 and PEQ4, not a replacement. In a Wunderbar console, the PEQTube module installs in the same slot as a PEQ2 or PEQ1 — rear connections and supply voltages are identical to Neve 1073 format, requiring no console modification. In rack format, the PEQTubeR draws power from a Wunder Audio Blue Box or Black Box PSU via the standard 5' DC Main Cable (sold separately). Engineers who have worked with the PEQTube consistently note the midrange density as the defining characteristic — other preamps sound comparatively scooped or open against it — alongside smooth high-frequency behavior and a controlled, musical low end.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eTube microphone preamplifier with 2-band EQ in 19\" 1U rack format\u003c\/li\u003e\n    \u003cli\u003eWestern Electric all-discrete through-hole topology with large Mu-Metal transformers\u003c\/li\u003e\n    \u003cli\u003eNICO Western Electric 618B-style (Ni\/Fe\/Co) input and output transformers\u003c\/li\u003e\n    \u003cli\u003e2-band switchable shelving EQ — global bypass and individual per-band bypass\u003c\/li\u003e\n    \u003cli\u003eDiscrete active high-pass filter\u003c\/li\u003e\n    \u003cli\u003ePhase switch\u003c\/li\u003e\n    \u003cli\u003eLED metering: green (signal) \/ red (clip)\u003c\/li\u003e\n    \u003cli\u003eLight-pipe pushbuttons as used in Wunderbar consoles\u003c\/li\u003e\n    \u003cli\u003eGrayhill custom switches with high gold-contact surface area per position\u003c\/li\u003e\n    \u003cli\u003eConsole-compatible with Neve 80-series \/ Wunderbar slots (same rear connections and voltages as 1073)\u003c\/li\u003e\n    \u003cli\u003ePowered by external Wunder Audio PSU — Blue Box or Black Box (5' DC Main Cable sold separately)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: tube mic preamp with EQ, 19\" 1U rack format\u003c\/li\u003e\n    \u003cli\u003eSignal path: tube, all-discrete through-hole\u003c\/li\u003e\n    \u003cli\u003eTransformers: NICO Western Electric 618B-style (Ni\/Fe\/Co), large Mu-Metal enclosures\u003c\/li\u003e\n    \u003cli\u003eEQ: 2-band switchable shelving, global bypass, per-band bypass\u003c\/li\u003e\n    \u003cli\u003eHigh-pass filter: discrete active\u003c\/li\u003e\n    \u003cli\u003ePhase switch: yes\u003c\/li\u003e\n    \u003cli\u003eMetering: LED green (signal) \/ red (clip)\u003c\/li\u003e\n    \u003cli\u003eSwitches: Grayhill custom, light-pipe pushbuttons\u003c\/li\u003e\n    \u003cli\u003eConsole compatibility: Neve 80-series \/ Wunderbar slots (same connectors and voltages as 1073)\u003c\/li\u003e\n    \u003cli\u003ePower: external Wunder Audio PSU — Blue Box or Black Box (5' DC Main Cable sold separately)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":53670069797201,"sku":"41730","price":2795.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WunderAudioPEQTubeR19_1Uversion.jpg?v=1778416624"},{"product_id":"wunder-audio-blue-box-psu","title":"Wunder Audio Blue Box PSU","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eWunder Audio Blue Box PSU\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cp\u003eThe Blue Box PSU is the compact DC power supply for smaller Wunder Audio rack configurations — it powers up to 4 PEQ2R modules or up to 2 PAFOUR units, covering up to 8 channels of preamp and EQ from a single unit. For a project studio or a recording room running a focused Wunder Audio rack section, it delivers everything the Black Box does in terms of voltage architecture and monitoring, at a fraction of the size and weight.\u003c\/p\u003e\n\n  \u003ch3\u003eCompact Footprint, Full Voltage Architecture\u003c\/h3\u003e\n  \u003cp\u003eThe Blue Box outputs two independent supply voltages: 24V DC for the audio circuitry and 48V DC for phantom power, each with a dedicated indicator LED so the status of both rails is visible at a glance. At 2\" x 3¼\" x 6½\" and 3 lbs, it sits on a desk surface or inside a rack without requiring a dedicated 19\" rack slot. Despite its size, it is designed with headroom above its rated maximum load — at 4 PEQ2R modules or 2 PAFOUR units, voltage delivery remains stable with no compression at the ceiling of its rated capacity. Connection to the first module requires the 5' DC Main Cable (sold separately); any additional modules chain off the previous unit via the 1' daisy-chain cable (sold separately).\u003c\/p\u003e\n\n  \u003ch3\u003eBlue Box vs. Black Box: Choosing the Right PSU\u003c\/h3\u003e\n  \u003cp\u003eThe Blue Box is the correct choice for configurations up to 4 PEQ2R modules or 2 PAFOUR units — up to 8 channels total. That covers a standard project studio rack: two PEQ2R modules for 4 channels of preamp and EQ, or a single PAFOUR for 4 channels of preamp in 19\" format. Once the rack grows beyond that threshold, the Black Box PSU takes over, handling up to 12 PEQ2R modules or 4 PAFOUR units. Both PSUs share the same DC cabling system — the 5' DC Main and 1' daisy-chain cables are fully interchangeable between the two.