{"title":"Subwoofers","description":"\u003cp\u003eA studio subwoofer is an essential addition to any monitoring system for producers and engineers working with electronic music, film sound or immersive formats like Dolby Atmos. It extends the frequency range of your monitors into the lowest octaves and allows you to make confident mixing decisions across the full audio spectrum.\u003c\/p\u003e","products":[{"product_id":"adam-t10s","title":"ADAM T10S - 10 inch Active Studio Subwoofer","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eADAM Audio T10S\u003c\/strong\u003e – Compact active subwoofer with down-firing 10″ woofer, 130 W Class-D amplifier, 28 Hz–120 Hz frequency response, adjustable crossover, and XLR\/RCA I\/O.\u003c\/p\u003e\n\u003cp\u003eThe ADAM Audio T10S extends the low-end of any nearfield studio monitor, engineered to complement T Series speakers such as the T5V and T7V. Its down-firing 10″ paper-cone driver paired with a 130 W PWM amplifier delivers deep, precise bass down to 28 Hz. An internal two-channel crossover (80 Hz\/120 Hz\/bypass) and phase-inversion switch allow seamless integration and room calibration, while four rubber isolation feet and a rear bass-reflex port optimize acoustic performance in compact studio environments.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDown-firing 10″ paper-cone woofer\u003c\/li\u003e\n\u003cli\u003e130 W RMS Class-D (PWM) amplification\u003c\/li\u003e\n\u003cli\u003eFrequency response: 28 Hz – 120 Hz (–6 dB)\u003c\/li\u003e\n\u003cli\u003eMax SPL at 1 m: ≥104 dB\u003c\/li\u003e\n\u003cli\u003eAdjustable two-channel crossover (80 Hz \/ 120 Hz \/ bypass)\u003c\/li\u003e\n\u003cli\u003ePhase inversion switch (0° \/ 180°)\u003c\/li\u003e\n\u003cli\u003eAnalog inputs \u0026amp; outputs: XLR and RCA\u003c\/li\u003e\n\u003cli\u003eCompact cabinet with rear bass-reflex port\u003c\/li\u003e\n\u003cli\u003eFour high-grade rubber isolation feet\u003c\/li\u003e\n\u003cli\u003eOptimized to match ADAM T Series monitors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: 10″ (260 mm) paper cone\u003c\/li\u003e\n\u003cli\u003eVoice coil diameter: 1.5″ (38 mm)\u003c\/li\u003e\n\u003cli\u003eAmplifier type: PWM Class-D\u003c\/li\u003e\n\u003cli\u003eAmplifier power RMS: 130 W\u003c\/li\u003e\n\u003cli\u003eFrequency response: 28 Hz – 120 Hz (–6 dB)\u003c\/li\u003e\n\u003cli\u003eMax SPL (hemisphere) at 1 m: ≥104 dB\u003c\/li\u003e\n\u003cli\u003eCrossover frequencies: 80 Hz \/ 120 Hz \/ bypass\u003c\/li\u003e\n\u003cli\u003ePhase inversion: 0° \/ 180°\u003c\/li\u003e\n\u003cli\u003eInputs: XLR \u0026amp; RCA\u003c\/li\u003e\n\u003cli\u003eOutputs: XLR \u0026amp; RCA\u003c\/li\u003e\n\u003cli\u003eInput sensitivity: +4 dBu \/ –10 dBV\u003c\/li\u003e\n\u003cli\u003ePower consumption: 190 W\u003c\/li\u003e\n\u003cli\u003eStandby mode: Yes (activates after 15 min no signal)\u003c\/li\u003e\n\u003cli\u003eBypass control: Footswitch (not included)\u003c\/li\u003e\n\u003cli\u003eDimensions (H×W×D): 390 × 318 × 413 mm (15.4″ × 12.5″ × 16.25″)\u003c\/li\u003e\n\u003cli\u003eWeight: 12.2 kg (27 lb)\u003c\/li\u003e\n\u003cli\u003eDelivery contents: Power cord, Quick Start Guide, Welcome Card\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ADAM","offers":[{"title":"Default Title","offer_id":46825262219601,"sku":"47221","price":371.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/ADAMT10S1.jpg?v=1749556540"},{"product_id":"focal-sub-one","title":"Focal SUB ONE - Dual 8 inch Active Studio Subwoofer","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eFocal Sub One\u003c\/strong\u003e is a dual 8-inch active studio subwoofer powered by 200 watts of Class D bi-amplification. Designed to provide flat tonal balance, deep low-end extension, and high SPL up to 114 dB, it perfectly complements 2.1 monitoring systems in modern production environments.\u003c\/p\u003e\n\u003cp\u003eAt the core of the Sub One are handcrafted Slatefiber cone woofers from Focal’s Saint-Étienne facility, which significantly improve dynamic range, low-frequency extension, and impact compared to previous models. Fully adjustable lowpass crossover, volume, phase polarity, and more offer full flexibility for seamless integration into any studio.\u003c\/p\u003e\n\u003cp\u003eFeaturing LFE, left and right inputs and outputs, and a 2.1 low-frequency management system, the Sub One ensures optimal satellite return and easy connection. Its front-ported MDF enclosure with a dark gray vinyl wrap provides durability and excellent acoustic performance. A protective grille is included to safeguard the drivers.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual 8\" Slatefiber cone active subwoofer\u003c\/li\u003e\n\u003cli\u003eFrequency response: 32 Hz – 120 Hz (±3 dB)\u003c\/li\u003e\n\u003cli\u003eMaximum SPL: 114 dB peak @ 1 m\u003c\/li\u003e\n\u003cli\u003eClass D amplifier with 2 x 100 W power\u003c\/li\u003e\n\u003cli\u003eFully adjustable lowpass filter, volume, phase, and polarity\u003c\/li\u003e\n\u003cli\u003eInputs: 2 x XLR, 1 x XLR (LFE), 1 x 1\/4\" (2.1 bypass in)\u003c\/li\u003e\n\u003cli\u003eOutputs: 2 x XLR, 1 x XLR (LFE), 1 x 1\/4\" (2.1 bypass out)\u003c\/li\u003e\n\u003cli\u003e2.1 low-frequency management system for optimal satellite return\u003c\/li\u003e\n\u003cli\u003eFront-ported bass reflex enclosure\u003c\/li\u003e\n\u003cli\u003eMDF cabinet with dark gray vinyl wrap\u003c\/li\u003e\n\u003cli\u003eProtective grille included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: active dual subwoofer\u003c\/li\u003e\n\u003cli\u003eSpeaker size: 2 x 8\"\u003c\/li\u003e\n\u003cli\u003eDriver type: Slatefiber cones\u003c\/li\u003e\n\u003cli\u003eTotal power: 200 W RMS (2 x 100 W Class D)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 32 Hz – 120 Hz (±3 dB)\u003c\/li\u003e\n\u003cli\u003eCrossover frequency: 60 Hz or 90 Hz (switchable)\u003c\/li\u003e\n\u003cli\u003eMaximum peak SPL: 114 dB @ 1 m\u003c\/li\u003e\n\u003cli\u003eInput types: 2 x XLR, 1 x XLR (LFE), 1 x 1\/4\" (2.1 bypass in)\u003c\/li\u003e\n\u003cli\u003eOutput types: 2 x XLR, 1 x XLR (LFE), 1 x 1\/4\" (2.1 bypass out)\u003c\/li\u003e\n\u003cli\u003eFeatures: low pass filter, phase adjustment, polarity inverter, auto standby mode\u003c\/li\u003e\n\u003cli\u003eEnclosure type: front ported bass reflex\u003c\/li\u003e\n\u003cli\u003eEnclosure material: 7\/8\" (22 mm) MDF with dark gray vinyl wrap\u003c\/li\u003e\n\u003cli\u003eDimensions (HxWxD): 299 x 299 x 502 mm (18.75\" x 11.75\" x 19.75\")\u003c\/li\u003e\n\u003cli\u003eWeight: 18.5 kg (40.8 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCAL","offers":[{"title":"Default Title","offer_id":46825346957649,"sku":"47061","price":639.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocalSUBONE1.jpg?v=1750176592"},{"product_id":"genelec-7050cpm-subwoofer-7050c-black","title":"Genelec 7050C Black - 8 inch Active Studio Subwoofer","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eGenelec 7050C (Black)\u003c\/strong\u003e – Compact active studio subwoofer with 130 W Class D amplification, Laminar Spiral Enclosure™ for extended low-end, integrated bass management, and 103 dB SPL.\u003c\/p\u003e\n\u003cp\u003eThe Genelec 7050C delivers tight, accurate bass down to 24 Hz (–6 dB) in a small footprint. Its 205 mm magnetically shielded driver sits in a laminar spiral enclosure (LSE™) for minimal distortion, while rear-panel bass management (85 Hz filters, +10 dB LFE) and DIP switches (phase, LF roll-off, ISS™) let you tailor performance. With five stereo XLR inputs plus an LFE input and five XLR outputs, it excels in stereo or multichannel setups.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e130 W Class D bass amplifier\u003c\/li\u003e\n\u003cli\u003eFrequency response: 24 Hz – 85 Hz (–6 dB)\u003c\/li\u003e\n\u003cli\u003eMaximum short-term SPL: ≥ 103 dB @ 1 m\u003c\/li\u003e\n\u003cli\u003eLaminar Spiral Enclosure™ (LSE™) for low distortion\u003c\/li\u003e\n\u003cli\u003eIntegrated bass management with 85 Hz stereo filters \u0026amp; 120 Hz LFE input\u003c\/li\u003e\n\u003cli\u003eRoom Response Compensation via rear-panel DIP switches\u003c\/li\u003e\n\u003cli\u003eIntelligent Signal Sensing (ISS™) power-save mode\u003c\/li\u003e\n\u003cli\u003eSix XLR analog inputs (5 stereo + 1 LFE) and five XLR outputs\u003c\/li\u003e\n\u003cli\u003eMDF reflex port enclosure for extended LF output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: 205 mm (8 1\/8″) magnetically shielded bass cone\u003c\/li\u003e\n\u003cli\u003eAmplifier power: 130 W RMS\u003c\/li\u003e\n\u003cli\u003eDimensions (H×W×D): 410 × 350 × 319 mm (16 1\/8″ × 13 3\/4″ × 12 1\/2″)\u003c\/li\u003e\n\u003cli\u003eWeight: 17.3 kg (38.1 lb)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 24 Hz – 85 Hz (–6 dB)\u003c\/li\u003e\n\u003cli\u003eSPL: ≥ 103 dB short-term @ 1 m\u003c\/li\u003e\n\u003cli\u003eSelf-generated noise: ≤ 5 dB SPL @ 1 m (A-weighted)\u003c\/li\u003e\n\u003cli\u003eInputs: 5× XLR stereo inputs, 1× XLR LFE input (10 kΩ balanced)\u003c\/li\u003e\n\u003cli\u003eOutputs: 5× XLR stereo outputs\u003c\/li\u003e\n\u003cli\u003ePower consumption: ISS active ≤ 0.5 W; idle ≤ 11 W; full output 150 W\u003c\/li\u003e\n\u003cli\u003eEnclosure: MDF, reflex-ported\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GENELEC","offers":[{"title":"Default Title","offer_id":46825350365521,"sku":"40172","price":1032.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/GENELEC7050CPMSubwoofer7050Cblack1.jpg?v=1750069146"},{"product_id":"neumann-kh-750-aes67","title":"Neumann KH 750 AES67 - 10 inch Active DSP Studio Subwoofer","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNeumann KH 750 AES67 \u003c\/strong\u003e– compact DSP-controlled subwoofer with redundant Audio-over-IP (AoIP) integration, 10” ELFF™ driver, 256 W power, and full network control.\u003c\/p\u003e\n\u003cp\u003eThe Neumann KH 750 AES67 is a high-performance compact subwoofer designed for seamless integration into AES67-compliant IP-based studio networks. Featuring a 10” long-throw driver with ELFF™ technology and a powerful 256 W amplifier, it offers extended bass response, tight transient reproduction, and DSP-based alignment capabilities for all connected KH line monitors. With redundant AES67 ST2110 support and analog\/digital inputs, the KH 750 AES67 is perfect for use in professional music, broadcast, and post-production environments. It supports Neumann’s MA 1 room calibration system and provides network control via Neumann.Control software.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRedundant AES67 network integration compliant with ST2110 and ST2022-7\u003c\/li\u003e\n\u003cli\u003e10” long-throw driver with Extremely Linear Force Factor™ (ELFF™)\u003c\/li\u003e\n\u003cli\u003e256 W amplifier with soft clip, thermal and excursion limiters\u003c\/li\u003e\n\u003cli\u003e4 routing modes: Stereo 80 Hz, External Bass Management, LFE 120 Hz, LFE full-range\u003c\/li\u003e\n\u003cli\u003eAnalog and digital I\/O: 2 x XLR, AES3, S\/PDIF, BNC\u003c\/li\u003e\n\u003cli\u003eSupports Neumann MA 1 Automatic Monitor Alignment (Mac\/PC)\u003c\/li\u003e\n\u003cli\u003eFully DSP-controlled system with FIR phase correction\u003c\/li\u003e\n\u003cli\u003e8-band parametric EQ and customizable crossover settings via Neumann.Control\u003c\/li\u003e\n\u003cli\u003eLow self-noise (\u0026lt;20 dB(A)) and extended low-frequency response (18–750 Hz ±3 dB)\u003c\/li\u003e\n\u003cli\u003eCompact sealed cabinet with 48.4 L volume and robust grille\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAcoustic principle: Sealed cabinet\u003c\/li\u003e\n\u003cli\u003eWoofer: 265 mm (10\") with protective grille\u003c\/li\u003e\n\u003cli\u003eAmplifier power: 256 W\u003c\/li\u003e\n\u003cli\u003eMax SPL: 105 dB SPL (50–100 Hz, 3% THD)\u003c\/li\u003e\n\u003cli\u003eFrequency response (±3 dB): 18 … 750 Hz\u003c\/li\u003e\n\u003cli\u003eLatency: 1.5 ms (A-D-A), 1.2 ms (D-A)\u003c\/li\u003e\n\u003cli\u003eInputs: 2 x XLR analog, BNC AES3\/S-PDIF, Dual RJ45 AES67\u003c\/li\u003e\n\u003cli\u003eOutputs: 2 x XLR analog, BNC AES3\u003c\/li\u003e\n\u003cli\u003eNetwork control: Neumann.Control via RJ45, SSC protocol over IPv6\u003c\/li\u003e\n\u003cli\u003eInput impedance: \u0026gt;13k Ohms, Max input level: \u0026lt;+24 dBu\u003c\/li\u003e\n\u003cli\u003eSampling rates: 22.05 to 192 kHz (digital), internal 48 kHz\u003c\/li\u003e\n\u003cli\u003eDigital converter resolution: 16–24 bit Δ∑\u003c\/li\u003e\n\u003cli\u003eEqualization: 8-band PEQ, low\/high shelf, FIR correction\u003c\/li\u003e\n\u003cli\u003eEnclosure: Wood + aluminum, painted anthracite\/black\u003c\/li\u003e\n\u003cli\u003eDimensions: 383 x 330 x 383 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 19.5 kg\u003c\/li\u003e\n\u003cli\u003ePower supply: 100–240 V, 50\/60 Hz SMPS\u003c\/li\u003e\n\u003cli\u003ePower consumption: \u0026lt;0.3 W (standby), 410 W (max output)\u003c\/li\u003e\n\u003cli\u003eStandby mode: Configurable via software (default 90 min)\u003c\/li\u003e\n\u003cli\u003eIncluded: Power cable, Getting Started Guide, Operating Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Neumann","offers":[{"title":"Default Title","offer_id":46825407578449,"sku":"51677","price":1880.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/NeumannKH750AES671.jpg?v=1749554954"},{"product_id":"neumann-kh-750-dsp-d-g","title":"Neumann KH 750 DSP D G - 10 inch Active DSP Studio Subwoofer","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eNeumann KH 750 DSP D G –\u003c\/strong\u003e compact DSP-controlled active subwoofer with 10\" driver, advanced room correction via MA 1, and flexible analog\/digital connectivity including AES3 and S\/PDIF.\u003c\/p\u003e\n\u003cp\u003eThe Neumann KH 750 DSP is a compact powerhouse designed for smaller studios and precise low-end monitoring. Equipped with a 10” long-throw ELFF™ woofer in a sealed wooden cabinet, this subwoofer delivers deep, tight bass down to 18 Hz with minimal group delay. The integrated DSP engine enables automatic room alignment using Neumann’s MA 1 system, and provides full control over crossover, EQ, delay, and phase – even for non-DSP Neumann monitors connected via analog outputs.\u003c\/p\u003e\n\u003cp\u003eWith both analog XLR and digital BNC (AES3\/S\/PDIF) inputs and outputs, as well as a network port for Neumann.Control and future updates, the KH 750 DSP integrates easily into stereo and multichannel setups. It supports various bass management modes, up to 113 dB SPL (Dolby DARDT), and offers extensive configuration options via software. Compact, powerful, and highly flexible, it’s a reference-grade subwoofer for modern music, broadcast, and post-production studios.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e10\" long-throw ELFF™ driver with built-in protective grille\u003c\/li\u003e\n\u003cli\u003eSealed cabinet design for fast transient response\u003c\/li\u003e\n\u003cli\u003eDSP-controlled with MA 1 automatic room alignment\u003c\/li\u003e\n\u003cli\u003eSupports stereo, LFE, and bass-managed setups\u003c\/li\u003e\n\u003cli\u003eAnalog (XLR) and digital (BNC AES3\/S\/PDIF) I\/O\u003c\/li\u003e\n\u003cli\u003eFour routing modes: stereo 80 Hz, external, LFE 120 Hz\/full range\u003c\/li\u003e\n\u003cli\u003e8-band parametric EQ, shelving filters, delay, phase and level controls\u003c\/li\u003e\n\u003cli\u003eNetwork controllable via Neumann.Control iPad® app\u003c\/li\u003e\n\u003cli\u003eUniversal power supply (100–240V)\u003c\/li\u003e\n\u003cli\u003eDesigned for use with KH-series monitors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency Response (±3 dB): 18 Hz – 750 Hz\u003c\/li\u003e\n\u003cli\u003eFree-field Max SPL: 105 dB (50–100 Hz @ 3% THD)\u003c\/li\u003e\n\u003cli\u003eMax SPL (Dolby DARDT): 113 dB\u003c\/li\u003e\n\u003cli\u003eDriver: 265 mm (10\") long-throw woofer\u003c\/li\u003e\n\u003cli\u003eAcoustical Principle: Sealed\u003c\/li\u003e\n\u003cli\u003eAmplifier Power: 256 W RMS\u003c\/li\u003e\n\u003cli\u003eInputs: 2x XLR (balanced), 1x BNC AES3\/S\/PDIF\u003c\/li\u003e\n\u003cli\u003eOutputs: 2x XLR (balanced), 1x BNC AES3\u003c\/li\u003e\n\u003cli\u003eDigital Resolution: 16–24 bit, up to 192 kHz\u003c\/li\u003e\n\u003cli\u003eLatency: 1.5 ms (A-D-A), 1.2 ms (D-A only)\u003c\/li\u003e\n\u003cli\u003eNetwork Control: RJ45 (Neumann.Control \u0026amp; MA 1)\u003c\/li\u003e\n\u003cli\u003ePower Supply: 100–240V AC, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eCabinet Dimensions: 383 x 330 x 383 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 19.5 kg\u003c\/li\u003e\n\u003cli\u003eIncluded: Power cable, quick start guide, operating manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Neumann","offers":[{"title":"Default Title","offer_id":46825407840593,"sku":"22227","price":1737.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/NeumannKH750DSPDG1.jpg?v=1749554907"},{"product_id":"pmc-8-sub","title":"PMC 8 SUB - 8 inch Active Studio Subwoofer","description":"\u003cp\u003e\u003cb\u003ePMC 8 SUB\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eThe\u003cb\u003ePMC 8 SUB\u003c\/b\u003e is one of the most powerful tools you can find in an audiophile set-up. It is a subwoofer that is capable of stirring the listener's emotions and squeezing the true richness out of music. Its body is made of the highest quality materials, which ensures not only an elegant appearance, but also excellent vibration damping. As a result, the sound it generates is free of unwanted distortion and the bass sounds fuller and more decisive.\u003c\/p\u003e\u003cp\u003eThe\u003cb\u003ePMC 8 SUB\u003c\/b\u003e is a subwoofer that uses a specially designed 8\" bass driver to deliver incredible sound power and precision. Combined with advanced electronics and acoustic parameter control, this subwoofer is able to deliver deep bass that gives the impression that the music is truly 'alive'. Its extraordinarily wide frequency range makes it a subwoofer that is perfect for any application - from listening to music at home to amplifying larger rooms.\u003c\/p\u003e\u003cp\u003eThe\u003cb\u003ePMC 8 SUB\u003c\/b\u003e also offers a multitude of adjustment and sound customisation options to suit your individual needs and preferences. The interior of this subwoofer hides advanced technology to deliver excellent sound quality. The \u003cb\u003ePMC 8 \u003c\/b\u003eSUB is undoubtedly a subwoofer that will satisfy even the most demanding music lovers and professionals.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eADDITIONAL SPECIFICATIONS\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eType: active subwoofer\u003c\/li\u003e\n\u003cli\u003eBass speaker: 8 inches\u003c\/li\u003e\n\u003cli\u003eOutput power: 200 W RMS, 350 W peak\u003c\/li\u003e\n\u003cli\u003eFrequency range: 25Hz - 500Hz (- 3dB)\u003c\/li\u003e\n\u003cli\u003eCut-off frequency adjustment: 50Hz - 250Hz (variable-pass control)\u003c\/li\u003e\n\u003cli\u003ePhase adjustment: 0 - 180 degrees\u003c\/li\u003e\n\u003cli\u003eInput signal: XLR (balanced), RCA (unbalanced)\u003c\/li\u003e\n\u003cli\u003eSignal output: XLR (balanced)\u003c\/li\u003e\n\u003cli\u003eDimensions (W x H x D): 360 mm x 330 mm x 375 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 21 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003c\/p\u003e","brand":"PMC","offers":[{"title":"Default Title","offer_id":46825443295569,"sku":"50905","price":3476.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/PMC8SUB1_9224491f-35d7-4270-85f1-00b879e01839.jpg?v=1749999744"},{"product_id":"pmc-8-2-sub-l","title":"PMC 8-2 SUB-L - Active Studio Subwoofer, Dual 8 inch Woofer","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003ePMC 8-2 SUB-L\u003c\/strong\u003e — active subwoofer with twin 8-inch bass drivers and ATL™ bass-loading, delivering high headroom and ultra-precise low-end down to 25Hz. Built on the same DSP platform as the PMC8 SUB, it offers increased SPL and deeper extension, making it ideal for immersive and multi-channel systems. With dual 400W Class-D amplifiers and a 3-meter ATL™, it can be used as a standalone sub or as an XBD extension with PMC6-2 or PMC8-2 systems for massive power and range.