{"title":"Shure","description":"","products":[{"product_id":"shure-axient-ad4de-a-dual-ad-470-636mhz","title":"Shure Axient AD4DE-A Dual AD (470-636MHz)","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eShure Axient AD4DE-A Dual Receiver (470-636 MHz)\u003c\/strong\u003e – dual-channel digital wireless receiver with Quadversity technology, designed for professional live and broadcast applications. Provides reliable transmission up to 300 feet, supporting up to 47 simultaneous channels with advanced RF spectrum management. Ideal for stages, studios, and high-demand events. Compact rackmount enclosure (483 x 44 x 271 mm, 2.8 kg) with color display and Ethernet networking.\u003c\/p\u003e\n\u003cp\u003eAD4DE-A features AES3 and analog I\/O, 24-bit\/48 kHz conversion. Functions: ShowLink for remote transmitter control, Networking for frequency coordination, Diversity with 4 antennas for stability. Supports up to 2 transmitters, automatic switching, RF monitoring. Redundant power, compatible with ADX transmitters.\u003c\/p\u003e\n\u003cp\u003eAs part of Axient Digital series, delivers crystal-clear sound without dropouts, ready for mission-critical use without compromise.\u003c\/p\u003e\n\u003ch3\u003eMAIN FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual-channel receiver with Quadversity (4 antennas) for 300 ft range\u003c\/li\u003e\n\u003cli\u003eFrequency: A-band 470-636 MHz, up to 47 channels\u003c\/li\u003e\n\u003cli\u003eShowLink: remote transmitter control via RF\u003c\/li\u003e\n\u003cli\u003eNetworking: Ethernet for frequency coordination\u003c\/li\u003e\n\u003cli\u003eInputs\/Outputs: 2x XLR analog, 2x AES3, Dante optional\u003c\/li\u003e\n\u003cli\u003eColor display with RF\/audio metering\u003c\/li\u003e\n\u003cli\u003eRedundant power, automatic switching\u003c\/li\u003e\n\u003cli\u003e1U rackmount, portable with ears\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency\u003c\/strong\u003e: 470-636 MHz (A-band)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannels\u003c\/strong\u003e: Up to 47 simultaneous\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Range\u003c\/strong\u003e: Up to 100 m (300 feet)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eA\/D Conversion\u003c\/strong\u003e: 24-bit\/48 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs\u003c\/strong\u003e: 2x XLR female (mic\/line), BNC RF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs\u003c\/strong\u003e: 2x XLR male (line), AES3 XLR, Ethernet RJ45\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response\u003c\/strong\u003e: 20 Hz–20 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDynamic Range\u003c\/strong\u003e: 120 dB (A-weighted)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD + N\u003c\/strong\u003e: \u0026lt; 0.002% @ 1 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply\u003c\/strong\u003e: 100-240 V AC, redundant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (H × W × D)\u003c\/strong\u003e: 44 x 483 x 271 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 2.8 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded\u003c\/strong\u003e: AD4DE-A, rack ears, BNC cables, power cord\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Code\u003c\/strong\u003e: SHU-AD4DE-A\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SHURE","offers":[{"title":"Default Title","offer_id":47796828766545,"sku":"53517","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/ShureAxientAD4DE-ADualAD_470-636MHz_1.jpg?v=1759257806"},{"product_id":"shure-sm57-lce","title":"SHURE SM57-LCE","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eShure SM57-LCE\u003c\/strong\u003e is a cardioid dynamic instrument microphone with over five decades of consistent use on stages and in studios worldwide. The LCE variant includes a 5\/8\"-to-3\/8\" thread adapter for European stands, a swivel mount, and a zippered pouch — everything needed for immediate deployment without sourcing additional hardware.\n\n\u003ch3\u003eHigh SPL handling without tonal compromise\u003c\/h3\u003e\nThe SM57-LCE absorbs sound pressure levels that appear directly in front of a guitar amp speaker, over a snare, or at the bell of a brass instrument — without distortion or capsule saturation. As a dynamic transducer, it requires no phantom power and does not compress or clip at the transient peaks where a condenser would start to struggle. In practice, that means less manual compression needed in the recording chain or on the live console, and a more accurate representation of the instrument's attack character.\n\n\u003ch3\u003eA frequency curve shaped around instruments, not test tones\u003c\/h3\u003e\nThe SM57's response is deliberately contoured: a presence rise in the upper midrange lifts the attack of plucked strings, the snap of a snare, and the cut of cymbals without reaching for EQ. The natural low-end rolloff simultaneously reduces mechanically transmitted rumble from stands and mounts. The cardioid polar pattern rejects off-axis sources, which on a drum session translates to lower bleed between microphones, and in live use to higher gain-before-feedback in monitor-heavy environments. The pneumatic shock-mount system inside the body further attenuates vibrations before they reach the capsule.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic moving-coil transducer — no phantom power required, high SPL tolerance without distortion\u003c\/li\u003e\n\u003cli\u003eCardioid polar pattern with effective rejection of lateral and rear sources\u003c\/li\u003e\n\u003cli\u003eContoured frequency response with upper-midrange presence — instrument clarity without EQ\u003c\/li\u003e\n\u003cli\u003ePneumatic shock-mount system reduces mechanically transmitted noise\u003c\/li\u003e\n\u003cli\u003eDie-cast metal body — withstands stage impact and heavy touring use\u003c\/li\u003e\n\u003cli\u003eLCE variant: 5\/8\" to 3\/8\" thread adapter for European stands included\u003c\/li\u003e\n\u003cli\u003e180° rotating swivel adapter with captive nut integrated into the mic body\u003c\/li\u003e\n\u003cli\u003eIncludes: swivel stand adapter, zippered storage pouch\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransducer type: dynamic (moving coil)\u003c\/li\u003e\n\u003cli\u003ePolar pattern: cardioid\u003c\/li\u003e\n\u003cli\u003eFrequency response: 40 Hz – 15 kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity (1 kHz, open circuit): -56.0 dBV\/Pa (1.6 mV)\u003c\/li\u003e\n\u003cli\u003eOutput impedance: 310 Ω (rated: 150 Ω)\u003c\/li\u003e\n\u003cli\u003eConnector: 3-pin XLR (male)\u003c\/li\u003e\n\u003cli\u003eWeight: 284 g (10 oz)\u003c\/li\u003e\n\u003cli\u003eDimensions: 157 mm (L) × 33 mm (W)\u003c\/li\u003e\n\u003cli\u003eHousing: die-cast metal, dark gray enamel, steel mesh grille\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SHURE","offers":[{"title":"Default Title","offer_id":53815371333969,"sku":"1845","price":127.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/SHURESM57-LCE1.jpg?v=1779264132"},{"product_id":"shure-sm58-lce","title":"SHURE SM58-LCE","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eShure SM58-LCE\u003c\/strong\u003e is a cardioid dynamic vocal microphone that has been the default stage and studio tool for decades. The LCE variant ships without an on\/off switch — one fewer failure point during a live set, and the mic is always live the moment it hits the stand.\n\n\u003ch3\u003eFeedback rejection and source isolation\u003c\/h3\u003e\nThe cardioid pickup pattern aggressively rejects off-axis sound from the sides and rear of the capsule, directly increasing gain-before-feedback headroom. On dense monitor-heavy stages where multiple sources compete for space, that directional selectivity lets you push the vocal in the mix without constantly chasing feedback loops. The pneumatic shock-mount system decouples the capsule from mechanical vibrations transmitted through the stand or the vocalist's grip — what reaches the console is signal, not floor rumble.\n\n\u003ch3\u003eA frequency curve built for vocals, not measurements\u003c\/h3\u003e\nThe SM58's response is deliberately non-linear. The presence rise between 2 kHz and 5 kHz pulls vocal intelligibility forward and cuts through a dense mix without reaching for the console's EQ. Simultaneously, the low-frequency rolloff keeps the proximity effect in check — critical when vocalists work the mic close, as the bass buildup at short distances can quickly cloud the low-mid register. The integrated spherical wind and pop filter handles plosives and breath noise without requiring an external foam cover on stage.