{"product_id":"solton-aart-t-215-a","title":"Solton aart T-215 A","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eSolton aart T-215 A\u003c\/strong\u003e is an active two-way bi-amped fullrange cabinet running two 15\" Neodymium aaCRAAFT woofers and a Neodymium compression HF driver, powered by a 1400 W continuous \/ 5600 W peak Class D bi-amp module. Designed as a high-output main system top cabinet for large venues and outdoor stages — where a single 15\" runs out of SPL headroom — the dual-15\" configuration delivers a real 6–8 dB gain over conventional single-15\" systems without a proportional increase in size or weight.\u003c\/p\u003e\n\n  \u003ch3\u003eDual 15\" Neodymium drivers and FIR DSP — output and precision in one box\u003c\/h3\u003e\n  \u003cp\u003eTwo 15\" aaCRAAFT Neodymium woofers on 3\" voice coils operate in a birch plywood bass-reflex enclosure, extending to 45 Hz (-10 dB) with controlled, punchy low-end that handles smaller events without a dedicated subwoofer. The Neodymium HF compression driver on a 3\" voice coil covers the top end — Neodymium magnet keeps moving mass low and improves transient resolution in the presence and air range. The advanced DSP uses FIR filtering for phase correction at crossover points, which conventional IIR filters cannot achieve — the result is consistent phase across the full coverage angle and tighter stereo imaging in wider arrays. Limiter, over-voltage protection and PFC (power factor correction) guard the electronics against unstable mains supply on stages and outdoor sites. The 90° x 70° coverage pattern provides broader vertical throw than the standard 60° found on conventional tops — useful when the cabinet is mounted high or angled back.\u003c\/p\u003e\n\n  \u003ch3\u003e33 kg and 410 x 940 x 450 mm — mobile alternative to heavy systems\u003c\/h3\u003e\n  \u003cp\u003eAt 33 kg and compact dimensions for a dual-15\" cabinet, the aart T-215 A is manageable for one person — in clear contrast to typical passive 2x15\" cabinets that require separate amplifier racks and processors. Two side handles and M8 fixing points cover hand transport, stand mounting and stack configurations with a subwoofer. The officially recommended bass partner is the SUB 18 BPA — a combination that handles large events without stepping up to heavier and more expensive touring-class gear.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: active, 2-way bi-amp, fullrange\u003c\/li\u003e\n    \u003cli\u003eLF drivers: 2x 15\" Neodymium aaCRAAFT, 3\" voice coil\u003c\/li\u003e\n    \u003cli\u003eHF driver: Neodymium compression, 3\" voice coil\u003c\/li\u003e\n    \u003cli\u003ePower: 1400 W continuous \/ 5600 W peak, Class D\u003c\/li\u003e\n    \u003cli\u003eDSP with FIR filtering, limiter, over-voltage protection, PFC\u003c\/li\u003e\n    \u003cli\u003eFrequency range (-10 dB): 45 Hz – 20 kHz\u003c\/li\u003e\n    \u003cli\u003eCoverage: 90° H x 70° V\u003c\/li\u003e\n    \u003cli\u003eBass-reflex enclosure, birch plywood, polyurethane coating\u003c\/li\u003e\n    \u003cli\u003eDimensions: 410 x 940 x 450 mm; weight: 33 kg\u003c\/li\u003e\n    \u003cli\u003eRecommended subwoofer: SUB 18 BPA\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eArt. No.: 13109\u003c\/li\u003e\n    \u003cli\u003eType: self-powered, two-way bi-amped\u003c\/li\u003e\n    \u003cli\u003eLF driver: 2x 15\" Neodymium aaCRAAFT, 3\" voice coil\u003c\/li\u003e\n    \u003cli\u003eHF driver: Neodymium compression, 3\" voice coil\u003c\/li\u003e\n    \u003cli\u003ePower: 1400 W continuous \/ 5600 W peak\u003c\/li\u003e\n    \u003cli\u003eFrequency range (-10 dB): 45 Hz – 20 kHz\u003c\/li\u003e\n    \u003cli\u003eFrequency response (±3 dB): 55 Hz – 18 kHz\u003c\/li\u003e\n    \u003cli\u003eCoverage pattern: 90° H x 70° V nominal\u003c\/li\u003e\n    \u003cli\u003eProtection: limiter, over-voltage protection, PFC\u003c\/li\u003e\n    \u003cli\u003eActive features: volume, DSP (FIR), power switch\u003c\/li\u003e\n    \u003cli\u003eConnectors: XLR In\/Out, Power In\u003c\/li\u003e\n    \u003cli\u003eEnclosure: bass-reflex, birch plywood\u003c\/li\u003e\n    \u003cli\u003eFinish: black polyurethane coating\u003c\/li\u003e\n    \u003cli\u003eFittings: 2x handles, M8 fixing points\u003c\/li\u003e\n    \u003cli\u003eGrille: powder-coated black perforated steel with acoustic cloth\u003c\/li\u003e\n    \u003cli\u003eDimensions (WxHxD): 410 x 940 x 450 mm\u003c\/li\u003e\n    \u003cli\u003eWeight: 33 kg\u003c\/li\u003e\n    \u003cli\u003eEAN: 4262552320609\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Solton","offers":[{"title":"Default Title","offer_id":54125178782033,"sku":"60413","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/SoltonaartT-215A1.jpg?v=1782658991","url":"https:\/\/wrdtunes.com\/de\/products\/solton-aart-t-215-a","provider":"Wired Tunes","version":"1.0","type":"link"}