{"title":"Klotz","description":"","products":[{"product_id":"klotz-mid-018","title":"KLOTZ MID-018","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz MID-018\u003c\/strong\u003e is a 1.8-metre MIDI cable terminated with two DIN 5p 180° connectors featuring moulded plastic housings and gold-plated contacts. The four-conductor shielded core in a flexible PVC jacket carries MIDI data to the standard specification, with all five connector pins wired — pins 1 and 3 connected together to support DC power transfer where equipment requires it. The lightweight and flexible MID series construction works equally well for permanent rack studio wiring and mobile setups for rehearsals and live performance.\u003c\/p\u003e\n\n  \u003ch3\u003e1.8 metres and full pin wiring — MIDI between nearby devices without compromise\u003c\/h3\u003e\n  \u003cp\u003eOne and eight tenths of a metre covers the typical distances between units in adjacent rack slots, between a master keyboard and a sound module or MIDI interface on the same surface, and between a controller and a computer via a MIDI interface with DIN sockets. Full five-pin wiring means the cable handles both standard MIDI data transmission on pins 4 and 5 and DC power transfer via pins 1 and 3 in equipment that supports the MIDI Power protocol — eliminating the need for separate power cables to devices that accept bus power over MIDI. Gold-plated contacts maintain stable, low contact resistance through repeated mate-unmate cycles.\u003c\/p\u003e\n\n  \u003ch3\u003eFlexible PVC jacket and moulded housings — solid mechanics in a compact form\u003c\/h3\u003e\n  \u003cp\u003eMoulded plastic DIN connector housings integrate strain relief and anti-kink protection in a single form factor, removing the need for separate sleeves or heat-shrink at the cable exit point. The flexible PVC jacket retains free bending through repeated coiling and uncoiling without developing a fixed loop shape — relevant for a cable that regularly moves between a studio, rehearsal room, and stage. The lightweight MID series construction places minimal additional load on DIN sockets in devices with rear connector panels when mounted vertically in a rack.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eMIDI cable with all 5 DIN pins wired — supports data transmission and DC power transfer\u003c\/li\u003e\n    \u003cli\u003ePins 1 and 3 connected — compatible with MIDI Power devices\u003c\/li\u003e\n    \u003cli\u003eGold-plated contacts — stable contact resistance across repeated connections\u003c\/li\u003e\n    \u003cli\u003eMoulded plastic DIN housings with anti-kink protection and strain relief\u003c\/li\u003e\n    \u003cli\u003eFlexible PVC jacket — free bending, resists loop memory\u003c\/li\u003e\n    \u003cli\u003eLightweight construction — minimal load on DIN sockets in rack-mounted equipment\u003c\/li\u003e\n    \u003cli\u003e1.8 m length — optimal reach between closely positioned devices\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: MID-018\u003c\/li\u003e\n    \u003cli\u003eSeries: MID\u003c\/li\u003e\n    \u003cli\u003eType: MIDI cable\u003c\/li\u003e\n    \u003cli\u003eLength: 1.8 m\u003c\/li\u003e\n    \u003cli\u003eCable color: black\u003c\/li\u003e\n    \u003cli\u003eCore: 4-conductor + shield\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: flexible PVC\u003c\/li\u003e\n    \u003cli\u003eConnector 1: DIN 5p 180°, moulded plastic housing\u003c\/li\u003e\n    \u003cli\u003eConnector 2: DIN 5p 180°, moulded plastic housing\u003c\/li\u003e\n    \u003cli\u003eContacts: gold-plated\u003c\/li\u003e\n    \u003cli\u003ePin wiring: all 5 pins; pins 1+3 connected (DC power)\u003c\/li\u003e\n    \u003cli\u003eConnector housing: moulded plastic with anti-kink protection\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53927675560273,"sku":"60183","price":11.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZMID-018_37ee663f-3cd6-4875-a438-56ad4826ad57.jpg?v=1780504368"},{"product_id":"klotz-kik3-0ppsw","title":"KLOTZ KIK3.0PPSW","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz KIK3.0PPSW\u003c\/strong\u003e is a 3-metre instrument cable from the KIK series, terminated with two straight 6.35 mm TS jack plugs in black shells with flexible studded rubber sleeves. The KIK cable core — 6.1 mm diameter, 99.95% ETP oxygen-free copper — uses double shielding combining conductive plastic and a copper spiral shield, holding capacitance to 115 pF\/m. The solid strain relief element withstands forces exceeding 200 N, protecting internal solder joints against mechanical stress from accidental cable pulls.\u003c\/p\u003e\n\n  \u003ch3\u003e3 metres — instrument to amplifier or interface in a small room\u003c\/h3\u003e\n  \u003cp\u003eThree metres covers the typical distances in a rehearsal room with the amplifier positioned a few steps from the player, in a home studio with the audio interface set apart from the playing position, and on a small stage with a monitor placed just behind the instrumentalist. At 115 pF\/m, total capacitance for 3 m is 345 pF — a figure that with humbucker pickups and active pickup systems produces no audible tonal change, and with high-impedance single-coil pickups remains within the range where any frequency response shift is marginal and dependent on the guitar's tone control setting rather than the cable alone. The dual-layer shielding — conductive plastic inside, copper spiral outside — eliminates the influence of electromagnetic interference from effect power supplies, stage lighting, and wireless systems on the short signal path.\u003c\/p\u003e\n\n  \u003ch3\u003eFlexible sleeve and 200 N strain relief — daily reliability under any conditions\u003c\/h3\u003e\n  \u003cp\u003eThe flexible studded rubber sleeve at the cable-to-plug junction replaces rigid heat-shrink and allows bending at a short radius without stressing the conductor at the solder point — relevant at jack sockets on the underside or side of guitars with unconventional body profiles and at tightly packed effect inputs on a pedalboard. Strain relief rated above 200 N protects internal connections against the mechanical stress of accidental cable treading or sudden pulls. The lead-free PVC jacket retains flexibility across a wide temperature range and does not stiffen with repeated coiling during tours and rehearsals.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eDouble shielding: conductive plastic + copper spiral shield — effective EMI rejection\u003c\/li\u003e\n    \u003cli\u003e115 pF\/m capacitance — 345 pF total at 3 m, safe parameters for humbuckers and single-coils\u003c\/li\u003e\n    \u003cli\u003e99.95% ETP oxygen-free copper core — low resistance, high signal purity\u003c\/li\u003e\n    \u003cli\u003eStrain relief rated above 200 N — protects internal solder joints from mechanical stress\u003c\/li\u003e\n    \u003cli\u003eFlexible studded rubber sleeve — free bending at sockets of varying geometry\u003c\/li\u003e\n    \u003cli\u003eLead-free PVC outer jacket, 6.1 mm diameter — durable and flexible across a wide temperature range\u003c\/li\u003e\n    \u003cli\u003eStraight-to-straight configuration — two TS jack 6.35 mm plugs with black shells\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: KIK3.0PPSW\u003c\/li\u003e\n    \u003cli\u003eSeries: KIK\u003c\/li\u003e\n    \u003cli\u003eCategory: professional instrument\u003c\/li\u003e\n    \u003cli\u003eLength: 3 m\u003c\/li\u003e\n    \u003cli\u003eCable color: black\u003c\/li\u003e\n    \u003cli\u003eCable type: KIK, diameter 6.1 mm, ETP oxygen-free copper 99.95%\u003c\/li\u003e\n    \u003cli\u003eShielding: double — conductive plastic + copper spiral shield\u003c\/li\u003e\n    \u003cli\u003eCapacitance: 115 pF\/m (35 pF\/ft)\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: lead-free PVC\u003c\/li\u003e\n    \u003cli\u003eConnector 1: jack 2p TS 6.35 mm, straight, black shell\u003c\/li\u003e\n    \u003cli\u003eConnector 2: jack 2p TS 6.35 mm, straight, black shell\u003c\/li\u003e\n    \u003cli\u003eContacts: nickel-plated\u003c\/li\u003e\n    \u003cli\u003eSleeve: flexible studded rubber, short bending radius\u003c\/li\u003e\n    \u003cli\u003eStrain relief: above 200 N\u003c\/li\u003e\n    \u003cli\u003eJack manufacturer: KLOTZ\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53927754760529,"sku":"60185","price":19.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZKIK3.0PPSW1_7d594833-0e3c-43f5-be8f-9b3091478b1d.jpg?v=1780504360"},{"product_id":"klotz-kik1-5ppsw","title":"KLOTZ KIK1.5PPSW","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz KIK1.5PPSW\u003c\/strong\u003e is a 1.5-metre instrument cable from the KIK series, terminated with two straight 6.35 mm TS jack plugs in black shells with flexible studded rubber sleeves. The KIK cable core — 6.1 mm diameter, 99.95% ETP oxygen-free copper — uses double shielding combining conductive plastic and a copper spiral shield, holding capacitance to 115 pF\/m. The solid strain relief element withstands forces exceeding 200 N, protecting internal solder joints against mechanical stress.\u003c\/p\u003e\n\n  \u003ch3\u003e1.5 metres — pedalboard connections and short instrument runs\u003c\/h3\u003e\n  \u003cp\u003eOne and a half metres suits applications where minimum cable length is the priority — connecting a guitar to the first effect on a pedalboard, running from the last effect to an amplifier positioned directly beside the player, or linking a keyboard instrument to an audio interface on the same stand or surface. At 115 pF\/m, total capacitance for 1.5 m is just 172 pF — a figure that with high-impedance single-coil pickups produces negligible frequency response change, preserving the maximum brightness and openness in the upper register that these pickups deliver at source. The dual-layer shielding — conductive plastic inside, copper spiral outside — provides effective EMI rejection from effect unit power supplies and wireless receivers operating immediately adjacent to the pedalboard, all sources of audible interference in poorly shielded short cables.\u003c\/p\u003e\n\n  \u003ch3\u003eFlexible sleeve and 200 N strain relief — mechanical reliability under intensive use\u003c\/h3\u003e\n  \u003cp\u003eThe flexible studded rubber sleeve at the cable-to-plug junction allows the cable to bend at a short radius without stressing the conductor at the solder point — relevant when plugging into jack sockets on the underside or side of guitars with unconventional body profiles, and at effect inputs where space around the socket is restricted. Strain relief rated above 200 N protects internal solder connections against the mechanical stress of accidental cable treading on the pedalboard or sudden pulls during movement on stage. The lead-free PVC jacket retains flexibility regardless of ambient temperature.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eDouble shielding: conductive plastic + copper spiral shield — effective EMI rejection\u003c\/li\u003e\n    \u003cli\u003e115 pF\/m capacitance — 172 pF total at 1.5 m, minimal tonal impact with single-coil pickups\u003c\/li\u003e\n    \u003cli\u003e99.95% ETP oxygen-free copper core — low resistance, high signal purity\u003c\/li\u003e\n    \u003cli\u003eStrain relief rated above 200 N — protects internal solder joints from mechanical stress\u003c\/li\u003e\n    \u003cli\u003eFlexible studded rubber sleeve — free bending at sockets of varying geometry\u003c\/li\u003e\n    \u003cli\u003eLead-free PVC outer jacket, 6.1 mm diameter — durable and flexible\u003c\/li\u003e\n    \u003cli\u003eStraight-to-straight configuration — two TS jack 6.35 mm plugs with black shells\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: KIK1.5PPSW\u003c\/li\u003e\n    \u003cli\u003eSeries: KIK\u003c\/li\u003e\n    \u003cli\u003eCategory: professional instrument\u003c\/li\u003e\n    \u003cli\u003eLength: 1.5 m\u003c\/li\u003e\n    \u003cli\u003eCable color: black\u003c\/li\u003e\n    \u003cli\u003eCable type: KIK, diameter 6.1 mm, ETP oxygen-free copper 99.95%\u003c\/li\u003e\n    \u003cli\u003eShielding: double — conductive plastic + copper spiral shield\u003c\/li\u003e\n    \u003cli\u003eCapacitance: 115 pF\/m (35 pF\/ft)\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: lead-free PVC\u003c\/li\u003e\n    \u003cli\u003eConnector 1: jack 2p TS 6.35 mm, straight, black shell\u003c\/li\u003e\n    \u003cli\u003eConnector 2: jack 2p TS 6.35 mm, straight, black shell\u003c\/li\u003e\n    \u003cli\u003eContacts: nickel-plated\u003c\/li\u003e\n    \u003cli\u003eSleeve: flexible studded rubber, short bending radius\u003c\/li\u003e\n    \u003cli\u003eStrain relief: above 200 N\u003c\/li\u003e\n    \u003cli\u003eJack manufacturer: KLOTZ\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53927758135633,"sku":"60194","price":16.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZKIK1.5PPSW1_2df43163-3af8-43af-9112-1089d438440b.jpg?v=1780504352"},{"product_id":"klotz-ay5-0100","title":"KLOTZ AY5-0100","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz AY5-0100\u003c\/strong\u003e is a 1-metre Y cable from the AY5 lightweight series, terminated with a 3.5 mm TRS mini jack on the source end and two TS jack 6.35 mm mono plugs on the output ends for left and right channels. The PCU201-Z cable — 3.8 mm conductor diameter, 7.6 mm overall diameter, flexible PVC jacket — splits a stereo signal into two independent mono channels. Moulded plastic connector sleeves with colour coding protect the cable-to-plug junction, and 24-carat gold-plated contacts minimise transition losses at every connection.\u003c\/p\u003e\n\n  \u003ch3\u003e1 metre — minimal cabling when devices are in close proximity\u003c\/h3\u003e\n  \u003cp\u003eOne metre suits configurations where the mobile device — smartphone, tablet, or laptop — sits directly beside an audio interface with TS 6.35 mm inputs, a mixer with jack line inputs, or an amplifier on the same surface. It eliminates excess cable in close-proximity setups and reduces entanglement with other cables on a densely wired workstation. The TRS-to-TS conversion is correct: the tip of the mini jack (left stereo channel) routes to the tip of the left 6.35 mm jack, and the ring (right channel) routes to the tip of the right jack. Colour-coded 6.35 mm jack plugs allow error-free channel connection even in poor lighting or without checking equipment labelling.\u003c\/p\u003e\n\n  \u003ch3\u003eLightweight PCU201-Z construction — flexibility and minimal socket load\u003c\/h3\u003e\n  \u003cp\u003eThe PCU201-Z cable in PVC jacket retains flexibility through repeated coiling without developing a fixed loop shape — relevant for a short cable that is regularly packed and uncoiled when moving a kit. Moulded plastic sleeves on both plugs prevent mechanical stress concentration when the cable or connector is pulled, extending the service life of the internal solder connections. The very low weight of the AY5 series reduces the mechanical load on the device's mini jack socket in permanent connections without additional cable support — particularly relevant with smartphones whose audio sockets are positioned on the side or bottom of the device.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e3.5 mm TRS (stereo) to 2x TS jack 6.35 mm (mono L+R) — stereo signal splitting\u003c\/li\u003e\n    \u003cli\u003e24-carat gold-plated contacts — minimal transition losses, corrosion-resistant\u003c\/li\u003e\n    \u003cli\u003ePCU201-Z cable, 3.8 mm conductor \/ 7.6 mm outer diameter — flexible and durable\u003c\/li\u003e\n    \u003cli\u003eMoulded plastic connector sleeves with colour coding — L\/R channel identification\u003c\/li\u003e\n    \u003cli\u003ePVC outer jacket — flexible, resists loop memory\u003c\/li\u003e\n    \u003cli\u003eLightweight construction — minimal load on device mini jack socket\u003c\/li\u003e\n    \u003cli\u003eCompatible with any device equipped with a 3.5 mm stereo jack socket\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: AY5-0100\u003c\/li\u003e\n    \u003cli\u003eEAN: 4250046823217\u003c\/li\u003e\n    \u003cli\u003eSeries: AY5 (Y cable lightweight)\u003c\/li\u003e\n    \u003cli\u003eLength: 1 m\u003c\/li\u003e\n    \u003cli\u003eCable color: black\u003c\/li\u003e\n    \u003cli\u003eCable type: PCU201-Z, conductor diameter 3.8 mm, outer diameter 7.6 mm\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: PVC\u003c\/li\u003e\n    \u003cli\u003eConnector 1: mini jack 3p TRS 3.5 mm — stereo input end\u003c\/li\u003e\n    \u003cli\u003eConnector 2a: jack 2p TS 6.35 mm (L)\u003c\/li\u003e\n    \u003cli\u003eConnector 2b: jack 2p TS 6.35 mm (R)\u003c\/li\u003e\n    \u003cli\u003eContacts: 24-carat gold-plated\u003c\/li\u003e\n    \u003cli\u003eSleeves: moulded plastic, colour-coded\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53928327840081,"sku":"60206","price":10.