\u003c\/p\u003e\n\u003cp\u003eThe PMC 8-2 SUB is available in both left- and right-oriented cabinets (PMC8-2 SUB-L or PMC8-2 SUB-R), allowing for ideal placement of bass drivers on the outer edges of stereo setups. Full configuration is available either via rear-panel controls or over the network using the SoundAlign™ browser-based interface. With advanced tuning capabilities, transparent response, and robust integration features, the 8-2 SUB-L is a professional solution for powerful, clean bass in any reference-grade monitoring system.\u003c\/p\u003e\n\u003ch4\u003eKEY FEATURES\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eActive subwoofer with twin 8” long-throw drivers and ATL™\u003c\/li\u003e\n\u003cli\u003eBuilt-in DSP with LAN control via SoundAlign™\u003c\/li\u003e\n\u003cli\u003eFrequency range from 25Hz to 500Hz\u003c\/li\u003e\n\u003cli\u003eMax SPL: 121dB @ 1m\u003c\/li\u003e\n\u003cli\u003e2 x 400W Class-D amplifiers\u003c\/li\u003e\n\u003cli\u003eSwitchable analogue and AES3 digital XLR input\u003c\/li\u003e\n\u003cli\u003eHP\/LP filters, phase, delay, parametric EQ, and user presets\u003c\/li\u003e\n\u003cli\u003eAvailable as left- or right-handed cabinet version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTECHNICAL SPECIFICATIONS\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eType: Active subwoofer with twin 8-inch bass drivers and ATL™\u003c\/li\u003e\n\u003cli\u003eDrive Units: LF – 2 x 200mm (8”) PMC studio 8 drivers\u003c\/li\u003e\n\u003cli\u003eEffective ATL™ Length: 3m (9.8ft)\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 25Hz – 500Hz (-3dB)\u003c\/li\u003e\n\u003cli\u003eSensitivity: +4dBu input = 98dB SPL @ 1m\u003c\/li\u003e\n\u003cli\u003eMax Continuous SPL: 115dB @ 1m\u003c\/li\u003e\n\u003cli\u003eMax Peak SPL: 121dB @ 1m\u003c\/li\u003e\n\u003cli\u003eInputs:\n\u003cul\u003e\n\u003cli\u003eXLR (switchable between analog \u0026amp; AES3 digital)\u003c\/li\u003e\n\u003cli\u003eAnalog: +20\/+24dBu max input level, 22kΩ impedance\u003c\/li\u003e\n\u003cli\u003eDigital: 16\/24-bit AES3, 18–192kHz sample rate, 110Ω impedance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eOutput: XLR digital AES3 (24-bit @ 96kHz fixed)\u003c\/li\u003e\n\u003cli\u003eNetwork: RJ45 for SoundAlign web interface\u003c\/li\u003e\n\u003cli\u003eDSP Features:\n\u003cul\u003e\n\u003cli\u003eLevel Trim: ±10dB\u003c\/li\u003e\n\u003cli\u003eHigh-pass\/Low-pass filter: 20–200Hz, 12dB\/Oct\u003c\/li\u003e\n\u003cli\u003eDelay: 0–30ms\u003c\/li\u003e\n\u003cli\u003ePhase: Normal or Inverted\u003c\/li\u003e\n\u003cli\u003eLF \u0026amp; HF Shelving EQ: 20Hz–20kHz, ±10dB, Q 0.707\u003c\/li\u003e\n\u003cli\u003e5-band parametric EQ: 20Hz–20kHz, ±10dB\u003c\/li\u003e\n\u003cli\u003eUser Presets: 3 user + factory defaults\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLatency: 2.4ms\u003c\/li\u003e\n\u003cli\u003eAmplifier Power: 2 x 400Wrms\u003c\/li\u003e\n\u003cli\u003ePower Supply: 100–240VAC auto-switching, 50–60Hz (IEC C14)\u003c\/li\u003e\n\u003cli\u003ePower Consumption: Idle 25W \/ Max 300W\u003c\/li\u003e\n\u003cli\u003eCabinet Dimensions (H x W x D): 266 x 551 x 440 mm (10.5” x 21.7” x 17.3”)\u003c\/li\u003e\n\u003cli\u003eWeight: 18.5kg (40.8lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"PMC","offers":[{"title":"Default Title","offer_id":46825443688785,"sku":"50898","price":5729.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/PMC8-2SUB-L1_c7d8e37f-3787-4a89-8553-0e3b7344d819.jpg?v=1749999780"},{"product_id":"pmc-8-2-sub-r","title":"PMC 8-2 SUB-R - Active Studio Subwoofer, Dual 8 inch Woofer","description":"\u003cdiv\u003e\n  \u003cp\u003e\u003cstrong\u003ePMC 8-2 SUB-R\u003c\/strong\u003e – Active subwoofer with twin 8″ PMC studio LF drivers, 2×400 W Class-D amplification, ATL™ bass loading, DSP control with SoundAlign™ web interface, and left-hand cabinet version.\u003c\/p\u003e\n  \u003cp\u003eThe PMC 8-2 SUB-R delivers deep, powerful bass down to 25 Hz with precision and low distortion. Its twin 200 mm (8″) drivers each run on dedicated 400 W Class-D amps and sit in a 3 m effective ATL™ transmission line. Seamless integration with PMC 6-2 or 8-2 monitors is possible via XBD configuration, or use it standalone in multichannel and immersive systems. DSP functions—including HP\/LP filters, shelving \u0026amp; parametric EQ, delay, phase invert, and level trim—are accessed on the rear panel or via the LAN-based SoundAlign™ interface. The left-handed cabinet positions drivers on the outer edge of a stereo array for optimal stereo imaging.\u003c\/p\u003e\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eTwin 200 mm (8″) PMC studio low-frequency drivers\u003c\/li\u003e\n    \u003cli\u003e2×400 W RMS Class-D amplification\u003c\/li\u003e\n    \u003cli\u003eATL™ bass-loading technology (3 m effective length)\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 25 Hz – 500 Hz (–3 dB)\u003c\/li\u003e\n    \u003cli\u003eMax continuous SPL: 115 dB @1 m; Peak SPL: 121 dB @1 m\u003c\/li\u003e\n    \u003cli\u003eXLR inputs, switchable analog (+20\/+24 dBu, 22 kΩ) or AES3 digital (16\/24 bit, 18–192 kHz, 110 Ω)\u003c\/li\u003e\n    \u003cli\u003eXLR AES3 digital output (24-bit @ 96 kHz)\u003c\/li\u003e\n    \u003cli\u003eSoundAlign™ web interface via RJ45\u003c\/li\u003e\n    \u003cli\u003eOn-board DSP: HP\/LP filters (20–200 Hz), ±10 dB level trim, 0–30 ms delay, phase invert, shelving filters, 5-band parametric EQ, 3 user presets\u003c\/li\u003e\n    \u003cli\u003eLatency: 2.4 ms\u003c\/li\u003e\n    \u003cli\u003eExpansion card slot for future upgrades\u003c\/li\u003e\n  \u003c\/ul\u003e\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: Active subwoofer with twin 8″ drivers \u0026amp; ATL™ bass loading\u003c\/li\u003e\n    \u003cli\u003eDrive units: 2×200 mm (8″) PMC studio drivers\u003c\/li\u003e\n    \u003cli\u003eEffective ATL™ length: 3 m (9.8 ft)\u003c\/li\u003e\n    \u003cli\u003eSensitivity: +4 dBu = 98 dB SPL @1 m\u003c\/li\u003e\n    \u003cli\u003eMax continuous SPL: 115 dB @1 m (quarter space)\u003c\/li\u003e\n    \u003cli\u003eMax peak SPL: 121 dB @1 m (quarter space)\u003c\/li\u003e\n    \u003cli\u003eInputs: XLR analog \u0026amp; AES3 digital (switchable)\u003c\/li\u003e\n    \u003cli\u003eInput impedance: 22 kΩ (analog), 110 Ω (digital)\u003c\/li\u003e\n    \u003cli\u003eOutput: XLR AES3 digital (24-bit @ 96 kHz)\u003c\/li\u003e\n    \u003cli\u003eAmplifier power: 300 W RMS per driver channel\u003c\/li\u003e\n    \u003cli\u003ePower consumption: 25 W idle, 300 W max\u003c\/li\u003e\n    \u003cli\u003eMains: 100–240 VAC auto-switching, 50–60 Hz (IEC C14)\u003c\/li\u003e\n    \u003cli\u003eCabinet dimensions (H×W×D): 266 × 551 × 440 mm (10.5″ × 21.7″ × 17.3″)\u003c\/li\u003e\n    \u003cli\u003eWeight: 18.5 kg (40.8 lbs) each\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"PMC","offers":[{"title":"Default Title","offer_id":46825443819857,"sku":"50925","price":5729.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/PMC8-2SUB-R1.jpg?v=1749556759"},{"product_id":"pmc-ci140sub","title":"PMC ci140sub - Passive Installation Subwoofer","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003ePMC Ci140sub\u003c\/strong\u003e – Dedicated on-wall subwoofer with four 133 mm Natural Fibre LTx™ drivers, ATL™ bass-loading, precision magnetic grille, and immersive monitoring performance.\u003c\/p\u003e\n\u003cp\u003eThe PMC Ci140sub is the perfect complement to the Ci140 in immersive and on-wall studio installations. Utilizing the same four 133 mm bass drivers and Advanced Transmission Line (ATL™) technology, it extends low-frequency energy down to 32 Hz (–3 dB) for a seamless, high-resolution bass response. The supplied interlocking on-wall bracket enables precise level adjustment, while the bezel-less, magnetic grille (white silk standard, black silk optional) delivers a sleek, installer-friendly aesthetic.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFour 133 mm Natural Fibre LTx™ bass drivers\u003c\/li\u003e\n\u003cli\u003eAdvanced Transmission Line (ATL™) bass-loading\u003c\/li\u003e\n\u003cli\u003eFrequency response: 32 Hz (–3 dB) \/ 29 Hz (–6 dB)\u003c\/li\u003e\n\u003cli\u003eSensitivity: 93 dB (2.83 V @ 1 m)\u003c\/li\u003e\n\u003cli\u003eOn-wall mounting with interlocking bracket and micro-level adjustment\u003c\/li\u003e\n\u003cli\u003eBezel-less, precision-perforated magnetic grille (white silk; black silk optional)\u003c\/li\u003e\n\u003cli\u003eIdeal for stereo, LCR, and immersive formats\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDrive units: 4×133 mm (5.25″) Natural Fibre LTx™\u003c\/li\u003e\n\u003cli\u003eEffective ATL™ length: 2.3 m (7.5 ft)\u003c\/li\u003e\n\u003cli\u003eImpedance: 4 Ω\u003c\/li\u003e\n\u003cli\u003eInput connectors: 1 pair 4 mm sockets\u003c\/li\u003e\n\u003cli\u003eDimensions (H×W×D): 1400 × 300 × 153 mm (55″ × 11.8″ × 6″)\u003c\/li\u003e\n\u003cli\u003eWeight:\n\u003cul\u003e\n\u003cli\u003eBoxed: 32 kg\u003c\/li\u003e\n\u003cli\u003eUnboxed (with grille): 25.5 kg\u003c\/li\u003e\n\u003cli\u003eWithout grille: 23.5 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"PMC","offers":[{"title":"Default Title","offer_id":46825444606289,"sku":"50924","price":3556.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/PMCci140sub.jpg?v=1749556802"},{"product_id":"focal-sub-6-be","title":"Focal Sub 6 be - 11 inch Active Studio Subwoofer","description":"\u003cdiv\u003e\n\u003cstrong\u003eFocal Solo6 Be \u003c\/strong\u003e– 2-way nearfield active studio monitor with W-cone woofer and beryllium tweeter.\n\u003cp\u003e\u003cstrong\u003eFocal Solo6 Be\u003c\/strong\u003e is a professional active nearfield monitor designed for accurate mixing and mastering. Equipped with a 6.5\" W-cone composite woofer and an inverted beryllium dome tweeter, it delivers a highly transparent, neutral frequency response with exceptional dynamics and low distortion. The large front laminar bass port ensures clean and controlled low-end performance, while its compact MDF cabinet makes it ideal for studios with limited space.\u003c\/p\u003e\n\u003cp\u003eThe rear panel offers extensive adjustment options including input sensitivity, LF and HF shelving, and midrange EQ to adapt to any acoustic environment. With a total of 250 W amplification power (150 W for low\/mid and 100 W for high), the Solo6 Be provides impressive SPL up to 113 dB. The elegant dark red wood veneer side panels and rigid MDF construction emphasize its premium build quality.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1.5\" beryllium inverted dome tweeter for wide dispersion and unmatched clarity\u003c\/li\u003e\n\u003cli\u003e6.5\" W-cone woofer for accurate and distortion-free bass and mids\u003c\/li\u003e\n\u003cli\u003eFront-facing large laminar port for clean and focused low-end response\u003c\/li\u003e\n\u003cli\u003eAdjustable input sensitivity and EQ for acoustic optimization\u003c\/li\u003e\n\u003cli\u003eMagnetically shielded design for interference-free operation\u003c\/li\u003e\n\u003cli\u003eRobust 19 mm MDF cabinet with natural dark red wood side panels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: 2-way active nearfield studio monitor\u003c\/li\u003e\n\u003cli\u003eAmplification: 150 W (LF\/MF), 100 W (HF)\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 40 Hz – 40 kHz\u003c\/li\u003e\n\u003cli\u003eMax SPL: 113 dB (peak @ 1 m)\u003c\/li\u003e\n\u003cli\u003eWoofer: 6.5\" W-cone composite sandwich\u003c\/li\u003e\n\u003cli\u003eTweeter: 1.5\" beryllium inverted dome\u003c\/li\u003e\n\u003cli\u003eInputs: Balanced 3-pin XLR, 10 kOhm input impedance\u003c\/li\u003e\n\u003cli\u003eInput Sensitivity: +4 dBu or -10 dBV (switchable)\u003c\/li\u003e\n\u003cli\u003eCabinet: 19 mm MDF with dark red wood veneer side panels\u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x D): 330 x 240 x 290 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 11 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCAL","offers":[{"title":"Default Title","offer_id":47302798278993,"sku":"10088","price":5600.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FocalSub6be1.jpg?v=1749466890"},{"product_id":"genelec-7350apm-subwoofer-sam-7350a-black","title":"Genelec 7350A Black - 8 inch SAM Active Studio Subwoofer","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eGENELEC 7350A SAM™\u003c\/strong\u003e – compact 8\" active studio subwoofer with 150 W Class-D amplifier, advanced DSP, and Genelec's LSE™ enclosure. Frequency response: 25–120 Hz, max SPL: 104 dB. Designed for precision low-frequency monitoring in professional environments.\u003c\/p\u003e\n\u003cp\u003eThe GENELEC 7350A SAM™ is a high-precision studio subwoofer developed as part of Genelec's Smart Active Monitoring series. Equipped with an 8-inch woofer and a 150 W Class-D amplifier, it delivers tight and controlled low-frequency performance down to 25 Hz. The subwoofer is specifically tailored to complement compact studio monitors like the Genelec 8320 and 8330 but integrates equally well with both analog and digital systems via 11 XLR I\/O and AES\/EBU connectivity.\u003c\/p\u003e\n\u003cp\u003eThe proprietary Laminar Spiral Enclosure (LSE™) ensures resonance-free bass response even at high SPL, while the compact housing makes it ideal for smaller control rooms, broadcast studios, and editing suites. With Smart Active Monitoring (SAM™) technology, the 7350A adapts to its acoustic environment using GLM™ (Genelec Loudspeaker Manager), accessible via dual RJ45 ports for room calibration and group alignment.\u003c\/p\u003e\n\u003cp\u003eOther features include ISS™ (Intelligent Signal Sensing) for energy-saving automatic standby, and extensive mounting options for versatile studio placement. The unit’s build quality and intelligent DSP integration make it a reliable choice for demanding monitoring setups.\u003c\/p\u003e\n\u003ch6\u003eKEY FEATURES\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003e8\" active subwoofer with Smart Active Monitoring (SAM™)\u003c\/li\u003e\n\u003cli\u003eLaminar Spiral Enclosure (LSE™) for distortion-free bass\u003c\/li\u003e\n\u003cli\u003e150 W Class-D amplifier with 25–120 Hz response\u003c\/li\u003e\n\u003cli\u003eGLM™ network connectivity via dual RJ45 ports\u003c\/li\u003e\n\u003cli\u003eIntelligent Signal Sensing (ISS™) for energy-saving operation\u003c\/li\u003e\n\u003cli\u003e11 analog XLR I\/O, AES\/EBU digital I\/O, GLM control ports\u003c\/li\u003e\n\u003cli\u003eMax SPL: 104 dB @ 1 m\u003c\/li\u003e\n\u003cli\u003eCompact, rugged housing for tight studio spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch6\u003eTECHNICAL SPECIFICATIONS\u003c\/h6\u003e\n\u003cul\u003e\n\u003cli\u003eWoofer size: 8\" (205 mm)\u003c\/li\u003e\n\u003cli\u003eAmplifier power: 150 W RMS (Class D)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 25 Hz – 120 Hz (±3 dB)\u003c\/li\u003e\n\u003cli\u003eMaximum SPL: 104 dB @ 1 m\u003c\/li\u003e\n\u003cli\u003eInput impedance: 10 Ohm\u003c\/li\u003e\n\u003cli\u003eInputs\/Outputs: 11 x XLR (analog), 2 x XLR AES\/EBU, 2 x RJ45 (GLM)\u003c\/li\u003e\n\u003cli\u003ePower consumption: \u0026lt; 0.5 W (ISS), 8.5 W (idle), 150 W (max)\u003c\/li\u003e\n\u003cli\u003eEnclosure type: Bass reflex with side port\u003c\/li\u003e\n\u003cli\u003eDimensions (H x W x D): 410 x 350 x 319 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 18 kg\u003c\/li\u003e\n\u003cli\u003eColor: Dark grey\u003c\/li\u003e\n\u003cli\u003eMade in Finland\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GENELEC","offers":[{"title":"Default Title","offer_id":47387767865681,"sku":"40199","price":1222.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/GENELEC7350APMSubwooferSAM7350Ablack1.jpg?v=1749466800"},{"product_id":"adam-sub15","title":"ADAM Sub15 - 15 inch Active Studio Subwoofer","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003eADAM Audio Sub15\u003c\/strong\u003e — high-performance passive subwoofer with a 15-inch aluminum driver, 1000 W RMS PWM amplifier, frequency response from 20 Hz to 150 Hz, and a maximum SPL of 120 dB for precise low-end monitoring in mid-to-large control rooms.\u003c\/p\u003e\n\u003cp\u003eThe ADAM Sub15 is designed to extend the low-frequency range of your main and midfield monitors with extreme precision and power. It features a robust 15.5-inch aluminum cone woofer driven by a large 100 mm voice coil and dual magnets. The 1000 W RMS \/ 1200 W peak PWM amplifier ensures clean and controlled output with nearly 90% efficiency. Thanks to its optimized down-firing bass reflex port with rounded edges, the Sub15 minimizes port noise even at high output levels.\u003c\/p\u003e\n\u003cp\u003eEngineers can fine-tune the subwoofer to their environment with variable crossover settings (50–150 Hz), adjustable volume (-60 dB to +6 dB), and a phase reverse switch to resolve phase issues in stereo or surround setups. Satellite speakers can be used full-range or high-passed at 85 Hz for flexible integration. Input and output connectivity is available via both balanced XLR and unbalanced RCA. The Sub15 delivers tight, musical low frequencies with clarity, making it an ideal reference subwoofer for professional studios.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e15.5″ subwoofer with rigid aluminum cone\u003c\/li\u003e\n\u003cli\u003e100 mm voice coil for precise and dynamic response\u003c\/li\u003e\n\u003cli\u003eClass D (PWM) amplifier with 1000 W RMS \/ 1200 W peak output\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 Hz – 150 Hz\u003c\/li\u003e\n\u003cli\u003eMax SPL: ≥120 dB at 1 meter\u003c\/li\u003e\n\u003cli\u003eDownward-firing bass reflex port with noise-reducing design\u003c\/li\u003e\n\u003cli\u003eContinuously variable crossover: 50 Hz – 150 Hz\u003c\/li\u003e\n\u003cli\u003eSelectable high-pass filter at 85 Hz for satellites\u003c\/li\u003e\n\u003cli\u003ePhase reverse switch for optimal integration\u003c\/li\u003e\n\u003cli\u003eVolume control from -60 dB to +6 dB\u003c\/li\u003e\n\u003cli\u003eBalanced XLR and unbalanced RCA inputs and outputs\u003c\/li\u003e\n\u003cli\u003eSolid cabinet design with rear control panel\u003c\/li\u003e\n\u003cli\u003e5-year warranty with product registration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: 15.5″ aluminum cone\u003c\/li\u003e\n\u003cli\u003eVoice coil diameter: 100 mm (4″)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 Hz – 150 Hz\u003c\/li\u003e\n\u003cli\u003eMax SPL: ≥120 dB @ 1 m\u003c\/li\u003e\n\u003cli\u003eAmplifier type: PWM\u003c\/li\u003e\n\u003cli\u003eAmplifier power RMS \/ Music: 1000 W \/ 1200 W\u003c\/li\u003e\n\u003cli\u003eCrossover frequency: 50 – 150 Hz\u003c\/li\u003e\n\u003cli\u003eInput connectors: XLR (balanced), RCA (unbalanced)\u003c\/li\u003e\n\u003cli\u003eInput impedance: 10 kΩ\u003c\/li\u003e\n\u003cli\u003eTHD \u0026gt; 60 Hz: ≤1%\u003c\/li\u003e\n\u003cli\u003ePanel: Rear\u003c\/li\u003e\n\u003cli\u003eDimensions (H × W × D): 635 × 470 × 525 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 52 kg\u003c\/li\u003e\n\u003cli\u003eIncluded: Power cable, user manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ADAM","offers":[{"title":"Default Title","offer_id":47512802296145,"sku":"10077","price":3100.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/ADAMSub151.jpg?v=1749464674"},{"product_id":"psi-audio-sub-a125-m-studio-red","title":"PSI Audio Sub A125-M Studio Red - Active Studio Subwoofer","description":"\u003cdiv\u003e\n  \u003cp\u003e\u003cstrong\u003ePSI Audio Sub A125-M\u003c\/strong\u003e – a compact, high-precision studio subwoofer featuring an 8.3\" woofer, frequency response from 28 Hz to 90 Hz, a 340 W peak G\/H-class amplifier, and a fully analog signal path with no DSP.\u003c\/p\u003e\n\n  \u003cp\u003e\n    The Sub A125-M is PSI Audio’s most compact subwoofer, delivering exceptional accuracy and control across the low-frequency spectrum. Designed for both LFE applications in surround setups and bass extension in stereo systems, it integrates seamlessly with the entire PSI Audio monitor range. Each unit is individually calibrated in an anechoic chamber to ensure precise frequency and phase response, providing reliable low-end reproduction for mixing, mastering, and critical listening.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Built entirely without DSP and handcrafted in Switzerland, the A125-M offers the brand’s signature fidelity and transparency, now extended into the sub-bass region. Its efficient G\/H-class amplifier ensures power and detail in a compact enclosure that fits any studio layout. This is not just a subwoofer—it's a low-frequency precision monitor that reveals every nuance down to 28 Hz, transforming your monitoring setup into a full-range system with maximum confidence and sonic integrity.