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic moving-coil transducer — handles high SPL, no phantom power required\u003c\/li\u003e\n\u003cli\u003eCardioid polar pattern with effective rejection of off-axis sources\u003c\/li\u003e\n\u003cli\u003ePresence peak at 2–5 kHz for vocal clarity and mix penetration\u003c\/li\u003e\n\u003cli\u003ePneumatic shock-mount system reduces handling and mechanical noise\u003c\/li\u003e\n\u003cli\u003eBuilt-in spherical wind and pop filter\u003c\/li\u003e\n\u003cli\u003eEnamel-painted die-cast metal body — road-ready construction\u003c\/li\u003e\n\u003cli\u003eLCE variant: no on\/off switch, eliminating accidental muting on stage\u003c\/li\u003e\n\u003cli\u003eIncludes: zippered storage bag, shatterproof tripod adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransducer type: dynamic (moving coil)\u003c\/li\u003e\n\u003cli\u003ePolar pattern: cardioid\u003c\/li\u003e\n\u003cli\u003eFrequency response: 50 Hz – 15 kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity (1 kHz, open circuit): -56.0 dBV\/Pa (1.6 mV)\u003c\/li\u003e\n\u003cli\u003eOutput impedance: 300 Ω (rated: 150 Ω)\u003c\/li\u003e\n\u003cli\u003eConnector: 3-pin XLR (male)\u003c\/li\u003e\n\u003cli\u003eWeight: 298 g (10.5 oz)\u003c\/li\u003e\n\u003cli\u003eDimensions: 162 mm (L) × 51 mm (W)\u003c\/li\u003e\n\u003cli\u003eHousing: die-cast metal, dark gray enamel, spherical steel mesh grille\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SHURE","offers":[{"title":"Default Title","offer_id":53815373300049,"sku":"1869","price":127.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/SHURESM58-LCE1.jpg?v=1779264122"},{"product_id":"shure-beta52a","title":"Shure BETA52A","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eShure Beta 52A\u003c\/strong\u003e – supercardioid dynamic microphone built specifically for miking a kick drum and other low-frequency sources.\n\nA neodymium magnet delivers a high output level and a strong signal-to-noise ratio, and the 20 Hz to 10,000 Hz frequency response, with a presence boost around 4 kHz, is shaped so kick and bass guitar attack cut through a dense mix without extra correction. A modified supercardioid pattern, symmetrical about the microphone axis, limits bleed from neighboring drum kit elements and adds gain-before-feedback headroom when working close to stage monitors.\n\n\u003ch3\u003eHandling extreme sound pressure inside the kick drum\u003c\/h3\u003e\nA maximum SPL rating of 174 dB lets the mic sit right next to the beater without risking capsule overload, even under the hardest double-pedal hits in metal or rock. An internal pneumatic shock-mount system further isolates the transducer from mechanical vibration transmitted through the shell hoop, cutting impact noise that's unrelated to the actual acoustic signal.\n\n\u003ch3\u003eAn integrated, locking stand mount\u003c\/h3\u003e\nAn integrated mount with an XLR connector and a locking mechanism lets you dial in the mic's angle against the drumhead and hold that position against the strong shocks generated by pedal strikes, without a separate boom arm or extra mounting clip. That speeds up setup inside a kick drum shell, where room for a standard mic stand is limited, and the hardened protective grille along with the enamel-coated die-cast housing hold up to daily load-in and load-out on tour.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModified supercardioid pattern, symmetrical about the axis\u003c\/li\u003e\n\u003cli\u003eNeodymium magnet for high output and strong signal-to-noise ratio\u003c\/li\u003e\n\u003cli\u003eMaximum SPL up to 174 dB\u003c\/li\u003e\n\u003cli\u003eInternal pneumatic shock-mount system\u003c\/li\u003e\n\u003cli\u003eIntegrated, locking stand mount with XLR connector\u003c\/li\u003e\n\u003cli\u003eHardened protective grille and enamel-coated die-cast housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransducer type: dynamic (moving coil)\u003c\/li\u003e\n\u003cli\u003ePolar pattern: supercardioid (modified)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 Hz - 10,000 Hz\u003c\/li\u003e\n\u003cli\u003eSensitivity (1 kHz, open circuit voltage): -64 dBV\/Pa (0.6 mV)\u003c\/li\u003e\n\u003cli\u003eImpedance: rated 150 Ω (actual 45 Ω)\u003c\/li\u003e\n\u003cli\u003eMaximum SPL: 174 dB\u003c\/li\u003e\n\u003cli\u003eConnector: XLR (3-pin, integrated with the stand mount)\u003c\/li\u003e\n\u003cli\u003eMount: integrated, locking dynamic mount\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SHURE","offers":[{"title":"Default Title","offer_id":54207565594961,"sku":"1804","price":260.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/SHUREBETA52A.jpg?v=1783854187"},{"product_id":"shure-beta91a","title":"Shure BETA91A","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eShure Beta 91A\u003c\/strong\u003e – half-cardioid condenser boundary microphone, built for miking a kick drum from the inside as well as piano.\n\nThe boundary design, with an integrated preamp and a full-size XLR connector, removes the need for an external stand - the mic lies flat on a surface inside the kick drum shell, cutting cable clutter when several drum microphones go up at once. The 20 Hz to 20,000 Hz frequency response is shaped for low-frequency work, giving a clear attack while keeping a solid bass foundation. Phantom power in the 11-52V range lets the mic run off a typical preamp or digital console without extra adapters.\n\n\u003ch3\u003eExtreme SPL handling inside the kick drum\u003c\/h3\u003e\nA maximum SPL rating of 155 dB at a 2,500 Ω load lets the mic sit right next to the beater and resonant head without risking capsule overload, even under a very hard pedal strike. Self-noise at 29.5 dBA - lower than the earlier Beta 91 - keeps the signal clean during quieter passages or studio overdubs that need extra dynamic headroom.\n\n\u003ch3\u003eA contour switch that shapes attack without console EQ\u003c\/h3\u003e\nA two-position contour switch on the underside lets you choose between a flat response and a \"low-mid scoop\" setting that cuts around 400 Hz by 7 dB, bringing out attack and higher frequencies without reaching for EQ at the FOH console. That speeds up soundcheck when drum kits change between acts and there isn't always time to dial in EQ for each setup individually.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHalf-cardioid condenser boundary microphone\u003c\/li\u003e\n\u003cli\u003eIntegrated preamp and full-size XLR connector, no external stand needed\u003c\/li\u003e\n\u003cli\u003eMaximum SPL up to 155 dB\u003c\/li\u003e\n\u003cli\u003eLow self-noise: 29.5 dBA\u003c\/li\u003e\n\u003cli\u003eTwo-position contour switch: flat \/ low-mid scoop\u003c\/li\u003e\n\u003cli\u003eRugged housing with a metal protective grille, pouch included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransducer type: electret condenser, boundary design\u003c\/li\u003e\n\u003cli\u003ePolar pattern: half-cardioid\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 Hz - 20,000 Hz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 3.8 mV\/Pa\u003c\/li\u003e\n\u003cli\u003eMaximum SPL: 155 dB (at 2,500 Ω load)\u003c\/li\u003e\n\u003cli\u003eSelf-noise: 29.5 dBA\u003c\/li\u003e\n\u003cli\u003ePower: 11-52V phantom power\u003c\/li\u003e\n\u003cli\u003eConnector: XLR (3-pin)\u003c\/li\u003e\n\u003cli\u003eIncluded: zippered carrying pouch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SHURE","offers":[{"title":"Default Title","offer_id":54207565726033,"sku":"1891","price":325.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/SHUREBETA91A1.jpg?v=1783854179"},{"product_id":"shure-beta-57-a","title":"Shure Beta 57 A","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eShure Beta 57A\u003c\/strong\u003e – supercardioid dynamic instrument microphone, built for miking drums, guitar amplifiers, and brass and woodwind instruments.