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZAY5-0100_7331a3c1-f813-4ebf-9a92-feafbe2d3f96.jpg?v=1780504342"},{"product_id":"klotz-ay5-0300","title":"KLOTZ AY5-0300","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz AY5-0300\u003c\/strong\u003e is a 3-metre Y cable from the AY5 lightweight series, terminated with a 3.5 mm TRS mini jack on the source end and two TS jack 6.35 mm mono plugs on the output ends for left and right channels. The PCU201-Z cable — 3.8 mm conductor diameter, 7.6 mm overall diameter, flexible PVC jacket — splits a stereo signal into two independent mono channels. Moulded plastic connector sleeves with colour coding protect the cable-to-plug junction, and 24-carat gold-plated contacts minimise transition losses at every connection.\u003c\/p\u003e\n\n  \u003ch3\u003eMini jack TRS to 2x jack TS 6.35 mm — stereo signal from mobile sources into instrument-level inputs\u003c\/h3\u003e\n  \u003cp\u003eThe AY5 addresses the common interface mismatch between mobile devices and studio or stage equipment equipped with 6.35 mm jack inputs: the 3.5 mm TRS stereo output of a smartphone, laptop, tablet, or portable audio interface does not connect directly to the line inputs of an amplifier, audio interface with TS 6.35 mm inputs, mixers with jack line inputs, or mono monitor systems. Three metres covers typical distances in home recording setups, on stage when mixing from a mobile device, and in rehearsal configurations with monitors positioned several metres from the listening position. The TRS-to-TS conversion is correct: the left stereo channel (tip of the mini jack) routes to the tip of the left 6.35 mm jack, and the right channel (ring of the mini jack) routes to the tip of the right jack.\u003c\/p\u003e\n\n  \u003ch3\u003eLightweight PCU201-Z construction and colour-coded plugs — clean routing without errors\u003c\/h3\u003e\n  \u003cp\u003eThe PCU201-Z dual-conductor cable in PVC jacket retains flexibility through repeated coiling and uncoiling without developing a fixed loop shape — relevant when equipment is moved regularly between sessions. Moulded plastic connector sleeves create a smooth mechanical transition that prevents stress concentration when the cable or plug is pulled. Colour-coded 6.35 mm jack plugs — with one plug in a contrasting colour marking the right or left channel — allow fast, accurate connection without checking equipment labelling. The low overall weight of the cable reduces mechanical load on the device's mini jack socket in permanent connections without additional cable support.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e3.5 mm TRS (stereo) to 2x TS jack 6.35 mm (mono L+R) — stereo signal splitting\u003c\/li\u003e\n    \u003cli\u003e24-carat gold-plated contacts — minimal transition losses, corrosion-resistant\u003c\/li\u003e\n    \u003cli\u003ePCU201-Z cable, 3.8 mm conductor \/ 7.6 mm outer diameter — flexible and durable\u003c\/li\u003e\n    \u003cli\u003eMoulded plastic connector sleeves with colour coding — L\/R channel identification\u003c\/li\u003e\n    \u003cli\u003ePVC outer jacket — flexible, resists loop memory\u003c\/li\u003e\n    \u003cli\u003eLightweight construction — minimal load on device mini jack socket\u003c\/li\u003e\n    \u003cli\u003eCompatible with any device equipped with a 3.5 mm stereo jack socket\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: AY5-0300\u003c\/li\u003e\n    \u003cli\u003eEAN: 4250046823095\u003c\/li\u003e\n    \u003cli\u003eSeries: AY5 (Y cable lightweight)\u003c\/li\u003e\n    \u003cli\u003eLength: 3 m\u003c\/li\u003e\n    \u003cli\u003eCable color: black\u003c\/li\u003e\n    \u003cli\u003eCable type: PCU201-Z, conductor diameter 3.8 mm, outer diameter 7.6 mm\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: PVC\u003c\/li\u003e\n    \u003cli\u003eConnector 1: mini jack 3p TRS 3.5 mm — stereo input end\u003c\/li\u003e\n    \u003cli\u003eConnector 2a: jack 2p TS 6.35 mm (L)\u003c\/li\u003e\n    \u003cli\u003eConnector 2b: jack 2p TS 6.35 mm (R)\u003c\/li\u003e\n    \u003cli\u003eContacts: 24-carat gold-plated\u003c\/li\u003e\n    \u003cli\u003eSleeves: moulded plastic, colour-coded\u003c\/li\u003e\n    \u003cli\u003eWeight: 200 g\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53928328003921,"sku":"60197","price":13.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZAY5-03001_2daf6ebb-b6bb-4a1e-9ba9-98322cdcc683.jpg?v=1780504334"},{"product_id":"klotz-ay7-0100","title":"KLOTZ AY7-0100","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz AY7-0100\u003c\/strong\u003e is a 1-metre Y cable from the AY7 lightweight series, terminated with a 3.5 mm TRS mini jack on the source end and two RCA plugs on the output ends for left and right channels. The PCU201-Z cable — 3.8 mm conductor diameter, 7.6 mm overall diameter, flexible PVC jacket — splits a stereo signal into two independent mono channels. Moulded plastic connector sleeves with anti-kink and strain relief protection secure the cable-to-plug junction, and 24-carat gold-plated contacts minimise transition losses at every connection.\u003c\/p\u003e\n\n  \u003ch3\u003e1 metre — clean routing when devices are close together\u003c\/h3\u003e\n  \u003cp\u003eOne metre suits configurations where the mobile device sits directly next to the amplifier, RCA-equipped audio interface, or hi-fi system — on the same surface, shelf, or DJ stand. It eliminates the excess cable typical of a standard 3-metre variant in close-proximity setups, keeping the workspace tidy and reducing entanglement with other cables. The 24-carat gold-plated contacts ensure a stable signal transition from the 3.5 mm TRS stereo output of a smartphone, tablet, laptop, or portable player to the RCA inputs of the receiving device. Colour-coded RCA plug shells allow immediate channel identification without consulting labelling or documentation, relevant when connecting and disconnecting frequently.\u003c\/p\u003e\n\n  \u003ch3\u003eLightweight PCU201-Z construction — flexibility without loop memory\u003c\/h3\u003e\n  \u003cp\u003eThe PCU201-Z cable in PVC jacket retains flexibility through repeated coiling and uncoiling without developing a fixed loop shape — a relevant characteristic for a short cable that is regularly coiled and uncoiled when moving equipment. Moulded plastic sleeves on both the mini jack and RCA connectors create a smooth mechanical transition that prevents stress concentration at a single point when the plug or cable is pulled accidentally. The low overall weight of the AY7 series reduces the mechanical load on the device's mini jack socket, which matters in permanent connections without additional cable support.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e3.5 mm TRS (stereo) to 2x RCA\/cinch (mono L+R) — stereo signal splitting\u003c\/li\u003e\n    \u003cli\u003e24-carat gold-plated contacts — minimal transition losses, corrosion-resistant\u003c\/li\u003e\n    \u003cli\u003ePCU201-Z cable, 3.8 mm conductor \/ 7.6 mm outer diameter — flexible and durable\u003c\/li\u003e\n    \u003cli\u003eMoulded plastic connector sleeves with anti-kink protection and strain relief\u003c\/li\u003e\n    \u003cli\u003eColour-coded RCA plugs — fast left\/right channel identification\u003c\/li\u003e\n    \u003cli\u003ePVC outer jacket — flexible, resists loop memory\u003c\/li\u003e\n    \u003cli\u003eLightweight construction — minimal load on device mini jack socket\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: AY7-0100\u003c\/li\u003e\n    \u003cli\u003eEAN: 4250046823330\u003c\/li\u003e\n    \u003cli\u003eSeries: AY7 (Y cable lightweight)\u003c\/li\u003e\n    \u003cli\u003eLength: 1 m\u003c\/li\u003e\n    \u003cli\u003eCable color: black\u003c\/li\u003e\n    \u003cli\u003eCable type: PCU201-Z, conductor diameter 3.8 mm, outer diameter 7.6 mm\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: PVC\u003c\/li\u003e\n    \u003cli\u003eConnector 1: mini jack 3p TRS 3.5 mm — stereo input end\u003c\/li\u003e\n    \u003cli\u003eConnector 2a: RCA\/cinch (L)\u003c\/li\u003e\n    \u003cli\u003eConnector 2b: RCA\/cinch (R)\u003c\/li\u003e\n    \u003cli\u003eContacts: 24-carat gold-plated\u003c\/li\u003e\n    \u003cli\u003eSleeves: moulded plastic, colour-coded, anti-kink + strain relief\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53928328036689,"sku":"60193","price":11.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZAY7-01001_5233095e-05ed-44eb-890a-6be458e22cfa.jpg?v=1780504321"},{"product_id":"klotz-ay7-0300","title":"KLOTZ AY7-0300","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz AY7-0300\u003c\/strong\u003e is a 3-metre Y cable from the AY7 lightweight series, terminated with a 3.5 mm TRS mini jack on the source end and two RCA plugs on the output ends for left and right channels. The PCU201-Z cable — 3.8 mm conductor diameter, 7.6 mm overall diameter, flexible PVC jacket — splits a stereo signal into two independent mono channels. Moulded plastic connector sleeves with anti-kink and strain relief protection secure the cable-to-plug junction, and 24-carat gold-plated contacts on both connector types minimise transition losses at every connection.\u003c\/p\u003e\n\n  \u003ch3\u003eMini jack to RCA — stereo signal from mobile devices into analogue inputs\u003c\/h3\u003e\n  \u003cp\u003eThe AY7 addresses the most common interface mismatch between mobile devices and professional or consumer audio equipment: the 3.5 mm TRS stereo output of a smartphone, tablet, laptop, or portable player does not connect directly to the RCA inputs of an amplifier, active monitor with cinch inputs, hi-fi system, or audio interface with analogue RCA sockets. Three metres provides enough reach for typical home and studio setups — from a laptop on a desk to monitors positioned several metres away, or from a DJ's phone to a mixer with RCA line inputs. Colour-coded RCA plug shells — conventionally red for the right channel, white or black for the left — prevent channel swap errors when connecting to stereo inputs on the receiving device.\u003c\/p\u003e\n\n  \u003ch3\u003eLightweight PCU201-Z construction — flexibility without memory\u003c\/h3\u003e\n  \u003cp\u003eThe PCU201-Z dual-conductor cable in PVC jacket retains flexibility through repeated coiling and uncoiling without developing a fixed loop shape. Moulded plastic connector sleeves on both the mini jack and RCA ends create a smooth, continuous cable-to-connector transition that distributes mechanical stress rather than concentrating it at the plug exit point. The AY7 series is significantly lighter than cables with heavy metal shells, reducing the mechanical load on the mini jack socket of a mobile device during extended listening or recording sessions.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e3.5 mm TRS (stereo) to 2x RCA\/cinch (mono L+R) — stereo signal splitting\u003c\/li\u003e\n    \u003cli\u003e24-carat gold-plated contacts — minimal transition losses, corrosion-resistant\u003c\/li\u003e\n    \u003cli\u003ePCU201-Z cable, 3.8 mm conductor \/ 7.6 mm outer diameter — flexible and durable\u003c\/li\u003e\n    \u003cli\u003eMoulded plastic connector sleeves with anti-kink protection and strain relief\u003c\/li\u003e\n    \u003cli\u003eColour-coded RCA plugs — fast left\/right channel identification\u003c\/li\u003e\n    \u003cli\u003ePVC outer jacket — flexible, resists loop memory\u003c\/li\u003e\n    \u003cli\u003eLightweight construction — minimal load on device mini jack socket\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: AY7-0300\u003c\/li\u003e\n    \u003cli\u003eEAN: 4250046823118\u003c\/li\u003e\n    \u003cli\u003eSeries: AY7 (Y cable lightweight)\u003c\/li\u003e\n    \u003cli\u003eLength: 3 m\u003c\/li\u003e\n    \u003cli\u003eCable color: black\u003c\/li\u003e\n    \u003cli\u003eCable type: PCU201-Z, conductor diameter 3.8 mm, outer diameter 7.6 mm\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: PVC\u003c\/li\u003e\n    \u003cli\u003eConnector 1: mini jack 3p TRS 3.5 mm — stereo input end\u003c\/li\u003e\n    \u003cli\u003eConnector 2a: RCA\/cinch (L)\u003c\/li\u003e\n    \u003cli\u003eConnector 2b: RCA\/cinch (R)\u003c\/li\u003e\n    \u003cli\u003eContacts: 24-carat gold-plated\u003c\/li\u003e\n    \u003cli\u003eSleeves: moulded plastic, colour-coded, anti-kink + strain relief\u003c\/li\u003e\n    \u003cli\u003eWeight: 200 g\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53928328200529,"sku":"60186","price":14.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZAY7-03001_91895726-777d-4dc2-b964-13962f249c5f.jpg?v=1780504313"},{"product_id":"klotz-dx10","title":"KLOTZ DX10","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz DX10\u003c\/strong\u003e is a passive DI-box made in Germany and the successor to the D10KL model. Its core component is a hand-wound transformer built in-house at KLOTZ AIS, using a 100% mu-metal core — a soft nickel-iron alloy with exceptional magnetic permeability — with a 6+6:1 winding ratio and a mu-metal shield for improved RF isolation. The stainless steel enclosure with laser-engraved labelling measures 103 x 75 x 49 mm. No external power supply or phantom power is required. The DX10 carries a 5-year warranty and passes a 6-stage quality inspection per ISO 9001:2015.\u003c\/p\u003e\n\n  \u003ch3\u003eIn-house mu-metal transformer — tonal neutrality as the design objective\u003c\/h3\u003e\n  \u003cp\u003eThe transformer is the defining component in any passive DI-box, exerting the greatest influence on signal fidelity and sonic character. KLOTZ developed the DX10 transformer entirely in-house, selecting mu-metal for its outstanding magnetic permeability — a property that minimises harmonic distortion to below 0.1% and delivers a flat frequency response of 10 Hz to 30 kHz (±0.3 dB). The mu-metal shield surrounding the transformer core provides effective isolation from RF interference generated by stage lighting, wireless systems, and other electronics in the live environment. The impedance conversion circuit transforms the high-impedance unbalanced output of a guitar, bass, or keyboard into a low-impedance balanced signal ready for long XLR cable runs without signal degradation.\u003c\/p\u003e\n\n  \u003ch3\u003eStainless steel enclosure and passive design — reliability without dependencies\u003c\/h3\u003e\n  \u003cp\u003eThe double U-profile 2 mm stainless steel enclosure with a hard-wearing finish and laser-engraved labelling withstands the mechanical demands of stage use without deformation or legibility loss. The instrument input and thru jack at 6.35 mm allow the DX10 to be inserted between a guitar and amplifier without interrupting the signal path to the instrument. The 20 dB pad switch raises the maximum input level to +30 dBu at 40 kΩ, handling high-output sources such as amplifier line outputs and active preamps. The ground-lift switch decouples XLR pin 1 from the output ground through an R-C network, eliminating ground loops without affecting the audio signal path.