\n  \u003c\/p\u003e\n\n  \u003ch6\u003eKEY FEATURES\u003c\/h6\u003e\n  \u003cul\u003e\n    \u003cli\u003e8.3\" low-frequency driver with 210 mm diaphragm\u003c\/li\u003e\n    \u003cli\u003eFrequency range: 28–90 Hz (-6 dB)\u003c\/li\u003e\n    \u003cli\u003ePeak power: 340 W G\/H-class amplifier\u003c\/li\u003e\n    \u003cli\u003eFully analog design with no DSP\u003c\/li\u003e\n    \u003cli\u003eIndividually calibrated in PSI's anechoic chamber\u003c\/li\u003e\n    \u003cli\u003eFlat frequency and phase response\u003c\/li\u003e\n    \u003cli\u003ePerfect extension for A14-M, A17-M, and A21-M monitors\u003c\/li\u003e\n    \u003cli\u003eHandmade in Switzerland with premium craftsmanship\u003c\/li\u003e\n    \u003cli\u003eAvailable in Studio Red, Metal Black, or Pure White\u003c\/li\u003e\n    \u003cli\u003e5+1 year warranty\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch6\u003eTECHNICAL SPECIFICATIONS\u003c\/h6\u003e\n  \u003cul\u003e\n    \u003cli\u003ePeak power: 340 W\u003c\/li\u003e\n    \u003cli\u003eFrequency response (-6 dB): 28–90 Hz\u003c\/li\u003e\n    \u003cli\u003ePeak SPL @1m: 111 dB\u003c\/li\u003e\n    \u003cli\u003eWoofer external diameter: 290 mm (11.4\")\u003c\/li\u003e\n    \u003cli\u003eWoofer diaphragm diameter: 210 mm (8.3\")\u003c\/li\u003e\n    \u003cli\u003eSignal-to-noise ratio: 103 dBA\u003c\/li\u003e\n    \u003cli\u003eSPL tolerance: ±2 dB\u003c\/li\u003e\n    \u003cli\u003ePhase tolerance (300–500 Hz): ±45°\u003c\/li\u003e\n    \u003cli\u003eDimensions (W x H x D): 320 x 480 x 385 mm\u003c\/li\u003e\n    \u003cli\u003eNet weight: 20.5 kg\u003c\/li\u003e\n    \u003cli\u003eConnectors: 2 x XLR inputs, 2 x XLR outputs\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"PSI AUDIO","offers":[{"title":"Default Title","offer_id":48267608949073,"sku":"43473","price":3170.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/PSIAudioSubA125-MStudioRed1.jpg?v=1749463641"},{"product_id":"psi-audio-sub-a125-m-pure-white","title":"PSI Audio Sub A125-M Pure White - Active Studio Subwoofer","description":"\u003cdiv\u003e\n  \u003cp\u003e\u003cstrong\u003ePSI Audio Sub A125-M\u003c\/strong\u003e – a compact, high-precision studio subwoofer featuring an 8.3\" woofer, frequency response from 28 Hz to 90 Hz, a 340 W peak G\/H-class amplifier, and a fully analog signal path with no DSP.\u003c\/p\u003e\n\n  \u003cp\u003e\n    The Sub A125-M is PSI Audio’s most compact subwoofer, delivering exceptional accuracy and control across the low-frequency spectrum. Designed for both LFE applications in surround setups and bass extension in stereo systems, it integrates seamlessly with the entire PSI Audio monitor range. Each unit is individually calibrated in an anechoic chamber to ensure precise frequency and phase response, providing reliable low-end reproduction for mixing, mastering, and critical listening.\n  \u003c\/p\u003e\n\n  \u003cp\u003e\n    Built entirely without DSP and handcrafted in Switzerland, the A125-M offers the brand’s signature fidelity and transparency, now extended into the sub-bass region. Its efficient G\/H-class amplifier ensures power and detail in a compact enclosure that fits any studio layout. This is not just a subwoofer—it's a low-frequency precision monitor that reveals every nuance down to 28 Hz, transforming your monitoring setup into a full-range system with maximum confidence and sonic integrity.\n  \u003c\/p\u003e\n\n  \u003ch6\u003eKEY FEATURES\u003c\/h6\u003e\n  \u003cul\u003e\n    \u003cli\u003e8.3\" low-frequency driver with 210 mm diaphragm\u003c\/li\u003e\n    \u003cli\u003eFrequency range: 28–90 Hz (-6 dB)\u003c\/li\u003e\n    \u003cli\u003ePeak power: 340 W G\/H-class amplifier\u003c\/li\u003e\n    \u003cli\u003eFully analog design with no DSP\u003c\/li\u003e\n    \u003cli\u003eIndividually calibrated in PSI's anechoic chamber\u003c\/li\u003e\n    \u003cli\u003eFlat frequency and phase response\u003c\/li\u003e\n    \u003cli\u003ePerfect extension for A14-M, A17-M, and A21-M monitors\u003c\/li\u003e\n    \u003cli\u003eHandmade in Switzerland with premium craftsmanship\u003c\/li\u003e\n    \u003cli\u003eAvailable in Studio Red, Metal Black, or Pure White\u003c\/li\u003e\n    \u003cli\u003e5+1 year warranty\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch6\u003eTECHNICAL SPECIFICATIONS\u003c\/h6\u003e\n  \u003cul\u003e\n    \u003cli\u003ePeak power: 340 W\u003c\/li\u003e\n    \u003cli\u003eFrequency response (-6 dB): 28–90 Hz\u003c\/li\u003e\n    \u003cli\u003ePeak SPL @1m: 111 dB\u003c\/li\u003e\n    \u003cli\u003eWoofer external diameter: 290 mm (11.4\")\u003c\/li\u003e\n    \u003cli\u003eWoofer diaphragm diameter: 210 mm (8.3\")\u003c\/li\u003e\n    \u003cli\u003eSignal-to-noise ratio: 103 dBA\u003c\/li\u003e\n    \u003cli\u003eSPL tolerance: ±2 dB\u003c\/li\u003e\n    \u003cli\u003ePhase tolerance (300–500 Hz): ±45°\u003c\/li\u003e\n    \u003cli\u003eDimensions (W x H x D): 320 x 480 x 385 mm\u003c\/li\u003e\n    \u003cli\u003eNet weight: 20.5 kg\u003c\/li\u003e\n    \u003cli\u003eConnectors: 2 x XLR inputs, 2 x XLR outputs\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"PSI AUDIO","offers":[{"title":"Default Title","offer_id":48267746738513,"sku":"43475","price":3185.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/PSIAudioSubA125-MPureWhite1.jpg?v=1749463557"},{"product_id":"genelec-7040apm-subwoofer-7040a-black","title":"Genelec 7040A Black - 6.5 inch Powered Studio Subwoofer","description":"\u003cp\u003e\u003cstrong\u003eGENELEC 7040APM\u003c\/strong\u003e is an active studio subwoofer featuring a 6.5-inch driver, a built-in Class D amplifier with 50 watts of power, and a frequency range of 30 – 85 Hz.\u003c\/p\u003e\n\n\u003cp\u003eThe compact active subwoofer \u003cstrong\u003eGenelec 7040A black\u003c\/strong\u003e is designed for use with two-channel audio systems based on the Genelec 8010 or Genelec 8020A active monitors.\u003c\/p\u003e\n\n\u003cp\u003eThe subwoofer is equipped with a shielded low-frequency driver measuring 6.5” (165 mm), housed in a patented Laminar Spiral Enclosure (LSE) cabinet with a bass reflex port. The LSE is a spirally formed metal sheet placed between two panels of MDF. The side vent acts as a bass reflex port, which operates much more efficiently than traditional designs due to its optimal geometry for sound wave passage. Additionally, this cabinet has high rigidity and is practically free from its own resonances. This solution, combined with precise matching of the LF driver and the cabinet, allows this relatively small device to produce low frequencies starting at 30 Hz (at -6 dB level). The built-in amplifier power for this model is 50 watts, with protection against overload, short-circuiting, or overheating of the electronic circuit.\u003c\/p\u003e\n\n\u003cp\u003eThe subwoofer \u003cstrong\u003eGenelec 7040A\u003c\/strong\u003e features balanced XLR inputs and outputs for two channels of the surround sound system. There are also special switches to control the cutoff slope of the input filter and to change the absolute phase of the signal.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eGenelec 7040A\u003c\/strong\u003e is designed for use with Genelec speakers, for which the matching will be most optimal. Since the subwoofer is placed between the surround sound processor and the active satellites, it is equipped with the necessary balanced through outputs. The signal sent to them is unfiltered (fully bandwidth), so the corresponding circuits must be activated in the satellites themselves. This also allows for optimal adjustment of the characteristics of each channel depending on the specifics of the particular system configuration.\u003c\/p\u003e\n\n\u003ch3\u003eGENELEC 7040A Features\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e2 balanced XLR inputs and outputs\u003c\/li\u003e\n    \u003cli\u003e6.5” LF driver\u003c\/li\u003e\n    \u003cli\u003ePhase and cutoff slope switches\u003c\/li\u003e\n    \u003cli\u003eLaminar Spiral Enclosure cabinet technology\u003c\/li\u003e\n    \u003cli\u003eMagnetic shielding\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eGENELEC 7040A Specifications\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003eActive studio subwoofer\u003c\/li\u003e\n    \u003cli\u003eLF driver: 6.5” (165 mm)\u003c\/li\u003e\n    \u003cli\u003eAmplifier: 50 watts\u003c\/li\u003e\n    \u003cli\u003eFrequency range: 30-90 Hz\u003c\/li\u003e\n    \u003cli\u003eInputs: 2 x balanced XLR\u003c\/li\u003e\n    \u003cli\u003eOutputs: 2 x balanced XLR\u003c\/li\u003e\n    \u003cli\u003eSound pressure: 100 dB (peak)\u003c\/li\u003e\n    \u003cli\u003eInput sensitivity: +12 – -6 dB\u003c\/li\u003e\n    \u003cli\u003eInput impedance: 10 kΩ (balanced connection)\u003c\/li\u003e\n    \u003cli\u003eTotal harmonic distortion: \u0026lt;= 0.08%\u003c\/li\u003e\n    \u003cli\u003eAdditional features: adjustable cutoff slope and absolute phase switching\u003c\/li\u003e\n    \u003cli\u003eCabinet design: Laminar Spiral Enclosure\u003c\/li\u003e\n    \u003cli\u003eCabinet material: MDF, metal\u003c\/li\u003e\n    \u003cli\u003eDimensions: 350 x 410 x 205 mm\u003c\/li\u003e\n    \u003cli\u003eWeight: 11.3 kg\u003c\/li\u003e\n    \u003cli\u003eColor: black\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GENELEC","offers":[{"title":"Default Title","offer_id":49886679138641,"sku":"40171","price":773.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/GENELEC7040APMSubwoofer7040Ablack1.jpg?v=1748089922"},{"product_id":"barefoot-microsub-45-pair","title":"Barefoot MicroSub 45 - Active Studio Subwoofer (Pair)","description":"\u003cp data-pm-slice=\"0 0 []\"\u003eThe \u003cstrong\u003eBarefoot MicroSub 45\u003c\/strong\u003e is a professional subwoofer designed specifically to enhance the depth, power, and low-frequency range of \u003cstrong\u003eBarefoot MicroMain 45\u003c\/strong\u003e reference monitors. Equipped with dual 8-inch woofers using Dual-Force™ technology, the \u003cstrong\u003eBarefoot MicroSub 45\u003c\/strong\u003e provides clean and precise bass reproduction down to 25 Hz. With an analog high-pass filter set at 80 Hz, the \u003cstrong\u003eBarefoot MicroSub 45\u003c\/strong\u003e relieves the load on the \u003cstrong\u003eMicroMain 45\u003c\/strong\u003e monitors, expanding their dynamic range.\u003c\/p\u003e\n\u003cp data-pm-slice=\"0 0 []\"\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/-_2xwBlrmls?si=3KOO0-naKqhj0MKB\" height=\"315\" width=\"560\" allowfullscreen=\"\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003eDual-Force™ technology eliminates vibrations inside the cabinet, ensuring exceptional accuracy and distortion-free sound. The \u003cstrong\u003eBarefoot MicroSub 45\u003c\/strong\u003e is available as part of the \u003cstrong\u003eMicroStack45\u003c\/strong\u003e stereo package, where it seamlessly complements the \u003cstrong\u003eMicroMain 45\u003c\/strong\u003e monitors to create a complete system for professional studio work.\u003c\/p\u003e\n\u003ch3 data-pm-slice=\"0 0 []\"\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual 8-inch subwoofers in each cabinet, delivering precise, powerful bass.\u003c\/li\u003e\n\u003cli\u003eDual-Force™ technology to minimize vibrations and distortion.\u003c\/li\u003e\n\u003cli\u003e1000W of power (500W per subwoofer) for impressive dynamics.\u003c\/li\u003e\n\u003cli\u003eFrequency range down to 25 Hz, ideal for low-end frequencies.\u003c\/li\u003e\n\u003cli\u003e80 Hz analog high-pass filter that relieves the load on the MicroMain 45 monitors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-pm-slice=\"0 0 []\" data-mce-fragment=\"1\"\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Dual-Force™ Subwoofer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Frequency:\u003c\/strong\u003e -3 dB @ 25 Hz, Q = 0.707, slope = 12 dB\/octave\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubwoofers:\u003c\/strong\u003e Dual 8-inch aluminum woofers, maximum excursion +\/- 13 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier power:\u003c\/strong\u003e 500W per subwoofer\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCrossover frequency:\u003c\/strong\u003e 80 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (WxDxH):\u003c\/strong\u003e 15.5\" x 10.88\" x 11.0\" (394 x 273 x 279 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 20.5 kg per subwoofer\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Barefoot Sound","offers":[{"title":"Default Title","offer_id":49988539842897,"sku":"27916","price":6483.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/BarefootMicroSub45-Pair1.jpg?v=1748032161"},{"product_id":"atc-scs70-pro","title":"ATC SCS70 PRO - 12 inch Active Studio Subwoofer","description":"\u003cp data-pm-slice=\"1 1 []\"\u003eThe \u003cstrong\u003eATC SCS70 PRO\u003c\/strong\u003e is a 12”\/300mm active subwoofer, engineered to deliver the outstanding performance required by audio and music professionals. It is perfectly matched to ATC’s range of active monitors, making it ideal for stereo, multi-channel surround, and immersive audio formats such as Dolby Atmos.\u003c\/p\u003e\n\u003ch3\u003eKey Features of ATC SCS70 PRO\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHand-built ATC SS75-314SC 12”\/300mm high-excursion subwoofer driver.\u003c\/li\u003e\n\u003cli\u003eExceptional balance of high SPL capability, low cut-off frequency, and low distortion.\u003c\/li\u003e\n\u003cli\u003eATC-designed discrete MOSFET Class A-B power amplifier.\u003c\/li\u003e\n\u003cli\u003eStereo balanced inputs and stereo ‘Link’ balanced outputs.\u003c\/li\u003e\n\u003cli\u003eUser-adjustable level, low-pass frequency, and phase controls.\u003c\/li\u003e\n\u003cli\u003eRemote muting capability via footswitch (sold separately, ¼”\/6.35mm jack connection).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAcoustic Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBass Driver:\u003c\/strong\u003e 1 x SS75-314SC 8Ω.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Frequency Cut-off: \u003c\/strong\u003e22Hz (-6dB, half space, low pass filter set at 80Hz).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Pass Filters: \u003c\/strong\u003e50Hz, 65Hz, 80Hz, 320Hz (-6dB, 4th order Linkwitz Riley).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum SPL: \u003c\/strong\u003e110dB continuous, 116dB peak.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e +4dBu (Gain +6dB, Level 0dB, pink noise, LPF @ 80Hz).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eElectronic Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier Type: \u003c\/strong\u003eGrounded Source MOSFET Class A-B, convection-cooled.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Power: \u003c\/strong\u003e300W into 8Ω.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD+N:\u003c\/strong\u003e \u0026lt;0.003%\/-90dB at 100Hz, 300W into 8Ω.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Inputs:\u003c\/strong\u003e 2 x female XLR (pin 2 hot).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBalanced Outputs:\u003c\/strong\u003e 2 x male XLR (pin 2 hot).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevel Control:\u003c\/strong\u003e 0dB to -11dB in 1dB steps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase Control: \u003c\/strong\u003e0-180°.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolarity Control:\u003c\/strong\u003e In-phase\/out-of-phase.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e Idle 8W; 1\/8th Power 170W; Full Power 500W.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ATC","offers":[{"title":"Default Title","offer_id":50124719063377,"sku":"48879","price":4677.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/ATCSCS70PRO1.jpg?v=1746641283"},{"product_id":"psi-audio-a125-m-sub-metal-black","title":"PSI AUDIO A125-M SUB Metal Black - 10 inch Active Studio Subwoofer","description":"\u003cp\u003e\u003cstrong\u003ePSI Audio A125-M SUB Metal Black\u003c\/strong\u003e is a compact active subwoofer that delivers outstanding sound quality and precise low-frequency reproduction. Featuring a 10-inch driver, a 225 W Class G amplifier, and a frequency range of 28 Hz to 90 Hz, this subwoofer is an excellent choice for professional studio applications, both in stereo and multi-channel setups.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES OF PSI AUDIO A125-M SUB METAL BLACK\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDual MDF Enclosure with Anti-Resonance System:\u003c\/strong\u003e Reduces unwanted vibrations and ensures clean, natural sound.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAdvanced Class G Amplifier:\u003c\/strong\u003e Provides high efficiency while maintaining low operating temperature.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAcoustically Isolated Amplifier Module:\u003c\/strong\u003e Eliminates distortions and unwanted artifacts.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eXLR Inputs and Outputs:\u003c\/strong\u003e Allows seamless integration with satellite monitors in stereo and surround configurations.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInput Sensitivity Control:\u003c\/strong\u003e Facilitates precise signal level calibration.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003e\"Roll-Off\" Adjustment:\u003c\/strong\u003e Customizes the bass response to suit the room's acoustics.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eBuilt-in Protection Circuits:\u003c\/strong\u003e Ensure safe operation, with an overload indicator warning of excessive signal levels.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFull Compatibility with PSI Audio Monitors:\u003c\/strong\u003e Ensures perfect phase and amplitude response matching.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS OF PSI AUDIO A125-M SUB METAL BLACK\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e PSI Audio\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eSubwoofer Driver:\u003c\/strong\u003e 10\"\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNumber of Drivers:\u003c\/strong\u003e 1\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAmplifier Power:\u003c\/strong\u003e 150 W\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 28 - 96 Hz\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e 111 dB\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 320 mm\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 385 mm\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 480 mm\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 22 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003ePSI Audio A125-M SUB Metal Black\u003c\/strong\u003e is an excellent choice for professional audio engineers who demand precise and dynamic bass reproduction in their monitoring systems. With its advanced design and high-quality components, this subwoofer ensures exceptional control over low frequencies.\u003c\/p\u003e","brand":"PSI AUDIO","offers":[{"title":"Default Title","offer_id":50659812278609,"sku":"43474","price":3185.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/PSIAUDIOA125-MSUBMetalBlack.jpg?v=1746640264"},{"product_id":"genelec-7370ap-subwoofer-sam-7370a-black","title":"Genelec 7370A Black - 12 inch SAM Powered Studio Subwoofer","description":"\u003cp\u003e\u003cstrong\u003eGENELEC 7370AP SAM 7370A\u003c\/strong\u003e is a professional 12\" active studio subwoofer that delivers deep, precise low-end performance starting from 19 Hz. Designed for demanding studio environments, it integrates Genelec’s advanced Smart Active Monitoring (SAM™) technology and AutoCal automatic room calibration, ensuring accurate sound reproduction and seamless integration into any monitoring setup.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES OF GENELEC 7370AP SUBWOOFER\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDriver:\u003c\/strong\u003e 12\" (305 mm) low-frequency driver.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eAmplifier:\u003c\/strong\u003e 400 W Class D power amplifier.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 19 Hz – 100 Hz (±3 dB).\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMaximum SPL:\u003c\/strong\u003e ≥118 dB at 1 meter.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eEnclosure design:\u003c\/strong\u003e Patented Laminar Spiral Enclosure (LSE™) for efficient airflow and low resonance.