\n\nA neodymium magnet raises sensitivity and output level by roughly 4 dB over the classic SM57, while keeping a strong signal-to-noise ratio when miking quieter acoustic sources. The 50 Hz to 16,000 Hz frequency response is shaped with a presence boost and a gentle dip around 6 kHz, curbing sibilance and harshness when working on snare, cymbals, or brass instruments. A maximum SPL rating of 140 dB lets the mic sit right up against very high sound-pressure sources without risking capsule overload.\n\n\u003ch3\u003eSupercardioid isolation against loud sources onstage\u003c\/h3\u003e\nA uniform supercardioid pattern, symmetrical about the microphone axis across the entire frequency range, provides strong gain-before-feedback headroom and effective isolation from neighboring sound sources on a crowded stage. Aiming the null at a snare drum's hi-hat cuts bleed from that source, and on a guitar cabinet it reduces crosstalk from adjacent amps in the same tracking session, without reaching for extra noise gates at the mixing stage.\n\n\u003ch3\u003eA pneumatic shock mount that cuts handling noise\u003c\/h3\u003e\nAn advanced internal pneumatic shock-mount system decouples the capsule from the housing, limiting the transfer of mechanical vibration from a drum-rim clamp or mic clip straight into the transducer. A built-in pop filter further tames air blasts during close miking of wind instruments, and the hardened mesh grille along with the enamel-coated die-cast housing hold up to daily load-in and load-out on tour.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSupercardioid pattern, uniform across the full frequency range\u003c\/li\u003e\n\u003cli\u003eNeodymium magnet for higher sensitivity and better signal-to-noise ratio\u003c\/li\u003e\n\u003cli\u003eMaximum SPL up to 140 dB\u003c\/li\u003e\n\u003cli\u003eInternal pneumatic shock-mount system\u003c\/li\u003e\n\u003cli\u003eBuilt-in pop filter\u003c\/li\u003e\n\u003cli\u003eHardened mesh grille and enamel-coated die-cast housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransducer type: dynamic (moving coil)\u003c\/li\u003e\n\u003cli\u003ePolar pattern: supercardioid\u003c\/li\u003e\n\u003cli\u003eFrequency response: 50 Hz - 16,000 Hz\u003c\/li\u003e\n\u003cli\u003eSensitivity (1 kHz, open circuit voltage): -51 dBV\/Pa (2.8 mV)\u003c\/li\u003e\n\u003cli\u003eImpedance: rated 150 Ω (actual 290 Ω)\u003c\/li\u003e\n\u003cli\u003eMaximum SPL: 140 dB\u003c\/li\u003e\n\u003cli\u003eConnector: XLR (3-pin)\u003c\/li\u003e\n\u003cli\u003eNet weight: approximately 275 g\u003c\/li\u003e\n\u003cli\u003eIncluded: microphone clip and carrying pouch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SHURE","offers":[{"title":"Default Title","offer_id":54207565758801,"sku":"1892","price":203.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/ShureBeta57A1.jpg?v=1783854170"},{"product_id":"shure-sm7b","title":"Shure SM7B","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eShure SM7B\u003c\/strong\u003e – cardioid dynamic microphone, a long-standing industry standard for vocal recording, podcasting, and radio production.\n\nThe dynamic capsule's flat, wide-range response of 50 Hz to 20,000 Hz stays uniform with frequency and symmetrical about the axis, giving maximum rejection of off-axis sound with minimal tonal coloration. A built-in humbucking coil, together with additional shielding, cuts electromagnetic interference generated by computer monitors, fluorescent lights, and other electrical devices in the recording room. Low -59 dBV\/Pa sensitivity, however, calls for a preamp with at least +60 dB of clean gain in reserve, or an inline booster, when working with a typical audio interface.\n\n\u003ch3\u003eShielding against electromagnetic interference\u003c\/h3\u003e\nThe humbucking coil and additional electronic shielding cut mains hum and RF interference down to just 11 dB at 60 Hz, which matters directly in home studios set up close to computers, Wi-Fi routers, and other sources of electromagnetic radiation. This trait sets the SM7B apart from many condenser microphones, which under similar conditions need extra shielded cabling or physical separation from electronic gear.\n\n\u003ch3\u003eSwitchable response without changing microphones\u003c\/h3\u003e\nTwo rear-panel switches - bass rolloff and mid-range presence boost - tailor the frequency response to a specific source without reaching for another microphone: a podcast vocal, a guitar cab, a hi-hat, or a radio announcer each call for different settings on the same transducer. Internal air-suspension shock isolation and a dual-layer windscreen setup (the standard one plus the included A7WS for close-up work) eliminate handling noise and plosives without an external pop filter.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eClassic cardioid pattern, symmetrical about the axis\u003c\/li\u003e\n\u003cli\u003eHumbucking coil and shielding to limit electromagnetic interference\u003c\/li\u003e\n\u003cli\u003eBass rolloff and presence boost switches\u003c\/li\u003e\n\u003cli\u003eInternal air-suspension shock isolation\u003c\/li\u003e\n\u003cli\u003eTwo windscreens included (standard and A7WS for close-up work)\u003c\/li\u003e\n\u003cli\u003eRugged all-metal housing with a yoke on a 5\/8\"-27 thread\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransducer type: dynamic (moving coil)\u003c\/li\u003e\n\u003cli\u003ePolar pattern: cardioid\u003c\/li\u003e\n\u003cli\u003eFrequency response: 50 Hz - 20,000 Hz\u003c\/li\u003e\n\u003cli\u003eSensitivity (1 kHz, open circuit voltage): -59 dBV\/Pa (1.12 mV)\u003c\/li\u003e\n\u003cli\u003eOutput impedance: 150 Ω\u003c\/li\u003e\n\u003cli\u003eElectromagnetic hum sensitivity (60 Hz): 11 dB\u003c\/li\u003e\n\u003cli\u003eConnector: XLR (3-pin)\u003c\/li\u003e\n\u003cli\u003eMount: integrated yoke, 5\/8\"-27 thread\u003c\/li\u003e\n\u003cli\u003eNet weight: 0.764 kg\u003c\/li\u003e\n\u003cli\u003ePower: none required (dynamic microphone)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SHURE","offers":[{"title":"Default Title","offer_id":54207566217553,"sku":"4413","price":490.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/SHURESM7B1.jpg?v=1783854106"},{"product_id":"shure-qlxd4e-g51","title":"Shure QLXD4E G51","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eShure QLXD4E G51\u003c\/strong\u003e – single-channel digital wireless receiver in a half-rack chassis, European version operating in the G51 band (470-534 MHz), sold without a transmitter.\n\nThe receiver processes 24-bit audio at 48 kHz with AES-256 encryption enabled from the factory and digital predictive switching diversity, which switches antennas before a signal gap occurs. The half-rack (PAR 9.5) housing fits a standard 19-inch rack when two units sit side by side, making it easy to expand a rig with more channels without using extra mounting space. The G51 band offers up to 72 MHz of switching bandwidth and 22 compatible channels within a single 8 MHz TV channel.\n\n\u003ch3\u003eFlexible integration with existing transmission gear\u003c\/h3\u003e\nThe receiver works with the QLXD2 handheld transmitter, the QLXD1 bodypack, or the QLXD3 plug-on transmitter, letting you match the transmission type to the task at hand - vocals, an acoustic instrument, or a camera-mounted plug-on mic - without swapping the receiver itself when the application changes. That flexibility makes it easier to build a mixed rental inventory, where the same receivers serve different configurations depending on the client's order.\n\n\u003ch3\u003eOperating in the European G51 band without regulatory overreach\u003c\/h3\u003e\nThe E version, cleared for the G51 band under regulations in force across Europe, lets you run an installation without manually restricting the frequency range to permitted spectrum slices. Automatic frequency scanning and IR sync deploy a clean channel to the transmitter within seconds, and the Ethernet port coordinates multiple receivers in a single installation through Wireless Workbench software, cutting the risk of accidentally straying outside the allowed band.