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003ePowers up to 4 PEQ2R modules or up to 2 PAFOUR units (up to 8 channels) from a single PSU\u003c\/li\u003e\n    \u003cli\u003eTwo independent output voltages: 24V DC (audio) and 48V DC (phantom power)\u003c\/li\u003e\n    \u003cli\u003eSeparate indicator LEDs for 24V DC and 48V DC rails\u003c\/li\u003e\n    \u003cli\u003ePower headroom above rated maximum load\u003c\/li\u003e\n    \u003cli\u003eCompatible with: PEQ1R, PEQ2R, PAFOUR, PAFOUR Plus\u003c\/li\u003e\n    \u003cli\u003eCompact form factor — no 19\" rack slot required\u003c\/li\u003e\n    \u003cli\u003eRequires 5' DC Main Cable to connect to first module (sold separately)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: compact DC power supply for Wunder Audio 19\" rack modules\u003c\/li\u003e\n    \u003cli\u003eOutput voltages: 24V DC, 48V DC\u003c\/li\u003e\n    \u003cli\u003eMaximum PEQ2R modules: 4\u003c\/li\u003e\n    \u003cli\u003eMaximum PAFOUR \/ PAFOUR Plus units: 2\u003c\/li\u003e\n    \u003cli\u003eMaximum channel count: 8\u003c\/li\u003e\n    \u003cli\u003eIndicators: separate LEDs for 24V DC and 48V DC\u003c\/li\u003e\n    \u003cli\u003eDimensions: 2\" x 3¼\" x 6½\" (51 x 83 x 165 mm)\u003c\/li\u003e\n    \u003cli\u003eWeight: 3 lbs (approx. 1.4 kg)\u003c\/li\u003e\n    \u003cli\u003eRequired accessories: 5' DC Main Cable (sold separately), 1' daisy-chain cable per additional module (sold separately)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":53670070059345,"sku":"41731","price":327.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WunderAudioBlueBoxPSU.jpg?v=1778416609"},{"product_id":"wunder-audio-black-box-psu","title":"Wunder Audio Black Box PSU","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eWunder Audio Black Box PSU\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cp\u003eThe Black Box PSU is the high-capacity power supply for Wunder Audio's 19\" rack module ecosystem — the larger of the two available PSU options and the correct choice for any studio running a substantial rack section. It powers up to 12 PEQ2R modules or up to 4 PAFOUR units from a single unit, covering configurations of up to 16 channels of Wunder Audio preamp and EQ without requiring a second power supply.\u003c\/p\u003e\n\n  \u003ch3\u003ePower Headroom for Large Rack Configurations\u003c\/h3\u003e\n  \u003cp\u003eThe Black Box delivers 24V DC for the audio circuitry and 48V DC for phantom power, with separate indicator LEDs for each voltage rail running independently. At a glance, the engineer knows whether both supplies are live — no guesswork when troubleshooting a rack. The unit is designed with significant headroom above its rated maximum load: at 12 PEQ2R modules or 4 PAFOUR units, it is not working at its ceiling, which keeps voltage stable and noise low across the full chain. The first module in the rack connects via the 5' DC Main Cable (sold separately); each subsequent module chains off the previous one via the 1' daisy-chain cable (sold separately).\u003c\/p\u003e\n\n  \u003ch3\u003eScalability Within the Wunder Audio Rack Ecosystem\u003c\/h3\u003e\n  \u003cp\u003eThe Black Box supports any combination of compatible 19\" modules in a single power chain — PEQ1R, PEQ2R, PAFOUR, and PAFOUR Plus can coexist in any order within the same DC run. Per Wunder Audio's PAFOUR Plus documentation, up to 8 PAFOUR Plus units can be daisy-chained from one Black Box PSU, totaling 32 channels of preamp from a single power source. For smaller setups — up to 4 PEQ2R modules or 2 PAFOUR units — the Blue Box PSU is the more compact alternative. Wherever a rack has more than a few modules or is expected to grow, the Black Box is the appropriate foundation.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003ePowers up to 12 PEQ2R modules or up to 4 PAFOUR units (up to 16 channels) from a single PSU\u003c\/li\u003e\n    \u003cli\u003eTwo independent output voltages: 24V DC (audio) and 48V DC (phantom power)\u003c\/li\u003e\n    \u003cli\u003eSeparate indicator LEDs for 24V DC and 48V DC rails\u003c\/li\u003e\n    \u003cli\u003eSignificant power headroom at maximum rated load\u003c\/li\u003e\n    \u003cli\u003eCompatible with: PEQ1R, PEQ2R, PAFOUR, PAFOUR Plus\u003c\/li\u003e\n    \u003cli\u003eSupports daisy-chaining up to 8x PAFOUR Plus (32 channels of preamp)\u003c\/li\u003e\n    \u003cli\u003eRequires 5' DC Main Cable to connect to first module (sold separately)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: DC power supply for Wunder Audio 19\" rack modules\u003c\/li\u003e\n    \u003cli\u003eOutput voltages: 24V DC, 48V DC\u003c\/li\u003e\n    \u003cli\u003eMaximum PEQ2R modules: 12\u003c\/li\u003e\n    \u003cli\u003eMaximum PAFOUR \/ PAFOUR Plus units: 4 (or up to 8x PAFOUR Plus in daisy-chain)\u003c\/li\u003e\n    \u003cli\u003eMaximum channel count: up to 16 (PEQ2R\/PAFOUR) or up to 32 (PAFOUR Plus)\u003c\/li\u003e\n    \u003cli\u003eIndicators: separate LEDs for 24V DC and 48V DC\u003c\/li\u003e\n    \u003cli\u003eDimensions: 5\" x 6\" x 9\" (127 x 152 x 229 mm)\u003c\/li\u003e\n    \u003cli\u003eWeight: 12 lbs (approx. 