{"title":"Open-Back Headphones","description":"\u003cp\u003e\u003cstrong\u003eOpen-back headphones\u003c\/strong\u003e are the choice of sound engineers and mastering engineers who need the most natural and spacious soundstage possible. The open ear cup construction allows free airflow, eliminating the resonance chamber effect and delivering sound closer to studio monitor listening.\u003c\/p\u003e","products":[{"product_id":"audio-technica-ath-r70x","title":"Audio-Technica ATH-R70X","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eAudio-Technica ATH-R70x\u003c\/strong\u003e – professional open-back reference over-ear headphones with 45 mm drivers, 470 Ω impedance, 5–40,000 Hz frequency response, 98 dB sensitivity (1 kHz), 1,000 mW max input (1 kHz), feather-light 210 g (without cable\/connector), dual-sided 3.0 m detachable locking cable, protective carry pouch.\u003c\/p\u003e\n\u003cp\u003eATH-R70x is Audio-Technica’s reference open-back model, using acoustically transparent aluminum honeycomb housings and a pure-alloy magnetic circuit with high-efficiency magnets to minimize distortion and extend high-frequency response. Carbon-composite resin in key parts increases structural rigidity for clean transients, while the unique dual-sided locking cable is L\/R-independent to maintain correct stereo orientation whichever way it’s attached.\u003c\/p\u003e\n\u003cp\u003eBreathable fabric earpads and the improved 3D Wing Support headband deliver long-session comfort, and the lightweight build makes the R70x well-suited to critical mixing and editorial listening where natural imaging and low coloration are required.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOpen-back, acoustically transparent aluminum honeycomb housings\u003c\/li\u003e\n\u003cli\u003eSpecially designed 45 mm drivers with pure-alloy magnetic circuit and high-efficiency magnets\u003c\/li\u003e\n\u003cli\u003eCarbon-composite resin for higher rigidity and fast transient response\u003c\/li\u003e\n\u003cli\u003eDual-sided detachable locking cable (L\/R-independent stereo orientation)\u003c\/li\u003e\n\u003cli\u003eBreathable fabric earpads and improved 3D Wing Support headband\u003c\/li\u003e\n\u003cli\u003eFeather-light construction: approx. 210 g (without cable\/connector)\u003c\/li\u003e\n\u003cli\u003eProtective carrying pouch included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType \/ construction: Dynamic, open-back, over-ear\u003c\/li\u003e\n\u003cli\u003eDriver diameter: 45 mm\u003c\/li\u003e\n\u003cli\u003eFrequency response: 5 – 40,000 Hz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 98 dB (1 kHz)\u003c\/li\u003e\n\u003cli\u003eImpedance: 470 Ω\u003c\/li\u003e\n\u003cli\u003eMaximum input power: 1,000 mW (1 kHz)\u003c\/li\u003e\n\u003cli\u003eWeight: 210 g (without cable\/connector)\u003c\/li\u003e\n\u003cli\u003eCable: 3.0 m, dual-sided, detachable, locking\u003c\/li\u003e\n\u003cli\u003eAccessories: Protective carrying pouch\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"AUDIO-TECHNICA","offers":[{"title":"Default Title","offer_id":46825296331089,"sku":"41622","price":329.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/Audio-TechnicaATH-R70X1.jpg?v=1757961333"},{"product_id":"beyerdynamic-dt-1990-pro-250-ohm","title":"Beyerdynamic DT-1990 Pro 250 Ohm","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eBeyerdynamic DT 1990 PRO (250 Ω)\u003c\/strong\u003e – open-back circumaural studio headphones with 45 mm Tesla dynamic drivers, 250 Ω impedance, 5–40,000 Hz response, 102 dB SPL (1 mW\/500 Hz), 125 dB max SPL, \u0026lt;0.05% THD (1 mW\/500 Hz), headband pressure ≈6.6 N, 370 g weight (without cable); detachable single-sided mini-XLR cables (3.0 m straight and 5.0 m coiled), 3.5 mm plug with 6.35 mm adapter; two earpad sets (Analytical\/Balanced) and hard case included; made in Germany.\u003c\/p\u003e\n\u003cp\u003eDT 1990 PRO is a reference open monitoring design for mixing and mastering. The high-efficiency Tesla transducer system delivers wideband extension and low distortion, while the open architecture preserves spatial imaging. Two velour earpad sets enable either neutral or slightly bass-emphasized tuning without EQ.\u003c\/p\u003e\n\u003cp\u003eA lockable, single-sided mini-XLR interface supports quick cable changes, and the spring-steel headband with replaceable pads is built for long-term serviceability.