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSingle-channel digital receiver in a half-rack (PAR 9.5) chassis\u003c\/li\u003e\n\u003cli\u003eAES-256 encryption and digital predictive switching diversity\u003c\/li\u003e\n\u003cli\u003eCompatible with QLXD1, QLXD2, and QLXD3 transmitters\u003c\/li\u003e\n\u003cli\u003eEuropean version, G51 band compliant with regional regulations\u003c\/li\u003e\n\u003cli\u003eEthernet port with Wireless Workbench and ShurePlus Channels integration\u003c\/li\u003e\n\u003cli\u003eAutomatic frequency scanning and IR sync\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDevice type: single-channel digital receiver, half-rack chassis\u003c\/li\u003e\n\u003cli\u003eAudio conversion: 24-bit \/ 48 kHz\u003c\/li\u003e\n\u003cli\u003eEncryption: AES-256\u003c\/li\u003e\n\u003cli\u003eFrequency band: G51, 470-534 MHz\u003c\/li\u003e\n\u003cli\u003eSwitching bandwidth: up to 72 MHz\u003c\/li\u003e\n\u003cli\u003eCompatible channels: 22 per 8 MHz TV band\u003c\/li\u003e\n\u003cli\u003eGain adjustment: up to 60 dB\u003c\/li\u003e\n\u003cli\u003eAudio outputs: XLR and 1\/4\" jack\u003c\/li\u003e\n\u003cli\u003eConnectivity: Ethernet port, iOS remote control\u003c\/li\u003e\n\u003cli\u003ePower: 100-240 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SHURE","offers":[{"title":"Default Title","offer_id":54207566250321,"sku":"32065","price":1019.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/ShureQLXD4EG511.jpg?v=1783854156"},{"product_id":"shure-p3tera215cl-k3e-premium","title":"Shure P3TERA215CL-K3E - PREMIUM","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eShure P3TERA215CL-K3E\u003c\/strong\u003e – premium PSM300 wireless in-ear monitoring set, comprising a P3T transmitter, a P3RA receiver, and SE215-CL earphones, in the K3E band (606-630 MHz).\n\nThe system transmits in analog form using patented Audio Reference Companding technology, cutting self-noise in the signal path and eliminating the artifacts typical of cheaper wireless setups, with a range of up to 90 m and a signal-to-noise ratio reaching 90 dB. The half-rack P3T transmitter handles one input channel on a 6.3mm TRS connector with a loop output, letting several units be chained together when expanding the system for additional performers. The Premium set uses the all-metal P3RA receiver with an LCD display, rather than the simpler P3R found in the base-level set.\n\n\u003ch3\u003eTwo independent mixes from a single transmitter\u003c\/h3\u003e\nMixMode lets each performer independently set the balance between the two audio channels sent from the same transmitter, such as the mix between their own instrument and the rest of the band, without needing a separate mixing path for every person onstage. The P3RA's two-band shelving EQ, with adjustable bass and treble, further tailors the monitored tone to personal hearing preference, and a volume limiter protects hearing from sudden level jumps when settings change at the transmitter.\n\n\u003ch3\u003ePower matched to the type of gig\u003c\/h3\u003e\nThe P3RA receiver runs on two AA batteries for up to 6-7 hours or on the SB900A lithium-ion battery, which charges directly in the bodypack without removing it, which matters on daily tour schedules with limited time between soundcheck and the show. The all-metal receiver construction, unlike the plastic housing of the base P3R model, holds up better to drops and daily packing into a transport case.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAnalog transmission with Audio Reference Companding technology\u003c\/li\u003e\n\u003cli\u003eOperating range up to 90 m, signal-to-noise ratio up to 90 dB\u003c\/li\u003e\n\u003cli\u003eP3RA receiver: all-metal housing, LCD display, MixMode feature\u003c\/li\u003e\n\u003cli\u003eTwo-band shelving EQ and volume limiter on the receiver\u003c\/li\u003e\n\u003cli\u003ePower: 2 AA batteries (up to 6-7 hours) or SB900A rechargeable battery\u003c\/li\u003e\n\u003cli\u003eSE215-CL earphones: single dynamic driver, isolation up to 37 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem type: analog in-ear monitoring system, single channel\u003c\/li\u003e\n\u003cli\u003eAudio conversion: 24-bit\u003c\/li\u003e\n\u003cli\u003eOperating range: up to 90 m (300 ft)\u003c\/li\u003e\n\u003cli\u003eSignal-to-noise ratio: up to 90 dB\u003c\/li\u003e\n\u003cli\u003eTHD: less than 0.5% (typical)\u003c\/li\u003e\n\u003cli\u003eRF tuning bandwidth: up to 24 MHz\u003c\/li\u003e\n\u003cli\u003eFrequency band: K3E, 606-630 MHz\u003c\/li\u003e\n\u003cli\u003eTransmitter input: 6.3mm TRS (balanced) with loop output\u003c\/li\u003e\n\u003cli\u003eReceiver power: 2 x AA or SB900A rechargeable battery\u003c\/li\u003e\n\u003cli\u003eEarphones: SE215-CL, 22 Hz - 17.5 kHz range, 107 dB SPL\/mW sensitivity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SHURE","offers":[{"title":"Default Title","offer_id":54207566283089,"sku":"34244","price":1161.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/ShureP3TERA215CL-K3E-PREMIUM.jpg?v=1783854134"},{"product_id":"shure-mv7x","title":"Shure MV7X","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eShure SM7dB\u003c\/strong\u003e – dynamic vocal microphone with a built-in preamp, built on the capsule known from the SM7B.\n\nThe microphone keeps the same dynamic transducer and cardioid pattern known from the SM7B, adding a Shure-designed preamp with licensed Cloud technology that delivers up to +28 dB of clean gain, powered by +48V phantom power. A mode switch lets you select +18 dB, +28 dB, or bypass the preamp entirely to get the SM7B's original output characteristics. The 50 Hz to 20,000 Hz frequency response and the same rear-panel EQ controls - bass roll-off and presence boost - stay identical regardless of the mode selected.\n\n\u003ch3\u003eEnough gain without an external preamp\u003c\/h3\u003e\nThe SM7B's low sensitivity has long forced engineers to add inline boosters or high-gain interfaces, often at the cost of extra noise in the signal chain. The SM7dB's built-in preamp delivers roughly 60 dB of total gain at the +28 dB setting without adding a single extra device to the chain, simplifying a mobile rig down to just the mic, a cable, and an interface. That matters when working with budget interfaces or compact field recorders whose built-in preamps rarely offer the clean gain headroom a classic SM7B needs.\n\n\u003ch3\u003eThe same tonal character regardless of mode\u003c\/h3\u003e\nThe dynamic capsule is identical to the SM7B's, so switching between bypass and +18 dB or +28 dB gain doesn't change the microphone's tone or frequency response - only the output level changes. When recording loud sources like a guitar cab or a snare drum, staying in bypass or +18 dB makes sense, while a quieter podcast vocal calls for the full +28 dB, without needing to swap microphones between sessions with different dynamics.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in Shure preamp with Cloud technology, up to +28 dB of clean gain\u003c\/li\u003e\n\u003cli\u003eBypass mode restoring original SM7B output characteristics\u003c\/li\u003e\n\u003cli\u003eRear-panel EQ: bass roll-off and presence boost\u003c\/li\u003e\n\u003cli\u003eCardioid pattern with strong rear-side rejection\u003c\/li\u003e\n\u003cli\u003eInternal shock isolation and an effective built-in pop filter\u003c\/li\u003e\n\u003cli\u003eElectromagnetic shielding against interference from computer monitors\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransducer type: dynamic (moving coil)\u003c\/li\u003e\n\u003cli\u003ePolar pattern: cardioid\u003c\/li\u003e\n\u003cli\u003eFrequency response: 50 Hz - 20,000 Hz\u003c\/li\u003e\n\u003cli\u003ePreamp gain: +18 dB or +28 dB, with bypass option\u003c\/li\u003e\n\u003cli\u003eSensitivity (bypass mode, 1 kHz): -59 dBV\/Pa\u003c\/li\u003e\n\u003cli\u003eSensitivity (+28 dB mode, 1 kHz): -31 dBV\/Pa\u003c\/li\u003e\n\u003cli\u003ePreamp power: +48V phantom power\u003c\/li\u003e\n\u003cli\u003eConnector: XLR (3-pin)\u003c\/li\u003e\n\u003cli\u003eMount: yoke with threaded stand nut, 3\/8\" adapter included\u003c\/li\u003e\n\u003cli\u003eNet weight: 837 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SHURE","offers":[{"title":"Default Title","offer_id":54207566578001,"sku":"60575","price":222.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/SHUREMV7X1.jpg?v=1783854114"},{"product_id":"shure-sm7db","title":"Shure SM7DB","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eShure MV7X\u003c\/strong\u003e – dynamic microphone with XLR output only, built on the housing known from the MV7, with no USB section and no digital processing.