{"title":"Morphor","description":"","products":[{"product_id":"morphor-plectrum","title":"Morphor PLECTRUM","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eMorphor Plectrum – Analogue BBD Pluck\u003c\/strong\u003e — a fully analogue Karplus-Strong voice module in an 8HP Eurorack format, successor to the AP-1, 2HP slimmer and with added CV control over feedback. A noise burst from the trigger feeds into a loop built around an authentic BBD circuit driven by an internal VCO with 1V\/oct tracking, filtered by the Colour section and fed back into the loop through adjustable feedback. Tune, colour and feedback all carry CV inputs, and trigger pulse width shifts the attack character - from short, string-like plucks to longer, more unstable tones. The frequency range spans sub-audio up to roughly 800 Hz.\u003c\/p\u003e\n\u003ch3\u003eA complete Karplus-Strong model in one module\u003c\/h3\u003e\n\u003cp\u003eClassic Karplus-Strong synthesis needs a noise generator, a delay line, a filter, and a feedback loop - in a modular rig that usually means several separate modules and a fair amount of patching. Plectrum closes that entire chain into a single 8HP module built on an authentic BBD, ready to fire from a single trigger. Short pulses give tones close to a plucked string or acoustic bass, longer ones bring rawer, more exploratory attacks - just change the trigger length, no mode-switching required.\u003c\/p\u003e\n\u003ch3\u003eA loop broken out for further shaping\u003c\/h3\u003e\n\u003cp\u003eThe built-in Colour filter limits the range of tones available without extra patching. The internal\/external loop switch lets you route the signal out of the Karplus-Strong circuit, through an external filter or effect, and back into the feedback loop. This means the string character is no longer locked inside the module - resonances and tones out of reach for purely internal models become possible, while the BBD core still handles the analogue character.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e100% analogue signal path built on a classic BBD chip\u003c\/li\u003e\n\u003cli\u003eKarplus-Strong synthesis\u003c\/li\u003e\n\u003cli\u003eInternal\/external loop switch for break-out\u003c\/li\u003e\n\u003cli\u003eTrigger input with variable length shaping attack character\u003c\/li\u003e\n\u003cli\u003e1V\/oct input and tune knob\u003c\/li\u003e\n\u003cli\u003ePitch modulation CV input\u003c\/li\u003e\n\u003cli\u003eFeedback CV input\u003c\/li\u003e\n\u003cli\u003eColour CV input (internal loop filter cutoff)\u003c\/li\u003e\n\u003cli\u003eMono output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 8 HP\u003c\/li\u003e\n\u003cli\u003eHeight: 3U\u003c\/li\u003e\n\u003cli\u003eModule depth: 40 mm\u003c\/li\u003e\n\u003cli\u003ePanel dimensions: 128.5 x 40.3 x 40 mm\u003c\/li\u003e\n\u003cli\u003eMass: 107 g\u003c\/li\u003e\n\u003cli\u003eFrequency range: sub-audio up to roughly 800 Hz\u003c\/li\u003e\n\u003cli\u003ePower socket: 16-pin\u003c\/li\u003e\n\u003cli\u003eCurrent draw: +12V 40 mA, -12V 40 mA, +5V 0 mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Morphor","offers":[{"title":"Default Title","offer_id":54206534025553,"sku":"60558","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/MorphorPLECTRUM-AnalogueBBDPluck.jpg?v=1783715946"},{"product_id":"morphor-vcf","title":"Morphor VCF","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eMorphor VCF – Multimode\u003c\/strong\u003e — an analogue multimode filter in an 8HP Eurorack format, built around two independent cores: a lowpass and a highpass. Each section has its own cutoff knob sweeping the full audible range, a bipolar CV input, and a separate resonance control, while a slope switch sets the rolloff at 6, 12 or 24 dB per octave independently for each filter. The BP\/HP Mix control blends the bandpass output with the highpass, giving a smooth transition between bandpass character and clean highpass. Pushing resonance high enough drives both filters into self-oscillation, turning the module into an extra sine-tone source.\u003c\/p\u003e\n\u003ch3\u003eTwo independent filter cores instead of one compromise\u003c\/h3\u003e\n\u003cp\u003eA typical multimode filter switches a single core between LP, HP and BP modes, so only one character is available at a time. VCF Multimode runs two separate cores - LP and HP - simultaneously, each with its own cutoff, resonance, and slope selection. That makes it possible to run a resonant lowpass sweep on one signal while shaping the top end of the same or a different source with the second section, with no mode-switching mid-performance.