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003ePassive DI-box — no external power supply or phantom power required\u003c\/li\u003e\n    \u003cli\u003eHand-wound transformer by KLOTZ AIS — 100% mu-metal core, 6+6:1 ratio\u003c\/li\u003e\n    \u003cli\u003eMu-metal transformer shield — effective RF interference isolation\u003c\/li\u003e\n    \u003cli\u003eHarmonic distortion below 0.1% — neutral signal reproduction\u003c\/li\u003e\n    \u003cli\u003eFrequency response 10 Hz – 30 kHz (±0.3 dB) — wider than the audible range\u003c\/li\u003e\n    \u003cli\u003e20 dB pad switch — handles high-output sources up to +30 dBu\u003c\/li\u003e\n    \u003cli\u003eGround-lift switch — eliminates ground loops via R-C network\u003c\/li\u003e\n    \u003cli\u003e2 mm stainless steel housing with laser-engraved labelling — heavy-duty road construction\u003c\/li\u003e\n    \u003cli\u003eProduction: Germany (handmade); warranty: 5 years; quality assurance: ISO 9001:2015 (6 stages)\u003c\/li\u003e\n    \u003cli\u003eSuccessor to the D10KL model\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: DX10\u003c\/li\u003e\n    \u003cli\u003eEAN: 4250046865491\u003c\/li\u003e\n    \u003cli\u003eType: passive DI-box\u003c\/li\u003e\n    \u003cli\u003eColor: black\u003c\/li\u003e\n    \u003cli\u003eHousing: stainless steel, heavy duty, all-metal shell\u003c\/li\u003e\n    \u003cli\u003eDimensions: L 103 mm x W 75 mm x H 49 mm\u003c\/li\u003e\n    \u003cli\u003eUnbalanced input\/thru: 6.35 mm jack socket\u003c\/li\u003e\n    \u003cli\u003eBalanced output: XLR 3p male\u003c\/li\u003e\n    \u003cli\u003eMax. input level (pad OFF): +10 dBu (2.5 V) \/ 20 kΩ\u003c\/li\u003e\n    \u003cli\u003eMax. input level (pad 20 dB): +30 dBu (25 V) \/ 40 kΩ\u003c\/li\u003e\n    \u003cli\u003eMax. output level: -10 dBu (250 mV) \/ 200 Ω\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 10 Hz – 30 kHz (±0.3 dB)\u003c\/li\u003e\n    \u003cli\u003eHarmonic distortion: below 0.1%\u003c\/li\u003e\n    \u003cli\u003eTransformer: mu-metal core, 6+6:1 ratio, hand-wound by KLOTZ AIS\u003c\/li\u003e\n    \u003cli\u003eWarranty: 5 years\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53928328626513,"sku":"60205","price":93.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZDX101_f3ce2357-e39d-4dd9-a91c-339122dc5138.jpg?v=1780504301"},{"product_id":"klotz-grg1fm03-0","title":"KLOTZ GRG1FM03.0","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz GRG1FM03.0\u003c\/strong\u003e is a 3-metre microphone cable from the GREYHOUND series, terminated with KLOTZ XLR 3-pin female and male connectors featuring nickel-plated metal shells and nickel-plated contacts. The 2x 0.22 mm² (AWG 24) ETP oxygen-free copper core with spiral shielding and a rugged 6 mm diameter PVC jacket succeeds the GRK1FM series, updated in 2018 with a new metal XLR connector developed exclusively for the GREYHOUND line — featuring a shortened bushing and improved grip ergonomics. Designed in Germany, produced by KLOTZ AIS in China.\u003c\/p\u003e\n\n  \u003ch3\u003e3 metres — close-source and studio configurations\u003c\/h3\u003e\n  \u003cp\u003eThree metres covers the typical distances in small rehearsal rooms when the microphone is positioned directly near the interface or console input, in desktop recording setups, on small acoustic stages with microphones close to the stagebox, and as a spare cable in a technical kit. The 99.95% ETP oxygen-free copper core at 0.22 mm² — identical to the conductor specification used in higher-tier KLOTZ microphone cables — delivers reliable, low-loss microphone signal transmission without any electrical compromise resulting from the GREYHOUND series' simplified connector and production specification. Spiral shielding rejects electromagnetic interference from power supplies and stage lighting. The rugged 6 mm PVC jacket retains flexibility through intensive daily use without permanent kinking.\u003c\/p\u003e\n\n  \u003ch3\u003eMetal XLR shell and shortened bushing — fast connection under any conditions\u003c\/h3\u003e\n  \u003cp\u003eThe new metal XLR shell developed exclusively for the GREYHOUND GRG line differs from the previous GRK1FM version through a shorter bushing profile and improved grip geometry. In practice this means more confident single-handed connector seating with limited visibility — when setting up microphones in the dark before a show or working in the tight space around a stagebox. Nickel-plated contacts maintain stable, low contact resistance through repeated mate-unmate cycles, relevant when the cable is in continuous rotation as part of a rental inventory or a regular rehearsal kit.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e2x 0.22 mm² (AWG 24) ETP oxygen-free copper core — reliable microphone signal transmission\u003c\/li\u003e\n    \u003cli\u003eSpiral shielding — EMI rejection on stage and in rehearsal environments\u003c\/li\u003e\n    \u003cli\u003eRugged PVC outer jacket, 6 mm diameter — flexibility and durability under intensive use\u003c\/li\u003e\n    \u003cli\u003eKLOTZ metal XLR 3p connectors with nickel-plated shells — shortened bushing, improved grip\u003c\/li\u003e\n    \u003cli\u003eNickel-plated contacts — stable contact resistance across repeated connections\u003c\/li\u003e\n    \u003cli\u003eSuccessor to the GRK1FM series — improved connector mechanics, same core specification\u003c\/li\u003e\n    \u003cli\u003eDesign: Germany; production: KLOTZ AIS, China\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: GRG1FM03.0\u003c\/li\u003e\n    \u003cli\u003eSeries: GREYHOUND\u003c\/li\u003e\n    \u003cli\u003eLength: 3 m\u003c\/li\u003e\n    \u003cli\u003eCable color: black\u003c\/li\u003e\n    \u003cli\u003eCable type: 2x 0.22 mm² (AWG 24), ETP oxygen-free copper 99.95%\u003c\/li\u003e\n    \u003cli\u003eOuter diameter: 6 mm\u003c\/li\u003e\n    \u003cli\u003eShielding: copper spiral shield\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: rugged PVC\u003c\/li\u003e\n    \u003cli\u003eConnector 1: XLR 3p female (F), nickel-plated metal shell, manufacturer KLOTZ\u003c\/li\u003e\n    \u003cli\u003eConnector 2: XLR 3p male (M), nickel-plated metal shell, manufacturer KLOTZ\u003c\/li\u003e\n    \u003cli\u003eContacts: nickel-plated\u003c\/li\u003e\n    \u003cli\u003eShell\/sleeve: black\u003c\/li\u003e\n    \u003cli\u003ePackaging: cable carrier\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53928328757585,"sku":"60199","price":17.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZGRG1FM03.01_58120cdd-30ed-4bbe-b40b-cf4347274799.jpg?v=1780504284"},{"product_id":"klotz-grg1fm05-0","title":"KLOTZ GRG1FM05.0","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz GRG1FM05.0\u003c\/strong\u003e is a 5-metre microphone cable from the GREYHOUND series, terminated with KLOTZ XLR 3-pin female and male connectors featuring nickel-plated metal shells and nickel-plated contacts. The 2x 0.22 mm² (AWG 24) ETP oxygen-free copper core with spiral shielding and a rugged 6 mm diameter PVC jacket succeeds the GRK1FM series, updated in 2018 with a new metal XLR connector developed exclusively for the GREYHOUND line. The series covers the full range of stage and rehearsal applications in lengths from 0.5 m to 10 m and is available exclusively in black.\u003c\/p\u003e\n\n  \u003ch3\u003e5 metres — microphone to stagebox at close-source configurations\u003c\/h3\u003e\n  \u003cp\u003eFive metres suits applications where the stagebox or console microphone input is positioned close to the performer — small stages, rehearsal rooms, home recording setups with a microphone near the interface, or compact PA systems with the mixer at the front. The 99.95% ETP oxygen-free copper core at 0.22 mm² delivers reliable microphone signal transmission without resistive losses that would be audible with standard dynamic or condenser microphones. Spiral shielding rejects electromagnetic interference from power supplies and stage lighting. The rugged 6 mm PVC jacket retains flexibility through repeated coiling and does not develop permanent kinks under intensive regular use.\u003c\/p\u003e\n\n  \u003ch3\u003eImproved XLR connector, same proven core spec — more mechanical quality at the same price point\u003c\/h3\u003e\n  \u003cp\u003eThe metal XLR shells of the GRG series were designed exclusively for the GREYHOUND line and differ from the previous GRK1FM version through a shortened bushing and improved grip ergonomics — relevant when connecting multiple cables quickly in poor backstage lighting or during a fast stage reconfiguration. The 2x 0.22 mm² conductor cross-section is identical to that used in KLOTZ microphone cables from higher-tier series, meaning GREYHOUND does not compromise on cable electrical performance — the cost efficiency comes from the simplified connector specification and production location, not from reduced conductor quality. Designed by KLOTZ AIS in Germany, produced in China by KLOTZ AIS.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e2x 0.22 mm² (AWG 24) ETP oxygen-free copper core — reliable microphone signal transmission\u003c\/li\u003e\n    \u003cli\u003eSpiral shielding — EMI rejection on stage and in rehearsal environments\u003c\/li\u003e\n    \u003cli\u003eRugged PVC outer jacket, 6 mm diameter — flexibility and durability under intensive use\u003c\/li\u003e\n    \u003cli\u003eKLOTZ metal XLR 3p connectors with nickel-plated shells — shortened bushing, improved grip\u003c\/li\u003e\n    \u003cli\u003eNickel-plated contacts — stable contact resistance across repeated connections\u003c\/li\u003e\n    \u003cli\u003eSuccessor to the GRK1FM series — improved connector mechanics, same core specification\u003c\/li\u003e\n    \u003cli\u003eDesign: Germany; production: KLOTZ AIS, China\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: GRG1FM05.0\u003c\/li\u003e\n    \u003cli\u003eSeries: GREYHOUND\u003c\/li\u003e\n    \u003cli\u003eLength: 5 m\u003c\/li\u003e\n    \u003cli\u003eCable color: black\u003c\/li\u003e\n    \u003cli\u003eCable type: 2x 0.22 mm² (AWG 24), ETP oxygen-free copper 99.95%\u003c\/li\u003e\n    \u003cli\u003eOuter diameter: 6 mm\u003c\/li\u003e\n    \u003cli\u003eShielding: copper spiral shield\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: rugged PVC\u003c\/li\u003e\n    \u003cli\u003eConnector 1: XLR 3p female (F), nickel-plated metal shell, manufacturer KLOTZ\u003c\/li\u003e\n    \u003cli\u003eConnector 2: XLR 3p male (M), nickel-plated metal shell, manufacturer KLOTZ\u003c\/li\u003e\n    \u003cli\u003eContacts: nickel-plated\u003c\/li\u003e\n    \u003cli\u003eShell\/sleeve: black\u003c\/li\u003e\n    \u003cli\u003ePackaging: cable carrier\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53928328921425,"sku":"60192","price":20.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZGRG1FM05.01_057fe887-4b08-437e-ad5b-31ae40210b4f.jpg?v=1780504270"},{"product_id":"klotz-grg1fm10-0","title":"KLOTZ GRG1FM10.0","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz GRG1FM10.0\u003c\/strong\u003e is a 10-metre microphone cable from the GREYHOUND series, terminated with KLOTZ XLR 3-pin female and male connectors featuring nickel-plated metal shells and nickel-plated contacts. The 2x 0.22 mm² (AWG 24) ETP oxygen-free copper core with spiral shielding and a rugged 6 mm diameter PVC jacket is the successor to the GRK1FM series. GREYHOUND is the entry point to the KLOTZ cable ecosystem — designed in Germany, produced by KLOTZ AIS in China — covering the full range of stage and rehearsal applications in lengths from 0.5 m to 10 m.\u003c\/p\u003e\n\n  \u003ch3\u003e10 metres of ETP copper and spiral shielding — a working cable for every stage situation\u003c\/h3\u003e\n  \u003cp\u003eThe 0.22 mm² cross-section and 99.95% ETP oxygen-free copper core deliver reliable microphone signal transmission without resistive losses that would be audible in standard dynamic or condenser microphone applications across 10 metres. Spiral shielding rejects electromagnetic interference from stage lighting power supplies and wireless systems operating in close proximity. The rugged yet flexible 6 mm PVC jacket handles the mechanical demands of daily coiling and uncoiling without permanent kinking — a relevant characteristic when the cable is in continuous use across rehearsals and touring productions. The nickel-plated KLOTZ XLR shells feature a shortened bushing profile with improved grip geometry, reducing the time needed for blind connection in dark backstage environments.\u003c\/p\u003e\n\n  \u003ch3\u003eSuccessor to the GRK1FM — improved connector, same proven core spec\u003c\/h3\u003e\n  \u003cp\u003eThe GREYHOUND GRG series replaced the earlier GRK1FM variant in 2018 with a new metal XLR connector developed exclusively for this line — shorter in profile, better to grip, and mechanically more durable than the previous plastic-bodied version. The 2x 0.22 mm² conductor cross-section matches the specification used across multiple higher-tier KLOTZ cable series, meaning no electrical compromise is made at the cable level. The cost efficiency of the GREYHOUND line comes from the simplified connector specification and production location, not from reduced conductor quality.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e2x 0.22 mm² (AWG 24) ETP oxygen-free copper core — reliable microphone signal transmission\u003c\/li\u003e\n    \u003cli\u003eSpiral shielding — EMI rejection on stage and in rehearsal environments\u003c\/li\u003e\n    \u003cli\u003eRugged PVC outer jacket, 6 mm diameter — durable under intensive daily use\u003c\/li\u003e\n    \u003cli\u003eKLOTZ metal XLR 3p connectors with nickel-plated shells — shortened bushing, improved grip\u003c\/li\u003e\n    \u003cli\u003eNickel-plated contacts — stable contact resistance across repeated connections\u003c\/li\u003e\n    \u003cli\u003eSuccessor to the GRK1FM series — improved connector mechanics, same core specification\u003c\/li\u003e\n    \u003cli\u003eDesign: Germany; production: KLOTZ AIS, China\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: GRG1FM10.0\u003c\/li\u003e\n    \u003cli\u003eEAN: 4250046865057\u003c\/li\u003e\n    \u003cli\u003eSeries: GREYHOUND\u003c\/li\u003e\n    \u003cli\u003eLength: 10 m\u003c\/li\u003e\n    \u003cli\u003eCable color: black\u003c\/li\u003e\n    \u003cli\u003eCable type: 2x 0.22 mm² (AWG 24), ETP oxygen-free copper 99.95%\u003c\/li\u003e\n    \u003cli\u003eOuter diameter: 6 mm\u003c\/li\u003e\n    \u003cli\u003eShielding: copper spiral shield\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: rugged PVC\u003c\/li\u003e\n    \u003cli\u003eConnector 1: XLR 3p female (F), nickel-plated metal shell, manufacturer KLOTZ\u003c\/li\u003e\n    \u003cli\u003eConnector 2: XLR 3p male (M), nickel-plated metal shell, manufacturer KLOTZ\u003c\/li\u003e\n    \u003cli\u003eContacts: nickel-plated\u003c\/li\u003e\n    \u003cli\u003eShell\/sleeve: black\u003c\/li\u003e\n    \u003cli\u003ePackaging: cable carrier\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53928329216337,"sku":"60200","price":27.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZGRG1FM10.01_88827f43-7feb-4c56-b474-bb265286b909.jpg?v=1780504260"},{"product_id":"klotz-kik4-5ppsw","title":"KLOTZ KIK4.5PPSW","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz KIK4.5PPSW\u003c\/strong\u003e is a 4.5-metre instrument cable from the KIK series, terminated with two straight 6.35 mm TS jack plugs in black shells with flexible studded rubber sleeves. The KIK cable core — 6.1 mm diameter, 99.95% ETP oxygen-free copper — uses double shielding combining conductive plastic and a copper spiral shield, holding capacitance to 115 pF\/m. The solid strain relief element withstands forces exceeding 200 N, protecting internal solder joints against the mechanical stress of accidental cable pulls during performance.\u003c\/p\u003e\n\n  \u003ch3\u003e4.5 metres and double shielding — reach and electrical performance in balance\u003c\/h3\u003e\n  \u003cp\u003eFour and a half metres suits guitarists and keyboard players performing with their own amplifier positioned directly on stage close to their playing position — enough reach for free movement without generating excess cable that needs to be coiled or secured to a pedalboard. At 115 pF\/m, total capacitance for this length sits at approximately 518 pF — lower than the 6 m version, which with high-impedance single-coil pickups can translate to a marginally brighter and more open top end. The dual-layer shielding — conductive plastic inside, copper spiral outside — provides effective isolation from the electromagnetic interference generated by effect power supplies, lighting dimmer systems, and wireless receivers common in live stage environments, all of which manifest as audible noise or hum with poorly shielded cables.