5.4 kg)\u003c\/li\u003e\n    \u003cli\u003eRequired accessories: 5' DC Main Cable (sold separately), 1' daisy-chain cable per additional module (sold separately)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":53670070092113,"sku":"41732","price":437.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WunderAudioBlackBoxPSU.jpg?v=1778416596"},{"product_id":"wunder-audio-5-dc-main-cable","title":"Wunder Audio 5' DC main cable","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eWunder Audio 5' DC Main Cable\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cp\u003eThe 5-foot DC Main Cable is the required connection between a Wunder Audio PSU and the first 19\" rack module in any Blue Box or Black Box-powered setup. Without it, no DC voltage reaches the modules — it is not an optional accessory but a mandatory component for any rack configuration using PEQ1R, PEQ2R, PAFOUR, or PAFOUR Plus units. This is the cable that initializes the entire power chain.\u003c\/p\u003e\n\n  \u003ch3\u003eFirst Link in the DC Power Chain\u003c\/h3\u003e\n  \u003cp\u003eThe DC Main Cable runs from the DC output of the Blue Box or Black Box PSU directly into the DC input of the first 19\" rack module. The 5-foot length gives enough reach to handle standard rack configurations where the PSU and modules may sit in different rack bays or at separate heights within the same rack. For multi-module setups, each subsequent unit in the chain connects via the 1-foot daisy-chain cable (sold separately) — but the DC Main is always the first and only cable that originates at the PSU itself.\u003c\/p\u003e\n\n  \u003ch3\u003eCompatibility and System Context\u003c\/h3\u003e\n  \u003cp\u003eThe cable is compatible with all Wunder Audio 19\" rack modules powered by the Blue Box or Black Box PSU. The Black Box supports up to 12 PEQ2R modules or up to 4 PAFOUR units; the Blue Box covers up to 4 PEQ2R or 2 PAFOUR units. At any scale within those configurations, the 5' DC Main Cable is the starting point. The PAFOUR Plus documentation explicitly lists this cable as a required purchase alongside the PSU itself, making it a practical necessity to order alongside any new Wunder Audio rack module.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eRequired DC main cable for all Wunder Audio 19\" rack module configurations\u003c\/li\u003e\n    \u003cli\u003eConnects PSU DC output (Blue Box \/ Black Box) to the DC input of the first rack module\u003c\/li\u003e\n    \u003cli\u003eLength: 5 feet (approx. 152 cm)\u003c\/li\u003e\n    \u003cli\u003eCompatible with: PEQ1R, PEQ2R, PAFOUR, PAFOUR Plus\u003c\/li\u003e\n    \u003cli\u003eMandatory for any Blue Box or Black Box PSU-based setup\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: DC Main power cable\u003c\/li\u003e\n    \u003cli\u003eLength: 5 feet (approx. 152 cm)\u003c\/li\u003e\n    \u003cli\u003eFunction: PSU (Blue Box \/ Black Box) to first 19\" rack module DC input\u003c\/li\u003e\n    \u003cli\u003eCompatible modules: PEQ1R, PEQ2R, PAFOUR, PAFOUR Plus\u003c\/li\u003e\n    \u003cli\u003eRequired for operation: yes\u003c\/li\u003e\n    \u003cli\u003eMulti-module expansion: additional units chained via 1' daisy-chain cable (sold separately)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":53670070288721,"sku":"41733","price":35.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WunderAudio5_DCmaincable_bb1f3851-4e95-4bb7-ad7a-a615d3efd36e.jpg?v=1778416584"},{"product_id":"wunder-audio-1-dc-daisy-chain-cable","title":"Wunder Audio 1' DC daisy chain cable","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eWunder Audio 1' DC Daisy Chain Cable\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cp\u003eThe 1-foot DC Daisy Chain Cable is the link that extends a single Blue Box or Black Box PSU across multiple 19\" rack modules in a Wunder Audio setup. Once the 5' DC Main Cable connects the PSU to the first module, every additional unit in the rack — PEQ1R, PEQ2R, PAFOUR, or PAFOUR Plus — requires one daisy-chain cable to receive and pass power down the line. One cable per module junction, no exceptions.