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1 x LFE (balanced XLR), 7 x balanced XLR, 2 x RJ45 GLM network, 1 x 1\/4\" TS Jack (bypass switch), 1 x AES\/EBU XLR digital input, 1 x XLR link in.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 7 x balanced XLR, 1 x AES\/EBU XLR digital output, 1 x XLR link out.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eNoise floor:\u003c\/strong\u003e \u0026lt;5 dB.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eTotal harmonic distortion:\u003c\/strong\u003e ≤2\/3% @ 95 dB SPL; ≤0.01% (amplifier).\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eCalibration:\u003c\/strong\u003e AutoCal automatic calibration with GLM support.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eConstruction:\u003c\/strong\u003e MDF and metal composite cabinet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS OF GENELEC 7370AP\u003c\/h3\u003e\n\u003cul\u003e\n    \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 625 x 555 x 496 mm.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 48 kg.\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e +12 to +6 dB (analog), -30 dB (digital).\u003c\/li\u003e\n    \u003cli\u003e\n\u003cstrong\u003eMade in:\u003c\/strong\u003e Finland.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eGENELEC 7370AP\u003c\/strong\u003e is the ideal subwoofer for producers and engineers seeking ultra-precise bass performance, intelligent room calibration, and a compact yet powerful low-end solution.\u003c\/p\u003e","brand":"GENELEC","offers":[{"title":"Default Title","offer_id":50956755894609,"sku":"40201","price":2818.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/GENELEC7370AP1.jpg?v=1746537806"},{"product_id":"telegrapher-elephant","title":"Telegrapher Elephant - Active Analog Studio Subwoofer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eTelegrapher ELEPHANT\u003c\/strong\u003e – a powerful active analog subwoofer with a sealed enclosure, delivering deep, controlled bass from 20 to 300 Hz and peak SPL of 110.5 dB. With a Class D amplifier (2 × 500 W), all-analog signal path, and user-controllable crossover, ELEPHANT is tailored for critical listening environments and high-end studio setups.\u003c\/p\u003e\n\u003cp\u003eIts sealed design ensures tight transients and eliminates port noise, resulting in an exceptionally clean low-end. The patented 12.5” paper sandwich woofer delivers precise, musical bass, while LED indicators and auto-shutdown protections offer reliable operation. Featuring XLR\/RCA I\/O and phase control (0–360°), ELEPHANT adapts seamlessly to any monitor system.\u003c\/p\u003e\n\u003cp\u003eAvailable in five elegant colors with a soft-touch matte finish, ELEPHANT blends power, precision, and aesthetics for an immersive sonic experience.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSealed active analog subwoofer for professional audio environments\u003c\/li\u003e\n\u003cli\u003eFrequency response: 20 – 300 Hz, f3: 41.7 Hz, f6: 31.7 Hz\u003c\/li\u003e\n\u003cli\u003eClass D amplification: 2 × 500 W (Bridged)\u003c\/li\u003e\n\u003cli\u003ePatented 12.5\" paper sandwich cone woofer with foam filling\u003c\/li\u003e\n\u003cli\u003eUser-controllable crossover (30–300 Hz, 2nd order LPF), phase control (0–360°)\u003c\/li\u003e\n\u003cli\u003eBalanced XLR and unbalanced RCA inputs and passthrough outputs\u003c\/li\u003e\n\u003cli\u003ePeak SPL: 110.5 dB @ 1 meter\u003c\/li\u003e\n\u003cli\u003eLED indicators: white (normal), red (fault), flashing red (clipping)\u003c\/li\u003e\n\u003cli\u003eProtective shutdown in case of overheating, clipping, or signal faults\u003c\/li\u003e\n\u003cli\u003eAll-analog signal path for warm, immersive bass\u003c\/li\u003e\n\u003cli\u003eBuilt-in standby mode with 120-minute timeout (user controllable)\u003c\/li\u003e\n\u003cli\u003ePremium finish in five color options\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnclosure type: Sealed\u003c\/li\u003e\n\u003cli\u003eNumber of drivers: 1-way\u003c\/li\u003e\n\u003cli\u003eWoofer: 32 cm \/ 12.5\" paper sandwich cone with foam filling\u003c\/li\u003e\n\u003cli\u003eAmplifier type: Class D, 2 × 500 W\u003c\/li\u003e\n\u003cli\u003eAmplifier THD+N: 0.0018%\u003c\/li\u003e\n\u003cli\u003eInputs: 2 × XLR (balanced), 2 × RCA (unbalanced)\u003c\/li\u003e\n\u003cli\u003eOutputs: 2 × XLR (thru), 2 × RCA (thru)\u003c\/li\u003e\n\u003cli\u003eMax SPL: 110.5 dB @ 1 m\u003c\/li\u003e\n\u003cli\u003ePower rating: Max 1200 W, RMS 480 W\u003c\/li\u003e\n\u003cli\u003eVoltage: 110–120 V AC ±10% \/ 200–240 V AC ±10%, 47–63 Hz\u003c\/li\u003e\n\u003cli\u003eConnector: 3-pin IEC, 250 V AC, 10 A\u003c\/li\u003e\n\u003cli\u003eStandby: Auto on\/off (user selectable, 120 min)\u003c\/li\u003e\n\u003cli\u003eDimensions: 43 × 44 × 52.5 cm (HxWxD)\u003c\/li\u003e\n\u003cli\u003eWeight: 38 kg\u003c\/li\u003e\n\u003cli\u003eCooling: External heatsink (3 cm)\u003c\/li\u003e\n\u003cli\u003eShipping: One box per speaker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Telegrapher","offers":[{"title":"Default Title","offer_id":51421322805585,"sku":"56898","price":5875.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/TelegrapherElephant1.jpg?v=1752507606"},{"product_id":"adam-sub8","title":"ADAM Sub8 - 8 inch Active Studio Subwoofer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eADAM Sub8\u003c\/strong\u003e – active 8.5″ studio subwoofer with a 160 W RMS (240 W Music) PWM\/ICEpower amplifier, frequency range of 28–150 Hz, and a max SPL ≥110 dB (1 m). On the front, it features two motorized knobs (level and crossover), which can also be controlled via the included wireless remote. The rear panel includes XLR\/RCA inputs and \"Satellite Out\" XLR\/RCA outputs for connecting monitors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSub8\u003c\/strong\u003e is designed to extend the low-end in small rooms (up to approx. 20 m²) and nearfield monitoring setups. The 8.5″ woofer with a 38 mm voice coil, driven by a cool and efficient ICEpower amplifier, delivers tight and clean bass, while remote control of level and crossover frequency allows precise tuning from the listening position.\u003c\/p\u003e\n\u003cp\u003eSetup is simplified by the adjustable 50–150 Hz crossover, switchable \u003cem\u003eSatellite\u003c\/em\u003e filter at 85 Hz (Dolby recommendation), and 0°\/180° phase switch. The \"Signal On\" mode automatically powers the unit on or off, and the XLR\/RCA connectors ensure compatibility with most studio setups.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e8.5″ woofer (coated paper) with 38 mm voice coil\u003c\/li\u003e\n\u003cli\u003ePWM\/ICEpower amplifier: 160 W RMS \/ 240 W Music\u003c\/li\u003e\n\u003cli\u003eFrequency response 28–150 Hz; max SPL ≥110 dB (1 m)\u003c\/li\u003e\n\u003cli\u003eMotorized front panel controls + wireless remote included\u003c\/li\u003e\n\u003cli\u003eAdjustable crossover 50–150 Hz; 85 Hz satellite filter (switchable)\u003c\/li\u003e\n\u003cli\u003eXLR\/RCA inputs and \"Satellite Out\" XLR\/RCA outputs\u003c\/li\u003e\n\u003cli\u003ePhase switch 0°\/180°; \"Signal On\" (auto-standby) mode\u003c\/li\u003e\n\u003cli\u003eRecommended for small rooms \/ nearfield setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: 210 mm \/ 8.5″; coated paper cone; 38 mm voice coil\u003c\/li\u003e\n\u003cli\u003eAmplifier: PWM type; 160 W RMS \/ 240 W Music\u003c\/li\u003e\n\u003cli\u003eFrequency range: 28 Hz – 150 Hz; THD \u0026gt;60 Hz ≤ 1%\u003c\/li\u003e\n\u003cli\u003eMax peak SPL: ≥110 dB (1 m)\u003c\/li\u003e\n\u003cli\u003eCrossover: 50–150 Hz; 85 Hz satellite filter (on\/off); phase 0°\/180°\u003c\/li\u003e\n\u003cli\u003eInputs: analog XLR \/ RCA; impedance 10 kΩ\u003c\/li\u003e\n\u003cli\u003eOutputs: \"Satellite Out\" XLR \/ RCA (to monitors)\u003c\/li\u003e\n\u003cli\u003eControls: input level, crossover frequency (front, motorized + remote)\u003c\/li\u003e\n\u003cli\u003eDimensions \/ weight: 410 × 260 × 380 mm; 12 kg\u003c\/li\u003e\n\u003cli\u003eWarranty: 5 years (2 years + 3 after registration)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ADAM","offers":[{"title":"Default Title","offer_id":51736791351633,"sku":"10074","price":591.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/ADAMSub81.jpg?v=1757360379"},{"product_id":"adam-sub12","title":"ADAM Sub12 - 12 inch Active Studio Subwoofer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eADAM Audio Sub12\u003c\/strong\u003e – powerful active studio subwoofer designed to extend low frequencies of monitoring systems down to 22 Hz. Features sturdy 12-inch woofer with heavy-duty coil and paper cone, optimized for accurate reproduction in bass reflex enclosure. Down-firing bass reflex tube minimizes ventilation noise. PWM amplifier with over 90% efficiency handles critical passages without overheating. Additional output for cascading multiple subwoofers. Provides precise low cutoff (-3 dB at 22 Hz) and high SPL (115 dB at 1 m).\u003c\/p\u003e\n\u003cp\u003eSub12 offers XLR\/RCA inputs with 10 kOhm impedance, 50-150 Hz crossover, and max SPL 115 dB. Robust enclosure (600 x 360 x 450 mm, 26 kg) with rear panel for durability and easy setup. Ideal for midfield and nearfield monitoring in recording studios.\u003c\/p\u003e\n\u003cp\u003eAs ADAM series extension, Sub12 combines innovations with precision, ready for professional listening without distortion.\u003c\/p\u003e\n\u003ch3\u003eMAIN FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExtends low frequencies to 22 Hz\u003c\/li\u003e\n\u003cli\u003e12-inch woofer with heavy-duty coil and paper cone\u003c\/li\u003e\n\u003cli\u003eDown-firing bass reflex tube for minimal noise\u003c\/li\u003e\n\u003cli\u003ePWM amplifier: 200 W RMS \/ 300 W music, \u0026gt;90% efficiency\u003c\/li\u003e\n\u003cli\u003eAdditional output for cascading subwoofers\u003c\/li\u003e\n\u003cli\u003eAnalog XLR\/RCA inputs\u003c\/li\u003e\n\u003cli\u003e50–150 Hz crossover\u003c\/li\u003e\n\u003cli\u003e5-year warranty upon registration\u003c\/li\u003e\n\u003cli\u003ePortable: 600 x 360 x 450 mm, 26 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel\u003c\/strong\u003e: Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 26 kg (57.3 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (H × W × D)\u003c\/strong\u003e: 600 x 360 x 450 mm (23.6″ × 14.2″ × 17.7″)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: 5 years (2 years standard + 3 years upon registration)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded\u003c\/strong\u003e: Power cord, manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs\u003c\/strong\u003e: Analog XLR \/ RCA, impedance 10 kOhm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier\u003c\/strong\u003e: PWM, 200 W RMS \/ 300 W music\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustics\u003c\/strong\u003e: Frequency response 22 Hz–150 Hz, THD \u0026gt;60 Hz ≤1 %, max SPL ≥115 dB @ 1 m, crossover 50–150 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriver\u003c\/strong\u003e: Basket diameter 12″, voice coil 2″ (50 mm), cone material paper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ADAM","offers":[{"title":"Default Title","offer_id":51736791613777,"sku":"10076","price":1388.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/ADAMSub121.jpg?v=1758787325"},{"product_id":"adam-sub10-mk2","title":"ADAM Sub10 Mk2 - 10 inch Active Studio Subwoofer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eADAM Audio Sub10 Mk2\u003c\/strong\u003e – powerful active studio subwoofer designed to extend low frequencies of monitoring systems down to 25 Hz. Features sturdy 10-inch woofer with extended cone travel and heavy-duty coil, optimized for accurate reproduction in bass reflex enclosure. Down-firing bass reflex tube minimizes ventilation noise. PWM amplifier with over 90% efficiency handles critical passages without overheating. Additional output for cascading multiple subwoofers. Provides precise low cutoff (-3 dB at 25 Hz) and high SPL (113 dB at 1 m).\u003c\/p\u003e\n\u003cp\u003eSub10 Mk2 offers XLR\/RCA inputs with 10 kOhm impedance, 50-150 Hz crossover, and max SPL 113 dB. Robust enclosure (560 x 300 x 400 mm, 21 kg) with rear panel for durability and easy setup. Ideal for nearfield and midfield monitoring in recording studios.\u003c\/p\u003e\n\u003cp\u003eAs ADAM series extension, Sub10 Mk2 combines innovations with precision, ready for professional listening without distortion.\u003c\/p\u003e\n\u003ch3\u003eMAIN FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExtends low frequencies to 25 Hz\u003c\/li\u003e\n\u003cli\u003e10-inch woofer with extended travel and heavy-duty coil\u003c\/li\u003e\n\u003cli\u003eDown-firing bass reflex tube for minimal noise\u003c\/li\u003e\n\u003cli\u003ePWM amplifier: 200 W RMS \/ 300 W music, \u0026gt;90% efficiency\u003c\/li\u003e\n\u003cli\u003eAdditional output for cascading subwoofers\u003c\/li\u003e\n\u003cli\u003eAnalog XLR\/RCA inputs\u003c\/li\u003e\n\u003cli\u003e50–150 Hz crossover\u003c\/li\u003e\n\u003cli\u003e5-year warranty upon registration\u003c\/li\u003e\n\u003cli\u003ePortable: 560 x 300 x 400 mm, 21 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePanel\u003c\/strong\u003e: Rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 21 kg (46.3 lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (H × W × D)\u003c\/strong\u003e: 560 x 300 x 400 mm (22″ × 12″ × 15.5″)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty\u003c\/strong\u003e: 5 years (2 years standard + 3 years upon registration)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded\u003c\/strong\u003e: Power cord, manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs\u003c\/strong\u003e: Analog XLR \/ RCA, impedance 10 kOhm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier\u003c\/strong\u003e: PWM, 200 W RMS \/ 300 W music\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAcoustics\u003c\/strong\u003e: Frequency response 25 Hz–150 Hz, THD \u0026gt;60 Hz ≤1 %, max SPL ≥113 dB @ 1 m, crossover 50–150 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDriver\u003c\/strong\u003e: Basket diameter 10″, voice coil 2″ (50 mm), cone material paper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"ADAM","offers":[{"title":"Default Title","offer_id":51736791679313,"sku":"10075","price":1073.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/ADAMSub10Mk21.jpg?v=1758787316"},{"product_id":"dynaudio-core-sub","title":"Dynaudio Core Sub - Quad 9.5 inch Active Studio Subwoofer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eDynaudio Core Sub\u003c\/strong\u003e – flagship studio subwoofer with four 9-inch MSP+ Hybrid Drive woofers, designed for low-frequency extension of Core monitors (7, 47, 59). Equipped with 1000W Class-D amplification (2x 500W), delivers deep, controlled bass to 15 Hz (-3 dB), with flat response to 20 Hz. Handcrafted in Denmark, anti-resonant cabinet and DSP for calibration (tilt, low-cut). Ideal for studios, post-production, and live, with VESA or stacking mounting. Supports analog and digital inputs (AES3\/SPDIF up to 192 kHz).\u003c\/p\u003e\n\u003cp\u003eThe device excels in precision, low distortion, and flexibility, minimizing room mode issues.\u003c\/p\u003e\n\u003ch3\u003eMAIN FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4 x 9\" MSP+ Hybrid Drive woofers (aluminum + MSP, dual damping)\u003c\/li\u003e\n\u003cli\u003e1000W Class-D (2x 500W) for headroom and control\u003c\/li\u003e\n\u003cli\u003eFrequency: 15 Hz–80 Hz (-3 dB), flat to 20 Hz\u003c\/li\u003e\n\u003cli\u003eDSP: Tilt (dark\/bright), low-cut 80 Hz, phase alignment\u003c\/li\u003e\n\u003cli\u003eConnections: Analog XLR, digital AES3\/SPDIF (up to 192 kHz)\u003c\/li\u003e\n\u003cli\u003eCabinet: Handmade in Denmark, indentations for stacking, VESA mount\u003c\/li\u003e\n\u003cli\u003eVibration reduction: Opposed drivers, stable build\u003c\/li\u003e\n\u003cli\u003eCompatible with Core series, individual calibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofers\u003c\/strong\u003e: 4 x 9\" MSP+ Hybrid Drive (aluminum cone, dual damping)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplification\u003c\/strong\u003e: 1000W Class-D (2x 500W)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response\u003c\/strong\u003e: 15 Hz–80 Hz (-3 dB), flat 20 Hz–80 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax SPL\u003c\/strong\u003e: \u0026gt;120 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTHD\u003c\/strong\u003e: \u0026lt;0.3% (20 Hz–200 Hz @ 95 dB SPL)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections\u003c\/strong\u003e: Analog XLR (balanced), AES3\/SPDIF (XLR\/RCA, up to 192 kHz\/24-bit)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDSP\u003c\/strong\u003e: Tilt EQ, low-cut 80 Hz, phase, volume, delay\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower\u003c\/strong\u003e: 100-240V AC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (WxHxD)\u003c\/strong\u003e: 490 x 490 x 490 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight\u003c\/strong\u003e: 49 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncluded\u003c\/strong\u003e: Power supply, cables, mounting pads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":51736800624977,"sku":"50663","price":3110.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/DynaudioCoreSub1.jpg?v=1758732298"},{"product_id":"dynaudio-9s-subwoofer-aktywny","title":"DYNAUDIO 9S - 9 inch Active Studio Subwoofer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eDynaudio 9S\u003c\/strong\u003e – compact, sealed-box active studio subwoofer with a 9.5″ long-throw MSP driver and a 300 W Class-D amplifier. Extends monitoring systems down to 22 Hz and integrates easily with stereo or surround setups via dedicated LFE\/Slave and SAT\/SUB I\/O. Continuously variable low-pass (50–150 Hz), switchable SAT high-pass (Flat\/60\/80 Hz), 0°\/180° phase and Auto On\/Off make room integration fast and accurate.\u003c\/p\u003e\n\u003cp\u003e9S is designed as a precise low-frequency partner for Dynaudio nearfields (e.g., LYD, BM) and other professional monitors. The sealed enclosure delivers tight, controlled bass, while master\/slave linking and SAT outputs simplify multi-sub and satellite configurations without extra bass-management hardware.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e300 W Class-D amp driving a 9.5″ long-throw MSP woofer\u003c\/li\u003e\n  \u003cli\u003eSealed cabinet for accurate, fast low-end\u003c\/li\u003e\n  \u003cli\u003eFrequency response: 22–175 Hz (±3 dB)\u003c\/li\u003e\n  \u003cli\u003eContinuously variable low-pass: 50–150 Hz\u003c\/li\u003e\n  \u003cli\u003eSAT outputs with switchable high-pass: Flat \/ 60 Hz \/ 80 Hz\u003c\/li\u003e\n  \u003cli\u003eInputs\/outputs: LFE\/Slave in, SAT\/SUB in, SAT out (L\/R), Slave out (all XLR)\u003c\/li\u003e\n  \u003cli\u003ePhase switch: 0° \/ 180°; Auto On\/Off\u003c\/li\u003e\n  \u003cli\u003eMaster\/Slave operation for multi-sub setups\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eSystem: Single-driver, active 9.5″ subwoofer\u003c\/li\u003e\n  \u003cli\u003eDriver: 24 cm (MSP) long-throw\u003c\/li\u003e\n  \u003cli\u003eAmplifier power: 300 W (Class-D)\u003c\/li\u003e\n  \u003cli\u003eFrequency response (±3 dB): 22 Hz – 175 Hz\u003c\/li\u003e\n  \u003cli\u003eMax SPL: 106 dB\u003c\/li\u003e\n  \u003cli\u003eLow-pass filter: 50–150 Hz (continuous)\u003c\/li\u003e\n  \u003cli\u003eHigh-pass to SAT outs: Flat \/ 60 Hz \/ 80 Hz\u003c\/li\u003e\n  \u003cli\u003ePhase: 0° \/ 180°\u003c\/li\u003e\n  \u003cli\u003eAnalog inputs: 1 × XLR LFE, 2 × XLR Stereo (SAT\/SUB)\u003c\/li\u003e\n  \u003cli\u003eAnalog outputs: 2 × XLR SAT Out, 1 × XLR Slave Out\u003c\/li\u003e\n  \u003cli\u003eEnclosure: Sealed\u003c\/li\u003e\n  \u003cli\u003eAC power: 100–120 V \/ 200–240 V, 50\/60 Hz; Standby \u0026lt; 0.5 W; Max 350 W\u003c\/li\u003e\n  \u003cli\u003eDimensions (W × H × D): 266 × 276 × 320 mm (10.5″ × 10.9″ × 12.6″)\u003c\/li\u003e\n  \u003cli\u003eWeight: 10.5 kg (23.1 lb)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":51741227843921,"sku":"58723","price":888.