\u003c\/p\u003e\n\u003ch3\u003eSelf-oscillation as a free oscillator, plus smooth BP\/HP mixing\u003c\/h3\u003e\n\u003cp\u003eDriving both sections' resonance to maximum pushes the filter into self-oscillation, yielding clean sine tones without adding an oscillator to the patch - useful for bell-like, metallic tones or an extra modulation voice. The BP\/HP Mix control lets you glide smoothly between a strong bandpass character and clean highpass, so a single knob replaces a dedicated bandpass filter module when designing narrower, resonant tones.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e100% analogue signal path\u003c\/li\u003e\n\u003cli\u003eIndependent filter cores: lowpass and highpass\u003c\/li\u003e\n\u003cli\u003eSlope selection per section: 6, 12 or 24 dB\/octave\u003c\/li\u003e\n\u003cli\u003eSeparate resonance control per section, with self-oscillation\u003c\/li\u003e\n\u003cli\u003eCV input for LP cutoff and for HP\/BP cutoff\u003c\/li\u003e\n\u003cli\u003eBP\/HP Mix control\u003c\/li\u003e\n\u003cli\u003eMono input, LP output, and BP\/HP output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 8 HP\u003c\/li\u003e\n\u003cli\u003eHeight: 3U\u003c\/li\u003e\n\u003cli\u003eModule depth: 40 mm\u003c\/li\u003e\n\u003cli\u003eMass: 111 g\u003c\/li\u003e\n\u003cli\u003ePower socket: 16-pin\u003c\/li\u003e\n\u003cli\u003eCurrent draw: +12V 35 mA, -12V 50 mA, +5V 0 mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Morphor","offers":[{"title":"Default Title","offer_id":54206534517073,"sku":"60566","price":189.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/MorphorVCF-Multimode.jpg?v=1783715937"},{"product_id":"morphor-vca","title":"Morphor VCA","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eMorphor VCA – Dual Lin\/Exp\u003c\/strong\u003e — a compact, fully analogue dual voltage-controlled amplifier in a 6HP Eurorack format, fully DC-coupled to work with both audio and CV. Each of the two independent channels has a main gain knob, an attenuated CV input, an LED level indicator, and a switch selecting linear or exponential response. Attenuation reaches 120 dB, so a channel closed to zero passes no audible bleed even with quiet sources. When the first channel's output is left unpatched, the signal is automatically normalized to the second channel's input, forming a simple two-channel mixer with independent level control over each source.\u003c\/p\u003e\n\u003ch3\u003eLinear and exponential response in one module\u003c\/h3\u003e\n\u003cp\u003eMixing CV or precisely scaling control voltages calls for a linear response - gain change proportional to the CV input voltage. Shaping perceived loudness works better with an exponential response, closer to how the ear perceives volume and typical of classic VCA envelopes. The lin\/exp switch on each channel matches the response curve to the job without reaching for two separate modules - one channel can run linear as a CV mixer while the other runs exponential as a VCA driven by an ADSR envelope.\u003c\/p\u003e\n\u003ch3\u003eAutomatic normalization as a two-channel mixer\u003c\/h3\u003e\n\u003cp\u003eWhen the first channel's output is left unpatched, its signal feeds automatically into the second channel's input, so two independently controlled sources can be combined into one output without an extra cable or a dedicated mixer module. Each of the two levels is set separately through gain and CV, which makes it possible to fade one source out while holding the other steady - a practical setup for simple crossfades or gated summing of two signals.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e100% analogue, fully DC-coupled signal path\u003c\/li\u003e\n\u003cli\u003eTwo independent VCA channels\u003c\/li\u003e\n\u003cli\u003eLinear\/exponential response switch per channel\u003c\/li\u003e\n\u003cli\u003eMain gain knob and attenuated CV input per channel\u003c\/li\u003e\n\u003cli\u003eLED level indicator on each channel\u003c\/li\u003e\n\u003cli\u003eAttenuation up to 120 dB\u003c\/li\u003e\n\u003cli\u003eAutomatic normalization of the first output to the second input\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 6 HP\u003c\/li\u003e\n\u003cli\u003eHeight: 3U\u003c\/li\u003e\n\u003cli\u003eModule depth: 30.5 mm\u003c\/li\u003e\n\u003cli\u003ePanel dimensions: 128.5 x 40.6 x 30.5 mm\u003c\/li\u003e\n\u003cli\u003eMass: 89 g\u003c\/li\u003e\n\u003cli\u003eAttenuation: up to 120 dB\u003c\/li\u003e\n\u003cli\u003ePower socket: 16-pin\u003c\/li\u003e\n\u003cli\u003eCurrent draw: +12V 35 mA, -12V 30 mA, +5V 0 mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Morphor","offers":[{"title":"Default Title","offer_id":54206538023249,"sku":"60555","price":129.