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOpen, circumaural construction with Tesla 45 mm dynamic drivers\u003c\/li\u003e\n\u003cli\u003eTwo included pad tunings: Analytical (neutral) and Balanced (slight bass lift)\u003c\/li\u003e\n\u003cli\u003eDetachable, single-sided cables (3.0 m straight, 5.0 m coiled) with mini-XLR\u003c\/li\u003e\n\u003cli\u003eRobust spring-steel headband; user-replaceable pads and cable\u003c\/li\u003e\n\u003cli\u003eHard case included; handmade in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransducer \/ principle: Dynamic, open-back\u003c\/li\u003e\n\u003cli\u003eEar coupling: Circumaural (over-ear)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 5 – 40,000 Hz\u003c\/li\u003e\n\u003cli\u003eImpedance: 250 Ω\u003c\/li\u003e\n\u003cli\u003eNominal SPL: 102 dB SPL (1 mW \/ 500 Hz)\u003c\/li\u003e\n\u003cli\u003eMax. SPL: 125 dB SPL (200 mW \/ 500 Hz)\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion: \u0026lt; 0.05% (1 mW \/ 500 Hz)\u003c\/li\u003e\n\u003cli\u003eNominal headband pressure: ≈ 6.6 N\u003c\/li\u003e\n\u003cli\u003eWeight (without cable): 370 g\u003c\/li\u003e\n\u003cli\u003eCables \/ connector: 3.0 m straight; 5.0 m coiled (stretched), single-sided; 3.5 mm TRS + 6.35 mm adapter; mini-XLR at earcup\u003c\/li\u003e\n\u003cli\u003eIn the box: Two velour earpad sets (Analytical\/ Balanced), straight cable, coiled cable, 6.35 mm adapter, hard case\u003c\/li\u003e\n\u003cli\u003eArticle no.: 710.490\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Beyerdynamic","offers":[{"title":"Default Title","offer_id":46825302819153,"sku":"41145","price":404.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/BeyerdynamicDT-1990Pro250Ohm1.jpg?v=1757964827"},{"product_id":"beyerdynamic-dt-990-pro-250-ohm-black-le","title":"Beyerdynamic DT-990 Pro 250 Ohm Black LE","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eBeyerdynamic DT 990 PRO Black Limited Edition (250 Ω)\u003c\/strong\u003e – open-back over-ear studio headphones; 5–35,000 Hz frequency response; 96 dB nominal SPL; THD \u0026lt; 0.2%; headband pressure approx. 3.5–5.5 N; 250 g (without cable); single-sided 3.0 m straight cable with 3.5 mm plug and 6.35 mm adapter; made in Germany.\u003c\/p\u003e\n\u003cp\u003eThis Black Limited Edition is a technically identical variant of the DT 990 PRO with a stealth black finish. The open, circumaural architecture delivers spacious, highly detailed monitoring for critical listening and precise editing, while the robust spring-steel headband and velour earpads ensure comfort in long sessions.\u003c\/p\u003e\n\u003cp\u003eCompared with the standard 250-ohm PRO package (often supplied with a coiled lead), the Black LE includes a single-sided 3 m straight cable for simple routing in the studio. All wear parts (pads, headband cushion, cable) are user-replaceable to support long-term serviceability.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOpen-back, circumaural design for spacious, analytical monitoring\u003c\/li\u003e\n\u003cli\u003eBlack Limited Edition finish; technically identical to DT 990 PRO\u003c\/li\u003e\n\u003cli\u003eSingle-sided 3.0 m straight cable; 3.5 mm plug with 6.35 mm adapter\u003c\/li\u003e\n\u003cli\u003eSoft replaceable velour earpads; durable spring-steel headband\u003c\/li\u003e\n\u003cli\u003eMade in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType \/ operating principle: Dynamic, open-back\u003c\/li\u003e\n\u003cli\u003eEar coupling: Circumaural (over-ear)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 5 – 35,000 Hz\u003c\/li\u003e\n\u003cli\u003eImpedance: 250 Ω\u003c\/li\u003e\n\u003cli\u003eNominal SPL: 96 dB\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion (THD): \u0026lt; 0.2%\u003c\/li\u003e\n\u003cli\u003eHeadband pressure: approx. 3.5–5.5 N\u003c\/li\u003e\n\u003cli\u003eWeight (without cable): 250 g\u003c\/li\u003e\n\u003cli\u003eCable \u0026amp; connector: 3.0 m straight, single-sided; 3.5 mm TRS with 6.35 mm adapter\u003c\/li\u003e\n\u003cli\u003eArticle no. (Black LE): 713368; EAN: 4010118713361\u003c\/li\u003e\n\u003cli\u003eCountry of origin: Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Beyerdynamic","offers":[{"title":"Default Title","offer_id":46825305833809,"sku":"48874","price":153.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/BeyerdynamicDT-990Pro250OhmBlackLE1.jpg?v=1757964613"},{"product_id":"beyerdynamic-dt-990-pro-250-оhm","title":"Beyerdynamic DT-990 Pro 250 Оhm","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eBeyerdynamic DT 990 Pro 250 Ohm\u003c\/strong\u003e – open-back studio headphones with dynamic drivers, analytical sound, and coiled cable. It provides spacious audio reproduction, high comfort, and suitability for mixing and mastering. On board, there is a robust headband, velour earpads, single-sided cable, and extensive performance functions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBeyerdynamic DT 990 Pro 250 Ohm\u003c\/strong\u003e is an environment for sound creation designed for professional applications. It features circumaural design with transparent and bassy sound, from simple monitoring to complex setups. Flexible impedance and accessories allow a wide range of options – including classics from the Beyerdynamic ecosystem.