\u003c\/p\u003e\n\n  \u003ch3\u003eExtending One PSU Across Multiple Rack Modules\u003c\/h3\u003e\n  \u003cp\u003eThe daisy-chain cable plugs into the DC output of one 19\" rack module and into the DC input of the next, allowing a single PSU to power the full rack section without additional power supplies. The Black Box PSU handles up to 12 PEQ2R modules or up to 4 PAFOUR units in a single chain; the Blue Box covers up to 4 PEQ2R or 2 PAFOUR units. The 1-foot length is intentional — it matches the standard spacing between adjacent 19\" rack modules, keeping the cable run tight against the rear panel without slack or excess looping behind the rack.\u003c\/p\u003e\n\n  \u003ch3\u003eSystem Compatibility and Chain Logic\u003c\/h3\u003e\n  \u003cp\u003eThe cable is compatible with any combination of Wunder Audio 19\" rack modules powered by Blue Box or Black Box PSU: PEQ1R, PEQ2R, PAFOUR, and PAFOUR Plus can be mixed in any order within the same power chain. The first module always connects to the PSU via the 5' DC Main Cable (sold separately); every subsequent module requires its own daisy-chain. A three-module rack configuration needs two daisy-chain cables — one between modules one and two, one between modules two and three.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eDC power daisy-chain cable for linking multiple Wunder Audio 19\" rack modules from a single PSU\u003c\/li\u003e\n    \u003cli\u003eConnects DC output of one module to DC input of the next\u003c\/li\u003e\n    \u003cli\u003eLength: 1 foot (approx. 30 cm) — sized for standard inter-module spacing in a 19\" rack\u003c\/li\u003e\n    \u003cli\u003eCompatible with: PEQ1R, PEQ2R, PAFOUR, PAFOUR Plus\u003c\/li\u003e\n    \u003cli\u003eWorks with: Blue Box PSU, Black Box PSU\u003c\/li\u003e\n    \u003cli\u003eRequired for every module beyond the first in a multi-module configuration\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: DC daisy-chain power cable\u003c\/li\u003e\n    \u003cli\u003eLength: 1 foot (approx. 30 cm)\u003c\/li\u003e\n    \u003cli\u003eFunction: module DC output to next module DC input\u003c\/li\u003e\n    \u003cli\u003eCompatibility: PEQ1R, PEQ2R, PAFOUR, PAFOUR Plus\u003c\/li\u003e\n    \u003cli\u003eRequired first cable: 5' DC Main (sold separately)\u003c\/li\u003e\n    \u003cli\u003eMaximum chain capacity: up to 12x PEQ2R or up to 4x PAFOUR (Black Box PSU)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":53670070976849,"sku":"41734","price":31.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WunderAudio1_DCdaisychaincable.jpg?v=1778416576"},{"product_id":"wunder-audio-wunder-audio-wunderbar-console-8-channel","title":"Wunder Audio Wunder Audio Wunderbar Console - 8 channel, 16 monitors, 1 Powerbar PSU, Exquisite Trim","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eWunder Audio Wunderbar Console — 8 Channel, 16 Monitors, 1 Powerbar PSU, Exquisite Trim\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cp\u003eThe 8-channel Wunderbar with 16 monitor paths is the entry point into the Wunderbar family — and a complete high-end console in its own right, not a stripped-down version of the larger frames. The full Wunderbahn architecture, discrete Class-A signal path, and transformer balancing at every stage of the circuit are identical to the 56-channel flagship. For a project studio, a composer working with live players, or an engineer building a hybrid analog\/DAW environment, 8 channels of this caliber redefine the character of the entire signal chain.\u003c\/p\u003e\n\n  \u003ch3\u003eWunderbahn in Its Purest Form\u003c\/h3\u003e\n  \u003cp\u003eThe Fully Balanced Busing Scheme buffers ground out of the audio path entirely, delivering a direct increase in dynamic range and a reduction in residual noise. The stereo bus section offers three independent amplifier flavors: Wunder, Neve 1272, and API 312. Each operates as a standalone mix bus, or all three can be cascaded simultaneously with proportions controlled by six master faders in the center section — a capability unique across the entire console market at any channel count. All 8 channels carry transformer-balanced Direct Outputs and Insert Send\/Return loops. The 1046 Routing Modules are fully transformer-balanced Class-A Discrete, with a flip-able monitor fader, six group buses with illuminated switches, four aux sends switchable pre\/post, Pan Defeat, 48V phantom power, and Opto Silent Mute per channel.