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/MorphorVCA-DualLin_Exp.jpg?v=1783715926"},{"product_id":"morphor-mult","title":"Morphor MULT","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eMorphor Mult – Buffered\u003c\/strong\u003e — a buffered multiple in a 2HP Eurorack format, fully DC-coupled and ready to duplicate both audio and CV signals. A rear switch chooses between 1-to-8 mode, giving eight identical copies of a single input signal, and Double mode, which works as 1-to-4 and 1-to-3 for two independent inputs. If the second input is left unpatched, the first signal is automatically normalized to all eight outputs, so the module behaves as a full 1-to-8 mult without any extra switching.\u003c\/p\u003e\n\u003ch3\u003eA buffer instead of a passive splitter\u003c\/h3\u003e\n\u003cp\u003eA passive mult splits a signal by loading the source with every output that gets patched - on 1V\/oct signals this leads to slight but audible detuning, and on CV it weakens the control voltage. Mult's buffered design isolates each output with its own gain stage, so splitting a clock, an envelope, or a 1V\/oct signal eight ways introduces no voltage sag or tuning drift, regardless of how many outputs are in use at once.\u003c\/p\u003e\n\u003ch3\u003eOne mult, two patching scenarios\u003c\/h3\u003e\n\u003cp\u003eSometimes you need a single signal routed to eight destinations at once - a clock feeding several sequencers, for instance. Other times two independent signals work better, each split into a few copies, such as two different envelopes controlling separate sections of a patch. The rear switch flips the module from 1-to-8 to Double (1-to-4 plus 1-to-3), so one 2HP module covers both scenarios without keeping two separate mults in the rack.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e100% analogue, buffered signal path\u003c\/li\u003e\n\u003cli\u003eFully DC-coupled - works with audio and CV\u003c\/li\u003e\n\u003cli\u003eMode switch: 1-to-8 or Double (1-to-4 + 1-to-3)\u003c\/li\u003e\n\u003cli\u003eAutomatic normalization of the first input when the second is unused\u003c\/li\u003e\n\u003cli\u003eCompact 2HP enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 2 HP\u003c\/li\u003e\n\u003cli\u003eHeight: 3U\u003c\/li\u003e\n\u003cli\u003eModule depth: 30 mm\u003c\/li\u003e\n\u003cli\u003ePanel dimensions: 128.5 x 9.8 x 30 mm\u003c\/li\u003e\n\u003cli\u003eMass: 27 g\u003c\/li\u003e\n\u003cli\u003ePower socket: 10-pin\u003c\/li\u003e\n\u003cli\u003eCurrent draw: +12V 12 mA, -12V 12 mA, +5V 0 mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Morphor","offers":[{"title":"Default Title","offer_id":54206538121553,"sku":"60554","price":79.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/MorphorMULT-Buffered.jpg?v=1783715902"},{"product_id":"morphor-mixer","title":"Morphor MIXER","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eMorphor Mixer – 5 Channel Amplifier\u003c\/strong\u003e — a five-channel analogue mixer in an 8HP Eurorack format, built to sum both audio and CV signals. Each of the five channels carries its own attenuator and mute switch, and an AC\/DC switch on the rear decides whether inputs pass DC content, which is needed when mixing control voltages. The output stage adds an extra gain stage that can double the level of the mixed signal, while a clipping LED on the master output warns before the sum starts to distort. Master mute silences the entire output in one move, with no cables to pull.\u003c\/p\u003e\n\u003ch3\u003eOne mixer for audio and CV\u003c\/h3\u003e\n\u003cp\u003eA conventional AC-coupled audio mixer strips the DC content and won't work for mixing control voltages - envelopes, LFOs, or CV sequences lose their offset and drift. The AC\/DC switch on the back of the Mixer flips the module in one step from standard audio summing to full DC-coupled CV mixing, so the same unit works as a submixer for drums or mono voices as well as a modulation mixer combining several CV sources into one composite control signal.\u003c\/p\u003e\n\u003ch3\u003eInstant playability on stage\u003c\/h3\u003e\n\u003cp\u003eFive independent mute switches let you cut and bring back individual channels in real time, without touching an attenuator or risking an accidental level change - useful for improvised shifts mid-performance. Master mute silences the whole sum in one move, and the final gain stage, with its option to double the signal, compensates for low input levels without pre-boosting each channel individually. A clipping LED on the output gives instant feedback the moment the sum crosses a safe range.