\u003c\/p\u003e\n\u003cp\u003eSound is deeply integrated: detailed highs, powerful bass, low distortion, support for high SPL. Monitoring can be done in studios or mobile – for accurate audio analysis. The headphones offer replaceable parts, German quality, and advanced features.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOpen diffuse-field studio headphone\u003c\/li\u003e\n\u003cli\u003eAnalytical sound\u003c\/li\u003e\n\u003cli\u003eRobust spring steel headband\u003c\/li\u003e\n\u003cli\u003eSoft replaceable earpads\u003c\/li\u003e\n\u003cli\u003eGold-plated stereo jack plug\u003c\/li\u003e\n\u003cli\u003eSingle-sided coiled cable\u003c\/li\u003e\n\u003cli\u003eMade in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransducer type: Dynamic\u003c\/li\u003e\n\u003cli\u003eOperating principle: Open\u003c\/li\u003e\n\u003cli\u003eFrequency response: 5 - 35,000 Hz\u003c\/li\u003e\n\u003cli\u003eNominal impedance: 250 Ω\u003c\/li\u003e\n\u003cli\u003eNominal SPL: 96 dB\u003c\/li\u003e\n\u003cli\u003eMax. SPL: 105 dB\u003c\/li\u003e\n\u003cli\u003eT.H.D.: \u0026lt; 0.2%\u003c\/li\u003e\n\u003cli\u003ePower handling capacity: 100 mW\u003c\/li\u003e\n\u003cli\u003eSound coupling to the ear: Circumaural\u003c\/li\u003e\n\u003cli\u003eNominal headband pressure: 3.5 N\u003c\/li\u003e\n\u003cli\u003eWeight without cable: 250 g\u003c\/li\u003e\n\u003cli\u003eCable: 3 m coiled cable\u003c\/li\u003e\n\u003cli\u003eConnection: Gold-plated stereo jack plug (3.5 mm) \u0026amp; 1\/4\" adapter (6.35 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Beyerdynamic","offers":[{"title":"Default Title","offer_id":46825306620241,"sku":"40949","price":148.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/beyerdynamicDT990Pro250_hm1.jpg?v=1757848453"},{"product_id":"beyerdynamic-dt-990-pro-80-ohm-black-le","title":"Beyerdynamic DT-990 Pro 80 Ohm Black LE","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eBeyerdynamic DT 990 PRO 80 Ohm Black LE\u003c\/strong\u003e – limited edition open-back studio headphones with dynamic drivers, analytical sound, and spacious reproduction. It provides detailed highs, intense bass, flexible cabling, and high comfort for mastering and analytical listening. On board, there is a rich effects section with velour earpads, spring steel headband, gold-plated connectors, and extensive performance functions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBeyerdynamic DT 990 PRO 80 Ohm Black LE\u003c\/strong\u003e is an environment for sound creation designed for professional studios. It features circumaural open-back design for natural soundstage, from simple playback to complex audio analysis. Flexible routing with straight cable and adapter enables a wide range of configurations – including new features for the Beyerdynamic ecosystem.\u003c\/p\u003e\n\u003cp\u003eSound is deeply integrated: low distortion, wide frequency response, support for high SPL. Monitoring can be done in real-time – for automatic tuning of sources. The headphones offer up to 100 mW power handling, replaceable parts, and advanced conditions.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOpen-back design for spacious sound reproduction\u003c\/li\u003e\n\u003cli\u003eCircumaural, over-ear fit for comfort\u003c\/li\u003e\n\u003cli\u003eRobust spring steel headband\u003c\/li\u003e\n\u003cli\u003eSoft velour earpads\u003c\/li\u003e\n\u003cli\u003eSingle-sided straight cable\u003c\/li\u003e\n\u003cli\u003eGold-plated stereo jack plug\u003c\/li\u003e\n\u003cli\u003eAnalytical sound with distinctive highs and intense bass\u003c\/li\u003e\n\u003cli\u003eLimited black edition\u003c\/li\u003e\n\u003cli\u003eMade in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransducer Type: Dynamic\u003c\/li\u003e\n\u003cli\u003eOperating Principle: Open\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 5 - 35,000 Hz\u003c\/li\u003e\n\u003cli\u003eNominal Impedance: 80 Ω\u003c\/li\u003e\n\u003cli\u003eNominal SPL: 96 dB\u003c\/li\u003e\n\u003cli\u003eMax SPL: 105 dB\u003c\/li\u003e\n\u003cli\u003eTHD: \u0026lt; 0.2%\u003c\/li\u003e\n\u003cli\u003ePower Handling Capacity: 100 mW\u003c\/li\u003e\n\u003cli\u003eSound Coupling: Circumaural\u003c\/li\u003e\n\u003cli\u003eHeadband Pressure: 3.5 N\u003c\/li\u003e\n\u003cli\u003eWeight (without cable): 250 g\u003c\/li\u003e\n\u003cli\u003eCable: 3 m straight\u003c\/li\u003e\n\u003cli\u003eConnector: Gold-plated 3.5 mm stereo jack with 6.3 mm adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Beyerdynamic","offers":[{"title":"Default Title","offer_id":46825307668817,"sku":"48875","price":156.