\u003c\/p\u003e\n\n  \u003ch3\u003eFlexible sleeve and 200 N strain relief — mechanical reliability in working conditions\u003c\/h3\u003e\n  \u003cp\u003eThe flexible studded rubber sleeve at the cable-to-plug junction replaces the rigid heat-shrink used on lower-grade cables, allowing the cable to bend at a short radius without stressing the conductor at the solder point — relevant when plugging into jack sockets positioned at the bottom or side of guitars with unconventional body profiles. Strain relief rated above 200 N withstands the sharp pulls that cause immediate internal damage or intermittent connection failures in cables with weaker connector assemblies. The lead-free PVC jacket retains flexibility at low temperatures and does not stiffen with intensive touring use.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eDouble shielding: conductive plastic + copper spiral shield — effective EMI rejection\u003c\/li\u003e\n    \u003cli\u003e115 pF\/m capacitance — reliable performance across the 4.5 m length\u003c\/li\u003e\n    \u003cli\u003e99.95% ETP oxygen-free copper core — low resistance, high signal purity\u003c\/li\u003e\n    \u003cli\u003eStrain relief rated above 200 N — protects internal solder joints from mechanical stress\u003c\/li\u003e\n    \u003cli\u003eFlexible studded rubber sleeve — free bending at sockets of varying geometry\u003c\/li\u003e\n    \u003cli\u003eLead-free PVC outer jacket, 6.1 mm diameter — durable and flexible at low temperatures\u003c\/li\u003e\n    \u003cli\u003eStraight-to-straight configuration — two TS jack 6.35 mm plugs with black shells\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: KIK4.5PPSW\u003c\/li\u003e\n    \u003cli\u003eSeries: KIK\u003c\/li\u003e\n    \u003cli\u003eCategory: professional instrument\u003c\/li\u003e\n    \u003cli\u003eLength: 4.5 m\u003c\/li\u003e\n    \u003cli\u003eCable color: black\u003c\/li\u003e\n    \u003cli\u003eCable type: KIK, diameter 6.1 mm, ETP oxygen-free copper 99.95%\u003c\/li\u003e\n    \u003cli\u003eShielding: double — conductive plastic + copper spiral shield\u003c\/li\u003e\n    \u003cli\u003eCapacitance: 115 pF\/m (35 pF\/ft)\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: lead-free PVC\u003c\/li\u003e\n    \u003cli\u003eConnector 1: jack 2p TS 6.35 mm, straight, black shell\u003c\/li\u003e\n    \u003cli\u003eConnector 2: jack 2p TS 6.35 mm, straight, black shell\u003c\/li\u003e\n    \u003cli\u003eContacts: nickel-plated\u003c\/li\u003e\n    \u003cli\u003eSleeve: flexible studded rubber, short bending radius\u003c\/li\u003e\n    \u003cli\u003eStrain relief: above 200 N\u003c\/li\u003e\n    \u003cli\u003eJack manufacturer: KLOTZ\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53928329445713,"sku":"60204","price":22.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZKIK4.5PPSW_057e38b2-e0da-4761-8e4f-12861c47ef78.jpg?v=1780504244"},{"product_id":"klotz-kik6-0ppsw","title":"KLOTZ KIK6.0PPSW","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz KIK6.0PPSW\u003c\/strong\u003e is a 6-metre instrument cable from the KIK series, terminated with two straight 6.35 mm TS jack plugs in black shells with flexible studded rubber sleeves. The KIK cable core — 6.1 mm diameter, 99.95% ETP oxygen-free copper — uses double shielding combining conductive plastic and a copper spiral shield, holding capacitance to 115 pF\/m. The solid strain relief element withstands forces exceeding 200 N, effectively eliminating the risk of internal solder joint failure from accidental cable pulls during performance.\u003c\/p\u003e\n\n  \u003ch3\u003eDouble shielding and 115 pF\/m — stable signal at full stage length\u003c\/h3\u003e\n  \u003cp\u003eAt 6 metres and 115 pF\/m, total cable capacitance reaches 690 pF. For most humbucker-equipped guitars and active pickup systems this figure produces no audible tone change, making the KIK a reliable working cable without the tonal compromises that cheaper single-shielded cables introduce at this length. The combination of inner conductive plastic and outer copper spiral creates a dual-layer EMI barrier that rejects mains induction and nearby wireless system interference — sources that manifest as audible noise or hum through a guitar amplifier when poorly shielded cables are used on a busy stage. The lead-free PVC jacket and flexible rubber sleeve at the plug — rather than a rigid shrink sleeve — allow free bending at guitar output sockets and amplifier inputs of varying geometry and angle.\u003c\/p\u003e\n\n  \u003ch3\u003e200 N strain relief and 6 metres — built for everyday stage use\u003c\/h3\u003e\n  \u003cp\u003eSix metres provides full freedom of movement on stage with the amplifier positioned at the back, without stretching the cable when approaching the stage edge and without excess cable dragging across the floor. The strain relief rated above 200 N protects internal solder connections against the mechanical stress of accidental cable treading or sudden pulls — failure modes that cause intermittent or permanent signal loss in cables with weaker connector assemblies. The black finish and discreet visual profile keep the cable from being a distraction on stage; the KIK series is also available in five colours for easy identification in multi-instrument setups.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eDouble shielding: conductive plastic + copper spiral shield — effective EMI rejection\u003c\/li\u003e\n    \u003cli\u003e115 pF\/m capacitance — reliable performance at 6 m for humbuckers and active systems\u003c\/li\u003e\n    \u003cli\u003e99.95% ETP oxygen-free copper core — low resistance, high signal purity\u003c\/li\u003e\n    \u003cli\u003eStrain relief rated above 200 N — protects internal solder joints from mechanical stress\u003c\/li\u003e\n    \u003cli\u003eFlexible studded rubber sleeve — free bending at sockets of varying geometry\u003c\/li\u003e\n    \u003cli\u003eLead-free PVC outer jacket, 6.1 mm diameter — durable and flexible\u003c\/li\u003e\n    \u003cli\u003eStraight-to-straight configuration — two TS jack 6.35 mm plugs with black shells\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: KIK6.0PPSW\u003c\/li\u003e\n    \u003cli\u003eEAN: 4250046803882\u003c\/li\u003e\n    \u003cli\u003eSeries: KIK\u003c\/li\u003e\n    \u003cli\u003eCategory: professional instrument\u003c\/li\u003e\n    \u003cli\u003eLength: 6 m\u003c\/li\u003e\n    \u003cli\u003eCable color: black\u003c\/li\u003e\n    \u003cli\u003eCable type: KIK, diameter 6.1 mm, ETP oxygen-free copper 99.95%\u003c\/li\u003e\n    \u003cli\u003eShielding: double — conductive plastic + copper spiral shield\u003c\/li\u003e\n    \u003cli\u003eCapacitance: 115 pF\/m (35 pF\/ft)\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: lead-free PVC\u003c\/li\u003e\n    \u003cli\u003eConnector 1: jack 2p TS 6.35 mm, straight, black shell\u003c\/li\u003e\n    \u003cli\u003eConnector 2: jack 2p TS 6.35 mm, straight, black shell\u003c\/li\u003e\n    \u003cli\u003eContacts: nickel-plated\u003c\/li\u003e\n    \u003cli\u003eSleeve: flexible studded rubber, short bending radius\u003c\/li\u003e\n    \u003cli\u003eStrain relief: above 200 N\u003c\/li\u003e\n    \u003cli\u003eJack manufacturer: KLOTZ\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53928329609553,"sku":"60191","price":25.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZKIK6.0PPSW_6b1830ce-979f-4a92-ae77-48725c0cc6dc.jpg?v=1780504231"},{"product_id":"klotz-kpm0-30rr","title":"KLOTZ KPM0.30RR","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz KPM0.30RR\u003c\/strong\u003e is a 30-centimetre instrument patch cable from the PatchMaster Pro series, terminated at both ends with 6.35 mm TS jack plugs in a flat angle profile — a low-clearance 90-degree design that minimises the height of the connector above the pedalboard surface. Double shielding combining a conductive plastic layer with a copper spiral shield delivers effective EMI rejection while keeping capacitance low. Hard gold-plated contacts, a flexible PVC jacket, and kink protection with strain relief at both plugs prepare this cable for intensive use on touring pedalboards and permanent studio installations alike.\u003c\/p\u003e\n\n  \u003ch3\u003eFlat angle profile and 30 cm — maximum packing density on the pedalboard\u003c\/h3\u003e\n  \u003cp\u003eA standard 90-degree angled plug protrudes several centimetres above the pedalboard surface and creates clearance conflicts on densely populated boards. The flat angle profile used across the KPM series reduces the connector height to a minimum, routing the cable nearly parallel to the pedal surface — without obstructing access to adjacent effect switches or pulling the cable across the full width of the board. Thirty centimetres covers the typical centre-to-centre distance between effects on a medium-sized pedalboard without excess cable that needs to be coiled or secured with a strap.\u003c\/p\u003e\n\n  \u003ch3\u003eDouble shielding and hardened gold contacts — sustained electrical and mechanical integrity\u003c\/h3\u003e\n  \u003cp\u003eThe conductive plastic inner layer combined with the outer copper spiral creates a dual-barrier shielding system that rejects interference induced by power supplies and neighbouring effects operating at close range — the standard electromagnetic environment on a fully loaded pedalboard with multiple switch-mode power supplies. Hardened gold contacts resist abrasion more effectively than soft-gold plating, which matters when the cable is repeatedly connected to and disconnected from effect inputs of varying socket geometries during setup and changeover. Kink protection and strain relief at the cable-to-plug junction protect the most mechanically stressed point in the assembly against conductor fatigue from repeated movement in transit.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eDouble shielding: conductive plastic + copper spiral shield — effective EMI rejection\u003c\/li\u003e\n    \u003cli\u003e6.35 mm TS jack plugs in flat angle profile — minimal clearance above pedalboard surface\u003c\/li\u003e\n    \u003cli\u003eHardened gold contacts — higher abrasion resistance than standard soft-gold plating\u003c\/li\u003e\n    \u003cli\u003eFlexible PVC outer jacket — easy routing in cramped cable channels\u003c\/li\u003e\n    \u003cli\u003eKink protection and strain relief — mechanical protection at cable\/plug junction\u003c\/li\u003e\n    \u003cli\u003e30 cm length — standard inter-pedal distance on medium pedalboards\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: KPM0.30RR\u003c\/li\u003e\n    \u003cli\u003eSeries: PatchMaster Pro\u003c\/li\u003e\n    \u003cli\u003eLength: 30 cm (0.3 m)\u003c\/li\u003e\n    \u003cli\u003eCable color: black\u003c\/li\u003e\n    \u003cli\u003eShielding: double — conductive plastic + copper spiral shield\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: flexible PVC\u003c\/li\u003e\n    \u003cli\u003eConnector 1: jack 2p TS 6.35 mm, flat angle\u003c\/li\u003e\n    \u003cli\u003eConnector 2: jack 2p TS 6.35 mm, flat angle\u003c\/li\u003e\n    \u003cli\u003eContacts: hardened gold-plated\u003c\/li\u003e\n    \u003cli\u003eProtection: kink protection + strain relief on both plugs\u003c\/li\u003e\n    \u003cli\u003eApplications: pedalboard, studio, stage\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53928329675089,"sku":"60201","price":13.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZKPM0.30RR_913b5523-712e-4270-9f27-eb1b42ee6c5f.jpg?v=1780504208"},{"product_id":"klotz-ky5-090","title":"KLOTZ KY5-090","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz KY5-090\u003c\/strong\u003e is a 90-centimetre Y cable from the MiniLink Pro series, terminated with a 3.5 mm TRS mini jack on the source end and two 6.35 mm TS jack plugs on the output end. Built on PCD202 cable — 4.3 mm diameter, 0.22 mm² conductor cross-section, flexible PVC jacket — it splits a stereo signal from a smartphone, tablet, laptop, or audio interface into two independent mono signals for console, audio interface, or amplifier inputs. Every KY5 cable is hand-soldered and passes a 6-stage quality inspection in accordance with ISO 9001:2015.\u003c\/p\u003e\n\n  \u003ch3\u003e90 cm balanced split — minimal cable run, maximum routing clarity\u003c\/h3\u003e\n  \u003cp\u003eNinety centimetres covers the distance between a mobile device or laptop sitting directly next to a console or interface — on a FOH desk surface, on a keyboard stand, or in a desktop recording setup — without generating unnecessary cable slack that clutters the workspace. The balanced PCD202 construction gives the KY5-090 better EMI rejection than the unbalanced Y cables that dominate this format, which matters in environments where power supplies, chargers, and switching regulators sit in close proximity to the signal path on stage or in the studio. The short length also reduces the total capacitive load on the source output, keeping the signal path as clean as possible.\u003c\/p\u003e\n\n  \u003ch3\u003eExtended mini jack shaft and colour coding — reliable connections under working conditions\u003c\/h3\u003e\n  \u003cp\u003eThe moulded splice element at the cable split point reinforces the mechanically critical junction that takes the most stress from repeated connections and coiling — the point where unbranded Y cables typically fail first. The extended mini jack shaft seats fully in smartphones and tablets enclosed in thick protective cases without requiring the case to be removed, relevant whenever quick connection is needed mid-performance or during a fast soundcheck. Gold-plated contacts on solid brass 6.35 mm connector bodies with colour-coded shells — black for left, red for right — prevent channel swap errors when patching into console inputs in dim backstage or studio conditions.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003ePCD202 cable, 0.22 mm² conductor cross-section — balanced patch cable construction\u003c\/li\u003e\n    \u003cli\u003e3.5 mm TRS (stereo) to 2x 6.35 mm TS (mono) — L\/R split from stereo source\u003c\/li\u003e\n    \u003cli\u003eMoulded splice element — mechanical reinforcement at the cable split point\u003c\/li\u003e\n    \u003cli\u003eExtended mini jack shaft — full insertion into devices in protective cases\u003c\/li\u003e\n    \u003cli\u003eGold-plated contacts on both ends — low contact resistance, corrosion-resistant\u003c\/li\u003e\n    \u003cli\u003eSolid brass connectors with colour-coded shells (black\/red) — channel identification\u003c\/li\u003e\n    \u003cli\u003eHand-soldered + 6-stage quality assurance per ISO 9001:2015\u003c\/li\u003e\n    \u003cli\u003eFlexible PVC outer jacket, 4.3 mm diameter — lightweight and easy to route\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: KY5-090\u003c\/li\u003e\n    \u003cli\u003eEAN: 4250046877746\u003c\/li\u003e\n    \u003cli\u003eSeries: MiniLink Pro\u003c\/li\u003e\n    \u003cli\u003eLength: 0.9 m\u003c\/li\u003e\n    \u003cli\u003eCable color: black\u003c\/li\u003e\n    \u003cli\u003eCable type: PCD202, diameter 4.3 mm, cross-section 0.22 mm²\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: PVC\u003c\/li\u003e\n    \u003cli\u003eConnector 1: mini jack 3p TRS 3.5 mm — stereo input end\u003c\/li\u003e\n    \u003cli\u003eConnector 2a: jack 2p TS 6.35 mm, straight, black shell (L)\u003c\/li\u003e\n    \u003cli\u003eConnector 2b: jack 2p TS 6.35 mm, straight, red shell (R)\u003c\/li\u003e\n    \u003cli\u003eContacts: gold-plated\u003c\/li\u003e\n    \u003cli\u003eConnector bodies: solid brass, colour-coded\u003c\/li\u003e\n    \u003cli\u003eSplice element: moulded\u003c\/li\u003e\n    \u003cli\u003eProduction: hand-soldered, ISO 9001:2015 quality assurance (6 stages)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53928330068305,"sku":"60195","price":23.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZKY5-0901_3dc252e0-5797-4ef8-aeeb-1c9aa8432fd3.jpg?v=1780504196"},{"product_id":"klotz-ky5-150","title":"KLOTZ KY5-150","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz KY5-150\u003c\/strong\u003e is a 1.5-metre Y cable from the MiniLink Pro series, terminated with a 3.5 mm TRS mini jack on the source end and two 6.35 mm TS jack plugs on the output end. Built on PCD202 cable — 4.3 mm diameter, 0.22 mm² conductor cross-section, flexible PVC jacket — it functions as a balanced patch cable that splits a stereo signal from a smartphone, tablet, laptop, or audio interface into two independent mono signals for mixer or amplifier inputs. Every KY5 cable is hand-soldered and passes a 6-stage quality inspection in accordance with ISO 9001:2015.