\u003c\/p\u003e\n\n  \u003ch3\u003eD-Sub Architecture and Hybrid Studio Integration\u003c\/h3\u003e\n  \u003cp\u003eIn Super D format, all connections on the 8-channel section run on D-Sub 25 connectors: Mic Input, Line Input, Direct Output, Routing Module Input, Insert Send, Insert Return, DAW Input, and DAW Mult. This wiring layout integrates the console with a patchbay and DAW environment via a single cable harness per section — a significant advantage in smaller rooms where rear-of-desk cable management directly affects workflow speed. The channel strip EQ is configurable as PEQ2 or PEQ4 four-band modules. Exquisite Trim covers the end caps, meter bridge, and armrest in 1.5\" solid hardwood (Oak, Walnut, or Roasted Coffee Bean Birch) with an inlaid logo, finished with Black or Brown Top Grain leather. Every unit is hand-built to the client's exact specifications.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eWunderbahn system: three independent stereo buses — Wunder, Neve 1272, API 312 — separable or cascaded\u003c\/li\u003e\n    \u003cli\u003e8 input channels, 16 monitor paths\u003c\/li\u003e\n    \u003cli\u003e1x Powerbar PSU with isolated DC voltage and audio paths\u003c\/li\u003e\n    \u003cli\u003ePEQ2 or PEQ4 four-band EQ modules — configured to order\u003c\/li\u003e\n    \u003cli\u003eTransformer-balanced Direct Outputs and Insert loops on every channel\u003c\/li\u003e\n    \u003cli\u003e1046 Routing Modules: Class-A Discrete, 6 group buses, 4 pre\/post auxes, Pan Defeat, 48V phantom, Opto Silent Mute\u003c\/li\u003e\n    \u003cli\u003eFlip-able monitor fader on every channel strip\u003c\/li\u003e\n    \u003cli\u003eD-Sub 25 connectors on all 8-channel section I\/O (Mic In, Line In, Direct Out, Insert, DAW In, DAW Mult)\u003c\/li\u003e\n    \u003cli\u003eExquisite Trim: 1.5\" solid hardwood, Top Grain leather armrest\u003c\/li\u003e\n    \u003cli\u003eFully custom hand-built to order\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eInput channels: 8\u003c\/li\u003e\n    \u003cli\u003eMonitor paths: 16\u003c\/li\u003e\n    \u003cli\u003ePower supply: 1x Powerbar PSU\u003c\/li\u003e\n    \u003cli\u003eSignal path: fully discrete Class-A, transformer balanced throughout\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 8 Hz – 120+ kHz (flat)\u003c\/li\u003e\n    \u003cli\u003eSignal-to-noise ratio: better than 105 dB\u003c\/li\u003e\n    \u003cli\u003eStereo buses: 3 (Wunder, 1272, 312)\u003c\/li\u003e\n    \u003cli\u003eAux sends: 4 (pre\/post switchable)\u003c\/li\u003e\n    \u003cli\u003eGroup buses: 6 (illuminated switches)\u003c\/li\u003e\n    \u003cli\u003eSection connectors: D-Sub 25\u003c\/li\u003e\n    \u003cli\u003eTransformers: Western Electric 618-style, NICO core (Ni\/Fe\/Co)\u003c\/li\u003e\n    \u003cli\u003ePotentiometers: Vishay audio-grade conductive plastic (1,000,000 cycle rated)\u003c\/li\u003e\n    \u003cli\u003eSwitches: custom Greyhill\u003c\/li\u003e\n    \u003cli\u003eTrim: 1.5\" solid hardwood (Oak \/ Walnut \/ Roasted Coffee Bean Birch), Top Grain leather\u003c\/li\u003e\n    \u003cli\u003eOptions: internal patchbay (8x 19\"), Cinema Display section 27\"\/32\", Insert Enable\/Defeat panel, Stereo Bus Inserts, Black Hammerite stand\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":53670071042385,"sku":"41735","price":30511.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WunderAudioWunderAudioWunderbarConsole_c25411c7-46f9-4b9e-9b0b-f9b3bcdeecdc.jpg?v=1778416552"},{"product_id":"wunder-audio-wunder-audio-wunderbar-console-16-channel","title":"Wunder Audio Wunder Audio Wunderbar Console - 16 channel, 24 monitors, 1 Powerbar PSU, Exquisite Trim","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eWunder Audio Wunderbar Console — 16 Channel, 24 Monitors, 1 Powerbar PSU, Exquisite Trim\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cp\u003eThe 16-channel Wunderbar with 24 monitor paths is the smallest configuration in the lineup that still delivers the complete Wunderbahn architecture — three independent stereo buses, fully discrete Class-A signal path, and transformer balancing at every point in the circuit. A single Powerbar PSU runs this frame with fully isolated DC voltage and audio paths. For project studios and smaller commercial rooms where real estate behind the desk is limited, this configuration keeps the full technical and sonic capability of the larger frames intact, scaled to a manageable physical footprint.\u003c\/p\u003e\n\n  \u003ch3\u003eComplete Wunderbahn Architecture at Compact Scale\u003c\/h3\u003e\n  \u003cp\u003eRegardless of frame size, every Wunderbar shares the same core summing design: the Fully Balanced Busing Scheme buffers ground out of the audio path, delivering a direct increase in dynamic range and a reduction in residual noise. The stereo bus section provides three independent amplifier flavors — Wunder, Neve 1272, and API 312 — each usable in isolation or cascaded simultaneously, with proportions adjusted by six master faders in the center section. All 16 channels carry transformer-balanced Direct Outputs and Insert Send\/Return loops. The 1046 Routing Modules are fully transformer-balanced Class-A Discrete, with a flip-able monitor fader, six group buses with illuminated switches, four aux sends switchable pre\/post, Pan Defeat, 48V phantom power, and Opto Silent Mute per channel.