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/beyerdynamicDT990PRO80OHMBLACKLE1.jpg?v=1757850340"},{"product_id":"focal-clear-mg-professional-headphone","title":"Focal Clear MG Professional","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eFocal Clear MG Professional\u003c\/strong\u003e – professional open-back headphones with 40 mm 'M'-shaped magnesium dome full-range speaker drivers, offering extreme precision, remarkable tonal balance, and bass articulation. It provides high spatial resolution, flexible cabling, and comfort for editing, mixing, and mastering. On board, there is a honeycomb grille, perforated microfibre earpads, leather-covered headband, and extensive performance functions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocal Clear MG Professional\u003c\/strong\u003e is an environment for sound creation designed for professional studios. It features magnesium diaphragms for detailed highs and lows, with an open-back design for natural soundstage. Flexible I\/O with coiled and straight cables enables a wide range of configurations – including new features for the Focal ecosystem.\u003c\/p\u003e\n\u003cp\u003eSound is deeply integrated: linear high frequencies up to 28 kHz, low harmonic distortion, internal 'M'-shaped grille for efficiency. Monitoring can be done in real-time – for precise audio decisions without fatigue. The headphones offer French craftsmanship, replaceable parts, and advanced audio options.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOpen-back circum-aural headphones\u003c\/li\u003e\n\u003cli\u003e40 mm 'M'-shaped magnesium dome full-range speaker drivers\u003c\/li\u003e\n\u003cli\u003eRemarkable tonal balance and bass articulation\u003c\/li\u003e\n\u003cli\u003eInternal honeycomb grille following 'M' profile for efficiency\u003c\/li\u003e\n\u003cli\u003eConstant curvature headband for comfort\u003c\/li\u003e\n\u003cli\u003eSolid aluminum yoke without vertical rotation mechanism\u003c\/li\u003e\n\u003cli\u003eExternal microfibre grille for openness\u003c\/li\u003e\n\u003cli\u003ePerforated microfibre earpads and leather-covered headband\u003c\/li\u003e\n\u003cli\u003eRequires running-in period for optimal performance\u003c\/li\u003e\n\u003cli\u003eSupplied with rigid carrying case and two cables\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: Open-back circum-aural headphones\u003c\/li\u003e\n\u003cli\u003eImpedance: 55 Ohms\u003c\/li\u003e\n\u003cli\u003eSensitivity: 104 dB SPL \/ 1 mW @ 1 kHz\u003c\/li\u003e\n\u003cli\u003eTHD: 0.25% @ 1 kHz \/ 100 dB SPL\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 5 Hz – 28 kHz\u003c\/li\u003e\n\u003cli\u003eSpeaker Driver: 1 5\/8\" (40 mm) 'M'-shaped magnesium dome\u003c\/li\u003e\n\u003cli\u003eWeight: 450 g\u003c\/li\u003e\n\u003cli\u003eCables: 5 m coiled OFC 24 AWG cable with 1\/4\" (6.35 mm) TRS jack connector, 1.2 m OFC 24 AWG cable with 1\/8\" (3.5 mm) TRS jack connector\u003c\/li\u003e\n\u003cli\u003eConnector: 1\/8\" (3.5 mm) TRS jack stereo, Adapter: 1\/8\" (3.5 mm) TRS jack female to 1\/4\" (6.35 mm) TRS jack male\u003c\/li\u003e\n\u003cli\u003eCarrying Case Dimensions: 250 x 240 x 120 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOCAL","offers":[{"title":"Default Title","offer_id":46825346564433,"sku":"43448","price":1146.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FOCALCLEARMGPROFESSIONALHEADPHONE.jpg?v=1757849345"},{"product_id":"sennheiser-hd-600","title":"Sennheiser HD 600","description":"\u003cp\u003eBundle offer comprising\u003c\/p\u003eNeumann M147 \u003cul\u003e\n\u003cli\u003eTube condenser microphone\u003c\/li\u003e \u003cli\u003ePressure gradient transducer with the same large diaphragm capsule of the legendary U 47 and M 49\u003c\/li\u003e \u003cli\u003eDirectional characteristics: cardioid\u003c\/li\u003e \u003cli\u003eFrequency range: 20 - 20,000 kHz\u003c\/li\u003e \u003cli\u003eMax. sound pressure level: 114 dB for K \u0026lt; 0.5%, 134 dB for K \u0026lt; 5%\u003c\/li\u003e \u003cli\u003eMax. 8 dBu output voltage\u003c\/li\u003e \u003cli\u003eNominal impedance: 50 Ohm\u003c\/li\u003e \u003cli\u003eNominal load impedance: 1 kOhm\u003c\/li\u003e \u003cli\u003eDimensions (diameter x length): 57 x 142 mm\u003c\/li\u003e \u003cli\u003eWeight: 460g\u003c\/li\u003e \u003cli\u003eIncl. swivel mount, N 149 A universal power supply with mains cable and aluminium case\u003c\/li\u003e \u003c\/ul\u003e Neumann EA 1 \u003cul\u003e\n\u003cli\u003eElastic Microphone Shock Mount\u003c\/li\u003e \u003cli\u003eFor M147, TLM 103, TLM 193\u003c\/li\u003e \u003cli\u003eColour: White\u003c\/li\u003e \u003c\/ul\u003e\u003ciframe width=\"\" height=\"\" src=\"\" frameborder=\"\" https:=\"\"\u003e\u003c\/iframe\u003e","brand":"Sennheiser","offers":[{"title":"Default Title","offer_id":46825472164177,"sku":"22131","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/products\/16917425_800_2660f61c-0bdd-440c-ab07-7acdfa62da96.jpg?v=1689109417"},{"product_id":"sennheiser-hd-650","title":"Sennheiser HD 650","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eSennheiser HD 650\u003c\/strong\u003e – open-back dynamic over-ear headphones; 300 Ω impedance; 10–41,000 Hz frequency response; 103 dB SPL (1 V, 1 kHz); \u0026lt;0.05% THD (1 kHz, 1 V); 260 g (without cable); 3 m detachable cable with 6.35 mm plug and 6.35→3.5 mm adapter.\u003c\/p\u003e\n\u003cp\u003eHD 650 uses Sennheiser’s open, circumaural architecture with a special acoustic metal-mesh damping element to control airflow and reduce resonances. The driver system features a 42 mm transducer with a 38 mm diaphragm tuned for low distortion and linear extension, while the 300-ohm voice coil pairs well with dedicated headphone amplifiers.\u003c\/p\u003e\n\u003cp\u003eThe detachable 3 m OFC cable terminates in a 6.35 mm stereo plug; a 6.35→3.5 mm adapter is included for wider device compatibility. Contact pressure is factory-specified at 6.0 N ± 1 N for stable fit during long listening sessions.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDynamic, open-back, circumaural design for natural acoustic radiation\u003c\/li\u003e\n\u003cli\u003e42 mm transducer with 38 mm diaphragm; optimized damping with fine acoustic metal mesh\u003c\/li\u003e\n\u003cli\u003e300 Ω voice coil for low distortion and amplifier synergy\u003c\/li\u003e\n\u003cli\u003eWideband response 10–41 kHz and low THD \u0026lt;0.05% (1 kHz, 1 V)\u003c\/li\u003e\n\u003cli\u003eDetachable 3 m OFC cable with 6.35 mm plug; 6.35→3.5 mm adapter included\u003c\/li\u003e\n\u003cli\u003eVelour earpads and controlled contact pressure (6.0 N ± 1 N) for comfort\u003c\/li\u003e\n\u003cli\u003eServiceable construction with user-replaceable pads and cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransducer principle: Dynamic, open\u003c\/li\u003e\n\u003cli\u003eEar coupling: Circumaural (over-ear)\u003c\/li\u003e\n\u003cli\u003eFrequency response: 10 – 41,000 Hz\u003c\/li\u003e\n\u003cli\u003eImpedance: 300 Ω\u003c\/li\u003e\n\u003cli\u003eSound pressure level (SPL): 103 dB (1 V, 1 kHz)\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion (THD): \u0026lt; 0.05% (1 kHz, 1 V)\u003c\/li\u003e\n\u003cli\u003eContact pressure: 6.0 N ± 1 N\u003c\/li\u003e\n\u003cli\u003eCable: 3 m, detachable\u003c\/li\u003e\n\u003cli\u003eConnector: 6.35 mm stereo jack; adapter 6.35 → 3.5 mm included\u003c\/li\u003e\n\u003cli\u003eWeight (without cable): 260 g\u003c\/li\u003e\n\u003cli\u003eColor: Titan\u003c\/li\u003e\n\u003cli\u003eIn the box: HD 650 headphones, 3 m cable (6.35 mm), 6.35→3.5 mm adapter, documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sennheiser","offers":[{"title":"Default Title","offer_id":46825472393553,"sku":"22150","price":445.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/SennheiserHD6501.jpg?v=1757962410"},{"product_id":"sennheiser-hd-660s","title":"Sennheiser HD 660S","description":"Headphones \u003cul\u003e\n\u003cli\u003eSennheiser Audiophile Range\u003c\/li\u003e \u003cli\u003eNew transducer system developed by Sennheiser\u003c\/li\u003e \u003cli\u003eCircumaural\u003c\/li\u003e \u003cli\u003eOpen\u003c\/li\u003e \u003cli\u003eDynamic\u003c\/li\u003e \u003cli\u003eTwo-sided cable routing\u003c\/li\u003e \u003cli\u003eMaximum sound pressure level: 104 dB SPL @ 1 kHz, 1V RMS\u003c\/li\u003e \u003cli\u003eImpedance: 150 Ohm\u003c\/li\u003e \u003cli\u003eFrequency range: 10 - 41,000 Hz\u003c\/li\u003e \u003cli\u003eDistortion factor at 1 kHz \u0026lt; 0.4\u003c\/li\u003e \u003cli\u003eWeight: 260 g\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eCables included:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e3 m cable with 6.3 mm jack\u003c\/li\u003e \u003cli\u003e3 m cable with 4.4 mm jack balanced\u003c\/li\u003e \u003cli\u003eAdapter cable 6.3 mm jack to 3.5 mm jack\u003c\/li\u003e \u003c\/ul\u003e","brand":"Sennheiser","offers":[{"title":"Default Title","offer_id":46825472688465,"sku":"22152","price":0.