{"product_id":"lewitt-lct-440-pure","title":"LEWITT LCT 440 PURE","description":"\u003cdiv lang=\"en\"\u003e\n\n  \u003cp\u003e\u003cstrong\u003eLEWITT LCT 440 PURE\u003c\/strong\u003e is a large-diaphragm FET studio condenser \u003ca href=\"https:\/\/wrdtunes.com\/collections\/microphones\"\u003emicrophone\u003c\/a\u003e with a 1\" true condenser capsule and a fixed cardioid polar pattern. LEWITT's bestselling model: no switches, no PAD, no onboard filters – the same capsule and circuit design as the higher-end LCT series models, stripped down to its essential form. Record-ready sound from the first take.\u003c\/p\u003e\n\n  \u003ch3\u003eSame Capsule, No Unnecessary Controls\u003c\/h3\u003e\n  \u003cp\u003eThe LCT 440 PURE was built by removing everything that isn't required for a great recording. The 3 µm gold-sputtered 1\" Mylar capsule is the same transducer found in LEWITT's more expensive LCT models – no mechanical or electronic compromises at the capsule level. The absence of PAD and low-cut filter switches is a deliberate design decision: the microphone handles up to 140 dBSPL without attenuation, and any low-frequency management happens at the interface or console. Self-noise of 7 dB(A) with a 133 dB(A) dynamic range covers the full range from quiet whisper-level sources to loud transient sources. A subtle lift around 4 kHz and 13 kHz adds natural presence and air to vocals and instruments – gentle enough not to sound harsh, pronounced enough to sit in a mix without extra EQ.\u003c\/p\u003e\n\n  \u003ch3\u003eCompact Format and Camera-Friendly Design\u003c\/h3\u003e\n  \u003cp\u003eAt 138 × 52 × 36 mm the LCT 440 PURE is among the smallest large-diaphragm microphones in the LCT series. The compact profile and the absence of a bulky pop filter blocking the face make it practical for on-camera recording, streaming, and desktop podcast setups – the camera captures the performer, not just a microphone grille. The magnetic pop filter clips directly to the shockmount, requiring no separate stand. The set includes a shockmount, magnetic pop filter, foam windscreen, and a leather carrying pouch.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003e1\" true condenser capsule – the same transducer as in higher-end LCT models\u003c\/li\u003e\n    \u003cli\u003ePolar pattern: cardioid (fixed, no switching)\u003c\/li\u003e\n    \u003cli\u003eSelf-noise: 7 dB(A)\u003c\/li\u003e\n    \u003cli\u003eMaximum SPL: 140 dBSPL (0.5% THD) – no PAD needed\u003c\/li\u003e\n    \u003cli\u003eDynamic range: 133 dB(A)\u003c\/li\u003e\n    \u003cli\u003eSubtle lift ~4 kHz and ~13 kHz – natural presence and air without harshness\u003c\/li\u003e\n    \u003cli\u003eNo PAD, no onboard low-cut filter – minimalist, zero-distraction design\u003c\/li\u003e\n    \u003cli\u003eCompact format – practical for camera-facing and streaming setups\u003c\/li\u003e\n    \u003cli\u003eMagnetic pop filter integrating directly with the shockmount\u003c\/li\u003e\n    \u003cli\u003eZinc die-cast housing, gold-plated 3-pin XLR connector\u003c\/li\u003e\n    \u003cli\u003eIncludes: shockmount, magnetic pop filter, windscreen, leather carrying pouch\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eTransducer type: FET condenser, externally polarized\u003c\/li\u003e\n    \u003cli\u003eOperating principle: pressure gradient transducer\u003c\/li\u003e\n    \u003cli\u003eDiaphragm: 3 µm gold-sputtered Mylar, 25.4 mm (1\")\u003c\/li\u003e\n    \u003cli\u003ePolar pattern: cardioid\u003c\/li\u003e\n    \u003cli\u003eFrequency range: 20 Hz – 20,000 Hz\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 27.4 mV\/Pa (–31.2 dBV\/Pa)\u003c\/li\u003e\n    \u003cli\u003eSelf-noise: 7 dB(A)\u003c\/li\u003e\n    \u003cli\u003eMaximum SPL (0.5% THD): 140 dBSPL\u003c\/li\u003e\n    \u003cli\u003eSignal-to-noise ratio: 87 dB(A)\u003c\/li\u003e\n    \u003cli\u003eDynamic range: 133 dB(A)\u003c\/li\u003e\n    \u003cli\u003eAttenuation pad: none\u003c\/li\u003e\n    \u003cli\u003eLow-cut filter: none on body\u003c\/li\u003e\n    \u003cli\u003eInternal impedance: 110 Ω\u003c\/li\u003e\n    \u003cli\u003eRated load impedance: 1,000 Ω\u003c\/li\u003e\n    \u003cli\u003ePower supply: 48V phantom ±4V, 2.63 mA current draw\u003c\/li\u003e\n    \u003cli\u003eConnector: gold-plated 3-pin XLR\u003c\/li\u003e\n    \u003cli\u003eEnclosure: zinc die cast\u003c\/li\u003e\n    \u003cli\u003eDimensions: 138 × 52 × 36 mm (5.43\" × 2.04\" × 1.42\")\u003c\/li\u003e\n    \u003cli\u003eWeight: 310 g (10.9 oz)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"LEWITT","offers":[{"title":"Default Title","offer_id":53446341493073,"sku":"59295","price":259.73,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/LEWITTLCT440PURE1.jpg?v=1775468821","url":"https:\/\/wrdtunes.com\/de-fr\/products\/lewitt-lct-440-pure","provider":"Wired Tunes","version":"1.0","type":"link"}