\u003c\/p\u003e\n\n  \u003ch3\u003eRight-Sized for Project and Boutique Commercial Rooms\u003c\/h3\u003e\n  \u003cp\u003eSixteen input channels and 24 monitor paths cover a full standard tracking setup — drums, bass, guitars, keys, and a lead vocal — without requiring submixing upstream of the console. The channel strip EQ is configurable as PEQ2 or PEQ4 four-band modules, or a mixed combination of both within the same frame. Exquisite Trim covers the end caps, meter bridge, and armrest in 1.5\" solid hardwood (Oak, Walnut, or Roasted Coffee Bean Birch) with an inlaid logo, finished with Black or Brown Top Grain leather along the full armrest. Every unit is assembled by hand to the client's exact specifications by a team of over a dozen specialists, with a 50% non-refundable deposit required to initiate the build.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eWunderbahn system: three independent stereo buses — Wunder, Neve 1272, API 312 — separable or cascaded\u003c\/li\u003e\n    \u003cli\u003e16 input channels, 24 monitor paths\u003c\/li\u003e\n    \u003cli\u003e1x Powerbar PSU with isolated DC voltage and audio paths\u003c\/li\u003e\n    \u003cli\u003ePEQ2 or PEQ4 four-band EQ modules — mixed configurations supported within one frame\u003c\/li\u003e\n    \u003cli\u003eTransformer-balanced Direct Outputs and Insert loops on every channel\u003c\/li\u003e\n    \u003cli\u003e1046 Routing Modules: Class-A Discrete, 6 group buses, 4 pre\/post auxes, Pan Defeat, 48V phantom, Opto Silent Mute\u003c\/li\u003e\n    \u003cli\u003eFlip-able monitor fader on every channel strip\u003c\/li\u003e\n    \u003cli\u003eExquisite Trim: 1.5\" solid hardwood, Top Grain leather armrest\u003c\/li\u003e\n    \u003cli\u003eFully custom hand-built to order\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eInput channels: 16\u003c\/li\u003e\n    \u003cli\u003eMonitor paths: 24\u003c\/li\u003e\n    \u003cli\u003ePower supply: 1x Powerbar PSU\u003c\/li\u003e\n    \u003cli\u003eSignal path: fully discrete Class-A, transformer balanced throughout\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 8 Hz – 120+ kHz (flat)\u003c\/li\u003e\n    \u003cli\u003eSignal-to-noise ratio: better than 105 dB\u003c\/li\u003e\n    \u003cli\u003eStereo buses: 3 (Wunder, 1272, 312)\u003c\/li\u003e\n    \u003cli\u003eAux sends: 4 (pre\/post switchable)\u003c\/li\u003e\n    \u003cli\u003eGroup buses: 6 (illuminated switches)\u003c\/li\u003e\n    \u003cli\u003eTransformers: Western Electric 618-style, NICO core (Ni\/Fe\/Co)\u003c\/li\u003e\n    \u003cli\u003ePotentiometers: Vishay audio-grade conductive plastic (1,000,000 cycle rated)\u003c\/li\u003e\n    \u003cli\u003eSwitches: custom Greyhill\u003c\/li\u003e\n    \u003cli\u003eTrim: 1.5\" solid hardwood (Oak \/ Walnut \/ Roasted Coffee Bean Birch), Top Grain leather\u003c\/li\u003e\n    \u003cli\u003eOptions: internal patchbay (8x 19\"), Cinema Display section 27\"\/32\", Insert Enable\/Defeat panel, Stereo Bus Inserts, Black Hammerite stand\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":53670071140689,"sku":"41736","price":56745.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WunderAudioWunderAudioWunderbarConsole_6e751aa3-2b54-4432-a10b-689f57fb30a7.jpg?v=1778416540"},{"product_id":"wunder-audio-wunder-audio-wunderbar-console-32-channel","title":"Wunder Audio Wunder Audio Wunderbar Console - 32 channel, 40 monitors, 1 Powerbar PSU, Exquisite Trim","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eWunder Audio Wunderbar Console — 32 Channel, 40 Monitors, 1 Powerbar PSU, Exquisite Trim\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cp\u003eThe 32-channel Wunderbar with 40 monitor paths sits at the practical center of the lineup — large enough to handle serious multitrack sessions without splitting groups or bouncing channels, yet compact enough for a well-designed control room without the footprint of a 48- or 56-channel frame. A single Powerbar PSU handles this configuration with fully isolated DC voltage and audio paths, and the 40-monitor count gives engineers complete inline flexibility throughout tracking and overdub sessions. Every unit is hand-built to order, with a fully discrete Class-A signal path and transformer balancing at every stage.