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e100% analogue signal path\u003c\/li\u003e\n\u003cli\u003eFive input channels with attenuator and mute\u003c\/li\u003e\n\u003cli\u003eAC\/DC-coupled switch on the rear\u003c\/li\u003e\n\u003cli\u003eExtra output gain stage with signal-doubling option\u003c\/li\u003e\n\u003cli\u003eMaster mute\u003c\/li\u003e\n\u003cli\u003eClipping LED on the master output\u003c\/li\u003e\n\u003cli\u003e5 mono inputs, one mono master output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 8 HP\u003c\/li\u003e\n\u003cli\u003eHeight: 3U\u003c\/li\u003e\n\u003cli\u003eModule depth: 30 mm\u003c\/li\u003e\n\u003cli\u003ePanel dimensions: 128.5 x 40.3 x 30 mm\u003c\/li\u003e\n\u003cli\u003eMass: 103 g\u003c\/li\u003e\n\u003cli\u003ePower socket: 16-pin\u003c\/li\u003e\n\u003cli\u003eCurrent draw: +12V 12 mA, -12V 10 mA, +5V 0 mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Morphor","offers":[{"title":"Default Title","offer_id":54206539759953,"sku":"60559","price":179.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/MorphorMIXER-5ChannelAmplifier.jpg?v=1783715892"},{"product_id":"morphor-distortion","title":"Morphor DISTORTION","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eMorphor Distortion – LED Based\u003c\/strong\u003e — a compact analogue distortion module in a 4HP Eurorack format, loosely based on the circuit of a classic MXR pedal. Clipping is performed by LEDs that also light up on the front panel, so signal destruction is visible in real time without hooking up a scope. Gain level is voltage-controlled, and a three-position switch (low, med, high) shifts the character of the distortion from subtle grit to hard, aggressive clipping. A dry\/wet mix control lets you keep part of the original signal alongside the distorted version, and a mono input and mono output keep patching straightforward.\u003c\/p\u003e\n\u003ch3\u003eCV-controlled gain and three distortion modes\u003c\/h3\u003e\n\u003cp\u003eA static distortion pedal is set once and left alone - in a modular rig you often need something that responds to an envelope, a sequencer, or an LFO. The gain CV input lets you modulate distortion intensity in step with the patch, from a light dusting of harmonics on quiet passages to a full tear-up at the peaks. The low\/med\/high switch sets the clipping character independent of gain level - from subtle, guitar-pedal-like grit through to harsher clipping at the highest setting.\u003c\/p\u003e\n\u003ch3\u003eVisual feedback and dry\/wet blending\u003c\/h3\u003e\n\u003cp\u003eThe LEDs doing the clipping sit right on the front panel, so distortion intensity can be judged by eye during a performance, with no extra meter or scope needed on stage. The dry\/wet control blends the distorted signal with the original, which keeps low end and transient attack intact while still adding upper-harmonic content - useful especially on bass lines and percussive sources that lose definition fast under full distortion.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e100% analogue signal path\u003c\/li\u003e\n\u003cli\u003eLED-based clipping, visible on the front panel\u003c\/li\u003e\n\u003cli\u003eCV input for gain level\u003c\/li\u003e\n\u003cli\u003eDistortion mode switch: low, med, high\u003c\/li\u003e\n\u003cli\u003eDry\/wet mix control\u003c\/li\u003e\n\u003cli\u003eMono input, mono output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 4 HP\u003c\/li\u003e\n\u003cli\u003eHeight: 3U\u003c\/li\u003e\n\u003cli\u003eModule depth: 40 mm\u003c\/li\u003e\n\u003cli\u003ePanel dimensions: 128.5 x 20 x 40 mm\u003c\/li\u003e\n\u003cli\u003eMass: 53 g\u003c\/li\u003e\n\u003cli\u003ePower socket: 16-pin\u003c\/li\u003e\n\u003cli\u003eCurrent draw: +12V 25 mA, -12V 25 mA, +5V 0 mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Morphor","offers":[{"title":"Default Title","offer_id":54206539923793,"sku":"60563","price":129.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/MorphorDISTORTION-LEDBased.jpg?v=1783715878"},{"product_id":"morphor-ensemble","title":"Morphor ENSEMBLE","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eMorphor Ensemble\u003c\/strong\u003e — an 8-voice, fully analogue BBD chorus in a 12HP Eurorack format, built around eight classic bucket brigade chips. The input signal feeds eight independent delay lines, the module offers three voice-count modes, and the time spacing between them (Spread) is voltage-controllable, as is modulation depth. Two onboard LFOs - slow (0-5 Hz) and fast (0-20 Hz), both with CV inputs - give asymmetric delay-time modulation typical of the best-sounding analogue choruses from the 80s. A fixed panoramic stereo spread lays the voices across the stereo field, while separate input attenuator and dry-add knobs set the balance between BBD character and the original signal.