{"product_id":"lewitt-mtp-840-dm","title":"LEWITT MTP 840 DM","description":"\u003cdiv lang=\"en\"\u003e\n\n  \u003cp\u003e\u003cstrong\u003eLEWITT MTP 840 DM\u003c\/strong\u003e is a dynamic moving-coil \u003ca href=\"https:\/\/wrdtunes.com\/collections\/microphones\"\u003emicrophone\u003c\/a\u003e with a supercardioid polar pattern and a switchable phantom-powered active amplifier stage. The flagship dynamic in LEWITT's MTP stage series – and one of the very few dynamic microphones on the market to combine a moving-coil capsule with low-noise active electronics.\u003c\/p\u003e\n\n  \u003ch3\u003eActive Mode – Dynamic Body, Condenser Detail\u003c\/h3\u003e\n  \u003cp\u003eIn passive mode the MTP 840 DM operates as a conventional dynamic: sensitivity of 3.5 mV\/Pa, 135 dB dynamic range, no dependency on phantom power. Switching to active mode (48V phantom, 5.5 mA draw) engages the onboard low-noise amplifier, boosting sensitivity by +6 or +12 dB while keeping output impedance low. In active mode self-noise drops to 19 dB(A) and the tonal character shifts noticeably toward a condenser – fuller low end, more natural transient response, less aggressive presence peak. For an FOH engineer this translates directly to less corrective EQ on the vocal channel and more headroom in a dense mix. All switches – gain and low-cut – are recessed under the grille and marked by status LEDs that can be switched off, keeping settings readable in the dark without interfering with the performance.\u003c\/p\u003e\n\n  \u003ch3\u003eSupercardioid Pattern and Filtering for Demanding Stages\u003c\/h3\u003e\n  \u003cp\u003eThe supercardioid pickup pattern delivers higher gain before feedback and tighter side rejection than a standard cardioid – relevant whenever stage monitors are placed close and loud. The pattern remains consistent across the entire frequency range, which is uncommon in dynamic stage mics and directly means rear rejection doesn't collapse at lower frequencies. The two-position low-cut filter (150 Hz or 250 Hz, 12 dB\/oct slope) lets you control proximity effect and structure-borne noise without touching the console EQ. The capsule sits on an internal elastic suspension that minimises handling noise transmitted through the body. The structure-in-structure housing combines a zinc die-cast outer body with a nylon-reinforced ABS inner frame – built for daily touring without mechanical compromises.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eMoving-coil dynamic with switchable active amplifier stage (+6 dB \/ +12 dB)\u003c\/li\u003e\n    \u003cli\u003ePassive mode: no phantom dependency, 135 dB dynamic range\u003c\/li\u003e\n    \u003cli\u003eActive mode: 19 dB(A) self-noise, 121 dB dynamic range (at 0 dB gain)\u003c\/li\u003e\n    \u003cli\u003ePolar pattern: supercardioid – consistent across the full frequency range\u003c\/li\u003e\n    \u003cli\u003eSwitchable low-cut filter: 150 Hz or 250 Hz (12 dB\/oct)\u003c\/li\u003e\n    \u003cli\u003eRecessed switches under grille with LED status indicators (LEDs can be disabled)\u003c\/li\u003e\n    \u003cli\u003eIntegrated pop and wind filter built into the basket assembly\u003c\/li\u003e\n    \u003cli\u003eInternal elastic capsule suspension minimising handling noise\u003c\/li\u003e\n    \u003cli\u003eStructure-in-structure housing: zinc die-cast + nylon-reinforced ABS\u003c\/li\u003e\n    \u003cli\u003eGold-plated 3-pin XLR connector\u003c\/li\u003e\n    \u003cli\u003eIncludes: elastic shockmount and carrying pouch\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eTransducer type: dynamic, moving coil\u003c\/li\u003e\n    \u003cli\u003eOperating principle: pressure gradient transducer\u003c\/li\u003e\n    \u003cli\u003ePolar pattern: supercardioid\u003c\/li\u003e\n    \u003cli\u003eFrequency range: 40 Hz – 18,000 Hz\u003c\/li\u003e\n    \u003cli\u003eSensitivity (passive mode): 3.5 mV\/Pa (–49 dBV\/Pa)\u003c\/li\u003e\n    \u003cli\u003eActive mode gain settings: 0 dB \/ +6 dB \/ +12 dB\u003c\/li\u003e\n    \u003cli\u003eSignal-to-noise ratio: 75 dB(A)\u003c\/li\u003e\n    \u003cli\u003eSelf-noise (active mode): 19 dB(A)\u003c\/li\u003e\n    \u003cli\u003eDynamic range – passive mode: 135 dB\u003c\/li\u003e\n    \u003cli\u003eDynamic range – active mode: 121 dB (0 dB) \/ 115 dB (+6 dB) \/ 109 dB (+12 dB)\u003c\/li\u003e\n    \u003cli\u003eLow-cut filter: linear \/ 150 Hz \/ 250 Hz (12 dB\/oct)\u003c\/li\u003e\n    \u003cli\u003eInternal impedance: 600 Ω\u003c\/li\u003e\n    \u003cli\u003eRated load impedance: 1,000 Ω\u003c\/li\u003e\n    \u003cli\u003ePower (active mode): 48V phantom ±4V, 5.5 mA current draw\u003c\/li\u003e\n    \u003cli\u003eConnector: gold-plated 3-pin XLR\u003c\/li\u003e\n    \u003cli\u003eDimensions: 51 mm dia. × 183 mm\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"LEWITT","offers":[{"title":"Default Title","offer_id":53446342246737,"sku":"59298","price":223.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/LEWITTMTP840DM1.jpg?v=1775468700","url":"https:\/\/wrdtunes.com\/de-fr\/products\/lewitt-mtp-840-dm","provider":"Wired Tunes","version":"1.0","type":"link"}