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/DYNAUDIO9S1.jpg?v=1758393564"},{"product_id":"dynaudio-core-sub-compact-subwoofer-aktywny","title":"DYNAUDIO CORE SUB COMPACT - Dual 9 inch Active Studio Subwoofer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eDYNAUDIO CORE SUB COMPACT\u003c\/strong\u003e is a compact active subwoofer with dual 9\" MSP+ Hybrid Drive woofers, 560W Class-D amplification, and advanced DSP — ideal for small studios, immersive setups, and professional audio environments requiring precise, powerful low-end extension down to 16Hz.\u003c\/p\u003e\n\n\u003cp\u003eThis space-efficient subwoofer integrates seamlessly with Core series monitors, featuring opposed driver configuration to minimize vibration, customizable DSP for room compensation, and versatile mounting options. Handcrafted in Denmark, it delivers tight, controlled bass with minimal distortion at high SPL, perfect for 2.1 stereo or up to 17.1.11 immersive systems.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003eDual 9\" opposed MSP+ Hybrid Drive woofers for vibration-free performance\u003c\/li\u003e\n \u003cli\u003ePascal Class-D amplifiers: 560W total (2 x 280W)\u003c\/li\u003e\n \u003cli\u003eAdvanced DSP engine matching Core series for room tuning\u003c\/li\u003e\n \u003cli\u003eFrequency response: 16 - 200 Hz (±3 dB)\u003c\/li\u003e\n \u003cli\u003eMaximum SPL: 109 dB (1m anechoic), 115 dB peak\u003c\/li\u003e\n \u003cli\u003eCompact design with VESA wall-mount compatibility\u003c\/li\u003e\n \u003cli\u003eBalanced analog XLR input (mono), digital AES3 input\u003c\/li\u003e\n \u003cli\u003eHandcrafted in Denmark with individual calibration\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n \u003cli\u003eDriver Configuration: 2 x 9\" MSP+ Hybrid Drive woofers (opposed)\u003c\/li\u003e\n \u003cli\u003eAmplification: Pascal Class-D, 560W (2 x 280W)\u003c\/li\u003e\n \u003cli\u003eFrequency Response: 16 - 200 Hz (±3 dB)\u003c\/li\u003e\n \u003cli\u003eMaximum SPL: 109 dB (1m anechoic), 115 dB peak\u003c\/li\u003e\n \u003cli\u003eConverter: 24-bit \/ 192 kHz\u003c\/li\u003e\n \u003cli\u003eInputs: 1 x XLR balanced analog (mono), 1 x XLR AES3 digital\u003c\/li\u003e\n \u003cli\u003eOutputs: 1 x XLR AES3 digital thru\u003c\/li\u003e\n \u003cli\u003eDSP: Room compensation filters (meter bridge, stand, bracket, free space, soffit)\u003c\/li\u003e\n \u003cli\u003ePower: IEC mains (100-240V)\u003c\/li\u003e\n \u003cli\u003eDimensions (H x W x D): 400 x 370 x 280 mm\u003c\/li\u003e\n \u003cli\u003eWeight: 23.5 kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Dynaudio","offers":[{"title":"Default Title","offer_id":51741235183953,"sku":"58774","price":2324.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/DYNAUDIOCORESUBCOMPACT1.jpg?v=1758361394"},{"product_id":"ik-multimedia-iloud-sub","title":"IK Multimedia iLoud Sub - 8 inch Powered Studio Subwoofer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eIK Multimedia iLoud Sub\u003c\/strong\u003e – compact active \u003ca href=\"https:\/\/wrdtunes.com\/collections\/subwoofers\" target=\"_blank\" rel=\"noopener\"\u003estudio subwoofer\u003c\/a\u003e built for producers and engineers working in rooms where low-end accuracy is the first thing to fall apart. A 6.5\" aluminium driver with dual 6.5\" passive radiators reaches down to 25 Hz with tight, defined response that no nearfield monitor in this price range can replicate on its own. The built-in ARC X room correction calibrates both the subwoofer and any connected satellite monitors simultaneously – regardless of brand – making this one of the few subs on the market that genuinely improves the entire monitoring chain rather than just adding more bass.\u003c\/p\u003e\n\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/rHWW1-VbQ4Q?si=dFFiFAqZdGoDpBzD\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\n\u003ch3\u003eRoom Correction That Changes How You Mix\u003c\/h3\u003e\n\u003cp\u003eSmall rooms stack standing waves, load up corners, and deliver bass response that varies wildly from note to note. ARC X takes a measurement with the included mic, then automatically sets the crossover point, aligns phase, adjusts levels, and applies targeted EQ correction across the full system – sub and satellites together. The corrected, crossovered signal is distributed through the XLR outputs to your monitors, so the entire chain operates as a single, coherent system. The result: kick drums, bass lines, and sub-harmonic content you can actually trust, not estimate. Engineers stop second-guessing whether a mix will translate – once ARC X is dialled in, the room gets out of the way.\u003c\/p\u003e\n\u003ch3\u003eDesktop Footprint, No Compromises on Extension\u003c\/h3\u003e\n\u003cp\u003eAt 244 × 250 × 283 mm and 7.1 kg, the iLoud Sub sits under a desk or on a shelf without rearranging the workspace. A Class-D amplifier rated at 160 W RMS \/ 200 W peak delivers a maximum SPL of 106 dB peak at 40 Hz. Connectivity covers balanced XLR and unbalanced RCA I\/O, USB-B digital input at up to 96 kHz PCM, and Bluetooth (SBC\/AAC). Manual crossover points of 50 Hz or 80 Hz are available, with automatic handling engaged whenever ARC X calibration is active. It extends any 3–7\" nearfield monitoring system into a full-range setup without requiring a complete speaker overhaul.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eARC X automatic calibration – simultaneously corrects the subwoofer and connected monitors with automatic phase alignment, level matching, and EQ\u003c\/li\u003e\n\u003cli\u003e25 Hz low-end extension – full sub-harmonic detail on kicks, bass, and sound design that compact monitors cannot reproduce\u003c\/li\u003e\n\u003cli\u003e6.5\" aluminium driver + dual 6.5\" passive radiators – controlled, defined bass without mid-range clouding\u003c\/li\u003e\n\u003cli\u003e160 W RMS \/ 200 W peak Class-D amplifier – high efficiency, low distortion\u003c\/li\u003e\n\u003cli\u003eFlexible connectivity – XLR, RCA, USB-B digital, Bluetooth (SBC\/AAC)\u003c\/li\u003e\n\u003cli\u003eSmallest footprint in class – 244 × 250 × 283 mm, 7.1 kg\u003c\/li\u003e\n\u003cli\u003eManual crossover at 50 Hz or 80 Hz, or fully automatic via ARC X\u003c\/li\u003e\n\u003cli\u003eIncludes ARC measurement microphone with clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWoofer: 6.5\" aluminium cone\u003c\/li\u003e\n\u003cli\u003ePassive radiators: 2 × 6.5\"\u003c\/li\u003e\n\u003cli\u003eAmplifier power: 160 W RMS \/ 200 W peak\u003c\/li\u003e\n\u003cli\u003eFrequency response: 25 Hz – 150 Hz (−6 dB)\u003c\/li\u003e\n\u003cli\u003eMaximum SPL: 106 dB peak (at 40 Hz)\u003c\/li\u003e\n\u003cli\u003eAnalog inputs: 2 × XLR\/TRS combo, 2 × RCA\u003c\/li\u003e\n\u003cli\u003eAnalog outputs: 2 × XLR, 2 × RCA\u003c\/li\u003e\n\u003cli\u003eDigital input: USB-B (up to 96 kHz PCM)\u003c\/li\u003e\n\u003cli\u003eBluetooth: SBC \/ AAC\u003c\/li\u003e\n\u003cli\u003eCrossover: 50 Hz \/ 80 Hz (manual) or ARC X (automatic)\u003c\/li\u003e\n\u003cli\u003eDimensions: 244 × 250 × 283 mm\u003c\/li\u003e\n\u003cli\u003eWeight: 7.1 kg\u003c\/li\u003e\n\u003cli\u003eIncluded: USB-B to USB-A cable, power cable, ARC measurement microphone with clamp\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"IK MULTIMEDIA","offers":[{"title":"Default Title","offer_id":52387770138961,"sku":"58499","price":609.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/IKMULTIMEDIAiLoudSub.jpg?v=1763551386"},{"product_id":"genelec-7360apm-subwoofer-sam-7360a-black","title":"Genelec 7360A Black - 10 inch SAM Powered Studio Subwoofer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eGenelec 7360A Black\u003c\/strong\u003e is a Smart Active Monitor (SAM™) studio subwoofer engineered for precise low-frequency reproduction in professional audio environments. Featuring revolutionary Laminar Spiral Enclosure (LSE™) technology, this compact 10-inch subwoofer achieves a maximum SPL of 109 dB with extremely low distortion, delivering clean and articulate bass down to 19 Hz. The perfect low-frequency partner for Genelec 8000A and 7000 series monitors, it provides a complete solution for small to medium studios, post-production, and broadcast facilities.\u003c\/p\u003e\n\u003cp\u003eThe Genelec 7360A stands out with its advanced Bass Management system, supporting 7.1 channel configurations with built-in DSP and AutoCal™ calibration via GLM™ software. This allows the subwoofer to intelligently compensate for room acoustics, optimizing phase, levels, and crossover points for every monitor in the system. With a 300 W Class D amplifier and both analog XLR (7.1) and AES\/EBU digital connectivity, it offers exceptional versatility for stereo and surround workflows.\u003c\/p\u003e\n\u003cp\u003eIntelligent Signal Sensing (ISS™) technology automatically powers down the subwoofer during signal absence to save energy, while overload protection and active crossovers safeguard the driver. The MDF enclosure with bass-reflex design and magnetically shielded 10-inch driver ensures the neutrality and definition demanded by top professionals. In classic black finish, it perfectly complements modern studio aesthetics.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eLSE™ (Laminar Spiral Enclosure) technology for extremely low distortion below 19 Hz.\u003c\/li\u003e\n\u003cli\u003eSAM™ system with GLM™ AutoCal™ for automatic room acoustic optimization.\u003c\/li\u003e\n\u003cli\u003eBuilt-in Bass Management for 7.1 surround configurations with analog and digital connectivity.\u003c\/li\u003e\n\u003cli\u003e300 W Class D amplifier delivering 109 dB SPL while maintaining sound purity.\u003c\/li\u003e\n\u003cli\u003eISS™ power-saving technology and advanced DSP protection circuitry.\u003c\/li\u003e\n\u003cli\u003eFull compatibility with Genelec 8000A, 7000 series monitors and immersive systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: 10\" (250 mm) magnetically shielded woofer.\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 19 Hz - 150 Hz (-6 dB); ±3 dB (19-100 Hz).\u003c\/li\u003e\n\u003cli\u003eMaximum SPL: 109 dB @ 1m.\u003c\/li\u003e\n\u003cli\u003eAmplifier: 300 W Class D with DSP and active crossovers.\u003c\/li\u003e\n\u003cli\u003eConnections: 7x XLR Analog In\/Out (7.1), 1x AES\/EBU XLR In\/Out, 2x RJ45 GLM Network.\u003c\/li\u003e\n\u003cli\u003eDimensions (HxWxD): 527 x 462 x 363 mm; Weight: 27 kg.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"GENELEC","offers":[{"title":"Default Title","offer_id":52813662716241,"sku":"40200","price":1853.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/Genelec7360ASAM1.jpg?v=1768307812"},{"product_id":"avantone-pro-cla-sub","title":"Avantone Pro CLA-Sub - 10 inch Powered Studio Subwoofer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eAvantone Pro CLA-Sub\u003c\/strong\u003e is a 300-watt powered studio subwoofer designed to complement high-end monitoring systems, including the renowned CLA series. It features a unique 10-inch custom driver with a stacked dual-ferrite magnet and a rigid paper cone, ensuring exceptionally clean and fast low-frequency reproduction with minimal distortion. This subwoofer allows engineers to hear the bottom end of their tracks with honesty and precision, rather than relying on artificial harmonic enhancement.\u003c\/p\u003e\n\u003cp\u003eWhat truly sets the CLA-Sub apart is its dual-firing flexibility, allowing it to be configured in either front-firing or downward-firing modes. Front-firing mode provides the cleanest, most accurate response, while downward-firing mode intentionally couples with the floor to increase output by +3 dB for added impact. The unit offers seamless integration with any setup through a sweepable high-cut control (50-180 Hz) and a selectable low-cut filter for the thru outputs (80\/100 Hz). Its ported enclosure and repositionable vibration-dampening feet eliminate the need for aftermarket acoustic isolation pads.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e300W Class D power with a custom 10-inch dual-magnet driver\u003c\/li\u003e\n\u003cli\u003eUser-configurable firing modes: Front-firing or Downward-firing\u003c\/li\u003e\n\u003cli\u003eExclusive dual-magnet technology for superior control and efficiency\u003c\/li\u003e\n\u003cli\u003eRigid paper cone optimized for fast transient response and clarity\u003c\/li\u003e\n\u003cli\u003eSweepable high-cut crossover control from 50–180 Hz\u003c\/li\u003e\n\u003cli\u003eSelectable 80 Hz \/ 100 Hz low-cut filter for signal sent to studio monitors\u003c\/li\u003e\n\u003cli\u003eFootswitch-togglable bypass for instant A\/B monitoring comparisons\u003c\/li\u003e\n\u003cli\u003eSwitchable power-saving standby mode after 30 minutes of inactivity\u003c\/li\u003e\n\u003cli\u003eLocking XLR \/ 1\/4” TRS combo inputs for secure connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency Response: 25 Hz – 180 Hz\u003c\/li\u003e\n\u003cli\u003eMax Peak SPL: ≥ 116 dB\u003c\/li\u003e\n\u003cli\u003ePower Output: 300 Watts\u003c\/li\u003e\n\u003cli\u003eEnclosure Type: Ported (Bass-reflex)\u003c\/li\u003e\n\u003cli\u003eDriver: 10\" Custom Dual-Magnet Woofer\u003c\/li\u003e\n\u003cli\u003eDimensions: 457 × 419 × 419 mm (18” × 16.5” × 16.5”)\u003c\/li\u003e\n\u003cli\u003eWeight: 25 kg (55.12 lbs)\u003c\/li\u003e\n\u003cli\u003eI\/O: 2x XLR Combo In, 2x XLR Out, Footswitch Jack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"Avantone Pro","offers":[{"title":"Default Title","offer_id":52855759536465,"sku":"58843","price":1100.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/AvantoneProCLA-Sub1.jpg?v=1768912796"},{"product_id":"pmc-10-4-sub","title":"PMC 10-4 SUB - Active Subwoofer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003ePMC 10-4 SUB\u003c\/strong\u003e is a dedicated low-frequency module designed as the foundation for the unique PMC10-4 main monitor system. It features four 10-inch (250mm) next-generation bass drivers housing in a single, precision-tuned cabinet. This configuration delivers powerful, fast, and extremely controlled bass, perfectly matched to the characteristics of the main mid-high module. Each driver utilizes a triple-wound voice coil and dual-spider suspension, allowing for a linear excursion of up to 36mm, ensuring zero compression even at extreme output levels.\u003c\/p\u003e\n\u003cp\u003eThe module relies on advanced \u003cem\u003eATL™ (Advanced Transmission Line)\u003c\/em\u003e technology, which, combined with the \u003cem\u003eLaminairX™\u003c\/em\u003e system, eliminates port turbulence noise and ensures clean reproduction of the lowest frequencies. The PMC 10-4 SUB is driven by the external \u003cem\u003emaster36\u003c\/em\u003e system controller (or additional \u003cem\u003epower20\u003c\/em\u003e in extended setups), which integrates Class-D amplification (3600W total) with 32-bit SoundAlign2™ DSP processing. In an XBD configuration, adding a second module increases system headroom and allows for superior room acoustic control, which is critical in professional mastering and post-production studios.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFour 10-inch (250mm) bass drivers in a single cabinet\u003c\/li\u003e\n\u003cli\u003eNext-generation drivers with 36mm linear excursion\u003c\/li\u003e\n\u003cli\u003eATL™ (Advanced Transmission Line) technology for bass precision\u003c\/li\u003e\n\u003cli\u003eLaminairX™ system eliminates port turbulence\u003c\/li\u003e\n\u003cli\u003ePowered by master36 and power20 controllers (in XBD systems)\u003c\/li\u003e\n\u003cli\u003eFull integration with SoundAlign2™ digital ecosystem\u003c\/li\u003e\n\u003cli\u003eDesigned as the LF foundation for PMC10-4 or as an XBD module\u003c\/li\u003e\n\u003cli\u003eHand-built in the UK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDrivers: 4x 10” (250mm) Radial™ Drivers\u003c\/li\u003e\n\u003cli\u003eLoading Technology: ATL™ with LaminairX™ vent\u003c\/li\u003e\n\u003cli\u003eLinear Excursion: up to 36 mm (per driver)\u003c\/li\u003e\n\u003cli\u003ePower: Externally driven (master36 \/ power20)\u003c\/li\u003e\n\u003cli\u003eControl: Networked DSP SoundAlign2™\u003c\/li\u003e\n\u003cli\u003eApplication: LF section for PMC10-4, LFE, XBD\u003c\/li\u003e\n\u003cli\u003eConfiguration: Free-standing or soffit-mountable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"PMC","offers":[{"title":"Default Title","offer_id":52883679543633,"sku":"58833","price":39237.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/PMC10-4SUB1.jpg?v=1769180792"},{"product_id":"pmc-10-sub","title":"PMC 10 SUB - 10 inch Active Subwoofer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003ePMC 10 SUB\u003c\/strong\u003e is a compact yet highly efficient passive studio subwoofer designed as the foundation for smaller systems within the new Main Monitor Series, such as the PMC10. At its core is a next-generation, hand-built 10-inch (250mm) bass driver that delivers exceptional dynamic range and precision despite its smaller footprint. Featuring a triple-wound voice coil and dual-spider suspension, this driver achieves an impressive 36mm linear excursion, resulting in deep, controlled bass performance rarely found in a cabinet of this size.\u003c\/p\u003e\n\u003cp\u003eThe design utilizes the proven \u003cem\u003eAdvanced Transmission Line (ATL™)\u003c\/em\u003e technology, paired with the innovative \u003cem\u003eLaminairX™\u003c\/em\u003e vent system to eliminate port turbulence noise and ensure a linear bass response. The PMC 10 SUB is designed to operate with PMC's external controllers (master36 or power20), allowing for full integration with the SoundAlign2™ digital ecosystem. It offers flexible configuration options for multi-channel Dolby Atmos systems where space is at a premium but uncompromising audio quality is required.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e10-inch (250mm) passive studio subwoofer\u003c\/li\u003e\n\u003cli\u003eNext-generation driver with 36mm linear excursion\u003c\/li\u003e\n\u003cli\u003eATL™ (Advanced Transmission Line) technology for deep bass\u003c\/li\u003e\n\u003cli\u003eLaminairX™ aerodynamic vent eliminates turbulence\u003c\/li\u003e\n\u003cli\u003eCompatible with external master36 (3600W) and power20 (2000W) controllers\u003c\/li\u003e\n\u003cli\u003eIdeal for smaller control rooms and Dolby Atmos setups\u003c\/li\u003e\n\u003cli\u003eFull integration with SoundAlign2™ software\u003c\/li\u003e\n\u003cli\u003eHand-built in the UK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: 10” (250mm) Radial™ Driver with triple-wound coil\u003c\/li\u003e\n\u003cli\u003eLoading Technology: ATL™ with LaminairX™ vent\u003c\/li\u003e\n\u003cli\u003eLinear Excursion: 36 mm\u003c\/li\u003e\n\u003cli\u003eAmplification: Requires external controller (PMC master36\/power20)\u003c\/li\u003e\n\u003cli\u003eControl: Digital via SoundAlign2™ (Web Interface)\u003c\/li\u003e\n\u003cli\u003eApplication: LFE Subwoofer, Bass extension for PMC10\u003c\/li\u003e\n\u003cli\u003eConfiguration: Free-standing or soffit-mountable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"PMC","offers":[{"title":"Default Title","offer_id":52883679576401,"sku":"58825","price":18370.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/PMC10SUB1.jpg?v=1769180776"},{"product_id":"pmc-12-sub","title":"PMC 12 SUB - 12 inch Active Subwoofer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003ePMC 12 SUB\u003c\/strong\u003e is a high-performance passive studio subwoofer designed as the foundation for the new Main Monitor Series, including the PMC12 systems. It features a newly developed, hand-built 12-inch (300mm) bass driver that sets new standards for low-frequency precision and control. Thanks to its advanced design with a triple-wound voice coil and dual-spider suspension, the driver achieves an impressive linear excursion of 36mm, allowing for deep, distortion-free bass reproduction even at extreme sound pressure levels.\u003c\/p\u003e\n\u003cp\u003eThe subwoofer utilizes the flagship \u003cem\u003eAdvanced Transmission Line (ATL™)\u003c\/em\u003e technology, which, combined with the aerodynamic \u003cem\u003eLaminairX™\u003c\/em\u003e vent system, eliminates port turbulence noise. The PMC 12 SUB is designed to be driven by PMC's external controllers and amplifiers (such as the master36 or power20), ensuring full integration with the SoundAlign2™ digital ecosystem. Its modular design allows flexible configuration as either a standalone LFE subwoofer or an XBD extension for main monitors, increasing system headroom by 3 dB.