\u003c\/p\u003e\n\u003ch3\u003eVoice count - from subtle thickening to a full choir\u003c\/h3\u003e\n\u003cp\u003eThe voice switch (2, 4 or 8) decides how many of the eight BBD lines run at once, so effect intensity gets matched to the material instead of sitting on one fixed chorus setting. Two voices give a subtle widening of a mono synth, four bring a clearer humanization to strings or pads, and the full eight open the door to dense, orchestral textures and extreme pitch-bending. The voltage-controlled Spread pulls the delay times between active voices apart, so that spacing can be modulated on the fly instead of set once and left alone.\u003c\/p\u003e\n\u003ch3\u003eFeedback into self-oscillation, plus two independent LFOs\u003c\/h3\u003e\n\u003cp\u003eThe feedback knob feeds extra repeats from the BBD lines back into the input, up to full self-oscillation - well past a normal chorus and into resonant flanger tones and effects close to granular pitch-shifting. Two independent LFOs, slow at 0-5 Hz and fast at 0-20 Hz, modulate delay time independently and each carry separate CV inputs for frequency and depth, making asymmetric, lively vibrato possible instead of the even wobble typical of a single-LFO chorus.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e100% analogue signal path built on 8 BBD chips\u003c\/li\u003e\n\u003cli\u003eVoice-count switch: 2, 4 or 8\u003c\/li\u003e\n\u003cli\u003eVoltage-controlled Spread\u003c\/li\u003e\n\u003cli\u003eSlow LFO 0-5 Hz with CV for frequency and depth\u003c\/li\u003e\n\u003cli\u003eFast LFO 0-20 Hz with CV for frequency and depth\u003c\/li\u003e\n\u003cli\u003eFeedback control with self-oscillation\u003c\/li\u003e\n\u003cli\u003eFixed panoramic stereo spread\u003c\/li\u003e\n\u003cli\u003eInput attenuator and dry-add control\u003c\/li\u003e\n\u003cli\u003eMono input, stereo or mono output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 12 HP\u003c\/li\u003e\n\u003cli\u003eHeight: 3U\u003c\/li\u003e\n\u003cli\u003eModule depth: 40 mm\u003c\/li\u003e\n\u003cli\u003ePanel dimensions: 128.5 x 60.6 x 40 mm\u003c\/li\u003e\n\u003cli\u003eMass: 171 g\u003c\/li\u003e\n\u003cli\u003ePower socket: 16-pin\u003c\/li\u003e\n\u003cli\u003eCurrent draw: +12V 110 mA, -12V 80 mA, +5V 0 mA\u003c\/li\u003e\n\u003cli\u003eSlow LFO: 0-5 Hz\u003c\/li\u003e\n\u003cli\u003eFast LFO: 0-20 Hz\u003c\/li\u003e\n\u003cli\u003eBBD lines: 8\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Morphor","offers":[{"title":"Default Title","offer_id":54206539989329,"sku":"60560","price":399.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/MorphorENSEMBLE-Analogue8VoiceBBDChorus.jpg?v=1783715863"},{"product_id":"morphor-lfo","title":"Morphor LFO","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eMorphor LFO – Dual\u003c\/strong\u003e — a two-channel analogue low-frequency oscillator in a 6HP Eurorack format. Each independent channel outputs five waveforms at once: triangle, square, sine, saw and inverted saw, so there is no need to switch shapes mid-performance or add another module to the patch. A three-position range switch moves the oscillator from well under one cycle per minute up into audible territory above 4 kHz, letting the same module cover slow ambient movement and audio-rate modulation alike. A reset input on each channel syncs the waveform cycle to an external trigger.\u003c\/p\u003e\n\u003ch3\u003eFive waveforms from one channel at once\u003c\/h3\u003e\n\u003cp\u003eA typical patch calls for different modulation shapes for different jobs - triangle for a filter sweep, square for gating, sine for vibrato. Instead of racking several single LFOs or switching shape by hand mid-session, Dual LFO sends all five waves to separate outputs simultaneously, at the same frequency and phase. Two independent channels in 6HP add up to ten simultaneous modulation outputs ready to be routed anywhere in the system.\u003c\/p\u003e\n\u003ch3\u003eFrom ambient crawl to audio-rate modulation\u003c\/h3\u003e\n\u003cp\u003eThe Low range goes down to 0.005 Hz, a cycle lasting over three minutes - useful for slow, barely perceptible timbral shifts in drones and textures. The High range reaches 4250 Hz, well into audible territory, letting the module double as a source for ring modulation or FM instead of a dedicated audio oscillator. Bipolar LED indicators on each channel make phase and frequency readable at a glance, no oscilloscope required.