\u003c\/p\u003e\n\n  \u003ch3\u003eWunderbahn Bus Architecture and Signal Routing\u003c\/h3\u003e\n  \u003cp\u003eThe Fully Balanced Busing Scheme removes ground from the audio path entirely, resulting in a measurable increase in dynamic range and a lower noise floor — without softening transients or coloring the dry signal. The stereo bus section, the Wunderbahn, provides three independent amplifier flavors: Wunder, Neve 1272, and API 312. Each operates as a standalone mix bus, or all three can be cascaded simultaneously with proportions set by six master faders in the center section. Every one of the 32 channels carries transformer-balanced Direct Outputs and Insert Send\/Return loops. The 1046 Routing Modules are fully transformer-balanced Class-A Discrete, featuring a flip-able monitor fader, six group buses with illuminated switches, four aux sends switchable pre\/post, Pan Defeat, 48V phantom power, and Opto Silent Mute.\u003c\/p\u003e\n\n  \u003ch3\u003eD-Sub Connectivity and DAW Integration\u003c\/h3\u003e\n  \u003cp\u003eIn Super D format, all connections across each eight-channel section run on D-Sub 25 connectors: Mic Input, Line Input, Direct Output, Routing Module Input, Insert Send, Insert Return, DAW Input, and DAW Mult. This wiring architecture keeps the back of the console clean and makes hybrid analog\/DAW workflows significantly faster to patch and reconfigure. Channel strip EQ is available as PEQ2 or PEQ4 four-band modules, with mixed configurations supported within a single frame. The Exquisite Trim package covers the end caps, meter bridge, and armrest: 1.5\" solid hardwood (Oak, Walnut, or Roasted Coffee Bean Birch) with an inlaid logo, paired with Black or Brown Top Grain leather along the full armrest length.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eWunderbahn system: three independent stereo buses — Wunder, Neve 1272, API 312 — separable or cascaded\u003c\/li\u003e\n    \u003cli\u003e32 input channels, 40 monitor paths\u003c\/li\u003e\n    \u003cli\u003e1x Powerbar PSU with isolated DC voltage and audio paths\u003c\/li\u003e\n    \u003cli\u003ePEQ2 or PEQ4 four-band EQ modules — mixed configurations supported within one frame\u003c\/li\u003e\n    \u003cli\u003eTransformer-balanced Direct Outputs and Insert loops on every channel\u003c\/li\u003e\n    \u003cli\u003e1046 Routing Modules: Class-A Discrete, 6 group buses, 4 pre\/post auxes, Pan Defeat, 48V phantom, Opto Silent Mute\u003c\/li\u003e\n    \u003cli\u003eFlip-able monitor fader on every channel strip\u003c\/li\u003e\n    \u003cli\u003e8-channel sections: D-Sub 25 connectors on all I\/O (Mic In, Line In, Direct Out, Insert, DAW In, DAW Mult)\u003c\/li\u003e\n    \u003cli\u003eExquisite Trim: 1.5\" solid hardwood, Top Grain leather armrest\u003c\/li\u003e\n    \u003cli\u003eFully custom hand-built to order\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eInput channels: 32\u003c\/li\u003e\n    \u003cli\u003eMonitor paths: 40\u003c\/li\u003e\n    \u003cli\u003ePower supply: 1x Powerbar PSU\u003c\/li\u003e\n    \u003cli\u003eSignal path: fully discrete Class-A, transformer balanced throughout\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 8 Hz – 120+ kHz (flat)\u003c\/li\u003e\n    \u003cli\u003eSignal-to-noise ratio: better than 105 dB\u003c\/li\u003e\n    \u003cli\u003eStereo buses: 3 (Wunder, 1272, 312)\u003c\/li\u003e\n    \u003cli\u003eAux sends: 4 (pre\/post switchable)\u003c\/li\u003e\n    \u003cli\u003eGroup buses: 6 (illuminated switches)\u003c\/li\u003e\n    \u003cli\u003e8-channel section connectors: D-Sub 25\u003c\/li\u003e\n    \u003cli\u003eTransformers: Western Electric 618-style, NICO core (Ni\/Fe\/Co)\u003c\/li\u003e\n    \u003cli\u003ePotentiometers: Vishay audio-grade conductive plastic (1,000,000 cycle rated)\u003c\/li\u003e\n    \u003cli\u003eSwitches: custom Greyhill\u003c\/li\u003e\n    \u003cli\u003eTrim: 1.5\" solid hardwood (Oak \/ Walnut \/ Roasted Coffee Bean Birch), Top Grain leather\u003c\/li\u003e\n    \u003cli\u003eOptions: internal patchbay (8x 19\"), Cinema Display section 27\"\/32\", Insert Enable\/Defeat panel, Stereo Bus Inserts, Black Hammerite stand\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":53670071107921,"sku":"41737","price":112617.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WunderAudioWunderAudioWunderbarConsole_a64b8e86-fb06-4fd8-b7f1-007ba44ca503.jpg?v=1778416516"},{"product_id":"wunder-audio-wunder-audio-wunderbar-console-40-channel","title":"Wunder Audio Wunder Audio Wunderbar Console - 40 channel, 48 monitors, 2 Powerbar PSU, Exquisite Trim","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eWunder Audio Wunderbar Console — 40 Channel, 48 Monitors, 2x Powerbar PSU, Exquisite Trim\u003c\/strong\u003e\u003c\/p\u003e\n\n  \u003cp\u003eThe Wunderbar is a fully custom, hand-built analog console centered around one architectural decision that no other classic-format desk offers: the Wunderbahn — three independent stereo bus flavors derived from Wunder Audio's own circuit, the Neve 1272, and the API 312. This 40-channel configuration with 48 monitor paths and dual Powerbar PSU is sized for serious tracking rooms and extended mix sessions where power stability and monitor depth are non-negotiable.