\n\nThe design runs on a dynamic cardioid capsule with Voice Isolation Technology, with no internal DSP and no A\/D converter. The signal reaches the XLR output in purely analog form, without any software or USB drivers in the path, making the MV7X a practical choice for engineers who already own an audio interface, mixer, or recording chain and don't need an extra layer of digital processing built into the microphone itself. The rugged, all-metal housing with an adjustable yoke on a 5\/8\"-27 thread gives repeatable positioning in a podcast studio or on a recording set.\n\n\u003ch3\u003eAn analog signal with no DSP in the way\u003c\/h3\u003e\nNo onboard digital processing means all EQ, compression, and noise reduction happens at the interface stage or in the DAW, fully under the engineer's control rather than baked into the microphone's factory settings. That approach removes any dependency on USB drivers or a companion app, which matters when building a recording chain that's independent of a specific operating system or integrating with a preamp already in place.\n\n\u003ch3\u003eCardioid pickup in an untreated room\u003c\/h3\u003e\nThe directional cardioid pattern provides roughly 25 dB of attenuation for sound arriving from behind the capsule, limiting the buildup of wall and ceiling reflections in rooms without acoustic treatment. A frequency response rolled off below 50 Hz naturally cuts low-frequency air conditioning rumble, desk vibration, and excessive proximity effect, giving a warmer, less muddy vocal tone without needing a high-pass filter at the mixing stage. The built-in windscreen further tames plosives without a separate pop filter.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic cardioid capsule with Voice Isolation Technology\u003c\/li\u003e\n\u003cli\u003eXLR output only, fully analog signal path, no DSP\u003c\/li\u003e\n\u003cli\u003eNo phantom power required\u003c\/li\u003e\n\u003cli\u003eBuilt-in windscreen for plosive control\u003c\/li\u003e\n\u003cli\u003eRugged all-metal construction with an adjustable yoke\u003c\/li\u003e\n\u003cli\u003e5\/8\"-27 mounting thread with a 3\/8\" adapter included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransducer type: dynamic (moving coil)\u003c\/li\u003e\n\u003cli\u003ePolar pattern: cardioid\u003c\/li\u003e\n\u003cli\u003eFrequency response: 50 Hz - 16,000 Hz\u003c\/li\u003e\n\u003cli\u003eXLR sensitivity (minimum gain, flat mode): -55 dBV\/Pa at 1 kHz\u003c\/li\u003e\n\u003cli\u003eXLR output impedance: 252 Ω at 1 kHz\u003c\/li\u003e\n\u003cli\u003eConnector: XLR (3-pin, passive)\u003c\/li\u003e\n\u003cli\u003eMount: 5\/8\"-27 thread on an adjustable yoke\u003c\/li\u003e\n\u003cli\u003eNet weight: 0.55 kg\u003c\/li\u003e\n\u003cli\u003ePower: none required (dynamic microphone)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SHURE","offers":[{"title":"Default Title","offer_id":54207566610769,"sku":"60576","price":644.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/SHURESM7DB1.jpg?v=1783854097"},{"product_id":"shure-se215-cl-efs","title":"Shure SE215-CL-EFS","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eShure SE215-CL-EFS\u003c\/strong\u003e – single dynamic-driver in-ear earphones, the entry point of the SE line, in clear finish.\n\nThe design runs on a single dynamic driver with no passive crossover, avoiding the phase shifts typical of multi-driver setups and keeping a consistent, unified tone across the band. Passive isolation up to 37 dB and a detachable Kevlar-reinforced cable make the SE215-CL-EFS a practical starting point both for musicians moving up from consumer earbuds to stage monitoring and for everyday listening off stage.\n\n\u003ch3\u003eNatural dynamics without a multi-driver crossover\u003c\/h3\u003e\nA single dynamic driver responds to the input signal without splitting the band across separate diaphragms, so attack and decay stay coherent, without the phase shifts near a crossover point common to balanced-armature designs. That setup suits bass lines and kick drum monitoring, where a fast transient response matters, while keeping production cost down relative to multi-driver models without giving up basic tonal accuracy.\n\n\u003ch3\u003eA swappable cable as the starting point for a bigger setup\u003c\/h3\u003e\nThe locking, 360-degree rotating MMCX connector lets you attach the RMCE-TW2 True Wireless adapter or the RMCE-BT2 Bluetooth cable down the line without replacing the earphones themselves, which matters when building out a monitoring setup gradually. The Kevlar-reinforced cable runs the full length of the assembly, cutting the risk of a broken conductor from daily packing, and the formable over-ear section keeps the earphones anchored during stage movement or exercise.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSingle dynamic driver with no passive crossover\u003c\/li\u003e\n\u003cli\u003ePassive noise isolation up to 37 dB\u003c\/li\u003e\n\u003cli\u003eKevlar-reinforced detachable cable with locking, 360-degree rotating MMCX connector\u003c\/li\u003e\n\u003cli\u003eCompatible with RMCE-TW2 (True Wireless) and RMCE-BT2 (Bluetooth) adapters\u003c\/li\u003e\n\u003cli\u003eFit kit with silicone and foam sleeves in S, M, L\u003c\/li\u003e\n\u003cli\u003eClear housing (CL finish) and carrying case included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransducer type: single dynamic driver\u003c\/li\u003e\n\u003cli\u003eFrequency range: 22 Hz – 17.5 kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 107 dB SPL\/mW\u003c\/li\u003e\n\u003cli\u003eImpedance: 17-20 Ω\u003c\/li\u003e\n\u003cli\u003eNoise attenuation: up to 37 dB\u003c\/li\u003e\n\u003cli\u003eCable length: 162 cm (64 in)\u003c\/li\u003e\n\u003cli\u003eOutput connector: gold-plated 3.5mm\u003c\/li\u003e\n\u003cli\u003eNet weight: approximately 30 g\u003c\/li\u003e\n\u003cli\u003eManufacturer warranty: 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SHURE","offers":[{"title":"Default Title","offer_id":54207566872913,"sku":"60574","price":128.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/ShureSE215-CL-EFS.jpg?v=1783854084"},{"product_id":"shure-glxd16-e-z4","title":"Shure GLXD16+E-Z4","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eShure GLXD16+E-Z4\u003c\/strong\u003e – dual-band digital wireless system for guitar and bass in a pedalboard format, comprising a GLXD6+ receiver, a GLXD1+ bodypack, and a WA305 instrument cable, in the European version.\n\nThe system runs simultaneously on 2.4 GHz and 5.8 GHz, together offering more than 208 MHz of available bandwidth, over double the width offered by the earlier single-band GLX-D generation. The stompbox-format receiver drops straight into a pedalboard slot, replacing both the standard instrument cable and a separate tuner pedal thanks to a built-in tuner with strobe and needle modes and an adjustable reference pitch of 432-447 Hz. The Z4 variant covers globally license-free frequencies, so the system needs no paperwork when touring abroad.\n\n\u003ch3\u003eTwo bands, no dropouts on a crowded stage\u003c\/h3\u003e\nTrue digital diversity uses two antennas and two independent receiver modules, while the system continuously monitors two backup frequencies alongside the main transmission. When interference is detected, it switches to an open band automatically, without an audio gap and without the musician doing anything, which matters at festivals with heavy Wi-Fi traffic, IEM systems, and other 2.4 GHz devices all running in the same venue at once.\n\n\u003ch3\u003ePower and tuning built into the pedalboard\u003c\/h3\u003e\nThe SB904 lithium-ion battery delivers up to 12 hours on a single charge, and a 15-minute quick charge adds 1.5 hours of playing time if the battery runs low right before a set. Charging happens over USB-C, either in the transmitter or directly on the front of the receiver, without unplugging the pedalboard from its power. The 1\/4\" true bypass input lets you switch to a wired instrument at any moment without pulling the receiver out of the signal chain.