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/products\/14722546_800_8e233dd8-262b-453d-b25b-6dbd3427193d.jpg?v=1689107489"},{"product_id":"sennheiser-hd-660s2","title":"Sennheiser HD 660S2","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eSennheiser HD 660S2\u003c\/strong\u003e – open-back dynamic over-ear headphones with 38 mm transducers, 300 Ω impedance, 104 dB SPL (1 kHz\/1 Vrms), 8–41,500 Hz frequency response, \u0026lt;0.04% THD (1 kHz\/100 dB), 260 g weight, detachable 1.8 m cables (6.3 mm single-ended and 4.4 mm balanced), 6.3–3.5 mm adapter, made in Ireland.\u003c\/p\u003e\n\u003cp\u003eHD 660S2 refines the HD 600-series reference tuning with deeper sub-bass extension and improved airflow around the driver for higher acoustic efficiency. An ultra-light aluminum voice coil with a 300-ohm load delivers fast transient response and low distortion, while the open-back chassis preserves a wide, natural soundstage.\u003c\/p\u003e\n\u003cp\u003eThe driver assembly uses steel-mesh damping shaped to the transducer geometry and a vented magnet system to control air movement and minimize distortion. Plush velour pads and a low-mass headband provide long-session comfort, and the dual detachable cables (single-ended and 4.4 mm balanced) simplify integration with studio and hi-fi headphone amps.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e300 Ω ultra-light aluminum voice coil for precise transients and amplifier synergy\u003c\/li\u003e\n\u003cli\u003e38 mm dynamic transducers with optimized surround and airflow for extended sub-bass\u003c\/li\u003e\n\u003cli\u003eOpen-back architecture for natural imaging and spacious soundstage\u003c\/li\u003e\n\u003cli\u003eVented magnet system and steel-mesh damping to reduce distortion\u003c\/li\u003e\n\u003cli\u003eTwo detachable 1.8 m cables (6.3 mm and 4.4 mm) plus 6.3→3.5 mm adapter\u003c\/li\u003e\n\u003cli\u003ePlush velour earpads; replaceable pads and cables for long-term serviceability\u003c\/li\u003e\n\u003cli\u003eManufactured in Ireland\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransducer principle: Dynamic, open\u003c\/li\u003e\n\u003cli\u003eTransducer size: 38 mm\u003c\/li\u003e\n\u003cli\u003eImpedance: 300 Ω\u003c\/li\u003e\n\u003cli\u003eFrequency response: 8 – 41,500 Hz\u003c\/li\u003e\n\u003cli\u003eSound pressure level (SPL): 104 dB (1 kHz, 1 Vrms)\u003c\/li\u003e\n\u003cli\u003eTotal harmonic distortion (THD): \u0026lt;0.04% (1 kHz, 100 dB)\u003c\/li\u003e\n\u003cli\u003eEar coupling: Over-ear\u003c\/li\u003e\n\u003cli\u003eWeight (without cable): 260 g\u003c\/li\u003e\n\u003cli\u003eCable length: 1.8 m (both)\u003c\/li\u003e\n\u003cli\u003eConnectors: 6.3 mm (single-ended), 4.4 mm (balanced)\u003c\/li\u003e\n\u003cli\u003eIncluded: HD 660S2 headphones, 6.3 mm cable (1.8 m), 4.4 mm balanced cable (1.8 m), 6.3→3.5 mm adapter, pouch\u003c\/li\u003e\n\u003cli\u003eCountry of origin: Ireland\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Sennheiser","offers":[{"title":"Default Title","offer_id":46825473016145,"sku":"51770","price":548.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/SennheiserHD660S21.jpg?v=1757962325"},{"product_id":"sony-mdr-mv1","title":"Sony MDR-MV1","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eSony MDR-MV1\u003c\/strong\u003e – open-back reference monitor headphones with 40 mm dynamic drivers, high-resolution audio capability, and detachable cable. It provides neutral sound reproduction, spacious soundstage, and comfort for mixing, mastering, and monitoring. On board, there is a rich effects section with lightweight design, velour earpads, adjustable headband, and extensive performance functions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSony MDR-MV1\u003c\/strong\u003e is an environment for sound creation designed for creators. It features open-back architecture for natural listening, suitable for studios and professionals. Flexible routing with detachable cable and adapter enables a wide range of configurations – including new features for the Sony ecosystem.\u003c\/p\u003e\n\u003cp\u003eSound is deeply integrated: low distortion, wide frequency response, support for high SPL. Monitoring can be done in real-time – for automatic tuning of sources. The headphones offer up to 500 mW power handling, replaceable parts, and advanced conditions.