\u003c\/p\u003e\n\n  \u003ch3\u003eBalanced stereo-to-dual-mono split — mobile devices into professional inputs\u003c\/h3\u003e\n  \u003cp\u003eConnecting mobile devices to a professional console or preamp requires splitting the stereo TRS output at 3.5 mm into two separate mono TS signals at 6.35 mm. The KY5-150 handles this as a balanced patch cable, giving it better noise rejection than the unbalanced Y cables typically found in this price bracket. The moulded splice element at the split point provides mechanical reinforcement at the cable's most stress-prone location — the junction that takes the most abuse from repeated connections and coiling over the course of a gig or rehearsal season.\u003c\/p\u003e\n\n  \u003ch3\u003eExtended mini jack shaft — full insertion regardless of protective case thickness\u003c\/h3\u003e\n  \u003cp\u003eStandard 3.5 mm mini jack plugs frequently fail to seat fully in smartphones and tablets enclosed in thick protective cases, requiring the case to be removed before connection. The KY5's extended shaft allows complete insertion into the device socket without removing the case — a practical advantage when working quickly on stage or in a broadcast environment. Gold-plated contacts on both ends minimise contact resistance and resist oxidation through regular daily connections. Colour-coded solid brass shells on the two 6.35 mm plugs — black for left, red for right — eliminate channel swap errors when patching into a console.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003ePCD202 cable, 0.22 mm² conductor cross-section — balanced patch cable construction\u003c\/li\u003e\n    \u003cli\u003e3.5 mm TRS (stereo) to 2x 6.35 mm TS (mono) — L\/R split from stereo source\u003c\/li\u003e\n    \u003cli\u003eMoulded splice element — mechanical reinforcement at the cable split point\u003c\/li\u003e\n    \u003cli\u003eExtended mini jack shaft — full insertion into devices in protective cases\u003c\/li\u003e\n    \u003cli\u003eGold-plated contacts on both ends — low contact resistance, corrosion-resistant\u003c\/li\u003e\n    \u003cli\u003eSolid brass connectors with colour-coded shells (black\/red) — channel identification\u003c\/li\u003e\n    \u003cli\u003eHand-soldered + 6-stage quality assurance per ISO 9001:2015\u003c\/li\u003e\n    \u003cli\u003eFlexible PVC outer jacket, 4.3 mm diameter — lightweight and easy to route\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: KY5-150\u003c\/li\u003e\n    \u003cli\u003eEAN: 4250046877753\u003c\/li\u003e\n    \u003cli\u003eSeries: MiniLink Pro\u003c\/li\u003e\n    \u003cli\u003eLength: 1.5 m\u003c\/li\u003e\n    \u003cli\u003eCable color: black\u003c\/li\u003e\n    \u003cli\u003eCable type: PCD202, diameter 4.3 mm, cross-section 0.22 mm²\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: PVC\u003c\/li\u003e\n    \u003cli\u003eConnector 1: mini jack 3p TRS 3.5 mm — stereo input end\u003c\/li\u003e\n    \u003cli\u003eConnector 2a: jack 2p TS 6.35 mm, straight, black shell (L)\u003c\/li\u003e\n    \u003cli\u003eConnector 2b: jack 2p TS 6.35 mm, straight, red shell (R)\u003c\/li\u003e\n    \u003cli\u003eContacts: gold-plated\u003c\/li\u003e\n    \u003cli\u003eConnector bodies: solid brass, colour-coded\u003c\/li\u003e\n    \u003cli\u003eSplice element: moulded\u003c\/li\u003e\n    \u003cli\u003eProduction: hand-soldered, ISO 9001:2015 quality assurance (6 stages)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53928330330449,"sku":"60207","price":23.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZKY5-150_85acae78-c4d7-47db-a4db-3426d3c6f60f.jpg?v=1780504187"},{"product_id":"klotz-lx2-3x1k2-03-0","title":"KLOTZ LX2-3X1K2-03.0","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz LX2-3X1K2-03.0\u003c\/strong\u003e is a 3-metre DMX cable from the LX2 series, built on OT2000 cable with 99.95% ETP oxygen-free copper conductors and a tinned copper spiral shield. The characteristic impedance of 110 Ω required by the DMX512 standard is maintained along the full cable length through tight pair twisting and dense spiral shielding — the two construction parameters that determine transmission reliability in lighting control chains running across long distances or through electromagnetically noisy stage environments. KLOTZ XLR 3-pin connectors with nickel-plated shells, silver-plated contacts, and a blue coding ring complete the assembly, enabling instant DMX cable identification among other XLR connections at stageboxes and lighting consoles.\u003c\/p\u003e\n\n  \u003ch3\u003e110 Ω and tight pair twist — DMX signal integrity without compromise\u003c\/h3\u003e\n  \u003cp\u003eDMX512 is sensitive to impedance mismatches and electromagnetic interference: transmission errors manifest as fixture flickering, random channel resets, or complete loss of lighting control over affected universes. The OT2000 cable maintains its 110 Ω impedance through a precisely controlled pair twist geometry stabilised by cotton filler threads within the pair windings, which preserve the stranding structure through repeated coiling and uncoiling on production rigs. The tinned copper spiral shield rejects induced EMI from power cables and wireless systems common in stage environments. The flexible PVC outer jacket at just 6.5 mm in diameter provides mechanical durability without restricting cable routing in tight truss sections or rigging positions.\u003c\/p\u003e\n\n  \u003ch3\u003eBlue coding ring and KLOTZ connectors — identification in low-light conditions\u003c\/h3\u003e\n  \u003cp\u003eOn complex productions, DMX, microphone, and signal cables regularly share the same XLR connector format at stageboxes and lighting desks. The blue coding ring on LX2 series connectors distinguishes DMX cables from the rest of the loom without reading labels in poor backstage lighting conditions, reducing patching errors during fast setups and changeovers. Nickel-plated XLR shells and silver-plated contacts from KLOTZ ensure mechanical robustness and stable low contact resistance through the daily mate-unmate cycles typical of rental inventory and touring production. Three metres covers the standard link distance between fixtures in a DMX daisy chain or between a console and the first splitter positioned close to FOH.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOT2000 ETP oxygen-free copper cable — precise 110 Ω characteristic impedance along full length\u003c\/li\u003e\n    \u003cli\u003eTinned copper spiral shielding — effective EMI rejection in high-interference stage environments\u003c\/li\u003e\n    \u003cli\u003eTight pair twist with cotton filler threads — stable geometry through repeated coiling\u003c\/li\u003e\n    \u003cli\u003eFlexible PVC outer jacket, 6.5 mm diameter — mechanical durability without stiffness\u003c\/li\u003e\n    \u003cli\u003eKLOTZ XLR 3p connectors with nickel-plated shells and silver-plated contacts\u003c\/li\u003e\n    \u003cli\u003eBlue coding ring — instant DMX cable identification in mixed XLR loom\u003c\/li\u003e\n    \u003cli\u003eMinimum bending radius 35 mm — safe routing in restricted rigging positions\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: LX2-3X1K2-03.0\u003c\/li\u003e\n    \u003cli\u003eEAN: 4250046891162\u003c\/li\u003e\n    \u003cli\u003eSeries: LX2\u003c\/li\u003e\n    \u003cli\u003eLength: 3 m\u003c\/li\u003e\n    \u003cli\u003eCable color: black\u003c\/li\u003e\n    \u003cli\u003eCable type: OT2000, cross-section 0.22 mm² (AWG 24), ETP oxygen-free copper 99.95%\u003c\/li\u003e\n    \u003cli\u003eCharacteristic impedance: 110 Ω\u003c\/li\u003e\n    \u003cli\u003eShielding: tinned copper spiral shield\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: PVC, diameter 6.5 mm\u003c\/li\u003e\n    \u003cli\u003eMinimum bending radius: 35 mm\u003c\/li\u003e\n    \u003cli\u003eConnector 1: XLR 3p female (F), nickel-plated shell, manufacturer KLOTZ\u003c\/li\u003e\n    \u003cli\u003eConnector 2: XLR 3p male (M), nickel-plated shell, manufacturer KLOTZ\u003c\/li\u003e\n    \u003cli\u003eContacts: silver-plated\u003c\/li\u003e\n    \u003cli\u003eCoding ring: blue\u003c\/li\u003e\n    \u003cli\u003ePackaging: cable carrier\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53928330363217,"sku":"60188","price":32.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZLX2-3X1K2-03.0_9a7d0253-fd01-4f97-8e5c-e48cf3dafc4b.jpg?v=1780504177"},{"product_id":"klotz-m1k1fm0500","title":"KLOTZ M1K1FM0500","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz M1K1FM0500\u003c\/strong\u003e is a 5-metre microphone cable from the M1 series, terminated with KLOTZ XLR 3-pin female and male connectors featuring nickel-plated metal shells and silver-plated contacts. The MY206 cable core — 0.22 mm² (AWG 24) ETP oxygen-free copper with copper spiral shielding and a lead-free PVC jacket — holds capacitance to 60 pF\/m. At 5 metres the total cable capacitance is 300 pF, a value that produces no audible bandwidth reduction with either dynamic or condenser microphone output impedances. The 5 m length suits close-source microphone setups, multi-mic recording sessions in medium-sized rooms, and broadcast applications where the preamp or stagebox is positioned near the source.\u003c\/p\u003e\n\n  \u003ch3\u003eMY206 fat-twist construction — geometry held under mechanical stress\u003c\/h3\u003e\n  \u003cp\u003eThe MY206 cable's fat twisted-core design maintains cross-section symmetry after compression and torsion — the everyday mechanical loads that stage and studio cables absorb during setup, use, and storage. This geometry prevents the permanent deformation that causes gradual capacitance drift and progressive electrical degradation in cables with thinner, less structured cores. The copper spiral shield rejects induced electromagnetic interference without stiffening the jacket, allowing the cable to lie flat naturally between patchbay inputs and microphone stands without restricting positioning. The lead-free PVC outer jacket meets current environmental compliance standards and resists abrasion when dragged across rough stage surfaces during repeated productions.\u003c\/p\u003e\n\n  \u003ch3\u003e5 metres — the right length for close microphone configurations\u003c\/h3\u003e\n  \u003cp\u003eFive metres eliminates excess cable on stage when the microphone is positioned close to the stagebox or rack-mounted preamp, while providing enough slack for position adjustments without straining the XLR connector. In the recording studio this length covers the distance from an instrument position to a wall-mounted patchbay in typical multi-microphone tracking setups. KLOTZ-manufactured XLR connectors with nickel-plated metal shells and silver-plated contacts maintain consistent low contact resistance through the full service life of the cable, including the daily mate-unmate cycles typical in rental inventory and touring production.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eMY206 ETP oxygen-free copper cable — high signal purity and mechanical durability\u003c\/li\u003e\n    \u003cli\u003eCopper spiral shielding — effective EMI rejection without stiffening the jacket\u003c\/li\u003e\n    \u003cli\u003e60 pF\/m capacitance — tonally neutral across the full 5 m length\u003c\/li\u003e\n    \u003cli\u003eFat twisted-core design — torsional resistance, symmetry retained after compression\u003c\/li\u003e\n    \u003cli\u003eLead-free PVC outer jacket — environmental compliance, abrasion-resistant\u003c\/li\u003e\n    \u003cli\u003eKLOTZ XLR 3p connectors with nickel-plated shells and silver-plated contacts\u003c\/li\u003e\n    \u003cli\u003eBlack plastic sleeve on both connectors — fast end identification on dark stages\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: M1K1FM0500\u003c\/li\u003e\n    \u003cli\u003eEAN: 4250046861752\u003c\/li\u003e\n    \u003cli\u003eSeries: M1\u003c\/li\u003e\n    \u003cli\u003eCategory: professional microphone\u003c\/li\u003e\n    \u003cli\u003eLength: 5 m\u003c\/li\u003e\n    \u003cli\u003eCable color: black\u003c\/li\u003e\n    \u003cli\u003eCable type: MY206, cross-section 0.22 mm² (AWG 24)\u003c\/li\u003e\n    \u003cli\u003eShielding: copper spiral shield\u003c\/li\u003e\n    \u003cli\u003eCapacitance: 60 pF\/m (18 pF\/ft)\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: lead-free PVC\u003c\/li\u003e\n    \u003cli\u003eConnector 1: XLR 3p female (F), nickel-plated metal shell, manufacturer KLOTZ\u003c\/li\u003e\n    \u003cli\u003eConnector 2: XLR 3p male (M), nickel-plated metal shell, manufacturer KLOTZ\u003c\/li\u003e\n    \u003cli\u003eContacts: silver-plated\u003c\/li\u003e\n    \u003cli\u003eShell\/sleeve: plastic, black\u003c\/li\u003e\n    \u003cli\u003ePackaging: cable carrier\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53928330559825,"sku":"60202","price":31.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZM1K1FM0500_7d4dd1bf-26e4-472e-9d94-d33eaafcccc1.jpg?v=1780504165"},{"product_id":"klotz-m1k1fm1000","title":"KLOTZ M1K1FM1000","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz M1K1FM1000\u003c\/strong\u003e is a 10-metre microphone cable from the M1 series, terminated with KLOTZ XLR 3-pin female and male connectors featuring nickel-plated metal shells and silver-plated contacts. The MY206 cable core — 0.22 mm² (AWG 24) ETP oxygen-free copper with copper spiral shielding and a lead-free PVC jacket — holds capacitance to 60 pF\/m. At 10 metres that totals 600 pF, a figure that sits comfortably within the range where neither dynamic nor condenser microphone output impedances will produce any audible bandwidth reduction in the signal path.\u003c\/p\u003e\n\n  \u003ch3\u003eMY206 fat-twist construction — mechanical and electrical integrity under load\u003c\/h3\u003e\n  \u003cp\u003eThe MY206 cable type used in the M1 series uses a fat twisted-core geometry that provides high torsional resistance and retains cross-section symmetry even after repeated compression — a common occurrence when cables are stepped on or run under equipment on stage. This construction prevents the permanent deformation that causes gradual capacitance increase and tonal degradation in cables with thinner, looser cores. The copper spiral shield delivers effective EMI rejection without adding rigidity to the jacket, so the cable lays flat naturally and coils without memory after a show. The lead-free PVC outer jacket meets current environmental standards and withstands abrasion when the cable is dragged across rough stage surfaces.\u003c\/p\u003e\n\n  \u003ch3\u003e10 metres and KLOTZ XLR connectors — stage to stagebox without compromise\u003c\/h3\u003e\n  \u003cp\u003eTen metres is the standard working distance between a vocalist's position and the first stagebox or splitter on a mid-size stage, and between a spot-mic and a rack-mounted preamp in a pulled-back recording configuration. KLOTZ-manufactured XLR connectors with nickel-plated metal shells and silver-plated contacts maintain consistent low contact resistance through the full service life of the cable, including repeated daily mate-unmate cycles in touring and rental contexts. The black plastic sleeve on both connectors allows quick end identification and precise insertion without needing to look closely in dark backstage environments.