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual-band transmission on 2.4 GHz and 5.8 GHz with over 208 MHz of bandwidth\u003c\/li\u003e\n\u003cli\u003eTrue digital diversity with two backup frequencies\u003c\/li\u003e\n\u003cli\u003eBuilt-in tuner (strobe\/needle mode, 432-447 Hz reference pitch)\u003c\/li\u003e\n\u003cli\u003eSB904 battery with USB-C charging, up to 12 hours of runtime\u003c\/li\u003e\n\u003cli\u003eQuick charge: 15 minutes for 1.5 hours of playing time\u003c\/li\u003e\n\u003cli\u003e1\/4\" true bypass input and 9V power compatible with pedalboards\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem type: digital wireless system for instruments, pedalboard format\u003c\/li\u003e\n\u003cli\u003eFrequency range: 2.4 GHz and 5.8 GHz (dual-band)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 Hz - 20 kHz\u003c\/li\u003e\n\u003cli\u003eDynamic range: 120 dB\u003c\/li\u003e\n\u003cli\u003eChannel count: up to 11 in single-band mode, up to 16 in dual-band mode\u003c\/li\u003e\n\u003cli\u003eOperating range: up to approx. 30 m (100 ft) indoors, 20 m (65 ft) outdoors\u003c\/li\u003e\n\u003cli\u003eBattery: SB904 lithium-ion, up to 12 hours of runtime\u003c\/li\u003e\n\u003cli\u003eCharging: USB-C, 15-minute quick charge for 1.5 hours of playtime\u003c\/li\u003e\n\u003cli\u003eAudio output: 1\/4\" jack\u003c\/li\u003e\n\u003cli\u003eReceiver power: 9V (pedalboard compatible, minimum 400 mA)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SHURE","offers":[{"title":"Default Title","offer_id":54207566971217,"sku":"60578","price":643.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/ShureGLXD16_E-Z41.jpg?v=1783854073"},{"product_id":"shure-slxd24-e-b58-g65","title":"Shure SLXD24+E\/B58-G65","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eShure SLXD24+E\/B58-G65\u003c\/strong\u003e – single-channel digital wireless system from the SLX-D+ generation, comprising an SLXD4+ receiver and a handheld transmitter with a Beta 58A capsule, in the European version and G65 band (470-606 MHz).\n\nThe system delivers over 118 dB of dynamic range with 24-bit digital processing and 138 MHz of tuning bandwidth, a significant jump over the base SLX-D line in the number of clean channels available within the same operating area. Automatic Setup keeps the transmitter linked to the receiver through transient RF interference, without needing to re-pair the devices mid-show. Every SLX-D+ unit ships with AES-256 encryption enabled from the factory, ruling out signal interception at credentialed events.\n\n\u003ch3\u003eAutomatic feedback reduction onstage\u003c\/h3\u003e\nThe receiver's built-in Digital Feedback Reducer software detects and suppresses the bands responsible for feedback before it becomes audible to the audience, cutting down on manual EQ correction every time monitors are repositioned. The Beta 58A's supercardioid pattern further narrows the pickup field, reducing feedback risk when working close to stage monitors or loud sources off to the side of the vocalist.\n\n\u003ch3\u003eRemote channel changes without stopping the show\u003c\/h3\u003e\nShowLink Ease lets you change the transmitter's frequency, adjust output power, or lock the control panel directly from the receiver, without walking over to the performer onstage mid-set. Integration with Wireless Workbench and the WWB Mobile app over Wi-Fi or Bluetooth allows system status monitoring and firmware updates from a phone or laptop, speeding up the response to spectrum interference in larger venues.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSingle-channel SLX-D+ system with a half-rack receiver and handheld transmitter\u003c\/li\u003e\n\u003cli\u003eBeta 58A supercardioid capsule\u003c\/li\u003e\n\u003cli\u003eDigital Feedback Reducer for automatic feedback suppression\u003c\/li\u003e\n\u003cli\u003eShowLink Ease for remote transmitter frequency and power control from the receiver\u003c\/li\u003e\n\u003cli\u003eAES-256 encryption enabled by default\u003c\/li\u003e\n\u003cli\u003eWireless Workbench and WWB Mobile app integration (Wi-Fi\/Bluetooth)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem type: single-channel digital wireless system\u003c\/li\u003e\n\u003cli\u003eAudio conversion: 24-bit \/ 48 kHz\u003c\/li\u003e\n\u003cli\u003eDynamic range: greater than 118 dB\u003c\/li\u003e\n\u003cli\u003eRF tuning bandwidth: 138 MHz\u003c\/li\u003e\n\u003cli\u003eSystem count: up to 11 per 6 MHz TV channel, up to 14 per 8 MHz channel\u003c\/li\u003e\n\u003cli\u003eEncryption: AES-256\u003c\/li\u003e\n\u003cli\u003eMicrophone capsule: Beta 58A, dynamic supercardioid\u003c\/li\u003e\n\u003cli\u003eTransmitter power: 2 x AA batteries or SB903 rechargeable pack\u003c\/li\u003e\n\u003cli\u003eOperating time: up to 8 hours\u003c\/li\u003e\n\u003cli\u003eFrequency band: G65, 470-606 MHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SHURE","offers":[{"title":"Default Title","offer_id":54207567102289,"sku":"60572","price":995.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/ShureSLXD24_E_B58-G651.jpg?v=1783854057"},{"product_id":"shure-se21dybk-tw2-efs","title":"Shure SE21DYBK+TW2-EFS","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eShure SE21DYBK+TW2-EFS\u003c\/strong\u003e – second-generation SE215 earphones bundled with the wireless RMCE-TW2 adapter, in black finish.\n\nThe bundle pairs the single dynamic SE215 driver, familiar from stage and everyday listening use, with a True Wireless adapter that connects through the MMCX connector in place of a standard cable. That setup keeps the same, well-known driver character without a wire running between the two earpieces, while still allowing a switch back to wired operation with a standard SE215 cable sold separately. Passive isolation up to 37 dB and a fit kit in three sizes handle outside noise both on the road and during rehearsals in a loud room.\n\n\u003ch3\u003eFamiliar sound signature, no cable between the earpieces\u003c\/h3\u003e\nThe RMCE-TW2 adapter carries the signal over Bluetooth 5.0 with support for aptX, AAC, and SBC codecs, preserving the SE215 driver's character known from the wired version, without a cable to route between the earpieces during stage movement or exercise. Role-switching lets you run a single earpiece on its own, which comes in handy for short calls or one-ear monitoring while working in the studio. Environment Mode brings in external microphones with a single touch, letting you talk to another musician without removing the earphones.\n\n\u003ch3\u003eBattery that lasts a full day of rehearsals and travel\u003c\/h3\u003e\nThe adapter delivers up to 8 hours on a single charge, and the included charging case adds three more full cycles, for up to 32 hours total without access to an outlet. IPX4 water resistance protects the electronics from sweat and moisture during intense rehearsals or workouts, and auto power-on when removed from the case shortens setup time before playing. The ShurePlus PLAY app lets you adjust EQ to personal preference without altering the driver's factory tuning.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSingle dynamic SE215 driver with passive isolation up to 37 dB\u003c\/li\u003e\n\u003cli\u003eTrue Wireless RMCE-TW2 adapter with MMCX connector, compatible with wired cables\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.0 with aptX, AAC, and SBC codec support\u003c\/li\u003e\n\u003cli\u003eUp to 8 hours of adapter runtime, up to 32 hours total with the charging case\u003c\/li\u003e\n\u003cli\u003eIPX4 water resistance, Environment Mode, and earpiece role-switching\u003c\/li\u003e\n\u003cli\u003eFit kit in three sizes and a carrying\/charging case included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransducer type: single dynamic driver (per earpiece)\u003c\/li\u003e\n\u003cli\u003eFrequency range: 22 Hz - 17.5 kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 107 dB SPL\/mW\u003c\/li\u003e\n\u003cli\u003eImpedance: 17-20 Ω\u003c\/li\u003e\n\u003cli\u003eNoise attenuation: up to 37 dB\u003c\/li\u003e\n\u003cli\u003eWireless connectivity: Bluetooth 5.0, range up to 10 m\u003c\/li\u003e\n\u003cli\u003eSupported codecs: aptX, AAC, SBC\u003c\/li\u003e\n\u003cli\u003eAdapter runtime: up to 8 hours, up to 32 hours with case\u003c\/li\u003e\n\u003cli\u003eWater resistance rating: IPX4\u003c\/li\u003e\n\u003cli\u003eCharging: USB-C\u003c\/li\u003e\n\u003cli\u003eManufacturer warranty: 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SHURE","offers":[{"title":"Default Title","offer_id":54207567167825,"sku":"60573","price":298.