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOpen-back design for spacious soundstage and natural reproduction\u003c\/li\u003e\n\u003cli\u003e40 mm dynamic drivers for neutral frequency response\u003c\/li\u003e\n\u003cli\u003eHigh-Resolution Audio certified with 5 Hz to 80 kHz range\u003c\/li\u003e\n\u003cli\u003eLightweight 223 g for long sessions\u003c\/li\u003e\n\u003cli\u003eVelour earpads and adjustable headband for comfort\u003c\/li\u003e\n\u003cli\u003eDetachable 2.5 m cable with 3.5 mm plug and 6.3 mm adapter\u003c\/li\u003e\n\u003cli\u003eDesigned in collaboration with creators for professional use\u003c\/li\u003e\n\u003cli\u003eLow impedance for easy drive from various devices\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransducer Type: Dynamic\u003c\/li\u003e\n\u003cli\u003eOperating Principle: Open\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 5 - 80,000 Hz\u003c\/li\u003e\n\u003cli\u003eNominal Impedance: 24 ohms\u003c\/li\u003e\n\u003cli\u003eNominal SPL: 100 dB\/mW\u003c\/li\u003e\n\u003cli\u003eMax SPL: 105 dB\u003c\/li\u003e\n\u003cli\u003eTHD: \u0026lt; 0.2%\u003c\/li\u003e\n\u003cli\u003ePower Handling Capacity: 500 mW\u003c\/li\u003e\n\u003cli\u003eSound Coupling: Circumaural\u003c\/li\u003e\n\u003cli\u003eHeadband Pressure: 3.5 N\u003c\/li\u003e\n\u003cli\u003eWeight (without cable): 223 g\u003c\/li\u003e\n\u003cli\u003eCable: 2.5 m detachable\u003c\/li\u003e\n\u003cli\u003eConnector: 3.5 mm stereo jack with 6.3 mm adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"SONY","offers":[{"title":"Default Title","offer_id":46825479471441,"sku":"51558","price":496.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/SonyMDR-MV1.jpg?v=1757962282"},{"product_id":"beyerdynamic-dt-900-pro-x","title":"Beyerdynamic DT-900 Pro X","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eBeyerdynamic DT 900 PRO X\u003c\/strong\u003e – open-back premium studio headphones with STELLAR.45 dynamic driver, detachable Mini-XLR cable, and rugged spring steel headband. It offers high-performance sound reproduction, versatile applications on all devices, and spacious soundstage. On board, there is a 45 mm transducer, velour earpads, memory foam headband, and extensive performance functions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBeyerdynamic DT 900 PRO X\u003c\/strong\u003e is an environment for sound creation designed for professional mixing and mastering in studios or on the go. It features circumaural over-ear design with detailed and transparent audio, compatible with interfaces, laptops, tablets, or mobiles. Flexible connectivity with 3m or 1.8m cables and adapters enables a wide range of setups – including new features for the Beyerdynamic ecosystem.\u003c\/p\u003e\n\u003cp\u003eDesign is deeply integrated: single-sided detachable cable, replaceable earpads and headband for sustainability, low impedance for mobile use. Comfort includes soft velour and ergonomic fit – for long sessions without fatigue. The headphones offer German craftsmanship, robust workmanship, and advanced audio options.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOpen-back premium studio headphones\u003c\/li\u003e\n\u003cli\u003eIdeal for mixing and mastering\u003c\/li\u003e\n\u003cli\u003eSTELLAR.45 driver for high-performance studio sound\u003c\/li\u003e\n\u003cli\u003e48 ohms and wide range of applications on all devices\u003c\/li\u003e\n\u003cli\u003eRugged spring steel headband construction\u003c\/li\u003e\n\u003cli\u003eSingle-sided detachable cable\u003c\/li\u003e\n\u003cli\u003eSoft, replaceable earpads and headband pad\u003c\/li\u003e\n\u003cli\u003eGold-plated mini stereo jack connector (3.5 mm) and 1\/4\" adapter (6.35 mm)\u003c\/li\u003e\n\u003cli\u003eSpacious soundstage with low distortion\u003c\/li\u003e\n\u003cli\u003eSupplied with two cables (3m and 1.8m) and bag\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransducer Type: Dynamic\u003c\/li\u003e\n\u003cli\u003eOperating Principle: Open\u003c\/li\u003e\n\u003cli\u003eSound Coupling to the Ear: Circumaural\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 5 - 40,000 Hz\u003c\/li\u003e\n\u003cli\u003eNominal Impedance: 48 Ω\u003c\/li\u003e\n\u003cli\u003eNominal Sound Pressure Level @1 mW \/ 500 Hz: 100 dB SPL\u003c\/li\u003e\n\u003cli\u003eNominal Sound Pressure Level @1 V \/ 500 Hz: 114 dB SPL\u003c\/li\u003e\n\u003cli\u003eShort Term Maximum Input Power: 100 mW\u003c\/li\u003e\n\u003cli\u003eRated Maximum Input Power (Continuous): 30 mW\u003c\/li\u003e\n\u003cli\u003eTHD @ 1 mW: 0.40% @ 100 Hz, 0.05% @ 500 Hz, 0.04% @ 1 kHz\u003c\/li\u003e\n\u003cli\u003eHeadband Pressure: 5.3 N\u003c\/li\u003e\n\u003cli\u003eLength and Type of Cable: 3 m \/ straight or 1.8 m \/ straight, detachable, 3-pin mini XLR, single-sided\u003c\/li\u003e\n\u003cli\u003eConnection: Gold-plated mini stereo jack (3.5 mm) \u0026amp; 1\/4\" adapter (6.35 mm)\u003c\/li\u003e\n\u003cli\u003eWeight (without cable): 345 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Beyerdynamic","offers":[{"title":"Default Title","offer_id":46829814317393,"sku":"47190","price":218.