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eMY206 ETP oxygen-free copper cable — high signal purity and mechanical durability\u003c\/li\u003e\n    \u003cli\u003eCopper spiral shielding — effective EMI rejection without stiffening the jacket\u003c\/li\u003e\n    \u003cli\u003e60 pF\/m capacitance — tonally neutral across the full 10 m length\u003c\/li\u003e\n    \u003cli\u003eFat twisted-core design — torsional resistance, symmetry retained after compression\u003c\/li\u003e\n    \u003cli\u003eLead-free PVC outer jacket — environmental compliance, abrasion-resistant\u003c\/li\u003e\n    \u003cli\u003eKLOTZ XLR 3p connectors with nickel-plated shells and silver-plated contacts\u003c\/li\u003e\n    \u003cli\u003eBlack plastic sleeve on both connectors — fast end identification on dark stages\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: M1K1FM1000\u003c\/li\u003e\n    \u003cli\u003eEAN: 4250046861776\u003c\/li\u003e\n    \u003cli\u003eSeries: M1\u003c\/li\u003e\n    \u003cli\u003eCategory: professional microphone\u003c\/li\u003e\n    \u003cli\u003eLength: 10 m\u003c\/li\u003e\n    \u003cli\u003eCable color: black\u003c\/li\u003e\n    \u003cli\u003eCable type: MY206, cross-section 0.22 mm² (AWG 24)\u003c\/li\u003e\n    \u003cli\u003eShielding: copper spiral shield\u003c\/li\u003e\n    \u003cli\u003eCapacitance: 60 pF\/m (18 pF\/ft)\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: lead-free PVC\u003c\/li\u003e\n    \u003cli\u003eConnector 1: XLR 3p female (F), nickel-plated metal shell, manufacturer KLOTZ\u003c\/li\u003e\n    \u003cli\u003eConnector 2: XLR 3p male (M), nickel-plated metal shell, manufacturer KLOTZ\u003c\/li\u003e\n    \u003cli\u003eContacts: silver-plated\u003c\/li\u003e\n    \u003cli\u003eShell\/sleeve: plastic, black\u003c\/li\u003e\n    \u003cli\u003ePackaging: cable carrier\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53928330592593,"sku":"60189","price":40.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZM1K1FM1000_99e699f3-13aa-4651-aa53-456a814b1f75.jpg?v=1780504155"},{"product_id":"klotz-mid-030","title":"KLOTZ MID-030","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz MID-030\u003c\/strong\u003e is a 3-metre lightweight MIDI cable terminated with two DIN 5-pin 180-degree connectors in moulded plastic housings with gold-plated contacts. The 4-core shielded cable construction carries all 5 pins fully wired — pins 1 and 3 are connected, enabling DC power supply to devices that draw current through the MIDI connector, removing the need for a separate power cable in compatible hardware configurations.\u003c\/p\u003e\n\n  \u003ch3\u003eAll 5 pins wired — full protocol compatibility across hardware\u003c\/h3\u003e\n  \u003cp\u003eMIDI cables with incomplete pin wiring are a consistent source of compatibility failures with devices that use pins 1 and 3 for power or extended protocol functions. The MID-030 wires all five pins to specification, covering the full range of MIDI-equipped hardware: synthesizers, sound modules, controllers, effect processors, MIDI interfaces, and DAW control surfaces regardless of manufacturer. Gold-plated contacts on both connectors keep contact resistance low and resist oxidation through repeated daily connections on stage rigs and in the studio — a relevant consideration for any cable that gets plugged in and pulled out as part of a regular setup routine.\u003c\/p\u003e\n\n  \u003ch3\u003eFlexible PVC jacket and lightweight build — designed for mobility\u003c\/h3\u003e\n  \u003cp\u003eThe MID series prioritises handling characteristics alongside electrical spec. The cable stays pliable after repeated coiling and uncoiling, holds its shape without permanent kinking, and does not stiffen at low temperatures during outdoor or cold-environment use. The moulded plastic DIN housings provide a positive grip for connection and disconnection without requiring excessive force, protecting the connector body from cracking under regular mechanical stress. Three metres covers the standard distances between rack-mounted hardware, desktop production setups, or keyboard-to-expander connections without excess cable to manage.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eAll 5 DIN pins wired — full MIDI specification compliance across all compatible devices\u003c\/li\u003e\n    \u003cli\u003ePins 1 and 3 connected — enables DC power supply to devices via MIDI cable\u003c\/li\u003e\n    \u003cli\u003eGold-plated contacts on both connectors — low contact resistance, oxidation-resistant\u003c\/li\u003e\n    \u003cli\u003e4-core shielded cable construction — reliable digital data transmission\u003c\/li\u003e\n    \u003cli\u003eMoulded plastic DIN 5p 180-degree connectors — ergonomic grip, mechanical durability\u003c\/li\u003e\n    \u003cli\u003eFlexible PVC outer jacket — retains pliability after repeated coiling\u003c\/li\u003e\n    \u003cli\u003eLightweight series construction — optimised for portability and low weight\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: MID-030\u003c\/li\u003e\n    \u003cli\u003eEAN: 4250046822760\u003c\/li\u003e\n    \u003cli\u003eSeries: MID (lightweight MIDI cable)\u003c\/li\u003e\n    \u003cli\u003eLength: 3 m\u003c\/li\u003e\n    \u003cli\u003eCable color: black\u003c\/li\u003e\n    \u003cli\u003eCable type: digital MIDI cable, 4-core with shield\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: PVC\u003c\/li\u003e\n    \u003cli\u003eConnector 1: DIN 5p 180°, moulded plastic housing\u003c\/li\u003e\n    \u003cli\u003eConnector 2: DIN 5p 180°, moulded plastic housing\u003c\/li\u003e\n    \u003cli\u003eContacts: gold-plated\u003c\/li\u003e\n    \u003cli\u003ePin wiring: all 5 pins — pins 1 and 3 connected (DC power supply)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53928330920273,"sku":"60187","price":12.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZMID-030_c856a8d0-db34-44f5-9b18-418187e8a74a.jpg?v=1780504141"},{"product_id":"klotz-prok030pp","title":"KLOTZ PROK030PP","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz PROK030PP\u003c\/strong\u003e is a 3-metre instrument cable from the PRO ARTIST series, terminated with two straight 6.35 mm jack plugs. The 6.5 mm diameter cable core uses double screening — bare copper spiral shield plus conductive plastic layer — holding capacitance to 95 pF\/m. The straight-to-straight configuration at 3 metres suits precision routing scenarios: effect pedal inputs on a densely packed board, amplifier send\/return loops, keyboard outputs to a mixer or audio interface, or any short run where a flat, controlled cable exit on both ends is the priority.\u003c\/p\u003e\n\n  \u003ch3\u003e3 metres, 95 pF\/m — minimum load on the signal path\u003c\/h3\u003e\n  \u003cp\u003eTotal cable capacitance at this length sits at approximately 285 pF. With typical passive pickup output impedances, the resulting low-pass corner frequency falls well outside the audible range — no rolloff of upper harmonics, no softened transient response, even with high-impedance single-coil pickups that react most strongly to capacitive loading. The dual-layer screen blocks mains-induced interference and stage RF without adding capacitance in the process. The PVC jacket is compounded with specialist plasticizers that keep the cable supple and electrically stable regardless of storage temperature or how frequently the cable is coiled and uncoiled between rehearsals and performances.\u003c\/p\u003e\n\n  \u003ch3\u003eStraight-to-straight — clean routing on boards and in rack systems\u003c\/h3\u003e\n  \u003cp\u003eTwo straight plugs allow the cable to run flat along the pedalboard surface, avoiding the protrusion that angled connectors create when space between pedals is tight. On rack units, the straight exit keeps the cable parallel to the front panel, making loom management straightforward. Metal nickel shells on both connectors include a heat-shrink anti-kink sleeve at the cable exit — protecting the conductor from fatigue fractures at the highest-stress point in any cable assembly. Gold-plated contacts on both ends maintain stable, low contact resistance across the full service life of the cable through repeated daily connections.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eDouble screening: copper spiral shield + conductive plastic — RFI rejection without capacitance penalty\u003c\/li\u003e\n    \u003cli\u003e95 pF\/m capacitance — tonally transparent at 3 m with passive pickups\u003c\/li\u003e\n    \u003cli\u003eStraight-to-straight configuration — optimised for pedalboards, rack units, and keyboard rigs\u003c\/li\u003e\n    \u003cli\u003eGold-plated contacts on both connectors — oxidation-resistant, stable contact resistance\u003c\/li\u003e\n    \u003cli\u003eMetal nickel shell with heat-shrink anti-kink sleeve at cable\/connector junction\u003c\/li\u003e\n    \u003cli\u003eSoft PVC jacket with advanced plasticizers — flexibility maintained at low temperatures\u003c\/li\u003e\n    \u003cli\u003eNegligible microphonics — no handling noise transferred into the signal path\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: PROK030PP\u003c\/li\u003e\n    \u003cli\u003eEAN: 4250046895115\u003c\/li\u003e\n    \u003cli\u003eSeries: PRO ARTIST\u003c\/li\u003e\n    \u003cli\u003eCategory: professional guitar\u003c\/li\u003e\n    \u003cli\u003eLength: 3 m\u003c\/li\u003e\n    \u003cli\u003eCable color: black\u003c\/li\u003e\n    \u003cli\u003eCable type: PRO ARTIST, diameter 6.5 mm\u003c\/li\u003e\n    \u003cli\u003eShielding: double — bare copper spiral + conductive plastic\u003c\/li\u003e\n    \u003cli\u003eCapacitance: 95 pF\/m\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: PVC with advanced plasticizers\u003c\/li\u003e\n    \u003cli\u003eConnector 1: jack 2p 6.35 mm, straight, manufacturer KLOTZ\u003c\/li\u003e\n    \u003cli\u003eConnector 2: jack 2p 6.35 mm, straight, manufacturer KLOTZ\u003c\/li\u003e\n    \u003cli\u003eContacts: gold-plated\u003c\/li\u003e\n    \u003cli\u003eShell\/sleeve: metal, nickel, with additional rugged heat-shrink anti-kink protection\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53928331280721,"sku":"60203","price":35.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZPROK030PP_2d4ab475-7181-42ab-a50a-3b1d2eadf653.jpg?v=1780504132"},{"product_id":"klotz-prok030pr","title":"KLOTZ PROK030PR","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz PROK030PR\u003c\/strong\u003e is a 3-metre instrument cable from the PRO ARTIST series, terminated with a straight jack on the amplifier end and a 90-degree angled jack on the instrument end. The 6.5 mm diameter cable core uses double screening — bare copper spiral shield plus conductive plastic layer — holding capacitance to 95 pF\/m. At 3 metres, this cable covers the close-range setups: guitar to combo amp positioned nearby, first pedal on a board, or the final link between the last effect and the amp input where a short, controlled run is preferable to excess cable on the floor.\u003c\/p\u003e\n\n  \u003ch3\u003eShort run, full spec — no filtering, no tonal compromise\u003c\/h3\u003e\n  \u003cp\u003eThree metres at 95 pF\/m puts total cable capacitance at roughly 285 pF. With typical passive pickup output impedances, that keeps the cable's low-pass corner frequency well above the audible range — meaning no high-frequency rolloff, no softened pick attack, even with high-impedance single-coil pickups that are particularly sensitive to capacitive loading. The dual-layer screen rejects induced interference from mains wiring and RF sources common on busy stages without adding capacitance in the process. The PVC jacket stays flexible throughout the cable's working life thanks to specialist plasticizers that prevent stiffening in cold environments.\u003c\/p\u003e\n\n  \u003ch3\u003eAngled connector — reduced mechanical stress at the output jack\u003c\/h3\u003e\n  \u003cp\u003eThe 90-degree plug on the instrument end directs cable strain away from the guitar's output socket, reducing the bending moment that a straight plug exerts during active stage movement — particularly relevant on instruments with side-mounted or recessed output jacks. The heat-shrink anti-kink sleeve at the cable-to-connector junction on both ends protects the conductor from fatigue fractures at the point where repeated flexing causes most cable failures in regular use. Gold-plated contacts and metal nickel shells on both plugs maintain consistent low contact resistance across frequent connection cycles on tour and in the studio.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eDouble screening: copper spiral shield + conductive plastic — effective RFI rejection without capacitance penalty\u003c\/li\u003e\n    \u003cli\u003e95 pF\/m capacitance — tonally transparent at 3 m with passive pickups\u003c\/li\u003e\n    \u003cli\u003eStraight jack (amp end) + 90-degree angled jack (instrument end)\u003c\/li\u003e\n    \u003cli\u003eGold-plated contacts on both connectors — oxidation-resistant, stable contact resistance\u003c\/li\u003e\n    \u003cli\u003eMetal nickel shell with heat-shrink anti-kink sleeve at cable\/connector junction\u003c\/li\u003e\n    \u003cli\u003eSoft PVC jacket with advanced plasticizers — flexibility maintained at low temperatures\u003c\/li\u003e\n    \u003cli\u003eNegligible microphonics — no handling noise transferred into the signal path\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: PROK030PR\u003c\/li\u003e\n    \u003cli\u003eEAN: 4250046895122\u003c\/li\u003e\n    \u003cli\u003eSeries: PRO ARTIST\u003c\/li\u003e\n    \u003cli\u003eCategory: professional guitar\u003c\/li\u003e\n    \u003cli\u003eLength: 3 m\u003c\/li\u003e\n    \u003cli\u003eCable color: black\u003c\/li\u003e\n    \u003cli\u003eCable type: PRO ARTIST, diameter 6.5 mm\u003c\/li\u003e\n    \u003cli\u003eShielding: double — bare copper spiral + conductive plastic\u003c\/li\u003e\n    \u003cli\u003eCapacitance: 95 pF\/m\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: PVC with advanced plasticizers\u003c\/li\u003e\n    \u003cli\u003eConnector 1: jack 2p 6.35 mm, straight, manufacturer KLOTZ\u003c\/li\u003e\n    \u003cli\u003eConnector 2: jack 2p 6.35 mm, angled 90°, manufacturer KLOTZ\u003c\/li\u003e\n    \u003cli\u003eContacts: gold-plated\u003c\/li\u003e\n    \u003cli\u003eShell\/sleeve: metal, nickel, with additional rugged heat-shrink anti-kink protection\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53928331444561,"sku":"60184","price":37.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZPROK030PR_a0982478-9b39-48ae-9d3d-8108cdb06fd2.jpg?v=1780504117"},{"product_id":"klotz-prok060pp","title":"KLOTZ PROK060PP","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz PROK060PP\u003c\/strong\u003e is a 6-metre instrument cable from the PRO ARTIST series, fitted with two straight 6.35 mm jack plugs. The 6.5 mm diameter cable core uses double screening — bare copper spiral shield plus a conductive plastic layer — keeping capacitance at 95 pF\/m. The straight-to-straight configuration suits setups where a 90-degree plug would obstruct adjacent connections: tightly packed pedalboards with vertical sockets, rack-mount preamp inputs, DI-box outputs, or keyboard-to-mixer runs where a flat cable exit is preferable.\u003c\/p\u003e\n\n  \u003ch3\u003e95 pF\/m and double shielding — full bandwidth at working length\u003c\/h3\u003e\n  \u003cp\u003eCable capacitance across a passive pickup forms a low-pass filter: every extra picofarad per metre shifts the resonant peak downward and softens the high-frequency transient response. At 95 pF\/m, the PRO ARTIST sits well below the 120–150 pF\/m range common in budget cables, where the difference is audible on single-coil guitars and instruments with high-impedance pickups. The double-layer screen — copper spiral and conductive plastic in combination — rejects power-supply interference and RF from wireless systems without the capacitance trade-off that heavier single-braid cables carry. The PVC jacket is formulated with specialist plasticizers that preserve flexibility and electrical stability across the cable's full working life, including cold outdoor stages and unheated storage.\u003c\/p\u003e\n\n  \u003ch3\u003eStraight-to-straight — the right geometry for boards and racks\u003c\/h3\u003e\n  \u003cp\u003eTwo straight plugs allow flush routing in rack units and keep the cable parallel to the panel surface on a pedalboard, avoiding the protrusion that an angled plug would create in tight horizontal configurations. The metal nickel shells on both connectors include a heat-shrink anti-kink sleeve at the cable exit point — protecting the conductor from fatigue fractures at the highest-stress location in any cable assembly. Gold-plated contacts resist oxidation from humidity and perspiration, maintaining consistent contact resistance through repeated mate-unmate cycles on tour and in the studio.