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/ShureSE21DYBK_TW2-EFS.jpg?v=1783854049"},{"product_id":"shure-qlxd4-h51","title":"Shure QLXD4 H51","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eShure QLXD4-H51\u003c\/strong\u003e – single-channel digital wireless receiver in a half-rack chassis, operating in the H51 band (534-598 MHz), sold without a transmitter.\n\nThe receiver handles 24-bit audio at 48 kHz with AES-256 encryption and digital predictive switching diversity, protecting the signal from dropouts in venues with heavy RF reflection. As part of the QLX-D system it works with both the QLXD2 handheld transmitter and the QLXD1 bodypack, so the capsule or transmission type can be chosen independently of the receiver when expanding a rack with additional channels. The H51 band offers up to 72 MHz of switching bandwidth and 22 compatible channels within a single 8 MHz TV channel.\n\n\u003ch3\u003eFrequency coordination across multiple rack channels\u003c\/h3\u003e\nAutomatic frequency scanning and IR sync deploy a clean channel to the transmitter in seconds, without manually searching the spectrum on each device individually. The Ethernet port links several QLXD4 receivers into one network and coordinates frequencies through Wireless Workbench software, cutting the risk of RF conflicts when several systems run at once in the same building. The internal limiter protects against digital clipping without operator intervention during sudden level spikes onstage.\n\n\u003ch3\u003eChannel management without walking to the rack\u003c\/h3\u003e\nIntegration with the ShurePlus Channels app lets you monitor audio and RF levels, adjust gain across a range of up to 60 dB, and check transmitter battery status directly from an iOS phone or tablet, without needing to walk over to the FOH rack mid-show. A large LCD display along with front-panel audio and RF LED meters make quick status checks possible directly at the unit as well, including in low-light stage conditions.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSingle-channel digital receiver in a half-rack chassis\u003c\/li\u003e\n\u003cli\u003eAES-256 encryption and digital predictive switching diversity\u003c\/li\u003e\n\u003cli\u003eCompatible with QLXD1 (bodypack) and QLXD2 (handheld) transmitters\u003c\/li\u003e\n\u003cli\u003eEthernet port with Wireless Workbench and ShurePlus Channels integration\u003c\/li\u003e\n\u003cli\u003eAutomatic frequency scanning and IR sync\u003c\/li\u003e\n\u003cli\u003eGain adjustment up to 60 dB with an internal limiter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDevice type: single-channel digital receiver, half-rack chassis\u003c\/li\u003e\n\u003cli\u003eAudio conversion: 24-bit \/ 48 kHz\u003c\/li\u003e\n\u003cli\u003eEncryption: AES-256\u003c\/li\u003e\n\u003cli\u003eFrequency band: H51, 534-598 MHz\u003c\/li\u003e\n\u003cli\u003eSwitching bandwidth: up to 72 MHz\u003c\/li\u003e\n\u003cli\u003eCompatible channels: 22 per 8 MHz TV band\u003c\/li\u003e\n\u003cli\u003eGain adjustment: up to 60 dB\u003c\/li\u003e\n\u003cli\u003eAudio outputs: XLR and 1\/4\" jack\u003c\/li\u003e\n\u003cli\u003eConnectivity: Ethernet port, iOS remote control\u003c\/li\u003e\n\u003cli\u003ePower: 100-240 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SHURE","offers":[{"title":"Default Title","offer_id":54207567233361,"sku":"60579","price":1019.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/ShureQLXD4H511.jpg?v=1783854040"},{"product_id":"shure-mv7-k","title":"Shure MV7+-K","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eShure MV7+-K\u003c\/strong\u003e – hybrid dynamic microphone with XLR and USB-C outputs, built around a capsule derived from the SM7B, in black finish.\n\nThe mic pairs a directional cardioid pattern with Voice Isolation Technology, cutting sound picked up from the sides and rear of the capsule. Signal can be pulled simultaneously from the XLR output, unaffected by any digital processing, and from the USB-C port, where a 16- or 24-bit converter at 44.1 or 48 kHz feeds the full set of DSP tools available in the MOTIV Mix app. The all-metal build, with an adjustable yoke on a standard 5\/8\"-27 thread, is built for daily use in a recording studio or on a streaming desk.\n\n\u003ch3\u003eTwo outputs, one safety recording\u003c\/h3\u003e\nRunning XLR and USB-C at the same time lets you capture a raw analog signal on an interface or mixer straight into your DAW, while the parallel USB path feeds the MOTIV Mix app with EQ, compression, and noise reduction applied. In practice that gives you an unprocessed backup copy in case the digital effects chain gets misconfigured, which matters when recording live interviews or podcast episodes with no chance for a retake. The extended windscreen tames plosives during close mic work without needing a separate pop filter.\n\n\u003ch3\u003eConsistent level without an engineer in the room\u003c\/h3\u003e\nAuto Level Mode reads the speaker's distance from the capsule and continuously adjusts gain and compression, cutting down on manual level-riding during solo recordings or guest interviews with varying vocal volume. The built-in real-time denoiser and an adjustable 0-36 dB gain range let you match the signal to an untreated room, and the LED touch panel doubles as a level meter and a quick mute control while recording.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic cardioid capsule with Voice Isolation Technology\u003c\/li\u003e\n\u003cli\u003eSimultaneous XLR (analog) and USB-C (digital) outputs\u003c\/li\u003e\n\u003cli\u003eMOTIV Mix app: EQ, compression, denoiser, and reverb effects\u003c\/li\u003e\n\u003cli\u003eAuto Level Mode with automatic gain adjustment\u003c\/li\u003e\n\u003cli\u003eLED touch panel doubling as a level meter and mute control\u003c\/li\u003e\n\u003cli\u003e3.5mm headphone output for real-time monitoring\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransducer type: dynamic (moving coil)\u003c\/li\u003e\n\u003cli\u003ePolar pattern: cardioid\u003c\/li\u003e\n\u003cli\u003eFrequency response: 50 Hz - 16,000 Hz\u003c\/li\u003e\n\u003cli\u003eA\/D converter: 16 or 24-bit, 44.1 or 48 kHz\u003c\/li\u003e\n\u003cli\u003eAdjustable gain range: 0 to +36 dB\u003c\/li\u003e\n\u003cli\u003eMaximum SPL: 128 dB\u003c\/li\u003e\n\u003cli\u003eImpedance: 350 Ω\u003c\/li\u003e\n\u003cli\u003eHeadphone output: 3.5mm\u003c\/li\u003e\n\u003cli\u003ePower: USB bus power\u003c\/li\u003e\n\u003cli\u003eMount: 5\/8\"-27 thread on an adjustable yoke\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SHURE","offers":[{"title":"Default Title","offer_id":54207567266129,"sku":"60580","price":347.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/ShureMV7_-K1.jpg?v=1783854030"},{"product_id":"shure-se535-cl-efs","title":"Shure SE535-CL-EFS","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eShure SE535-CL-EFS\u003c\/strong\u003e – triple balanced-armature in-ear monitors, the flagship of the SE line below the SE846.\n\nThe design runs three balanced-armature drivers per side – one dedicated tweeter and two woofers working in parallel – joined by a passive crossover inside the housing. Splitting the band across three independent sections keeps bass from masking the midrange in dense arrangements, and treble stays defined during long monitoring sessions. The CL-EFS version has a clear housing and a detachable Kevlar-reinforced cable, making it a practical tool for both studio and touring use.\n\n\u003ch3\u003eBand separation in a dense mix\u003c\/h3\u003e\nTwo woofers working in parallel take the load off a single low-frequency driver, so bass stays controlled and fast even when a rhythm section and vocal are both present in the monitor mix. The passive crossover limits distortion at the crossover points, which matters when mixing on headphones during tracking sessions, where accurate level judgment across individual tracks is essential. The 18 Hz to 19 kHz range and 119 dB SPL\/mW sensitivity make fine detail audible at lower volume levels, without pushing the gain toward distortion.\n\n\u003ch3\u003eCable built for touring\u003c\/h3\u003e\nThe Kevlar-reinforced cable runs the full length of the assembly, cutting the risk of a broken conductor from daily packing and unpacking, and the locking MMCX connector rotates a full 360 degrees to route the cable without twisting loose during stage movement. The high sensitivity reduces the load on the source device, which matters when running from bodypack transmitters with limited output power or straight from an audio interface without a dedicated headphone amp.