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e12-inch (300mm) passive studio subwoofer\u003c\/li\u003e\n\u003cli\u003eNext-generation driver with 36mm linear excursion\u003c\/li\u003e\n\u003cli\u003eATL™ (Advanced Transmission Line) technology for precise bass\u003c\/li\u003e\n\u003cli\u003eLaminairX™ system for reduced port noise\u003c\/li\u003e\n\u003cli\u003eDesigned for external amplification (master36 \/ power20)\u003c\/li\u003e\n\u003cli\u003eFull integration with SoundAlign2™ digital management system\u003c\/li\u003e\n\u003cli\u003eIdeal for XBD configurations or as an LFE channel in Dolby Atmos\u003c\/li\u003e\n\u003cli\u003eHand-built in the UK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: 12” (300mm) Radial™ Driver with triple-wound coil\u003c\/li\u003e\n\u003cli\u003eLoading Technology: ATL™ with LaminairX™ vent\u003c\/li\u003e\n\u003cli\u003eLinear Excursion: Up to 36 mm\u003c\/li\u003e\n\u003cli\u003eAmplification: Requires external controller (PMC master36\/power20)\u003c\/li\u003e\n\u003cli\u003eFrequency Response: System DSP configuration dependent\u003c\/li\u003e\n\u003cli\u003eApplication: Main monitor bass extension, LFE\u003c\/li\u003e\n\u003cli\u003eConfiguration: Free-standing or soffit-mountable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"PMC","offers":[{"title":"Default Title","offer_id":52883679641937,"sku":"58830","price":24006.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/PMC12Sub1.jpg?v=1769180765"},{"product_id":"pmc-15-sub","title":"PMC 15 SUB - 15 inch Active Subwoofer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003ePMC 15 SUB\u003c\/strong\u003e is the flagship studio subwoofer designed as the foundation for the new Main Monitor Series, celebrating PMC's 35th anniversary. At the core of this powerful module lies a next-generation, hand-built 15-inch (380mm) bass driver featuring a triple-wound voice coil and dual-spider suspension. This engineering feat allows for an impressive linear excursion of 36mm—more than triple that of previous generations—delivering unprecedented control and natural low-frequency reproduction even at the highest output levels.\u003c\/p\u003e\n\u003cp\u003eThe subwoofer utilizes advanced \u003cem\u003eATL™ (Advanced Transmission Line)\u003c\/em\u003e loading technology paired with the new \u003cem\u003eLaminairX™\u003c\/em\u003e airflow system, which eliminates port turbulence noise and improves transient accuracy. The PMC 15 SUB is fully integrated into the SoundAlign2™ control ecosystem and driven by external \u003cem\u003emaster36\u003c\/em\u003e or \u003cem\u003epower20\u003c\/em\u003e control units, combining 32-bit DSP processing with massive Class-D amplification (up to 3600W total system power). Its modular design allows for flexible standalone or XBD configurations, making it perfect for modern Dolby Atmos music rooms and high-end post-production facilities.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFlagship 15-inch (380mm) passive subwoofer (externally powered)\u003c\/li\u003e\n\u003cli\u003eNext-gen driver with 36mm linear excursion\u003c\/li\u003e\n\u003cli\u003eATL™ (Advanced Transmission Line) technology for extended bass\u003c\/li\u003e\n\u003cli\u003eLaminairX™ airflow system eliminates port turbulence\u003c\/li\u003e\n\u003cli\u003ePowered by external master36 (3600W) or power20 (2000W) controllers\u003c\/li\u003e\n\u003cli\u003eFull integration with SoundAlign2™ software (Room Correction, EQ)\u003c\/li\u003e\n\u003cli\u003eConfigurable as a standalone subwoofer or XBD module\u003c\/li\u003e\n\u003cli\u003eHand-built in the UK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: 15” (380mm) Radial™ with triple-wound voice coil\u003c\/li\u003e\n\u003cli\u003eLoading Technology: ATL™ with LaminairX™ vent\u003c\/li\u003e\n\u003cli\u003eLinear Excursion: 36 mm\u003c\/li\u003e\n\u003cli\u003eFrequency Response: System dependent (DSP configured)\u003c\/li\u003e\n\u003cli\u003eAmplification: External (master36 \/ power20) - Class D\u003c\/li\u003e\n\u003cli\u003eControl: Networked via SoundAlign2™ (Web Interface)\u003c\/li\u003e\n\u003cli\u003eApplication: Main Monitor, LFE Subwoofer, Immersive Systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"PMC","offers":[{"title":"Default Title","offer_id":52883679707473,"sku":"58826","price":29962.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/PMC15SUB1.jpg?v=1769180744"},{"product_id":"pmc-10-sub-xbd","title":"PMC 10 SUB XBD - 10 inch Low-Frequency XBD Cabinet","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003ePMC 10 SUB XBD\u003c\/strong\u003e is a sophisticated 10-inch low-frequency cabinet designed as the foundation for the most compact systems in the new Main Monitor Series (such as the PMC10 XBD). Despite its smaller footprint, this module delivers powerful, reference-grade bass, serving as a critical extension for main monitors in small to medium-sized control rooms. At its heart is the new PMC 10-inch (250mm) \u003cem\u003eRadial™\u003c\/em\u003e bass driver, which, thanks to an optimized voice coil and motor assembly, offers exceptional speed, transient precision, and deep extension required for professional monitoring.\u003c\/p\u003e\n\u003cp\u003eThe subwoofer utilizes the legendary \u003cem\u003eAdvanced Transmission Line (ATL™)\u003c\/em\u003e technology, which, paired with the innovative \u003cem\u003eLaminairX™\u003c\/em\u003e vent system, eliminates turbulent air noise and ensures linear bass response even at high volume levels. The module is fully integrated into PMC's digital control ecosystem, powered by efficient Class-D amplification and managed via the advanced SoundAlign2™ interface. In an XBD configuration, adding this module increases the system's maximum SPL by 3 dB and significantly improves headroom, enabling full-dynamic performance in demanding stereo and Dolby Atmos applications.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDedicated XBD cabinet with a 10-inch (250mm) bass driver\u003c\/li\u003e\n\u003cli\u003eCompact footprint ideal for small to medium-sized studios\u003c\/li\u003e\n\u003cli\u003eATL™ (Advanced Transmission Line) technology for deep bass extension\u003c\/li\u003e\n\u003cli\u003eLaminairX™ aerodynamic vent eliminates port turbulence\u003c\/li\u003e\n\u003cli\u003eNew 10\" Radial™ driver with high power handling and precision\u003c\/li\u003e\n\u003cli\u003eFull integration with SoundAlign2™ management system\u003c\/li\u003e\n\u003cli\u003eIncreases system headroom and SPL by 3 dB in XBD configuration\u003c\/li\u003e\n\u003cli\u003eSuitable for soffit mounting or free-standing placement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: 10” (250mm) Radial™ Driver\u003c\/li\u003e\n\u003cli\u003eLoading Technology: ATL™ with LaminairX™ vent\u003c\/li\u003e\n\u003cli\u003eFrequency Response: Extends main system response (model dependent)\u003c\/li\u003e\n\u003cli\u003eAmplification: Dedicated Power module (configuration dependent)\u003c\/li\u003e\n\u003cli\u003eControl: Digital DSP with SoundAlign2™ network interface\u003c\/li\u003e\n\u003cli\u003eMax SPL: Increases main system output (up to \u0026gt;125 dB peak in XBD system)\u003c\/li\u003e\n\u003cli\u003eConnectivity: Analog \/ AES3, Ethernet (control)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"PMC","offers":[{"title":"Default Title","offer_id":52883679805777,"sku":"58835","price":11235.76,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/PMC10SUBXBD1.jpg?v=1769180730"},{"product_id":"pmc-12-sub-xbd","title":"PMC 12 SUB XBD - 12 inch Low-Frequency XBD Cabinet","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003ePMC 12 SUB XBD\u003c\/strong\u003e is a sophisticated 12-inch low-frequency cabinet designed to perfectly complement the new Main Monitor Series (such as the PMC12 XBD). Its primary role is to extend the system's frequency response and increase dynamic headroom in an XBD configuration. The design features a newly developed 300mm (12-inch) \u003cem\u003eRadial™\u003c\/em\u003e bass driver, which, thanks to an enhanced motor system and high-excursion voice coil, delivers extreme precision and control over low frequencies—essential for critical mixing and mastering environments.\u003c\/p\u003e\n\u003cp\u003eThe subwoofer utilizes the flagship \u003cem\u003eAdvanced Transmission Line (ATL™)\u003c\/em\u003e technology with an effective length of 3 meters. Paired with the aerodynamic \u003cem\u003eLaminairX™\u003c\/em\u003e vent, it eliminates port turbulence noise, ensuring clean, deep bass even at high SPLs. The module is fully integrated into the PMC ecosystem, powered by dedicated Class-D amplifiers controlled via advanced DSP and the SoundAlign2™ system. Adding an XBD cabinet increases the system's maximum sound pressure level by 3 dB below the crossover frequency, enabling effortless performance in larger control rooms.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDedicated XBD cabinet with a 12-inch bass driver\u003c\/li\u003e\n\u003cli\u003eIncreases system low-frequency headroom by 3 dB\u003c\/li\u003e\n\u003cli\u003eATL™ (Advanced Transmission Line) technology with 3m effective length\u003c\/li\u003e\n\u003cli\u003eLaminairX™ vent for reduced air turbulence noise\u003c\/li\u003e\n\u003cli\u003eNext-generation 12\" Radial™ high-excursion driver\u003c\/li\u003e\n\u003cli\u003eFull integration with SoundAlign2™ digital control system\u003c\/li\u003e\n\u003cli\u003ePowered by dedicated Class-D amplification modules (Power 1200\/2400)\u003c\/li\u003e\n\u003cli\u003eSuitable for soffit mounting or free-standing operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: 12” (300mm) Radial™ Driver\u003c\/li\u003e\n\u003cli\u003eLoading Technology: ATL™ with LaminairX™ vent\u003c\/li\u003e\n\u003cli\u003eEffective Line Length: 3 meters (9.8 ft)\u003c\/li\u003e\n\u003cli\u003eFrequency Response: Extends main system response down to approx. 20 Hz\u003c\/li\u003e\n\u003cli\u003eAmplification: System config dependent (up to 1200W per LF channel)\u003c\/li\u003e\n\u003cli\u003eMax SPL: Increases main system output (up to \u0026gt;129 dB peak)\u003c\/li\u003e\n\u003cli\u003eConnectivity: Analog \/ AES3, Ethernet (SoundAlign2)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"PMC","offers":[{"title":"Default Title","offer_id":52883679871313,"sku":"58839","price":16872.2,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/PMC12SUBXBD1.jpg?v=1769180707"},{"product_id":"pmc-15-sub-xbd","title":"PMC 15 SUB XBD - 15 inch Low-Frequency XBD Cabinet","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003ePMC 15 SUB XBD\u003c\/strong\u003e is an advanced 15-inch low-frequency cabinet designed as the foundation for the new Main Monitor Series (such as the PMC15 XBD). It serves to extend the dynamic range and frequency response of the main monitors, creating the powerful XBD configuration. At its core lies PMC's next-generation 380mm (15-inch) bass driver, featuring a triple-wound voice coil, vented motor assembly, and dual-spider suspension. This engineering marvel allows for an impressive linear excursion of 36mm (three times that of previous models), delivering massive yet ultra-precise low-end performance.\u003c\/p\u003e\n\u003cp\u003eThe cabinet utilizes the flagship \u003cem\u003eAdvanced Transmission Line (ATL™)\u003c\/em\u003e technology paired with the new \u003cem\u003eLaminairX™\u003c\/em\u003e aerodynamic vent system, which eliminates air turbulence at the outlet, ensuring sonic purity even at extreme volume levels. The module is fully integrated with PMC's digital control platform, utilizing powerful Class-D amplification and advanced DSP managed via the SoundAlign2™ interface. As a result, the PMC 15 SUB XBD offers not just infrasonic extension, but unprecedented control and integration for stereo and Dolby Atmos systems in the world's largest control rooms.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDedicated XBD cabinet for the new Main Monitor Series\u003c\/li\u003e\n\u003cli\u003eNext-gen 15-inch (380mm) driver with 36mm linear excursion\u003c\/li\u003e\n\u003cli\u003eATL™ (Advanced Transmission Line) technology for extended bass\u003c\/li\u003e\n\u003cli\u003eLaminairX™ airflow system eliminates port turbulence noise\u003c\/li\u003e\n\u003cli\u003ePowerful Class-D amplification controlled by advanced DSP\u003c\/li\u003e\n\u003cli\u003eFull integration with SoundAlign2™ management system\u003c\/li\u003e\n\u003cli\u003eIncreases system headroom and dynamics by 3-6 dB (in XBD config)\u003c\/li\u003e\n\u003cli\u003eSuitable for soffit-mounting or free-standing placement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: 15” (380mm) Radial™ with triple-wound voice coil\u003c\/li\u003e\n\u003cli\u003eLoading Technology: ATL™ with LaminairX™ vent\u003c\/li\u003e\n\u003cli\u003eEffective ATL™ Length: 4 meters (13 ft)\u003c\/li\u003e\n\u003cli\u003eFrequency Response: Extends system response down to ~17 Hz\u003c\/li\u003e\n\u003cli\u003eAmplification: Dedicated Power 1200 \/ 2400 module (config dependent)\u003c\/li\u003e\n\u003cli\u003eMax SPL: \u0026gt;131 dB (as part of XBD system)\u003c\/li\u003e\n\u003cli\u003eConnectivity: Analog \/ AES3, Ethernet (control)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"PMC","offers":[{"title":"Default Title","offer_id":52883679936849,"sku":"58831","price":22828.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/PMC15SUBXBD1.jpg?v=1769180693"},{"product_id":"telegrapher-hippo","title":"Telegrapher Hippo - 10 inch Active Subwoofer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eTelegrapher Hippo\u003c\/strong\u003e is an active 10-inch reference studio subwoofer designed to perfectly complement the new Raccoon and Panda monitors, as well as other nearfield and midfield systems. Like the rest of the new \"animal\" series, the Hippo utilizes a passive radiator design instead of a traditional ported enclosure. This approach eliminates port turbulence noise and delivers fast, controlled sub-bass with excellent transient definition, which is essential for critical studio monitoring.\u003c\/p\u003e\n\u003cp\u003eThe unit is driven by a powerful 250W Class-D amplifier, capable of producing a maximum sound pressure level (SPL) of 102 dB. The Hippo features a fully analog signal path, ensuring zero latency and avoiding phase discontinuities associated with digital processing. The rear panel offers a suite of professional integration tools, including a variable crossover (30–300 Hz), continuous phase control (0-180 degrees), and a polarity switch, allowing for precise alignment with satellite speakers and room acoustics.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e10-inch active reference subwoofer\u003c\/li\u003e\n\u003cli\u003ePassive radiator design for clean bass without port noise\u003c\/li\u003e\n\u003cli\u003e250W Class-D amplification\u003c\/li\u003e\n\u003cli\u003eFully analog signal path (zero latency)\u003c\/li\u003e\n\u003cli\u003eVariable crossover frequency (30 – 300 Hz)\u003c\/li\u003e\n\u003cli\u003eBalanced XLR inputs and outputs for monitor connection\u003c\/li\u003e\n\u003cli\u003eContinuous phase control (0-180°) and polarity switch\u003c\/li\u003e\n\u003cli\u003eAvailable in five unique color options\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWoofer: 10-inch\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 20 Hz – 300 Hz\u003c\/li\u003e\n\u003cli\u003eAmplifier Power: 250W (Class D)\u003c\/li\u003e\n\u003cli\u003eMax SPL: 102 dB (@ 1m)\u003c\/li\u003e\n\u003cli\u003eI\/O: 2x XLR In (L\/R), 2x XLR Out (L\/R - pass-through)\u003c\/li\u003e\n\u003cli\u003eControls: Crossover (30-300Hz), Phase, Polarity, Volume\u003c\/li\u003e\n\u003cli\u003eEnclosure: Sealed with passive radiator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"Telegrapher","offers":[{"title":"Default Title","offer_id":52883680166225,"sku":"58829","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/TelegrapherHippo1.jpg?v=1771352469"},{"product_id":"atc-scs140iw-pro-2x12","title":"ATC SCS140iW Pro 2x12 Dual - 12 inch Active In-Wall Subwoofer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eATC SCS140iW Pro\u003c\/strong\u003e is a high-output installation subwoofer featuring dual 12-inch (300 mm) drivers, designed as the perfect low-frequency companion for in-wall main monitors. Building on the success of the proven SCS70iW Pro, this new model doubles both the driver count and amplification, resulting in a significant 6 dB increase in maximum output capability. The subwoofer delivers an impressive 116 dB continuous and 121 dB peak SPL, all within a compact cabinet width that perfectly matches the SCM200AiW Pro main monitors for seamless visual integration.\u003c\/p\u003e\n\u003cp\u003eThe unit utilizes a sealed box design, ensuring fast, transient-accurate bass reproduction without the port noise or overhang often associated with reflex designs. The system is driven by two dedicated, remotely mounted R1-300 Pro Class A\/B amplifiers, providing a combined 600W of power. The SCS140iW Pro offers advanced system integration features, including analogue 4th order Linkwitz-Riley filters with multiple crossover settings (including industry-standard 80 Hz and bypass), continuously variable phase control, and a footswitch input for remote muting.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual 12-inch (300 mm) sealed-box installation subwoofer\u003c\/li\u003e\n\u003cli\u003eOptimized for flush mounting (In-Wall), matching SCM200AiW cabinet width\u003c\/li\u003e\n\u003cli\u003e6 dB output increase compared to the single-driver SCS70iW Pro\u003c\/li\u003e\n\u003cli\u003eIncludes two remote R1-300 Pro Class A\/B power amplifiers\u003c\/li\u003e\n\u003cli\u003eProprietary ATC drivers with short-coil motor and carbon-paper composite cone\u003c\/li\u003e\n\u003cli\u003eDeep, clean bass response extending below 20 Hz\u003c\/li\u003e\n\u003cli\u003eAnalogue 4th order Linkwitz-Riley filters with Bypass option\u003c\/li\u003e\n\u003cli\u003eRemote Mute function via footswitch and daisy-chain capability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDrivers: 2x 12\" (300 mm) ATC High-Excursion Driver\u003c\/li\u003e\n\u003cli\u003eFrequency Response: Below 20 Hz - 320 Hz (dependent on settings)\u003c\/li\u003e\n\u003cli\u003eAmplification: 2x 300 W (R1-300 Pro remote units)\u003c\/li\u003e\n\u003cli\u003eMax SPL: 116 dB (continuous), 121 dB (peak) @ 1m\u003c\/li\u003e\n\u003cli\u003eConnectivity: XLR In\/Out (on amp), NL4 Speaker connection\u003c\/li\u003e\n\u003cli\u003eLow Pass Filters: 50Hz, 65Hz, 80Hz, 320Hz\u003c\/li\u003e\n\u003cli\u003eMounting: Dedicated wall-mount enclosure with recessed input panel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"ATC","offers":[{"title":"Default Title","offer_id":52883680526673,"sku":"58832","price":9166.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/ATCSCS140iWPro2x121_66d59100-3460-4b6f-837c-378334b5be44.jpg?v=1769180985"},{"product_id":"atc-scs240iw-pro-2x15","title":"ATC SCS240iW Pro 2x15 Dual - 15 inch Active In-Wall Subwoofer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eATC SCS240iW Pro\u003c\/strong\u003e is a massive dual 15-inch active installation subwoofer designed for professional recording studios that demand uncompromising low-frequency performance. Engineered specifically for flush-mount (in-wall) applications, it saves valuable floor space while maintaining a clean studio aesthetic. Compared to single-driver models, the dual-driver configuration delivers a 6 dB increase in maximum sound pressure level, achieving an impressive 119 dB continuous and 126 dB peak output.\u003c\/p\u003e\n\u003cp\u003eThe system is driven by dedicated, remotely mounted R1-300 Pro amplifiers (configured to match the dual-driver load), combining Class A\/B precision with modern protection circuitry. The subwoofer utilizes proprietary ATC bass drivers optimized for ultra-low distortion and fast transient response. With comprehensive phase control, adjustable low-pass filters (which can be bypassed for external processing), and a footswitch input for instant muting, the SCS240iW Pro is the perfect companion for main monitors in stereo, surround, and Dolby Atmos immersive audio systems.