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo independent LFO channels in a single 6HP module\u003c\/li\u003e\n\u003cli\u003e100% analogue signal path\u003c\/li\u003e\n\u003cli\u003eSimultaneous outputs: triangle, square, sine, saw, inverted saw\u003c\/li\u003e\n\u003cli\u003eThree-position frequency range switch: Low, Med, High\u003c\/li\u003e\n\u003cli\u003eCycle reset input on each channel\u003c\/li\u003e\n\u003cli\u003eBipolar LED indicators per channel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 6 HP\u003c\/li\u003e\n\u003cli\u003eHeight: 3U\u003c\/li\u003e\n\u003cli\u003eModule depth: 25 mm\u003c\/li\u003e\n\u003cli\u003ePanel dimensions: 128.5 x 30.3 x 25 mm\u003c\/li\u003e\n\u003cli\u003eMass: 71 g\u003c\/li\u003e\n\u003cli\u003ePower socket: 10-pin\u003c\/li\u003e\n\u003cli\u003eCurrent draw: +12V 22 mA, -12V 22 mA, +5V 0 mA\u003c\/li\u003e\n\u003cli\u003eLow range: 0.005 to 1.5 Hz\u003c\/li\u003e\n\u003cli\u003eMed range: 1.5 to 425 Hz\u003c\/li\u003e\n\u003cli\u003eHigh range: 15 to 4250 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Morphor","offers":[{"title":"Default Title","offer_id":54206543167825,"sku":"60556","price":129.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/MorphorLFO-Dual.jpg?v=1783715846"},{"product_id":"morphor-adsr","title":"Morphor ADSR","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eMorphor Envelope – Dual ADSR\u003c\/strong\u003e — a two-channel analogue ADSR envelope generator in a 6HP Eurorack format. The module packs two fully independent ADSR circuits onto a single narrow panel, letting one unit drive a VCA and a filter cutoff at the same time instead of taking up two slots in the case. The analogue circuitry reacts instantly to a gate signal, and rear-panel range switches let you stretch envelope duration from single milliseconds to multi-minute swells. Gate and trigger inputs accept voltages from 2.5V to 10V, so the module pairs cleanly with most sequencers and CV\/gate keyboards.\u003c\/p\u003e\n\u003ch3\u003eTwo ADSR channels, no rack-space penalty\u003c\/h3\u003e\n\u003cp\u003ePanel space is scarce in compact systems. Dual ADSR fits two complete envelope circuits into 6HP, so a single module covers amplitude shaping through a VCA and cutoff modulation on a filter at once. Each channel keeps its own attack, decay, sustain and release knobs plus a full set of inputs and outputs, so neither circuit is a compromise built to share one envelope across two jobs.\u003c\/p\u003e\n\u003ch3\u003eRange switching from percussive hits to drones\u003c\/h3\u003e\n\u003cp\u003eRear switches set each channel independently to one of three ranges: Short (5 ms to 30 s), Med (25 ms to 60 s) or Long (60 ms to 200 s). That spread covers tight percussive envelopes for hit-based synthesis as well as the slow builds typical of drones and ambient work. An inverted output (-5V to 0V) adds inverse-phase control without patching in a separate inverter.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo fully independent ADSR channels in a single 6HP module\u003c\/li\u003e\n\u003cli\u003e100% analogue signal path\u003c\/li\u003e\n\u003cli\u003eSeparate attack, decay, sustain and release knobs per channel\u003c\/li\u003e\n\u003cli\u003eGate and re-trigger inputs on each channel\u003c\/li\u003e\n\u003cli\u003eStandard 0-5V output plus an inverted -5-0V output\u003c\/li\u003e\n\u003cli\u003eRear-panel switchable envelope length ranges: Short, Med, Long\u003c\/li\u003e\n\u003cli\u003eAnodized aluminium front panel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWidth: 6 HP\u003c\/li\u003e\n\u003cli\u003eHeight: 3U\u003c\/li\u003e\n\u003cli\u003eModule depth: 40 mm\u003c\/li\u003e\n\u003cli\u003ePanel dimensions: 128.5 x 30.3 x 40 mm\u003c\/li\u003e\n\u003cli\u003eCurrent draw: +12V 32 mA, -12V 32 mA, +5V 0 mA\u003c\/li\u003e\n\u003cli\u003eShort range: 5 ms to 30 s\u003c\/li\u003e\n\u003cli\u003eMed range: 25 ms to 60 s\u003c\/li\u003e\n\u003cli\u003eLong range: 60 ms to 200 s (3.3 min)\u003c\/li\u003e\n\u003cli\u003eGate\/trigger control voltage: 2.5 to 10V\u003c\/li\u003e\n\u003cli\u003eEnvelope output: 0-5V, inverted output: -5-0V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Morphor","offers":[{"title":"Default Title","offer_id":54206543266129,"sku":"60565","price":129.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/MorphorADSR-Dual.jpg?v=1783715831"},{"product_id":"morphor-sequencer","title":"Morphor SEQUENCER","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eMorphor Sequencer - Quad Gate\/CV\u003c\/strong\u003e – four-track gate and CV sequencer for Eurorack systems, in a footprint of just 4 HP.