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eDouble screening: copper spiral shield + conductive plastic — RFI rejection without capacitance penalty\u003c\/li\u003e\n    \u003cli\u003e95 pF\/m capacitance — wide bandwidth preserved at 6 m with passive pickups\u003c\/li\u003e\n    \u003cli\u003eStraight-to-straight configuration — optimised for pedalboards, rack units, and keyboard rigs\u003c\/li\u003e\n    \u003cli\u003eGold-plated contacts on both connectors — oxidation and corrosion resistant\u003c\/li\u003e\n    \u003cli\u003eMetal nickel shell with heat-shrink anti-kink sleeve at cable\/connector junction\u003c\/li\u003e\n    \u003cli\u003eSoft PVC jacket with advanced plasticizers — flexibility maintained at low temperatures\u003c\/li\u003e\n    \u003cli\u003eNegligible microphonics — no handling noise transferred into the signal path\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: PROK060PP\u003c\/li\u003e\n    \u003cli\u003eEAN: 4250046895153\u003c\/li\u003e\n    \u003cli\u003eSeries: PRO ARTIST\u003c\/li\u003e\n    \u003cli\u003eCategory: professional guitar\u003c\/li\u003e\n    \u003cli\u003eLength: 6 m\u003c\/li\u003e\n    \u003cli\u003eCable color: black\u003c\/li\u003e\n    \u003cli\u003eCable type: PRO ARTIST, diameter 6.5 mm\u003c\/li\u003e\n    \u003cli\u003eShielding: double — bare copper spiral + conductive plastic\u003c\/li\u003e\n    \u003cli\u003eCapacitance: 95 pF\/m\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: PVC with advanced plasticizers\u003c\/li\u003e\n    \u003cli\u003eConnector 1: jack 2p 6.35 mm, straight, manufacturer KLOTZ\u003c\/li\u003e\n    \u003cli\u003eConnector 2: jack 2p 6.35 mm, straight, manufacturer KLOTZ\u003c\/li\u003e\n    \u003cli\u003eContacts: gold-plated\u003c\/li\u003e\n    \u003cli\u003eShell\/sleeve: metal, nickel, with additional rugged heat-shrink anti-kink protection\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53928331575633,"sku":"60198","price":42.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZPROK060PP_a9098c6e-78a3-416a-a54d-03b764111373.jpg?v=1780504106"},{"product_id":"klotz-prok060pr","title":"KLOTZ PROK060PR","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz PROK060PR\u003c\/strong\u003e is a 6-metre instrument cable from the PRO ARTIST series, terminated with a straight jack on the amplifier end and a 90-degree angled jack on the instrument end. The PRO ARTIST cable core measures 6.5 mm in diameter and uses double screening — bare copper spiral shield combined with a conductive plastic layer — holding capacitance to 95 pF\/m. At 6 metres, that figure means the cable's high-frequency load on a passive guitar pickup stays low enough not to audibly blunt the top end or compress the attack.\u003c\/p\u003e\n\n  \u003ch3\u003eDouble shielding and low capacitance — tone preserved at full stage length\u003c\/h3\u003e\n  \u003cp\u003eCable capacitance is the primary tone-shaping variable in a passive guitar signal chain, acting as a low-pass filter whose cutoff frequency drops as length increases. The PRO ARTIST's dual-layer screen — copper spiral plus conductive plastic — handles EMI rejection without the capacitance penalty that single-layer heavy-copper braids often bring. The PVC jacket is compounded with specialist plasticizers to maintain both flexibility and electrical stability across the full service life of the cable, staying pliable at low temperatures on outdoor stages and in cold storage between tours.\u003c\/p\u003e\n\n  \u003ch3\u003eAngled connector — mechanical protection where cables fail most\u003c\/h3\u003e\n  \u003cp\u003eThe 90-degree jack on the instrument end reduces leverage stress at the guitar's output socket, a common failure point when a cable is pulled sideways during a performance. The metal nickel shells on both connectors incorporate a heat-shrink sleeve at the cable-to-connector junction — an additional anti-kink measure that protects the conductor from fatigue fractures caused by repeated bending in the same spot. Gold-plated contacts on both plugs resist oxidation and hold low contact resistance regardless of how the cable is stored or how frequently it is plugged and unplugged.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eDouble screening: copper spiral shield + conductive plastic — effective EMI rejection with controlled capacitance\u003c\/li\u003e\n    \u003cli\u003e95 pF\/m capacitance — minimal tonal impact at 6 m with passive guitar pickups\u003c\/li\u003e\n    \u003cli\u003eStraight jack (amp end) + 90-degree angled jack (instrument end)\u003c\/li\u003e\n    \u003cli\u003eGold-plated contacts on both connectors — oxidation-resistant, stable contact resistance\u003c\/li\u003e\n    \u003cli\u003eMetal nickel shell with heat-shrink anti-kink sleeve at cable\/connector junction\u003c\/li\u003e\n    \u003cli\u003eSoft PVC jacket with advanced plasticizers — flexibility maintained at low temperatures\u003c\/li\u003e\n    \u003cli\u003eNegligible microphonics — no handling noise transferred to the signal\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: PROK060PR\u003c\/li\u003e\n    \u003cli\u003eEAN: 4250046895160\u003c\/li\u003e\n    \u003cli\u003eSeries: PRO ARTIST\u003c\/li\u003e\n    \u003cli\u003eCategory: professional guitar\u003c\/li\u003e\n    \u003cli\u003eLength: 6 m\u003c\/li\u003e\n    \u003cli\u003eCable color: black\u003c\/li\u003e\n    \u003cli\u003eCable type: PRO ARTIST, diameter 6.5 mm\u003c\/li\u003e\n    \u003cli\u003eShielding: double — bare copper spiral + conductive plastic\u003c\/li\u003e\n    \u003cli\u003eCapacitance: 95 pF\/m\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: PVC with advanced plasticizers\u003c\/li\u003e\n    \u003cli\u003eConnector 1: jack 2p 6.35 mm, straight, manufacturer KLOTZ\u003c\/li\u003e\n    \u003cli\u003eConnector 2: jack 2p 6.35 mm, angled 90°, manufacturer KLOTZ\u003c\/li\u003e\n    \u003cli\u003eContacts: gold-plated\u003c\/li\u003e\n    \u003cli\u003eShell\/sleeve: metal, nickel, with additional rugged heat-shrink anti-kink protection\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53928332591441,"sku":"60190","price":43.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZPROK060PR_88400499-64d4-4ddb-a7d6-63ed8101b8d5.jpg?v=1780504096"},{"product_id":"klotz-sc1pp03sw","title":"KLOTZ SC1PP03SW","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz SC1PP03SW\u003c\/strong\u003e is a 3-metre speaker cable from the SC1 series, terminated with 6.35 mm jack plugs on both ends and built on KLOTZ LY215S cable with a 99.95% ETP oxygen-free copper core. The 2x 1.5 mm² cross-section and extra-short twisting pitch address the two main electrical concerns of a speaker cable run: resistive loss and electromagnetic interference susceptibility — without overengineering a connection that sits between a power amp output and a passive cabinet.\u003c\/p\u003e\n\n  \u003ch3\u003eConductor geometry and power transfer\u003c\/h3\u003e\n  \u003cp\u003eAt low-impedance speaker-level signals, cable resistance directly affects damping factor and transient control. The LY215S conductor structure — 30 strands of 0.25 mm bare copper — keeps DC resistance low while the short twist pitch reduces the loop inductance that causes high-frequency rolloff on longer runs. The PVC jacket stays flexible down to low temperatures, which matters when running monitor cables across a cold outdoor stage. At 0.32 kg for 3 metres, the cable puts negligible mechanical stress on the jack socket of a stage monitor even when routed vertically.\u003c\/p\u003e\n\n  \u003ch3\u003eConnector identification and quick deployment\u003c\/h3\u003e\n  \u003cp\u003eThe blue anodized jack shells are the SC1 series visual signature — immediately distinguishable from instrument or microphone cables in a cluttered backline or darkened stage. One end comes with a transparent heat-shrink sleeve over a short section, left blank for handwritten or printed labeling without the need for colour-coded cable ties. Silver-plated contacts on both plugs maintain consistent contact resistance across repeated connection cycles, relevant in any rental or touring context where cables are plugged and unplugged daily.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e99.95% ETP oxygen-free copper core — low resistive loss in the speaker signal path\u003c\/li\u003e\n    \u003cli\u003eLY215S construction: 30x 0.25 mm stranded, 2x 1.5 mm² cross-section — high flexibility with good EMC performance\u003c\/li\u003e\n    \u003cli\u003eExtra-short twisting pitch — reduced loop inductance and EMI susceptibility\u003c\/li\u003e\n    \u003cli\u003e6.35 mm jack plug 2p with blue anodized shell — fast visual identification on stage\u003c\/li\u003e\n    \u003cli\u003eSilver-plated contacts on both connectors — stable low contact resistance over service life\u003c\/li\u003e\n    \u003cli\u003eTransparent heat-shrink sleeve on one end for custom labeling\u003c\/li\u003e\n    \u003cli\u003eMatte PVC outer jacket — durable, flexible, cold-temperature resistant\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: SC1PP03SW\u003c\/li\u003e\n    \u003cli\u003eEAN: 4250046814819\u003c\/li\u003e\n    \u003cli\u003eSeries: SC1\u003c\/li\u003e\n    \u003cli\u003eLength: 3 m\u003c\/li\u003e\n    \u003cli\u003eWeight: 0.32 kg\u003c\/li\u003e\n    \u003cli\u003eCable type: KLOTZ LY215S\u003c\/li\u003e\n    \u003cli\u003eConductor construction: 30x 0.25 mm, ETP bare copper 99.95%\u003c\/li\u003e\n    \u003cli\u003eCross-section: 2x 1.5 mm²\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: PVC, matte, black\u003c\/li\u003e\n    \u003cli\u003eConnector 1: jack plug 6.35 mm 2p, blue anodized shell\u003c\/li\u003e\n    \u003cli\u003eConnector 2: jack plug 6.35 mm 2p, blue anodized shell\u003c\/li\u003e\n    \u003cli\u003eContacts: silver-plated\u003c\/li\u003e\n    \u003cli\u003eLabeling: transparent heat-shrink sleeve (one end)\u003c\/li\u003e\n    \u003cli\u003ePackaging: cable carrier\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53928332853585,"sku":"60196","price":33.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KLOTZSC1PP03SW_fa509250-540d-4116-b88f-919cfd8bef94.jpg?v=1780504084"},{"product_id":"klotz-suc02-x3l-0030","title":"Klotz SUC02-X3L-0030","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eKlotz SUC02-X3L-0030\u003c\/strong\u003e is a 2-channel AES\/EBU loom, 3 m in length, built on KLOTZ DigiWIRE multicore cable with individually foil-shielded pairs (PiMF) and KLOTZ XLR 3-pin connectors fitted with silver-plated contacts. The 0.22 mm² (AWG 24) conductor cross-section and pair-in-metal-foil shielding architecture make it a single wiring solution for both AES\/EBU digital and balanced analog signal paths — reducing the need for separate cable inventories on complex rigs.\u003c\/p\u003e\n\n  \u003ch3\u003eClean digital signal path without compromise\u003c\/h3\u003e\n  \u003cp\u003eAES\/EBU transmission is sensitive to impedance discontinuities and EMI — especially when running alongside power cables or near wireless systems. The PiMF shielding on each pair keeps crosstalk between the two channels minimal and rejects external interference that single overall-shielded cables let through. The 3 m length covers the common rack-to-console or converter-to-patchbay distances without unnecessary cable slack cluttering the workspace. The same cable handles DMX lighting control where required, eliminating any format-compatibility guesswork on mixed production setups.\u003c\/p\u003e\n\n  \u003ch3\u003eConnector reliability and labeling under working conditions\u003c\/h3\u003e\n  \u003cp\u003eKLOTZ's in-house XLR connectors feature metal shells with black plastic sleeves and laser-engraved channel labeling that remains legible regardless of wear or low-light conditions at front-of-house or in a dimly lit rack room. Silver-plated contacts maintain consistent low contact resistance across repeated mate-unmate cycles — a practical advantage in touring or rental contexts where connectors are stressed daily. The PVC outer jacket is robust enough to withstand road use yet stays flexible, allowing neat coiling and routing in tight rack spaces without kinking at the fanout points.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eDigiWIRE multicore cable with PiMF shielding — effective pair-level EMI rejection\u003c\/li\u003e\n    \u003cli\u003eCompatible with AES\/EBU digital and balanced analog signals on the same loom\u003c\/li\u003e\n    \u003cli\u003eLaser-engraved channel labeling on XLR connectors — permanent, abrasion-resistant identification\u003c\/li\u003e\n    \u003cli\u003eSilver-plated contacts on both male and female XLR 3-pin connectors\u003c\/li\u003e\n    \u003cli\u003eMetal-shell XLR connectors with black plastic sleeves, manufactured by KLOTZ\u003c\/li\u003e\n    \u003cli\u003eFlexible black PVC outer jacket — road-durable, easy to coil\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOrder code: SUC02-X3L-0030\u003c\/li\u003e\n    \u003cli\u003eEAN: 4255646712985\u003c\/li\u003e\n    \u003cli\u003eNumber of channels: 2\u003c\/li\u003e\n    \u003cli\u003eLength: 3 m\u003c\/li\u003e\n    \u003cli\u003eCable type: DigiWIRE, PiMF shielding (Al foil per pair)\u003c\/li\u003e\n    \u003cli\u003eConductor cross-section: 0.22 mm² (AWG 24)\u003c\/li\u003e\n    \u003cli\u003eOuter jacket: PVC, black\u003c\/li\u003e\n    \u003cli\u003eConnector 1: 2x XLR 3-pin female (F), metal shell\u003c\/li\u003e\n    \u003cli\u003eConnector 2: 2x XLR 3-pin male (M), metal shell\u003c\/li\u003e\n    \u003cli\u003eContacts: silver-plated\u003c\/li\u003e\n    \u003cli\u003eXLR connector manufacturer: KLOTZ\u003c\/li\u003e\n    \u003cli\u003eFanout length: 300 mm\u003c\/li\u003e\n    \u003cli\u003eApplications: AES\/EBU, DMX, balanced analog\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":53937493606737,"sku":"60211","price":64.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KlotzSUC02-X3L-00301_7855ec5c-7486-41d1-8bb6-6a2a6eee35e7.jpg?v=1780504068"},{"product_id":"klotz-grg1fp00-6","title":"Klotz GRG1FP00.6","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eKlotz GRG1FP00.6\u003c\/strong\u003e is a balanced microphone\/line cable from the budget Greyhound series, just 0.6 meters long, running from a female XLR connector to a 6.3mm jack plug. A 2x 0.22 mm² conductor made from high-quality 99.95% pure copper delivers a dynamic sound and clean signal transmission, and an effective spiral shield protects against electromagnetic interference even over such a short run.\u003c\/p\u003e\n\n\u003ch3\u003eA Short Link for Gear Sitting Side by Side\u003c\/h3\u003e\n\u003cp\u003eThe 0.6-meter length works well for connecting units placed right next to each other in a rack or on a mixing desk, such as between a DI box and a mixer input, or between two modules in the same frame, where a longer cable would only add clutter and snagging risk. A short run also means minimal cable capacitance, cutting the risk of top-end roll-off over an already short signal path.\u003c\/p\u003e\n\n\u003ch3\u003eA Solid Metal Connector Instead of Plastic\u003c\/h3\u003e\n\u003cp\u003eMetal XLR and jack connectors designed specifically for the Greyhound series, with a shorter sleeve and reinforced grip, hold the connection more securely and resist disconnection better than the plastic connectors found on cheaper entry-level cables. Nickel-plated contacts add further protection against corrosion, which matters for a cable that gets plugged and unplugged repeatedly during rehearsals and shows.