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDual 15-inch active in-wall subwoofer system\u003c\/li\u003e\n\u003cli\u003eDesigned for flush-mount installation\u003c\/li\u003e\n\u003cli\u003eMaximum SPL: 119 dB continuous \/ 126 dB peak\u003c\/li\u003e\n\u003cli\u003eDedicated remote R1-300 Pro amplifiers (Class A\/B)\u003c\/li\u003e\n\u003cli\u003eProprietary ATC high-excursion bass drivers\u003c\/li\u003e\n\u003cli\u003eAdjustable Low Pass Filters (50Hz, 65Hz, 80Hz, 320Hz)\u003c\/li\u003e\n\u003cli\u003eContinuously variable Phase (0-180°) and Polarity switch\u003c\/li\u003e\n\u003cli\u003eRemote Mute function via latching footswitch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDrivers: 2x 15\" (375mm) ATC High-Excursion Woofer\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 22 Hz - 320 Hz (-6dB)\u003c\/li\u003e\n\u003cli\u003eAmplification: Remote R1-300 Pro units\u003c\/li\u003e\n\u003cli\u003eMax SPL: 119 dB (continuous), 126 dB (peak)\u003c\/li\u003e\n\u003cli\u003eConnectivity: XLR In\/Out (on amp), NL4 Speaker connection\u003c\/li\u003e\n\u003cli\u003eFilters: 4th Order Linkwitz-Riley\u003c\/li\u003e\n\u003cli\u003eMounting: Dedicated enclosure for wall integration\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"ATC","offers":[{"title":"Default Title","offer_id":52883680592209,"sku":"58845","price":12876.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/ATCSCS240iWPro2x151_2a979f3b-a507-472a-972c-f16f1a328d53.jpg?v=1769180997"},{"product_id":"eve-audio-ts107","title":"Eve Audio TS107 - 1-Way Studio Subwoofer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eEVE Audio TS107\u003c\/strong\u003e is the most compact active subwoofer in the ThunderStorm series, expertly engineered for small home studios, editing suites, and dedicated nearfield setups where space is strictly limited. Despite its incredibly small footprint, this \u003ca href=\"https:\/\/wrdtunes.com\/collections\/studio-monitors\"\u003estudio monitor\u003c\/a\u003e subwoofer provides exceptional low-end extension, perfectly complementing smaller satellite monitors (like the EVE SC203, SC204, or SC205). By handling the lowest frequencies, the TS107 effectively relieves the main monitors of extreme mechanical stress, which dramatically increases the overall system's headroom and allows the midrange and high frequencies to sound noticeably cleaner and more focused.\u003c\/p\u003e\n\u003cp\u003eAt the acoustic core of the \u003cstrong\u003eEVE Audio TS107\u003c\/strong\u003e sits a proprietary 6.5-inch woofer, driven by a highly efficient 100W (RMS) PWM Class-D amplifier. The standout feature of this subwoofer is its enclosure design: instead of relying on a traditional bass reflex tube, it utilizes a custom passive radiator mounted to the bottom of the cabinet, firing downwards. This advanced design physically eliminates audible air turbulence noises (port chuffing) and unwanted pipe resonances that frequently compromise the accuracy of smaller ported subs. The result is an incredibly tight, low-distortion bass response that reaches down to a precise 36 Hz with a maximum SPL of 102 dB.\u003c\/p\u003e\n\u003cp\u003eIn line with EVE Audio's philosophy, the TS107 integrates high-resolution DSP powered by premium Burr-Brown A\/D converters to meticulously manage the woofer's operation. However, a massive advantage of this system is that the audio path routed to your satellite speakers remains 100% analog—there is absolutely no extra A\/D or D\/A conversion applied to your main mix. The sub provides flexible tuning options, including a variable low-pass filter (60 - 140 Hz), a switchable high-pass filter for the satellites (Flat or 80 Hz), and phase inversion (0°\/180°). For ultimate convenience, it includes a wireless infrared remote control that allows users to seamlessly adjust both the subwoofer and total system volume straight from the sweet spot.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eUltra-compact active studio subwoofer providing an exceptional size-to-performance ratio\u003c\/li\u003e\n\u003cli\u003eInnovative downward-firing passive radiator totally eradicates port noise and pipe resonance\u003c\/li\u003e\n\u003cli\u003eProprietary 6.5-inch woofer delivers tight, highly accurate bass down to 36 Hz\u003c\/li\u003e\n\u003cli\u003eHigh-efficiency PWM (Class-D) amplifier outputting 100W of clean, reliable power\u003c\/li\u003e\n\u003cli\u003eDSP-controlled woofer management with an uncolored, purely analog signal path for satellites\u003c\/li\u003e\n\u003cli\u003eVariable subwoofer filter (60 - 140 Hz) and switchable satellite filter (80 Hz) for perfect integration\u003c\/li\u003e\n\u003cli\u003eDedicated LFE input and output channels for seamless integration into multi-channel setups\u003c\/li\u003e\n\u003cli\u003eIncludes a highly convenient infrared remote for adjusting system volumes from the listening position\u003c\/li\u003e\n\u003cli\u003eBuilt-in protection limiter and phase reversal switch (0°\/180°) for easy room alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnclosure Type: Closed with down-firing Passive Radiator\u003c\/li\u003e\n\u003cli\u003eFree-field Frequency Range (-3 dB): 36 Hz to 300 Hz\u003c\/li\u003e\n\u003cli\u003eWoofer Size: 165 mm (6.5 inches)\u003c\/li\u003e\n\u003cli\u003eMaximum SPL @ 1m: 102 dB\u003c\/li\u003e\n\u003cli\u003eOutput Power (Amplifier): 100 W (PWM \/ Class D)\u003c\/li\u003e\n\u003cli\u003eInput Level Switch: +7 dBu \/ +22 dBu\u003c\/li\u003e\n\u003cli\u003ePhase Adjustment: 0° \/ 180°\u003c\/li\u003e\n\u003cli\u003eSatellite Filter (High-pass): Flat \/ 80 Hz\u003c\/li\u003e\n\u003cli\u003eSubwoofer Filter (Low-pass): Variable 60 – 140 Hz + LFE\u003c\/li\u003e\n\u003cli\u003eInput Connectors: 3x Balanced XLR (Left, Right, LFE) 10 kOhms\u003c\/li\u003e\n\u003cli\u003eOutput Connectors: 3x Balanced XLR (Left, Right, LFE \/ Sub) 10 kOhms\u003c\/li\u003e\n\u003cli\u003eDimensions (W x H x D): 230 × 355 × 300 mm (9.06 x 13.98 x 11.81 inches)\u003c\/li\u003e\n\u003cli\u003eWeight: 8.2 kg (18.1 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"EVE AUDIO","offers":[{"title":"Default Title","offer_id":53155221176657,"sku":"953","price":540.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/EveAudioTS1071.jpg?v=1772444618"},{"product_id":"eve-audio-ts108","title":"Eve Audio TS108 - 1-Way Studio Subwoofer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eEVE Audio TS108\u003c\/strong\u003e (ThunderStorm series) is a highly articulate, 8-inch active \u003ca href=\"https:\/\/wrdtunes.com\/collections\/studio-monitors\"\u003estudio subwoofer\u003c\/a\u003e meticulously designed to flawlessly extend the low-frequency response of your nearfield monitoring setup. Engineered to be the perfect companion for smaller EVE SilverCone monitors (like the SC204, SC205, and SC207), this subwoofer relieves your main speakers from the exhausting task of reproducing massive low-end transients. This division of labor vastly improves the dynamic range, overall headroom, and midrange clarity of your satellites. The TS108 seamlessly integrates into your system, creating a cohesive, full-range listening environment that reaches down to a highly accurate 33 Hz.\u003c\/p\u003e\n\u003cp\u003eThe most striking technological advancement of the \u003cstrong\u003eEVE Audio TS108\u003c\/strong\u003e is its complete abandonment of the traditional bass-reflex tube in favor of a custom passive radiator. Mounted on the bottom of the compact cabinet and firing downwards, this highly efficient design completely eradicates the audible air turbulence noises (port chuffing) and disruptive pipe resonances that frequently plague standard ported subwoofers. Furthermore, it significantly minimizes unwanted subsonic excursions and intermodulation distortion. Powered by a robust, highly efficient 150W PWM (Class-D) amplifier, the proprietary 8-inch woofer delivers tight, punchy, and distortion-free bass with a maximum sound pressure level of 105 dB.\u003c\/p\u003e\n\u003cp\u003eSignal management is precisely handled by a high-resolution DSP engine powered by premium Burr-Brown A\/D converters. Crucially, the DSP processing only affects the subwoofer itself—the signal passed through to the satellite monitors remains completely analog, ensuring your mix is never subjected to unnecessary A\/D\/A conversion. The unit features comprehensive, user-friendly controls: a switchable satellite filter (Full Range or 80Hz), phase inversion (0°\/180°), and highly variable crossover frequencies (60Hz to 140Hz) plus a dedicated LFE channel for film production. Adding immense convenience, the TS108 includes a wireless infrared remote control, allowing you to fine-tune both the sub and the master system volume directly from your mix position.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHighly articulate 8-inch active studio subwoofer driven by a 150W PWM amplifier\u003c\/li\u003e\n\u003cli\u003eInnovative down-firing passive radiator design completely eliminates port turbulence noise\u003c\/li\u003e\n\u003cli\u003eExceptional low-frequency extension down to 33 Hz with high acoustic output (105 dB SPL)\u003c\/li\u003e\n\u003cli\u003eHigh-resolution DSP filtering affects only the sub, keeping satellite signals purely analog\u003c\/li\u003e\n\u003cli\u003eVariable subwoofer low-pass filter (60Hz to 140Hz) alongside a dedicated LFE setting\u003c\/li\u003e\n\u003cli\u003eSwitchable high-pass filter (80 Hz) for seamless acoustic integration with satellite monitors\u003c\/li\u003e\n\u003cli\u003ePhase inversion switch (0° \/ 180°) for perfect time alignment with your main speakers\u003c\/li\u003e\n\u003cli\u003eIncludes a convenient infrared remote control to adjust volume levels from the sweet spot\u003c\/li\u003e\n\u003cli\u003eBuilt-in protection limiter and parameter-lock dip switches to secure your settings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnclosure Type: Closed with down-firing Passive Radiator\u003c\/li\u003e\n\u003cli\u003eFree-field Frequency Range (-3 dB): 33 Hz to 300 Hz\u003c\/li\u003e\n\u003cli\u003eWoofer Size: 195 mm (8 inches)\u003c\/li\u003e\n\u003cli\u003eMaximum SPL @ 1m: 105 dB\u003c\/li\u003e\n\u003cli\u003eOutput Power (Amplifier): 150 W (PWM \/ Class D)\u003c\/li\u003e\n\u003cli\u003eInput Level Dip Switch: +7 dBu \/ +22 dBu\u003c\/li\u003e\n\u003cli\u003ePhase Adjustment: 0° \/ 180°\u003c\/li\u003e\n\u003cli\u003eSatellite Filter (High-pass): Flat \/ 80 Hz\u003c\/li\u003e\n\u003cli\u003eSubwoofer Filter (Low-pass): Variable 60 – 140 Hz + LFE\u003c\/li\u003e\n\u003cli\u003eInput Connectors: 3x Balanced XLR (Left, Right, LFE) 10 kOhms\u003c\/li\u003e\n\u003cli\u003eOutput Connectors: 3x Balanced XLR (Left, Right, LFE \/ Sub) 10 kOhms\u003c\/li\u003e\n\u003cli\u003eDimensions (W x H x D): 280 × 415 × 365 mm (11.02 x 16.34 x 14.37 inches)\u003c\/li\u003e\n\u003cli\u003eWeight: 11.5 kg (25.3 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"EVE AUDIO","offers":[{"title":"Default Title","offer_id":53155221504337,"sku":"954","price":783.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/EveAudioTS1081.jpg?v=1772444608"},{"product_id":"eve-audio-ts110","title":"Eve Audio TS110 - 1-Way Studio Subwoofer","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003eThe \u003cstrong\u003eEVE Audio TS110\u003c\/strong\u003e (part of the ThunderStorm series) is a professional, high-performance 10-inch active \u003ca href=\"https:\/\/wrdtunes.com\/collections\/studio-monitors\"\u003estudio subwoofer\u003c\/a\u003e designed to flawlessly extend the low-frequency response of your monitoring setup. Built to integrate perfectly with EVE's SilverCone monitors (such as the SC207, SC208, and SC307), this subwoofer relieves your main nearfield monitors from the demanding task of reproducing extreme low-end. This separation vastly improves the dynamic range, headroom, and clarity of the midrange and high frequencies. More than just adding bass, the TS110 ensures your entire monitoring chain acts as a cohesive, single acoustic entity down to a thunderous 28 Hz.\u003c\/p\u003e\n\u003cp\u003eA defining technological feature of the \u003cstrong\u003eEVE Audio TS110\u003c\/strong\u003e is its use of a passive radiator, mounted on the bottom of the cabinet firing towards the floor, instead of a traditional bass-reflex tube. This highly efficient design completely eradicates audible air turbulence noises (port chuffing) and disruptive pipe resonances that plague standard ported subwoofers. Furthermore, it significantly minimizes subsonic excursions and intermodulation distortion. Powered by a highly efficient 400W PWM (Class-D) amplifier, this custom 10-inch woofer delivers tight, punchy, and incredibly accurate low-end with a maximum sound pressure level of 108 dB, all within a surprisingly compact footprint.\u003c\/p\u003e\n\u003cp\u003eSignal management is handled by a high-resolution DSP engine powered by top-tier Burr-Brown A\/D converters. Crucially, the DSP processing only affects the subwoofer itself—the signal passed through to the satellite monitors remains completely analog, ensuring your pristine mix is never unnecessarily digitized twice. The unit features comprehensive controls: a switchable satellite filter (Full Range or 80Hz), phase inversion (0°\/180°), and highly variable crossover frequencies (60Hz to 140Hz) plus a dedicated LFE mode for cinematic post-production. Adding immense convenience, the TS110 comes with a wireless infrared remote control, allowing you to adjust both the sub and the total system volume directly from your listening sweet spot.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePowerful 10-inch active studio subwoofer driven by a highly efficient 400W amplifier\u003c\/li\u003e\n\u003cli\u003eInnovative passive radiator design completely eliminates port turbulence and resonance noise\u003c\/li\u003e\n\u003cli\u003eExceptional low-frequency extension down to 28 Hz with high output (108 dB SPL)\u003c\/li\u003e\n\u003cli\u003eHigh-resolution DSP filtering affects only the sub, keeping satellite signals purely analog\u003c\/li\u003e\n\u003cli\u003eVariable subwoofer low-pass filter (60Hz to 140Hz) alongside a dedicated LFE channel setting\u003c\/li\u003e\n\u003cli\u003eSwitchable high-pass filter (80 Hz) for seamless integration with satellite monitors\u003c\/li\u003e\n\u003cli\u003ePhase inversion switch (0° \/ 180°) for perfect time alignment with your main speakers\u003c\/li\u003e\n\u003cli\u003eIncludes an infrared remote control to adjust volume levels straight from the sweet spot\u003c\/li\u003e\n\u003cli\u003eBuilt-in protection limiter and \"soft start\" feature to protect your ears and equipment\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eEnclosure Type: Closed with down-firing Passive Radiator\u003c\/li\u003e\n\u003cli\u003eFree-field Frequency Range (-3 dB): 28 Hz to 300 Hz\u003c\/li\u003e\n\u003cli\u003eWoofer Size: 250 mm (10 inches)\u003c\/li\u003e\n\u003cli\u003eMaximum SPL @ 1m: 108 dB\u003c\/li\u003e\n\u003cli\u003eOutput Power (Amplifier): 400 W (PWM)\u003c\/li\u003e\n\u003cli\u003eInput Level Dip Switch: +7 dBu \/ +22 dBu\u003c\/li\u003e\n\u003cli\u003ePhase Adjustment: 0° \/ 180°\u003c\/li\u003e\n\u003cli\u003eSatellite Filter (High-pass): Flat \/ 80 Hz\u003c\/li\u003e\n\u003cli\u003eSubwoofer Filter (Low-pass): Variable 60 – 140 Hz + LFE\u003c\/li\u003e\n\u003cli\u003eInput Connectors: 3x Balanced XLR (Left, Right, LFE)\u003c\/li\u003e\n\u003cli\u003eOutput Connectors: 3x Balanced XLR (Left, Right, LFE)\u003c\/li\u003e\n\u003cli\u003eDimensions (W x H x D): 330 × 485 × 430 mm (13 x 19.1 x 16.9 inches)\u003c\/li\u003e\n\u003cli\u003eWeight: 19.6 kg (43.2 lbs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"EVE AUDIO","offers":[{"title":"Default Title","offer_id":53155222946129,"sku":"928","price":987.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/EveAudioTS1101.jpg?v=1772444564"},{"product_id":"ex-machina-gravity","title":"Ex Machina Gravity","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eEx Machina Gravity\u003c\/strong\u003e is a dedicated passive \u003ca href=\"https:\/\/wrdtunes.com\/collections\/studio-monitors\"\u003estudio monitor\u003c\/a\u003e subwoofer pair explicitly engineered to function as a seamless low-frequency extension for the Ex Machina Terra active monitoring system. Rather than providing a generic bass add-on that requires tuning, Gravity integrates as a mathematically unified 2.2 architecture. It draws power directly from the Terra’s rear-panel amplification and relies exclusively on Terra's internal DSP for system-wide calibration. This closed-loop approach completely eradicates the need for external amplifiers, complex bass management processors, and unpredictable phase-alignment procedures.\u003c\/p\u003e\n\n\u003ch3 style=\"text-align: center;\"\u003eZero-Phase Bass Management\u003c\/h3\u003e\n\u003cp\u003ePairing full-range nearfield monitors with independent subwoofers routinely introduces transient smearing and massive group delay at the crossover region. The Gravity system circumvents these classic acoustic hurdles by employing a zero-phase LR4 digital crossover flawlessly tuned at 80 Hz, calculated natively by the Terra’s onboard DSP. This guarantees a surgically tight, time-aligned low-end response while significantly boosting the overall system headroom up to 112 dB at 1 kHz. Once connected, the combined configuration performs with the effortless authority of massive far-field monitors, extending the linear frequency response down to a tactile 30 Hz (F6 cutoff at 20 Hz).\u003c\/p\u003e\n\n\u003ch3 style=\"text-align: center;\"\u003eSide-Firing PuriFi Precision\u003c\/h3\u003e\n\u003cp\u003eAt the acoustic core of each Gravity cabinet is a premium 10-inch (26cm) PuriFi woofer, a driver renowned for its vanishingly low THD and massive linear excursion capabilities. To minimize room-mode excitation and facilitate placement in dimensionally restricted control rooms, the subwoofers utilize a highly efficient, side-firing enclosure design. This extremely compact 12-inch depth allows for precise nearfield positioning right alongside the Terra monitors, perfectly preserving stereo bass imaging. Furthermore, integrated 200x200 VESA mounting points render the Gravity cabinets fully compatible with heavy-duty on-wall rigging for advanced immersive workflows.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDedicated passive subwoofer pair engineered exclusively to expand the Ex Machina Terra monitoring ecosystem.\u003c\/li\u003e\n\u003cli\u003ePowered, crossed over, and perfectly phase-aligned directly by the Terra's rear-panel electronics and DSP module.\u003c\/li\u003e\n\u003cli\u003ePremium 10-inch PuriFi woofer within each cabinet delivers incredibly low harmonic distortion at high SPLs.\u003c\/li\u003e\n\u003cli\u003eZero-phase digital LR4 crossover natively set at 80 Hz entirely eliminates low-frequency transient smearing.\u003c\/li\u003e\n\u003cli\u003eSide-firing, shallow-depth enclosure design optimizes nearfield stereo imaging while limiting room-mode excitation.\u003c\/li\u003e\n\u003cli\u003eEquipped with industry-standard VESA 200x200 mounting points for flexible integration, including on-wall Dolby Atmos arrays.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAcoustic Design: Passive subwoofer pair operating in a side-firing 2.2 system architecture.\u003c\/li\u003e\n\u003cli\u003eDrivers: 10\" (26cm) premium PuriFi low-frequency transducer per individual cabinet.\u003c\/li\u003e\n\u003cli\u003eCrossover: 80 Hz zero-phase LR4 digital filter (natively calculated and managed by Terra DSP).\u003c\/li\u003e\n\u003cli\u003eSystem Frequency Response (paired with Terra): Linear down to 30 Hz (F6 cutoff point extending to 20 Hz).\u003c\/li\u003e\n\u003cli\u003eMaximum System SPL: 112 dB @ 1 kHz \/ 106 dB @ 50 Hz.\u003c\/li\u003e\n\u003cli\u003eDimensions: 12\" H x 8.5\" W x 12\" D (305 x 215 x 305 mm) per subwoofer cabinet.\u003c\/li\u003e\n\u003cli\u003eWeight: 45 lbs (20.4 kg) per subwoofer unit.\u003c\/li\u003e\n\u003cli\u003eMounting Infrastructure: Integrated 200 x 200 VESA hard points (M6 hardware).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Ex Machina Soundworks","offers":[{"title":"Default Title","offer_id":53476961976657,"sku":"59426","price":4218.