{"product_id":"aea-r92","title":"AEA R92","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eAEA R92\u003c\/strong\u003e is a passive ribbon microphone in a side-address format, engineered specifically for close-miking applications. The Big Ribbon element — 1.8-micron aluminum at 59.7 mm × 4.7 mm, with the same 16.5 Hz tuning and transformer as the flagship R44 — is housed in a new acoustic motor that suppresses proximity effect and delivers a flat tonal balance at 6–12 inches from the source. The pill-shaped body with its integrated shock mount and 360° swivel yoke distinguishes the R92 from most passive ribbon designs that require a separate shockmount and stand adapter.\u003c\/p\u003e\n\n  \u003ch3\u003eTwo Voices from One Ribbon — Front and Back as Distinct Tonalities\u003c\/h3\u003e\n  \u003cp\u003eThe R92 is the only passive AEA ribbon with deliberately asymmetric frequency voicing between the two lobes of its figure-8 pattern. The front face (marked by the AEA logo) is the \"crisp\" side — extended, clear top-end with pronounced midrange definition, suited for electric guitar, brass, and percussion where transient attack detail is essential for mix clarity. The back face is the \"smooth\" side — a classic gentle high-frequency rolloff reminiscent of the RCA 44, which softens harsh transients and handles aggressive sources more flatteringly. Both lobes share the same ribbon element and transformer; the tonal difference is entirely acoustic, derived from the housing geometry. Maximum SPL of 165+ dB makes the R92 one of the few passive ribbons that can be placed directly in front of a cranked guitar amplifier speaker without risk to the element.\u003c\/p\u003e\n\n  \u003ch3\u003ePassive Signal Path and Preamp Requirements\u003c\/h3\u003e\n  \u003cp\u003eThe R92 requires no phantom power and is not recommended with it — 48 V can destroy the ribbon element if the cable or preamp circuit is unbalanced or develops a fault. As a passive mic it needs a minimum of 60 dB gain and a load impedance of at least 1.2 kΩ to preserve full frequency response and dynamic range. For loud sources like guitar amplifiers, any console preamp presenting above 5 kΩ is adequate. For quiet acoustic sources or distance miking, AEA's own preamps (TRP3, TRP500, RPQ3, RPQ500) provide the optimal impedance match. The microphone ships with a 3-meter captive cable terminating in XLR-3M.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003ePassive Big Ribbon — same ribbon element, tuning (16.5 Hz), and transformer as the R44\u003c\/li\u003e\n    \u003cli\u003ePolar pattern: figure-8 (bidirectional)\u003c\/li\u003e\n    \u003cli\u003eDual tonality: front \"crisp\" (extended HF, mid presence) \/ rear \"smooth\" (classic HF rolloff)\u003c\/li\u003e\n    \u003cli\u003eSide-address format with integrated shock mount yoke\u003c\/li\u003e\n    \u003cli\u003e360° swivel mount — flexible positioning in tight spaces\u003c\/li\u003e\n    \u003cli\u003eFlat tonal balance at 15–30 cm from source (proximity effect compensated)\u003c\/li\u003e\n    \u003cli\u003eMax SPL: 165+ dB (1% THD harmonic distortion \u0026gt;1 kHz)\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 1.8 mV\/Pa (–55 dBV) into unloaded circuit\u003c\/li\u003e\n    \u003cli\u003eOutput impedance: 270 Ω broadband\u003c\/li\u003e\n    \u003cli\u003eRecommended load impedance: ≥1.2 kΩ\u003c\/li\u003e\n    \u003cli\u003ePhantom power: not required or recommended\u003c\/li\u003e\n    \u003cli\u003e3 m captive cable, XLR-3M connector\u003c\/li\u003e\n    \u003cli\u003eDimensions: 190 mm (H) × 74 mm (W) × 64 mm (D); weight approx. 0.9 kg with cable\u003c\/li\u003e\n    \u003cli\u003eHandmade in Pasadena, California, USA\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOperating principle: pressure gradient transducer (passive)\u003c\/li\u003e\n    \u003cli\u003ePolar pattern: figure-8 (bidirectional)\u003c\/li\u003e\n    \u003cli\u003eFrequency range: \u0026lt;20 Hz – \u0026gt;20 kHz\u003c\/li\u003e\n    \u003cli\u003eMax SPL: 165+ dB (1% THD \u0026gt;1 kHz)\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 1.8 mV\/Pa (–55 dBV) into unloaded circuit\u003c\/li\u003e\n    \u003cli\u003eOutput impedance: 270 Ω broadband\u003c\/li\u003e\n    \u003cli\u003eRecommended load impedance: ≥1.2 kΩ\u003c\/li\u003e\n    \u003cli\u003ePhantom power: not required or recommended\u003c\/li\u003e\n    \u003cli\u003ePolarity: Pin 2 + for positive pressure at front\u003c\/li\u003e\n    \u003cli\u003eOff-axis rejection: up to 90 dB at 90°\/270° (horizontal axis)\u003c\/li\u003e\n    \u003cli\u003eRibbon thickness: 1.8 µm; width: 4.7 mm; length: 59.7 mm\u003c\/li\u003e\n    \u003cli\u003eRibbon material: corrugated aluminum\u003c\/li\u003e\n    \u003cli\u003eResonant tuning: 16.5 Hz\u003c\/li\u003e\n    \u003cli\u003eConnector: XLR-3M on 3 m captive cable\u003c\/li\u003e\n    \u003cli\u003eDimensions: 190 mm × 74 mm × 64 mm; weight approx. 0.9 kg\u003c\/li\u003e\n    \u003cli\u003eMade in: USA (Pasadena, CA)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"AEA","offers":[{"title":"Default Title","offer_id":54014131274065,"sku":"29700","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/AEAR921.jpg?v=1781105223","url":"https:\/\/wrdtunes.com\/de-fr\/products\/aea-r92","provider":"Wired Tunes","version":"1.0","type":"link"}