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTriple balanced-armature drivers per side (tweeter and two woofers) with passive crossover\u003c\/li\u003e\n\u003cli\u003ePassive noise isolation up to 37 dB\u003c\/li\u003e\n\u003cli\u003eKevlar-reinforced detachable cable with locking, 360-degree rotating MMCX connector\u003c\/li\u003e\n\u003cli\u003eHigh 119 dB SPL\/mW sensitivity for low-signal sources\u003c\/li\u003e\n\u003cli\u003eFit kit with soft-flex, foam, and triple-flange sleeves in S, M, L\u003c\/li\u003e\n\u003cli\u003eClear housing (CL finish) and carrying case included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransducer type: triple balanced-armature drivers\u003c\/li\u003e\n\u003cli\u003eFrequency range: 18 Hz – 19 kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 119 dB SPL\/mW at 1 kHz\u003c\/li\u003e\n\u003cli\u003eImpedance: 36 Ω at 1 kHz\u003c\/li\u003e\n\u003cli\u003eNoise attenuation: up to 37 dB\u003c\/li\u003e\n\u003cli\u003eCable length: 162 cm (64 in)\u003c\/li\u003e\n\u003cli\u003eOutput connector: gold-plated 3.5mm, 6.3mm adapter included\u003c\/li\u003e\n\u003cli\u003eNet weight: approximately 30 g\u003c\/li\u003e\n\u003cli\u003eManufacturer warranty: 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SHURE","offers":[{"title":"Default Title","offer_id":54207567626577,"sku":"60581","price":548.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/ShureSE535-CL-EFS1.jpg?v=1783854014"},{"product_id":"shure-slxd24de-b58-g59","title":"Shure SLXD24DE\/B58-G59","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eShure SLXD24DE\/B58-G59\u003c\/strong\u003e – dual-channel digital wireless system with an SLXD4D receiver and two SLXD2 handheld transmitters fitted with Beta 58A capsules, operating in the G59 band (470-514 MHz).\n\nThe system runs on 24-bit digital conversion with a 20 Hz to 20 kHz frequency response and dynamic range exceeding 120 dB, so two independent vocal channels stay clean across a wide range of input levels without added coloration. The SLXD4D receiver packs two channels into a single half-rack chassis, cutting the rack space needed when running several wireless systems from the same FOH position. The SLXD2\/B58 transmitters use the Beta 58A supercardioid capsule, valued for its rejection of stage monitor bleed and resistance to feedback when working close to loud sources.\n\n\u003ch3\u003eSpectrum management with multiple systems on site\u003c\/h3\u003e\nThe G59 band offers 44 MHz of tuning bandwidth and up to 32 compatible frequencies, enough headroom to run a dozen or more independent systems within a single TV channel without mutual interference. Frequency scan and IR sync let you pair a transmitter to the receiver in seconds, without manually keying in frequencies on each unit. Digital predictive switching diversity moves between receiver antennas before a dropout occurs, which matters in venues with heavy RF reflection, such as convention centers or houses of worship.\n\n\u003ch3\u003ePower built for long events\u003c\/h3\u003e\nThe SLXD2 transmitters run on either two AA batteries or the SB903 lithium-ion rechargeable pack, delivering up to 8 hours from a single charge or battery set. That covers full-day conferences or multi-hour services where swapping batteries mid-event isn't an option. The all-metal build on both receiver and transmitters holds up to fixed installation duty as well as rental use, where gear passes through different hands and venues.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual-channel SLXD4D receiver in a half-rack chassis\u003c\/li\u003e\n\u003cli\u003eTwo SLXD2 handheld transmitters with Beta 58A supercardioid capsules\u003c\/li\u003e\n\u003cli\u003eDigital predictive switching diversity with automatic antenna switching\u003c\/li\u003e\n\u003cli\u003eFrequency scan and IR sync setup\u003c\/li\u003e\n\u003cli\u003ePowered by 2 AA batteries or SB903 rechargeable pack (up to 8 hours)\u003c\/li\u003e\n\u003cli\u003eG59 frequency band: 470-514 MHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSystem type: two-channel digital wireless system\u003c\/li\u003e\n\u003cli\u003eAudio conversion: 24-bit \/ 48 kHz\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 Hz - 20 kHz\u003c\/li\u003e\n\u003cli\u003eDynamic range: greater than 120 dB\u003c\/li\u003e\n\u003cli\u003eRF tuning bandwidth: 44 MHz\u003c\/li\u003e\n\u003cli\u003eCompatible frequencies: up to 32 per band\u003c\/li\u003e\n\u003cli\u003eSystem count: up to 10 per 6 MHz TV channel, up to 12 per 8 MHz channel\u003c\/li\u003e\n\u003cli\u003eMicrophone capsule: Beta 58A, dynamic supercardioid\u003c\/li\u003e\n\u003cli\u003eTransmitter power: 2 x AA batteries or SB903 rechargeable pack\u003c\/li\u003e\n\u003cli\u003eOperating time: up to 8 hours\u003c\/li\u003e\n\u003cli\u003eFrequency band: G59, 470-514 MHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SHURE","offers":[{"title":"Default Title","offer_id":54207568118097,"sku":"60577","price":1878.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/ShureSLXD24DE_B58-G59.jpg?v=1783854008"},{"product_id":"shure-se425-cl-efs","title":"Shure SE425-CL-EFS","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eShure SE425-CL-EFS\u003c\/strong\u003e – dual balanced-armature in-ear monitors built for stage and studio use.\n\nThe design pairs a dedicated tweeter and woofer through an integrated passive crossover, splitting the frequency band to keep highs and lows well defined even at extended listening levels. The CL finish uses a clear housing, and the detachable MMCX cable makes the SE425-CL-EFS a practical tool for touring musicians and engineers running in-ear systems.\n\n\u003ch3\u003eBlocking stage noise without cranking the mix\u003c\/h3\u003e\nPassive isolation rated up to 37 dB lets you run a lower monitor level while still hearing your own mix clearly. That translates into less cumulative ear fatigue across long rehearsals and shows, plus cleaner separation from drums, backline bleed, and crowd noise. Sleeve fit drives both isolation and low-end response, so the box includes foam, silicone, and triple-flange tips across three sizes to dial in a seal for different ear shapes.\n\n\u003ch3\u003eField-serviceable cable, no downtime\u003c\/h3\u003e\nThe locking MMCX connector allows a cable swap on the spot if a connector or strain point fails, without sending the earphones out for repair. The formable over-ear section keeps the housings anchored during movement onstage, and reinforced strain relief at the connector reduces the odds of a break from routine coiling and cable management. A gold-plated 3.5mm plug plus the included 6.3mm adapter cover both wireless in-ear receivers and standard studio outputs.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual balanced-armature drivers (dedicated tweeter and woofer) with passive crossover\u003c\/li\u003e\n\u003cli\u003ePassive noise isolation up to 37 dB\u003c\/li\u003e\n\u003cli\u003eDetachable MMCX cable with locking, 360-degree rotating connector\u003c\/li\u003e\n\u003cli\u003eFormable over-ear cable section for a secure fit\u003c\/li\u003e\n\u003cli\u003eFit kit with foam, silicone, and triple-flange sleeves in S, M, L\u003c\/li\u003e\n\u003cli\u003eClear housing (CL finish) and carrying case included\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransducer type: dual balanced-armature drivers\u003c\/li\u003e\n\u003cli\u003eFrequency range: 20 Hz – 19 kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 109 dB SPL\/mW at 1 kHz\u003c\/li\u003e\n\u003cli\u003eImpedance: 22 Ω at 1 kHz\u003c\/li\u003e\n\u003cli\u003eNoise attenuation: up to 37 dB\u003c\/li\u003e\n\u003cli\u003eCable length: 162 cm (64 in)\u003c\/li\u003e\n\u003cli\u003eOutput connector: gold-plated 3.5mm, 6.3mm adapter included\u003c\/li\u003e\n\u003cli\u003eNet weight: approximately 30 g\u003c\/li\u003e\n\u003cli\u003eManufacturer warranty: 2 years\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SHURE","offers":[{"title":"Default Title","offer_id":54207568150865,"sku":"59450","price":282.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/ShureSE425-CL-EFS1.jpg?v=1783853993"}],"url":"https:\/\/wrdtunes.com\/en-fr\/collections\/shure.oembed","provider":"Wired Tunes","version":"1.0","type":"link"}