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/ExMachinaGravity1.jpg?v=1775728933"},{"product_id":"ex-machina-poseidon","title":"Ex Machina Poseidon","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eEx Machina Poseidon\u003c\/strong\u003e is a premium passive \u003ca href=\"https:\/\/wrdtunes.com\/collections\/studio-monitors\"\u003estudio monitor\u003c\/a\u003e subwoofer (sold as a matched pair) engineered strictly as a dedicated low-frequency extension for the Ex Machina Selene monitoring system. Rather than serving as a generic add-on, it functions as an acoustic component fully integrated into the EXCore DSP architecture. This specific configuration offloads sub-bass duties from the main coaxial drivers without sacrificing phase coherence, effectively transforming the two-way Selene into a true, compact three-way system built for critical stereo mixing and complex Dolby Atmos configurations.\u003c\/p\u003e\n\n\u003ch3 style=\"text-align: center;\"\u003ePhase-Coherent Bass Without the Guesswork\u003c\/h3\u003e\n\u003cp\u003ePairing nearfield monitors with third-party subwoofers regularly introduces transient smearing, group delay, and time-alignment issues at the crossover region. The Poseidon circumvents classic bass-management headaches by utilizing a zero-phase LR4 crossover at 150Hz, calculated natively by the Selene’s external EXCore amplifier\/DSP module. This proprietary routing grants audio engineers a surgically tight low-end response, hyper-accurate stereo bass imaging, and a massive increase in overall system headroom.\u003c\/p\u003e\n\n\u003ch3 style=\"text-align: center;\"\u003eExtreme Excursion in a Micro Footprint\u003c\/h3\u003e\n\u003cp\u003eBuilt around a custom 6.3-inch Epique MMAG driver boasting an immense 14.7mm of linear excursion in each direction, the Poseidon delivers articulate, deep bass output reaching up to 98dB of continuous SPL at 50Hz. Crucially, this extension is generated from an ultra-rigid, acoustically inert 6.5-inch extruded aluminum cube. Such a compact footprint allows for seamless physical deployment into space-constrained control rooms, editing suites, and dense multi-channel immersive arrays without obstructing sightlines or creating comb-filtering reflections off consoles.\u003c\/p\u003e\n\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePurpose-built low-frequency extension pair exclusively designed for the Ex Machina Selene monitor system.\u003c\/li\u003e\n\u003cli\u003ePowered and processed entirely via the Selene's external EXCore DSP and amplifier module.\u003c\/li\u003e\n\u003cli\u003eTransforms a two-way coaxial setup into a fully integrated, zero-phase three-way monitoring solution.\u003c\/li\u003e\n\u003cli\u003eNative zero-phase LR4 crossover integration at 150Hz to eliminate timing anomalies and transient smearing.\u003c\/li\u003e\n\u003cli\u003eHoused in an incredibly rigid, resonance-free 6.5-inch sealed aluminum extrusion cabinet.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDriver: 6.3\" Epique MMAG (14.7mm Xmax per direction).\u003c\/li\u003e\n\u003cli\u003eFrequency Response: Linear down to 50Hz, F6 cutoff at 35Hz.\u003c\/li\u003e\n\u003cli\u003eMaximum SPL: 98dB continuous (measured at 50Hz).\u003c\/li\u003e\n\u003cli\u003eCrossover: 150Hz (Zero-phase digital LR4).\u003c\/li\u003e\n\u003cli\u003eEnclosure Type: Passive, sealed, extruded aluminum cube.\u003c\/li\u003e\n\u003cli\u003eDimensions: 6.5\" x 6.5\" x 6.5\" (each unit).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Ex Machina Soundworks","offers":[{"title":"Default Title","offer_id":53476962435409,"sku":"59433","price":1054.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/ExMachinaPoseidon1.jpg?v=1775728805"},{"product_id":"telegrapher-elephant-crow-black","title":"Telegrapher Elephant Crow Black","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eTelegrapher Elephant Crow Black\u003c\/strong\u003e is an active analog studio subwoofer in a sealed enclosure — the Crow Black color variant with a premium soft-touch silky matte finish. A 32 cm (12.5\") paper sandwich woofer with patented foam-filled cone, two bridged Class D amplifiers (2 × 500 W), and a fully analog signal path from input to driver. User-adjustable crossover from 30 to 300 Hz, 0–360° phase control, and two XLR inputs with two pass-through outputs allow integration into any studio monitor pair without an external patchbay. Weight 38 kg, dimensions 430 × 440 × 525 mm.\u003c\/p\u003e\n\n  \u003ch3\u003eSealed Enclosure and All-Analog Signal Path\u003c\/h3\u003e\n  \u003cp\u003ePorted subwoofers generate port noise — audible air turbulence at high SPL that obscures bass definition and makes individual low-frequency notes harder to distinguish. The Elephant's sealed enclosure eliminates port noise entirely: the low end is even, controlled, and transient-fast — sealed alignments respond quicker to input changes than ported designs, meaning kick drum impacts and electric bass lines are individually legible under a mix. The analog signal path with no D\/A conversion preserves the tonal character and dynamic range of the main monitors — the Elephant is an extension of the signal chain, not an independent digital processor. The –3 dB point is at 41.7 Hz and the –6 dB point at 31.7 Hz, covering the full 20–300 Hz studio subwoofer range.\u003c\/p\u003e\n\n  \u003ch3\u003eStereo Routing, Crossover Adjustment and Protection\u003c\/h3\u003e\n  \u003cp\u003eTwo balanced XLR inputs (or unbalanced RCA) with parallel pass-through outputs allow the Elephant to be inserted between a console or interface and the main monitor pair without interrupting the original signal path. When both channels are connected, the subwoofer sums them to mono internally ahead of the low-pass filter. The continuously adjustable crossover (30–300 Hz, second-order LP) and 0–360° phase control provide precise integration calibration with any monitor pair. Protection circuits trigger an immediate amplifier shutdown on detection of high-frequency signals (microphone feedback), overheating, or electrical fault — indicated by a red LED. White LED = normal operation; red flashing = audio clipping; steady red = protection shutdown. A user-configurable standby timer turns the amplifiers off after 120 minutes of inactivity.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eActive analog studio subwoofer — sealed enclosure, fully analog signal path\u003c\/li\u003e\n    \u003cli\u003eColor: Crow Black — premium soft-touch silky matte finish\u003c\/li\u003e\n    \u003cli\u003eDriver: 32 cm \/ 12.5\" — patented paper sandwich cone with foam filling\u003c\/li\u003e\n    \u003cli\u003eAmplifier: 2 × 500 W Class D (bridged), THD+N 0.0018%\u003c\/li\u003e\n    \u003cli\u003eContinuous RMS power: 480 W; peak power: 1200 W\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 20–300 Hz; f3: 41.7 Hz; f6: 31.7 Hz\u003c\/li\u003e\n    \u003cli\u003ePeak SPL: 110.5 dB at 1 meter\u003c\/li\u003e\n    \u003cli\u003eCrossover: active analog, user-adjustable 30–300 Hz, second-order LP\u003c\/li\u003e\n    \u003cli\u003ePhase control: 0–360° (continuously variable)\u003c\/li\u003e\n    \u003cli\u003eInputs: 2 × balanced XLR or 2 × unbalanced RCA (sums to mono when both connected)\u003c\/li\u003e\n    \u003cli\u003ePass-through outputs: 2 × balanced XLR or 2 × unbalanced RCA (always active)\u003c\/li\u003e\n    \u003cli\u003eProtection: auto-shutdown on HF signal, overheating or electrical fault; LED indicator (white\/red)\u003c\/li\u003e\n    \u003cli\u003eStandby: user-configurable (auto-off after 120 minutes)\u003c\/li\u003e\n    \u003cli\u003ePower: 110–240 V AC, 47–63 Hz; IEC 10A connector\u003c\/li\u003e\n    \u003cli\u003eDimensions: 430 × 440 × 525 mm (H × W × D) + 30 mm heatsink\u003c\/li\u003e\n    \u003cli\u003eWeight: 38 kg\u003c\/li\u003e\n    \u003cli\u003eAvailable colors: Crow Black, Telegrapher Gray, Jaipur Orange, Menton Yellow, Trooper White\u003c\/li\u003e\n    \u003cli\u003eManufacturer: Telegrapher Loudspeakers\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: active analog subwoofer, sealed enclosure\u003c\/li\u003e\n    \u003cli\u003eDriver: 32 cm \/ 12.5\" — paper sandwich cone, patented foam filling\u003c\/li\u003e\n    \u003cli\u003eAmplifier type: Class D (2 × bridged)\u003c\/li\u003e\n    \u003cli\u003eAmplifier power: 2 × 500 W\u003c\/li\u003e\n    \u003cli\u003eContinuous RMS power: 480 W; peak power: 1200 W\u003c\/li\u003e\n    \u003cli\u003eAmplifier THD+N: 0.0018%\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 20–300 Hz\u003c\/li\u003e\n    \u003cli\u003ef3: 41.7 Hz; f6: 31.7 Hz\u003c\/li\u003e\n    \u003cli\u003ePeak SPL: 110.5 dB (1 m)\u003c\/li\u003e\n    \u003cli\u003eCrossover: active analog, adjustable 30–300 Hz, 2nd order LP\u003c\/li\u003e\n    \u003cli\u003ePhase control: 0–360°\u003c\/li\u003e\n    \u003cli\u003eInput: 2 × balanced XLR or 2 × RCA\u003c\/li\u003e\n    \u003cli\u003ePass-through output: 2 × balanced XLR or 2 × RCA\u003c\/li\u003e\n    \u003cli\u003ePower: 110–240 V AC, 47–63 Hz, IEC 10A\u003c\/li\u003e\n    \u003cli\u003eDimensions: 430 × 440 × 525 mm (H × W × D) + 30 mm heatsink\u003c\/li\u003e\n    \u003cli\u003eWeight: 38 kg\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Telegrapher","offers":[{"title":"Default Title","offer_id":54001019879761,"sku":"60245","price":5875.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/TelegrapherElephantCrowBlack1.jpg?v=1781115413"},{"product_id":"telegrapher-elephant-trooper-white","title":"Telegrapher Elephant Trooper White","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eTelegrapher Elephant Trooper White\u003c\/strong\u003e is an active analog studio subwoofer in a sealed enclosure — the Trooper White color variant with a premium soft-touch silky matte finish. A 32 cm (12.5\") paper sandwich woofer with patented foam-filled cone, two bridged Class D amplifiers (2 × 500 W), and a fully analog signal path from input to driver. User-adjustable crossover from 30 to 300 Hz, 0–360° phase control, and two XLR inputs with two pass-through outputs allow integration into any studio monitor pair without an external patchbay. Weight 38 kg, dimensions 430 × 440 × 525 mm.\u003c\/p\u003e\n\n  \u003ch3\u003eSealed Enclosure and All-Analog Signal Path\u003c\/h3\u003e\n  \u003cp\u003ePorted subwoofers generate port noise — audible air turbulence at high SPL that obscures bass definition and makes individual low-frequency notes harder to distinguish. The Elephant's sealed enclosure eliminates port noise entirely: the low end is even, controlled, and transient-fast — sealed alignments respond quicker to input changes than ported designs, meaning kick drum impacts and electric bass lines are individually legible under a mix. The analog signal path with no D\/A conversion preserves the tonal character and dynamic range of the main monitors — the Elephant is an extension of the signal chain, not an independent digital processor. The –3 dB point is at 41.7 Hz and the –6 dB point at 31.7 Hz, covering the full 20–300 Hz studio subwoofer range.\u003c\/p\u003e\n\n  \u003ch3\u003eStereo Routing, Crossover Adjustment and Protection\u003c\/h3\u003e\n  \u003cp\u003eTwo balanced XLR inputs (or unbalanced RCA) with parallel pass-through outputs allow the Elephant to be inserted between a console or interface and the main monitor pair without interrupting the original signal path. When both channels are connected, the subwoofer sums them to mono internally ahead of the low-pass filter. The continuously adjustable crossover (30–300 Hz, second-order LP) and 0–360° phase control provide precise integration calibration with any monitor pair. Protection circuits trigger an immediate amplifier shutdown on detection of high-frequency signals (microphone feedback), overheating, or electrical fault — indicated by a red LED. White LED = normal operation; red flashing = audio clipping; steady red = protection shutdown. A user-configurable standby timer turns the amplifiers off after 120 minutes of inactivity.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eActive analog studio subwoofer — sealed enclosure, fully analog signal path\u003c\/li\u003e\n    \u003cli\u003eColor: Trooper White — premium soft-touch silky matte finish\u003c\/li\u003e\n    \u003cli\u003eDriver: 32 cm \/ 12.5\" — patented paper sandwich cone with foam filling\u003c\/li\u003e\n    \u003cli\u003eAmplifier: 2 × 500 W Class D (bridged), THD+N 0.0018%\u003c\/li\u003e\n    \u003cli\u003eContinuous RMS power: 480 W; peak power: 1200 W\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 20–300 Hz; f3: 41.7 Hz; f6: 31.7 Hz\u003c\/li\u003e\n    \u003cli\u003ePeak SPL: 110.5 dB at 1 meter\u003c\/li\u003e\n    \u003cli\u003eCrossover: active analog, user-adjustable 30–300 Hz, second-order LP\u003c\/li\u003e\n    \u003cli\u003ePhase control: 0–360° (continuously variable)\u003c\/li\u003e\n    \u003cli\u003eInputs: 2 × balanced XLR or 2 × unbalanced RCA (sums to mono when both connected)\u003c\/li\u003e\n    \u003cli\u003ePass-through outputs: 2 × balanced XLR or 2 × unbalanced RCA (always active)\u003c\/li\u003e\n    \u003cli\u003eProtection: auto-shutdown on HF signal, overheating or electrical fault; LED indicator (white\/red)\u003c\/li\u003e\n    \u003cli\u003eStandby: user-configurable (auto-off after 120 minutes)\u003c\/li\u003e\n    \u003cli\u003ePower: 110–240 V AC, 47–63 Hz; IEC 10A connector\u003c\/li\u003e\n    \u003cli\u003eDimensions: 430 × 440 × 525 mm (H × W × D) + 30 mm heatsink\u003c\/li\u003e\n    \u003cli\u003eWeight: 38 kg\u003c\/li\u003e\n    \u003cli\u003eAvailable colors: Crow Black, Telegrapher Gray, Jaipur Orange, Menton Yellow, Trooper White\u003c\/li\u003e\n    \u003cli\u003eManufacturer: Telegrapher Loudspeakers\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: active analog subwoofer, sealed enclosure\u003c\/li\u003e\n    \u003cli\u003eDriver: 32 cm \/ 12.5\" — paper sandwich cone, patented foam filling\u003c\/li\u003e\n    \u003cli\u003eAmplifier type: Class D (2 × bridged)\u003c\/li\u003e\n    \u003cli\u003eAmplifier power: 2 × 500 W\u003c\/li\u003e\n    \u003cli\u003eContinuous RMS power: 480 W; peak power: 1200 W\u003c\/li\u003e\n    \u003cli\u003eAmplifier THD+N: 0.0018%\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 20–300 Hz\u003c\/li\u003e\n    \u003cli\u003ef3: 41.7 Hz; f6: 31.7 Hz\u003c\/li\u003e\n    \u003cli\u003ePeak SPL: 110.5 dB (1 m)\u003c\/li\u003e\n    \u003cli\u003eCrossover: active analog, adjustable 30–300 Hz, 2nd order LP\u003c\/li\u003e\n    \u003cli\u003ePhase control: 0–360°\u003c\/li\u003e\n    \u003cli\u003eInput: 2 × balanced XLR or 2 × RCA\u003c\/li\u003e\n    \u003cli\u003ePass-through output: 2 × balanced XLR or 2 × RCA\u003c\/li\u003e\n    \u003cli\u003ePower: 110–240 V AC, 47–63 Hz, IEC 10A\u003c\/li\u003e\n    \u003cli\u003eDimensions: 430 × 440 × 525 mm (H × W × D) + 30 mm heatsink\u003c\/li\u003e\n    \u003cli\u003eWeight: 38 kg\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Telegrapher","offers":[{"title":"Default Title","offer_id":54001019945297,"sku":"60246","price":5875.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/TelegrapherElephantTrooperWhite.jpg?v=1781115404"},{"product_id":"eve-audio-ts112","title":"Eve Audio TS112","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eEve Audio TS112 — \u003c\/strong\u003ean active studio subwoofer featuring a proprietary 12\" woofer, a 400 W PWM amplifier, and a passive radiator design instead of a bass reflex port, delivering a frequency response from 24 Hz to 300 Hz at a maximum SPL of 112 dB at 1 m, with a wireless remote for full system volume control from the listening position.\u003c\/p\u003e\n\u003cp\u003eThe problem with bass reflex ports in a studio monitoring context is well established: airflow through the port generates turbulence noise audible at high levels, and standing-wave resonances at harmonics of the port length colour the pass band in ways no equaliser can fully correct. The TS112 addresses this structurally: a passive radiator — a diaphragm without a voice coil — replaces the port, removing both turbulence noise and pipe resonances. The radiator's suspension acts as a restoring force below the tuning frequency, reducing subsonic excursions and resulting intermodulation distortion in the working range, while allowing a lower tuning frequency in a more compact cabinet than a reflex design of equivalent output.\u003c\/p\u003e\n\u003ch3\u003eIntegration with Any Monitor System\u003c\/h3\u003e\n\u003cp\u003eThe TS112 carries a complete set of balanced XLR connections: stereo in and out for transparent satellite throughput, plus LFE in and LFE\/Sub out for surround configurations. The switchable satellite filter (full range or 80–85 Hz) high-passes the satellite signal without requiring an external processor. The variable subwoofer crossover frequency (adjustable 60–140 Hz) allows precise crossover alignment with the roll-off characteristics of the main monitors and the acoustics of the room. The phase switch (0°\/180°) resolves the phase sum issue common when integrating a subwoofer with a monitor at a crossover point where physical distance between drivers introduces a phase offset.\u003c\/p\u003e\n\u003ch3\u003eWireless Remote as a Working Tool\u003c\/h3\u003e\n\u003cp\u003eIn a monitoring session, adjusting system level without leaving the sweet spot is not a convenience feature — it is a prerequisite for maintaining accurate reference level discipline. The TS112's wireless remote controls both the subwoofer level and the complete stereo system level (satellites and sub together) in a single operation, without reaching for monitor controls or an interface. The system volume range is -inf to +6 dB, separately adjustable for the sub and the full system.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePassive radiator design\u003c\/strong\u003e — eliminates bass reflex turbulence noise and port resonances; lower cut-off frequency in a compact cabinet, reduced intermodulation distortion.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400 W PWM amplifier\u003c\/strong\u003e — proprietary 12\" EVE Audio woofer, response from 24 Hz, 112 dB SPL at 1 m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull balanced XLR I\/O\u003c\/strong\u003e — stereo In\/Out, LFE In, LFE\/Sub Out; satellite throughput without additional hardware.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitchable satellite filter\u003c\/strong\u003e (full range \/ 80–85 Hz) and \u003cstrong\u003evariable sub filter\u003c\/strong\u003e (60–140 Hz).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase switch 0°\/180°\u003c\/strong\u003e — phase sum correction when integrating with satellite monitors.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless remote control\u003c\/strong\u003e — system and subwoofer level adjustment from the sweet spot.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby with DIP switch override\u003c\/strong\u003e — automatic standby can be disabled for continuous operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWoofer:\u003c\/strong\u003e 12\" (300 mm), proprietary EVE Audio design\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoading:\u003c\/strong\u003e Passive radiator (no bass reflex port)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier:\u003c\/strong\u003e PWM, 400 W (short-term output power)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency response:\u003c\/strong\u003e 24 Hz – 300 Hz (-3 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. SPL:\u003c\/strong\u003e 112 dB at 1 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubwoofer filter:\u003c\/strong\u003e Variable 60–140 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellite filter:\u003c\/strong\u003e Switchable (full range \/ 80 Hz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePhase:\u003c\/strong\u003e 0° \/ 180°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 2 × XLR stereo In (L\/R), 1 × XLR LFE In\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 2 × XLR stereo Out (L\/R), 1 × XLR LFE\/Sub Out\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVolume control range:\u003c\/strong\u003e -inf to +6 dB (system and sub independently)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H × D):\u003c\/strong\u003e 390 × 560 × 508–530 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless remote:\u003c\/strong\u003e Included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of manufacture:\u003c\/strong\u003e Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"EVE AUDIO","offers":[{"title":"Default Title","offer_id":54070214295889,"sku":"929","price":1290.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/EveAudioTS1121.jpg?v=1781525437"}],"url":"https:\/\/wrdtunes.com\/collections\/subwoofers.oembed","provider":"Wired Tunes","version":"1.0","type":"link"}