\u003c\/p\u003e\n\n  \u003ch3\u003eThree Stereo Buses and Fully Balanced Signal Architecture\u003c\/h3\u003e\n  \u003cp\u003eThe Fully Balanced Busing Scheme buffers ground out of the audio path entirely, which translates directly into increased dynamic range and reduced noise floor across all 40 channels. Every channel carries transformer-balanced Direct Outputs and Insert Send\/Return loops. The three stereo bus amplifiers — Wunder, 1272, and 312 — operate independently or cascade into each other, letting you route drums through the API character while vocals run through the Neve texture simultaneously. The 1046 Routing Modules are fully transformer-balanced Class-A Discrete, featuring a channel fader that flips with the monitor fader, six group buses with illuminated switches, four aux sends switchable pre\/post, Pan Defeat, 48V phantom, and Opto Silent Mute on every channel.\u003c\/p\u003e\n\n  \u003ch3\u003eDual PSU Headroom and Exquisite Build\u003c\/h3\u003e\n  \u003cp\u003eTwo independent Powerbar PSUs provide isolated DC voltage and audio paths — essential when all 40 channels run simultaneously at full load. The Exquisite Trim package means 1.5\" solid hardwood side panels and meter bridge (Oak, Walnut, or Roasted Coffee Bean Birch) with inlaid logo, paired with a Black or Brown Top Grain leather armrest. The console is assembled by a team of over a dozen specialists — cable builders, machinists, electronic engineers, and cabinetmakers — all working to the client's exact specifications. Channel strip EQ is configured with PEQ2 or PEQ4 four-band modules, or any combination of both within the same frame.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eWunderbahn system: three independent stereo buses (Wunder, Neve 1272, API 312) — separable or cascaded\u003c\/li\u003e\n    \u003cli\u003e40 input channels, 48 monitor paths\u003c\/li\u003e\n    \u003cli\u003eDual 2x Powerbar PSU with isolated DC voltage and audio paths\u003c\/li\u003e\n    \u003cli\u003ePEQ4 four-band EQ or PEQ2 modules — mixed configurations supported\u003c\/li\u003e\n    \u003cli\u003eTransformer-balanced Direct Outputs and Insert loops on every channel\u003c\/li\u003e\n    \u003cli\u003e1046 Routing Modules: Class-A Discrete, 6 group buses, 4 pre\/post auxes, Pan Defeat, 48V phantom, Opto Silent Mute\u003c\/li\u003e\n    \u003cli\u003eFlip-able monitor fader on every channel strip\u003c\/li\u003e\n    \u003cli\u003eExquisite Trim: 1.5\" solid hardwood, Top Grain leather armrest\u003c\/li\u003e\n    \u003cli\u003eFully custom hand-built to order (50% non-refundable deposit required)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eInput channels: 40\u003c\/li\u003e\n    \u003cli\u003eMonitor paths: 48\u003c\/li\u003e\n    \u003cli\u003ePower supply: 2x Powerbar PSU\u003c\/li\u003e\n    \u003cli\u003eSignal path: fully discrete Class-A, transformer balanced throughout\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 8 Hz – 120+ kHz (flat)\u003c\/li\u003e\n    \u003cli\u003eSignal-to-noise ratio: better than 105 dB\u003c\/li\u003e\n    \u003cli\u003eStereo buses: 3 (Wunder, 1272, 312)\u003c\/li\u003e\n    \u003cli\u003eAux sends: 4 (pre\/post switchable)\u003c\/li\u003e\n    \u003cli\u003eGroup buses: 6 (illuminated switches)\u003c\/li\u003e\n    \u003cli\u003eTransformers: Western Electric 618-style, NICO core (Ni\/Fe\/Co)\u003c\/li\u003e\n    \u003cli\u003ePotentiometers: Vishay audio-grade conductive plastic (1,000,000 cycle rated)\u003c\/li\u003e\n    \u003cli\u003eSwitches: custom Greyhill\u003c\/li\u003e\n    \u003cli\u003eTrim: 1.5\" solid hardwood (Oak \/ Walnut \/ Roasted Coffee Bean Birch), Top Grain leather\u003c\/li\u003e\n    \u003cli\u003eOptions: internal patchbay (8x 19\"), Cinema Display section 27\"\/32\", Insert Enable\/Defeat panel, Stereo Bus Inserts, Black Hammerite stand\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Wunder Audio","offers":[{"title":"Default Title","offer_id":53670071173457,"sku":"41738","price":140335.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/WunderAudioWunderAudioWunderbarConsole.jpg?v=1778416505"}],"url":"https:\/\/wrdtunes.com\/en-fr\/collections\/wunder-audio.oembed","provider":"Wired Tunes","version":"1.0","type":"link"}