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCable length: 0.6 meters\u003c\/li\u003e\n\u003cli\u003eConnector A: 3-pin XLR, female\u003c\/li\u003e\n\u003cli\u003eConnector B: 6.3mm jack, straight\u003c\/li\u003e\n\u003cli\u003eConductor cross section: 2x 0.22 mm²\u003c\/li\u003e\n\u003cli\u003eOuter cable diameter: 6 mm\u003c\/li\u003e\n\u003cli\u003eMetal XLR and jack connectors designed for the Greyhound series\u003c\/li\u003e\n\u003cli\u003eNickel-plated connector contacts\u003c\/li\u003e\n\u003cli\u003eSpiral shielding against interference\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: balanced microphone\/line cable, XLR to jack\u003c\/li\u003e\n\u003cli\u003eLength: 0.6 m\u003c\/li\u003e\n\u003cli\u003eColor: black\u003c\/li\u003e\n\u003cli\u003eConnector A: 3-pin XLR, female, nickel-plated metal shell\u003c\/li\u003e\n\u003cli\u003eConnector B: 6.3mm jack, 3-pin, straight, black metal shell\u003c\/li\u003e\n\u003cli\u003eConductor: 99.95% pure copper\u003c\/li\u003e\n\u003cli\u003eConductor cross section: 2x 0.22 mm² (AWG 24)\u003c\/li\u003e\n\u003cli\u003eShielding: spiral shield\u003c\/li\u003e\n\u003cli\u003eInsulation: PVC\u003c\/li\u003e\n\u003cli\u003eContacts: nickel-plated\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: China (Greyhound line)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":54186284581201,"sku":"60543","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KlotzGRG1FP00.6.jpg?v=1782919483"},{"product_id":"klotz-grg1fp03-0","title":"Klotz GRG1FP03.0","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eKlotz GRG1FP03.0\u003c\/strong\u003e is a balanced microphone\/line cable from the budget Greyhound series, 3 meters long, running from a female XLR connector to a 6.3mm jack plug. A 2x 0.22 mm² conductor made from high-quality 99.95% pure copper delivers a dynamic sound and clean signal transmission, and an effective spiral shield protects against electromagnetic interference typical of stages packed with electronic gear.\u003c\/p\u003e\n\n\u003ch3\u003eA Configuration Ready to Feed a Mixer\u003c\/h3\u003e\n\u003cp\u003eThe female XLR connector on one end picks up a balanced signal from a device with a male XLR output, such as an active speaker or an interface, while the 6.3mm jack on the other end connects directly to a mixer's line or instrument input without an adapter. That layout is useful for hooking up keyboards, effects processors, or other unbalanced signal sources to a console with combo inputs.\u003c\/p\u003e\n\n\u003ch3\u003eA Solid Metal Connector Instead of Plastic\u003c\/h3\u003e\n\u003cp\u003eMetal XLR and jack connectors designed specifically for the Greyhound series, with a shorter sleeve and reinforced grip, hold the connection more securely and resist disconnection better than the plastic connectors found on cheaper entry-level cables. Nickel-plated contacts add further protection against corrosion, which matters for a cable that gets plugged and unplugged repeatedly on tour or during rehearsals.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCable length: 3 meters\u003c\/li\u003e\n\u003cli\u003eConnector A: 3-pin XLR, female\u003c\/li\u003e\n\u003cli\u003eConnector B: 6.3mm jack, straight\u003c\/li\u003e\n\u003cli\u003eConductor cross section: 2x 0.22 mm²\u003c\/li\u003e\n\u003cli\u003eOuter cable diameter: 6 mm\u003c\/li\u003e\n\u003cli\u003eMetal XLR and jack connectors designed for the Greyhound series\u003c\/li\u003e\n\u003cli\u003eNickel-plated connector contacts\u003c\/li\u003e\n\u003cli\u003eSpiral shielding against interference\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: balanced microphone\/line cable, XLR to jack\u003c\/li\u003e\n\u003cli\u003eLength: 3 m\u003c\/li\u003e\n\u003cli\u003eColor: black\u003c\/li\u003e\n\u003cli\u003eConnector A: 3-pin XLR, female, nickel-plated metal shell\u003c\/li\u003e\n\u003cli\u003eConnector B: 6.3mm jack, 3-pin, straight, black metal shell\u003c\/li\u003e\n\u003cli\u003eConductor: 99.95% pure copper\u003c\/li\u003e\n\u003cli\u003eConductor cross section: 2x 0.22 mm² (AWG 24)\u003c\/li\u003e\n\u003cli\u003eShielding: spiral shield\u003c\/li\u003e\n\u003cli\u003eInsulation: PVC\u003c\/li\u003e\n\u003cli\u003eContacts: nickel-plated\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: China (Greyhound line)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":54186284613969,"sku":"60544","price":22.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KlotzGRG1FP03.01.jpg?v=1782919474"},{"product_id":"klotz-grg1mp00-6","title":"Klotz GRG1MP00.6","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eKlotz GRG1MP00.6\u003c\/strong\u003e is a balanced audio cable from the budget Greyhound series, just 0.6 meters long, running from a male XLR connector to a 6.3mm stereo jack plug. A 2x 0.22 mm² conductor made from high-quality 99.95% pure copper delivers a clean signal without high-frequency loss, and a rugged 6mm diameter PVC jacket protects the cores from mechanical damage despite heavy use over short distances.\u003c\/p\u003e\n\n\u003ch3\u003eA Short Cable for Point-to-Point Connections\u003c\/h3\u003e\n\u003cp\u003eThe 0.6-meter length works well for connecting units sitting right next to each other in a rack, such as between an effects processor output and a mixer input, between two modules in the same frame, or as a short patch lead in a home studio, where a longer cable would only add clutter and looping risk. A shorter run also means lower cable capacitance, which matters for high-impedance signals that are sensitive to top-end roll-off.\u003c\/p\u003e\n\n\u003ch3\u003eA Solid Metal Connector Instead of Plastic\u003c\/h3\u003e\n\u003cp\u003eThe metal XLR connector designed specifically for the Greyhound series, with a shorter sleeve and reinforced grip, holds the connection more securely and resists disconnection better than the plastic connectors found on cheaper entry-level cables. That construction brings a level of reliability closer to Klotz's higher-end lines, while keeping the price accessible for beginning musicians and anyone building their first rack cabling kit.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCable length: 0.6 meters\u003c\/li\u003e\n\u003cli\u003eConnector A: 3-pin XLR, male\u003c\/li\u003e\n\u003cli\u003eConnector B: 6.3mm stereo jack\u003c\/li\u003e\n\u003cli\u003eConductor cross section: 2x 0.22 mm²\u003c\/li\u003e\n\u003cli\u003eOuter cable diameter: 6 mm\u003c\/li\u003e\n\u003cli\u003eMetal XLR connector designed for the Greyhound series\u003c\/li\u003e\n\u003cli\u003eRugged PVC jacket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: balanced audio cable, XLR to stereo jack\u003c\/li\u003e\n\u003cli\u003eLength: 0.6 m\u003c\/li\u003e\n\u003cli\u003eColor: black\u003c\/li\u003e\n\u003cli\u003eConnector A: 3-pin XLR, male\u003c\/li\u003e\n\u003cli\u003eConnector B: 6.3mm jack, stereo\u003c\/li\u003e\n\u003cli\u003eConductor: 99.95% pure copper\u003c\/li\u003e\n\u003cli\u003eConductor cross section: 2x 0.22 mm²\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 6 mm\u003c\/li\u003e\n\u003cli\u003eInsulation: rugged PVC jacket\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: China (Greyhound line)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":54186284646737,"sku":"60542","price":15.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KlotzGRG1MP00.6.jpg?v=1782919463"},{"product_id":"klotz-grg1mp03-0","title":"Klotz GRG1MP03.0","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eKlotz GRG1MP03.0\u003c\/strong\u003e is a balanced audio cable from the budget Greyhound series, 3 meters long, running from a male XLR connector to a 6.3mm stereo jack plug. A 2x 0.22 mm² conductor made from high-quality 99.95% pure copper delivers a clean signal without high-frequency loss, and a rugged 6mm diameter PVC jacket protects the cores from mechanical damage through daily coiling and uncoiling on the road.\u003c\/p\u003e\n\n\u003ch3\u003eA Solid Metal Connector Instead of Plastic\u003c\/h3\u003e\n\u003cp\u003eThe metal XLR connector designed specifically for the Greyhound series, with a shorter sleeve and reinforced grip, holds the connection more securely and resists disconnection better than the plastic connectors found on cheaper entry-level cables. That construction brings a level of reliability closer to Klotz's higher-end lines, while keeping the price accessible for beginning musicians and anyone building their first cable kit.\u003c\/p\u003e\n\n\u003ch3\u003eA Bridge Between Balanced and Unbalanced Gear\u003c\/h3\u003e\n\u003cp\u003eThe XLR-to-stereo-jack configuration lets a balanced mixer or audio interface output connect to an unbalanced stereo input on a keyboard, media player, or studio monitor without needing an extra adapter. That's useful when hooking up home studio gear or a simple monitoring setup to a professional signal source with an XLR output.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCable length: 3 meters\u003c\/li\u003e\n\u003cli\u003eConnector A: 3-pin XLR, male\u003c\/li\u003e\n\u003cli\u003eConnector B: 6.3mm stereo jack\u003c\/li\u003e\n\u003cli\u003eConductor cross section: 2x 0.22 mm²\u003c\/li\u003e\n\u003cli\u003eOuter cable diameter: 6 mm\u003c\/li\u003e\n\u003cli\u003eMetal XLR connector designed for the Greyhound series\u003c\/li\u003e\n\u003cli\u003eRugged PVC jacket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: balanced audio cable, XLR to stereo jack\u003c\/li\u003e\n\u003cli\u003eLength: 3 m\u003c\/li\u003e\n\u003cli\u003eColor: black\u003c\/li\u003e\n\u003cli\u003eConnector A: 3-pin XLR, male\u003c\/li\u003e\n\u003cli\u003eConnector B: 6.3mm jack, stereo\u003c\/li\u003e\n\u003cli\u003eConductor: 99.95% pure copper\u003c\/li\u003e\n\u003cli\u003eConductor cross section: 2x 0.22 mm²\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 6 mm\u003c\/li\u003e\n\u003cli\u003eInsulation: rugged PVC jacket\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: China (Greyhound line)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":54186284679505,"sku":"60545","price":22.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KlotzGRG1MP03.0.jpg?v=1782919452"},{"product_id":"klotz-kikkg3-0prsw","title":"Klotz KIKKG3.0PRSW","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eKlotz KIKKG3.0PRSW\u003c\/strong\u003e is a 3-meter jack-to-jack instrument cable from the KIK series, combining a budget price point with the build reliability Klotz is known for in its higher-end lines. A straight connector on one end and a 90-degree angled connector on the other make it easy to run into a guitar or bass and into an amp or audio interface input sitting low on the floor. The conductor is oxygen-free copper at 99.95% purity, insulated with lead-free PVC and wrapped in a conductive plastic shield plus a spiral copper braid, giving solid protection against electromagnetic interference on a stage full of gear.\u003c\/p\u003e\n\n\u003ch3\u003eA Connector Built for Daily Stage Wear\u003c\/h3\u003e\n\u003cp\u003eThe metal KCPM connector housing, finished in black powder coating, holds up far better against mechanical damage than the plastic connectors found on typical budget cables, and a high-quality strain relief protects the solder joint from breaking if the cable gets pulled unexpectedly. 24-carat gold-plated contacts keep electrical contact stable and resist corrosion, which matters for a cable that gets plugged and unplugged repeatedly on tour.\u003c\/p\u003e\n\n\u003ch3\u003eA Shorter Run for Pedalboards and Workstations\u003c\/h3\u003e\n\u003cp\u003eThe 3-meter length works well for shorter distances, such as between a guitar and the first pedal on a pedalboard, between an interface and a guitar amp in the studio, or as a backup cable in a service case, where a longer run would only add clutter and looping risk. The 90-degree connector on the instrument side reduces mechanical stress on the guitar or bass input jack when playing standing up, and a rubber cable boot at the connector entry further guards against kinking at the point of highest wear.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCable length: 3 meters\u003c\/li\u003e\n\u003cli\u003eStraight and 90-degree angled connectors, 6.35mm mono jack\u003c\/li\u003e\n\u003cli\u003e24-carat gold-plated connector contacts\u003c\/li\u003e\n\u003cli\u003eMetal KCPM connector housing, powder coated\u003c\/li\u003e\n\u003cli\u003eHigh-quality strain relief element\u003c\/li\u003e\n\u003cli\u003e99.95% oxygen-free copper conductor\u003c\/li\u003e\n\u003cli\u003eDual shielding: conductive foil plus spiral copper braid\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: instrument cable, jack-to-jack, mono\u003c\/li\u003e\n\u003cli\u003eLength: 3 m\u003c\/li\u003e\n\u003cli\u003eColor: black\u003c\/li\u003e\n\u003cli\u003eConnector A: 6.35mm jack, straight\u003c\/li\u003e\n\u003cli\u003eConnector B: 6.35mm jack, 90-degree angled\u003c\/li\u003e\n\u003cli\u003eContacts: gold-plated, 24-carat\u003c\/li\u003e\n\u003cli\u003eConductor: oxygen-free copper, 99.95% purity\u003c\/li\u003e\n\u003cli\u003eInsulation: lead-free PVC\u003c\/li\u003e\n\u003cli\u003eShielding: conductive foil plus spiral copper braid\u003c\/li\u003e\n\u003cli\u003eConnector housing: metal, black powder coating\u003c\/li\u003e\n\u003cli\u003eWeight: 0.2 kg\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":54186284712273,"sku":"60541","price":37.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KlotzKIKKG3.0PRSW.jpg?v=1782919438"},{"product_id":"klotz-kikkg6-0prsw","title":"Klotz KIKKG6.0PRSW","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eKlotz KIKKG6.0PRSW\u003c\/strong\u003e is a 6-meter jack-to-jack instrument cable from the KIK series, combining a budget price point with the build reliability Klotz is known for in its higher-end lines. A straight connector on one end and a 90-degree angled connector on the other make it easy to run into a guitar or bass and into an amp or audio interface input sitting low on the floor. The conductor is oxygen-free copper at 99.95% purity, insulated with lead-free PVC and wrapped in a conductive plastic shield plus a spiral copper braid, giving solid protection against electromagnetic interference on a stage full of gear.\u003c\/p\u003e\n\n\u003ch3\u003eA Connector Built for Daily Stage Wear\u003c\/h3\u003e\n\u003cp\u003eThe metal KCPM connector housing, finished in black powder coating, holds up far better against mechanical damage than the plastic connectors found on typical budget cables, and a high-quality strain relief protects the solder joint from breaking if the cable gets pulled unexpectedly. 24-carat gold-plated contacts keep electrical contact stable and resist corrosion, which matters for a cable that gets plugged and unplugged repeatedly on tour.\u003c\/p\u003e\n\n\u003ch3\u003eAn Angled Plug That Protects the Instrument Jack\u003c\/h3\u003e\n\u003cp\u003eThe 90-degree connector on the instrument side reduces mechanical stress on the guitar or bass input jack, which matters when playing standing up, where the cable often hangs at an angle and loads a straight connector unevenly. A rubber cable boot at the connector entry further guards against kinking at the point of highest wear. A flexible outer jacket makes the cable easy to coil and uncoil during quick stage changeovers.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCable length: 6 meters\u003c\/li\u003e\n\u003cli\u003eStraight and 90-degree angled connectors, 6.35mm mono jack\u003c\/li\u003e\n\u003cli\u003e24-carat gold-plated connector contacts\u003c\/li\u003e\n\u003cli\u003eMetal KCPM connector housing, powder coated\u003c\/li\u003e\n\u003cli\u003eHigh-quality strain relief element\u003c\/li\u003e\n\u003cli\u003e99.95% oxygen-free copper conductor\u003c\/li\u003e\n\u003cli\u003eDual shielding: conductive foil plus spiral copper braid\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: instrument cable, jack-to-jack, mono\u003c\/li\u003e\n\u003cli\u003eLength: 6 m\u003c\/li\u003e\n\u003cli\u003eColor: black\u003c\/li\u003e\n\u003cli\u003eConnector A: 6.35mm jack, straight\u003c\/li\u003e\n\u003cli\u003eConnector B: 6.35mm jack, 90-degree angled\u003c\/li\u003e\n\u003cli\u003eContacts: gold-plated, 24-carat\u003c\/li\u003e\n\u003cli\u003eConductor: oxygen-free copper, 99.95% purity\u003c\/li\u003e\n\u003cli\u003eInsulation: lead-free PVC\u003c\/li\u003e\n\u003cli\u003eShielding: conductive foil plus spiral copper braid\u003c\/li\u003e\n\u003cli\u003eConnector housing: metal, black powder coating\u003c\/li\u003e\n\u003cli\u003eWeight: 0.35 kg\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Klotz","offers":[{"title":"Default Title","offer_id":54186284745041,"sku":"60540","price":44.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/KlotzKIKKG6.0PRSW1.jpg?v=1782919421"}],"url":"https:\/\/wrdtunes.com\/de\/collections\/klotz.oembed","provider":"Wired Tunes","version":"1.0","type":"link"}