\n\nThe module can be set up as a two-, three-, or four-track sequencer depending on the chosen output configuration: four gate tracks, one gate\/CV track plus two gate tracks, two gate\/CV tracks, a triad chord track, or four CV tracks. Each track holds up to 16 pages of 16 steps, for up to 256 steps per track, with individual control over step length, glide time, and playback order (up, down, pendulum, random). A built-in internal clock lets the module run standalone, and the clock and reset jacks can be configured as either inputs or outputs when integrating with the rest of the system.\n\n\u003ch3\u003eFour sequencing tracks in just 4 HP\u003c\/h3\u003e\nThe compact panel width doesn't limit functionality - the module offers a chord mode with a single gate and a triad voltage, an arpeggiator, per-step trigger probability, and configurable gate output voltage (5V or 8V) along with CV standards (1V\/octave, 1.2V\/octave for Buchla systems, or Hz\/V). That feature set packs an elaborate sequencing section into a small slice of rack space, leaving more room for sound-generating modules.\n\n\u003ch3\u003eChaining modules for larger live sequences\u003c\/h3\u003e\nSeveral Sequencer units can be linked together through a bus connector on the rear of the module, so clock and reset signals are shared automatically across every connected unit without extra front-panel cabling. A built-in mini keyboard for entering gates and CV live, along with color RGB buttons, makes editing sequences and tracking the currently playing page easier during a live set, without needing to look away from the rest of the patch.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConfigurable 2-, 3-, or 4-track sequencer (gate, CV, gate\/CV, triad)\u003c\/li\u003e\n\u003cli\u003eUp to 16 pages of 16 steps per track (up to 256 steps)\u003c\/li\u003e\n\u003cli\u003eChord mode, arpeggiator, and per-step probability\u003c\/li\u003e\n\u003cli\u003eInternal clock plus configurable clock\/reset inputs or outputs\u003c\/li\u003e\n\u003cli\u003eDaisy-chaining of multiple modules via a rear bus connector\u003c\/li\u003e\n\u003cli\u003eFirmware updates over USB-C\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModule type: four-track gate\/CV sequencer\u003c\/li\u003e\n\u003cli\u003ePanel width: 4 HP\u003c\/li\u003e\n\u003cli\u003ePanel height: 3 U\u003c\/li\u003e\n\u003cli\u003eModule depth: 33 mm\u003c\/li\u003e\n\u003cli\u003eDimensions: 128.5 x 20 x 33 mm\u003c\/li\u003e\n\u003cli\u003eMass: 56 g\u003c\/li\u003e\n\u003cli\u003ePower connector: 16-pin\u003c\/li\u003e\n\u003cli\u003eCurrent draw +12V: 95 mA\u003c\/li\u003e\n\u003cli\u003eCurrent draw -12V: 11 mA\u003c\/li\u003e\n\u003cli\u003eCurrent draw +5V: 123 mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Morphor","offers":[{"title":"Default Title","offer_id":54206544052561,"sku":"60557","price":239.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/MorphorSEQUENCER-QuadGate_CV.jpg?v=1783854223"},{"product_id":"morphor-echo","title":"Morphor ECHO","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eMorphor Echo\u003c\/strong\u003e – fully analog, quad-tap stereo delay built on BBD chips, in a 20HP format.\n\nThe module runs four independent 4096-stage BBD chips, each with its own tap output, giving a delay range from 10 ms to 2040 ms on a fully analog signal path with no digital conversion. Beyond the four mono outputs, a stereo mix of the fourth tap and an overall stereo mix of all taps together are also available, for a total of eight output points to patch further into a modular system. Feedback can be phase-inverted or routed through an external feedback input, opening up additional processing of the return signal outside the module.\n\n\u003ch3\u003eFour independent outputs for complex spatial textures\u003c\/h3\u003e\nThree panning modes - Ping-Pong, Traverse, and Chaos - with an adjustable Spread parameter distribute the taps across the stereo field in different ways, from alternating bounces between channels to randomly placed repeats. That setup builds an elaborate spatial texture from a single delay module, without chaining several separate delay units or adding extra panning on an external mixer.\n\n\u003ch3\u003eTempo sync without losing the analog character\u003c\/h3\u003e\nDelay time can be set manually with a knob, a tap tempo button, or a clock signal accepting both 1 PPQN and 24 PPQN, letting Echo sync to a sequencer or another tempo source in the system. A low-pass filter tracking mode switch (early\/late) lets you choose between a brighter tone and lower noise at long delay times - the classic BBD trade-off, handed here directly to the user instead of buried in a fixed factory setting.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFour independent 4096-stage BBD chips, fully analog signal path\u003c\/li\u003e\n\u003cli\u003eDelay range from 10 ms to 2040 ms\u003c\/li\u003e\n\u003cli\u003eEight outputs: four mono taps, tap 4 stereo mix, overall stereo mix\u003c\/li\u003e\n\u003cli\u003eThree panning modes: Ping-Pong, Traverse, Chaos with Spread control\u003c\/li\u003e\n\u003cli\u003eClock sync at 1\/24 PPQN, tap tempo, and CV control\u003c\/li\u003e\n\u003cli\u003eFilter tracking mode switch: early\/late\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModule type: analog BBD-based stereo delay\u003c\/li\u003e\n\u003cli\u003ePanel width: 20 HP\u003c\/li\u003e\n\u003cli\u003ePanel height: 3 U\u003c\/li\u003e\n\u003cli\u003eModule depth: 33 mm\u003c\/li\u003e\n\u003cli\u003eDimensions: 128.5 x 101.6 x 33 mm\u003c\/li\u003e\n\u003cli\u003eMass: 245 g\u003c\/li\u003e\n\u003cli\u003ePower connector: 16-pin\u003c\/li\u003e\n\u003cli\u003eCurrent draw +12V: 155 or 205 mA\u003c\/li\u003e\n\u003cli\u003eCurrent draw -12V: 120 mA\u003c\/li\u003e\n\u003cli\u003eCurrent draw +5V: 50 or 0 mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Morphor","offers":[{"title":"Default Title","offer_id":54206544019793,"sku":"60564","price":399.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/MorphorECHO-AnalogueQuadTapBBDStereoDelay.jpg?v=1783854214"},{"product_id":"morphor-vco","title":"Morphor VCO","description":"\u003cdiv lang=\"en\"\u003e\n\u003cstrong\u003eMorphor VCO\u003c\/strong\u003e – fully analog voltage-controlled oscillator for Eurorack systems, built around the 3340 architecture, in a 6HP format.\n\nThe module provides four independent waveform outputs - triangle, sine, square, and saw - available simultaneously, letting you blend several waveshapes from a single oscillator without adding a separate mixing stage. A three-position octave switch shifts the tuning range in steps, while a dedicated tune knob together with a CV input and an attenuated FM input give precise pitch control for both manual tuning and modulation from a sequencer or another oscillator. A hard sync input and pulse-width modulation (PWM) extend the module into synthesis techniques beyond basic waveforms.\n\n\u003ch3\u003eA tonal foundation built on the classic 3340 chip\u003c\/h3\u003e\nThe 3340 architecture, known from many classic analog synthesizers, accounts for the characteristic tuning stability and warm timbre of the analog-generated waveforms, with no digital signal processing anywhere in the path. That foundation lets you build bass lines and lead sections with a classic analog character, while benefiting from a modern, miniaturized implementation of the chip inside a compact Eurorack module.\n\n\u003ch3\u003eA compact format without functional compromises\u003c\/h3\u003e\nAt just 6HP wide, the module packs four simultaneous waveform outputs, hard sync, PWM, and an attenuated FM input - a feature set typically found on oscillators with a much wider panel. That matters directly when building out a larger modular system, where case space is a limited resource, and every HP saved leaves room for another filter, envelope, or sequencer module without giving up full oscillator functionality.\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFully analog architecture built around the 3340 chip\u003c\/li\u003e\n\u003cli\u003eFour simultaneous outputs: triangle, sine, square, saw\u003c\/li\u003e\n\u003cli\u003eThree-position octave switch\u003c\/li\u003e\n\u003cli\u003eAttenuated FM input and CV input for tuning\u003c\/li\u003e\n\u003cli\u003ePulse-width modulation (PWM)\u003c\/li\u003e\n\u003cli\u003eHard sync input\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModule type: analog voltage-controlled oscillator (VCO)\u003c\/li\u003e\n\u003cli\u003ePanel width: 6 HP\u003c\/li\u003e\n\u003cli\u003ePanel height: 3 U\u003c\/li\u003e\n\u003cli\u003eModule depth: 25 mm\u003c\/li\u003e\n\u003cli\u003eDimensions: 128.5 x 30.3 x 25 mm\u003c\/li\u003e\n\u003cli\u003eMass: 111 g\u003c\/li\u003e\n\u003cli\u003ePower connector: 16-pin\u003c\/li\u003e\n\u003cli\u003eCurrent draw +12V: 26 mA\u003c\/li\u003e\n\u003cli\u003eCurrent draw -12V: 23 mA\u003c\/li\u003e\n\u003cli\u003eCurrent draw +5V: 0 mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Morphor","offers":[{"title":"Default Title","offer_id":54206551327057,"sku":"60562","price":129.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/MorphorVCO-Analogue.jpg?v=1783854202"}],"url":"https:\/\/wrdtunes.com\/de-fr\/collections\/morphor.oembed","provider":"Wired Tunes","version":"1.0","type":"link"}