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/BeyerdynamicDT900PROX1.jpg?v=1757848626"},{"product_id":"avantone-pro-planar-the-ii-black","title":"Avantone Pro PLANAR THE II Black","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eAvantone Pro Planar the II Black\u003c\/strong\u003e – open-back reference-grade planar magnetic headphones with 70 x 95 mm neodymium N50SH drivers, ultra-thin 21 micron PET diaphragm, and eco-friendly carrying bag. It offers amazing accuracy, high-end detail, clarity, natural bass, and fast response time. On board, there is a rich effects section with open-back architecture, noise-free cable, dual input jacks, and extensive performance functions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAvantone Pro Planar the II Black\u003c\/strong\u003e is an environment for sound creation designed for mix engineers, musicians, podcasters, live-streamers, and hi-fi enthusiasts. It features lightweight design for long sessions, from simple playback to complex multisampled instruments. Flexible routing with removable cable and adapters enables a wide range of configurations – including new features for the Avantone ecosystem.\u003c\/p\u003e\n\u003cp\u003eModulation is deeply integrated: planar drivers for symmetric force distribution, low distortion, and natural sound. Monitoring can be done in real-time – for automatic tuning of external sources. The headphones offer parallel-wired inputs, optional replacements, and advanced triggering options.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-definition planar driver technology outperforms typical dynamic headphone designs, providing an uncompromised, natural sound\u003c\/li\u003e\n\u003cli\u003eLow distortion, fast response, and flat frequency response for more precision and accuracy when monitoring and mixing\u003c\/li\u003e\n\u003cli\u003eOver the ear, open-back, and extremely lightweight design for greater comfort during long mix sessions\u003c\/li\u003e\n\u003cli\u003eLow impedance and amplifier requirements for better use with recording interfaces, hi-fi systems, or mobile devices\u003c\/li\u003e\n\u003cli\u003eExtremely wide frequency response from 30 Hz to 30 kHz\u003c\/li\u003e\n\u003cli\u003eHigh-grade, removable, noise-free 3.5mm cable (2-meter)\u003c\/li\u003e\n\u003cli\u003eParallel-wired, sturdy dual input jacks (one on each side)\u003c\/li\u003e\n\u003cli\u003eAvailable in black, red, and creme\u003c\/li\u003e\n\u003cli\u003eOptional replacement cable and earpads available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStyle: Over-ear, open-back\u003c\/li\u003e\n\u003cli\u003eTransducer Type: Planar Magnetic\u003c\/li\u003e\n\u003cli\u003eMagnet Type: Neodymium N50SH\u003c\/li\u003e\n\u003cli\u003eDiaphragm Type: 21 Micron PET\u003c\/li\u003e\n\u003cli\u003eTransducer size: 70 x 95 mm\u003c\/li\u003e\n\u003cli\u003eMaximum power handling: 5W RMS\u003c\/li\u003e\n\u003cli\u003eFrequency response: 30Hz - 30kHz\u003c\/li\u003e\n\u003cli\u003eTHD: \u0026lt;0.1% @ 100dB\u003c\/li\u003e\n\u003cli\u003eImpedance: 32 Ω\u003c\/li\u003e\n\u003cli\u003eSensitivity: 104 dB\/1mW (at Drum Reference Point)\u003c\/li\u003e\n\u003cli\u003eMinimum power: \u0026gt;100mW\u003c\/li\u003e\n\u003cli\u003eRecommended power: \u0026gt;250mW\u003c\/li\u003e\n\u003cli\u003eWeight: .51 kg; 1.13 Lbs\u003c\/li\u003e\n\u003cli\u003eColor: Black\u003c\/li\u003e\n\u003cli\u003eIncluded Accessories: 1.5m; 5ft 3.5mm audio cable, 3.5mm to 1\/4” adapter, Eco-friendly carrying bag\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Avantone Pro","offers":[{"title":"Default Title","offer_id":47037293887825,"sku":"52369","price":423.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/AvantoneProPLANARTHEIIBlack.jpg?v=1757962244"},{"product_id":"avantone-pro-planar-the-ii-creme","title":"Avantone Pro PLANAR THE II Creme","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eAvantone Pro Planar the II Creme\u003c\/strong\u003e – professional open-back planar magnetic headphones with 70 x 95 mm neodymium N50SH drivers, ultra-thin 21 micron PET diaphragm, and eco-friendly carrying bag. It offers amazing accuracy, high-end detail, clarity, natural bass, and fast response time. On board, there is an open-back architecture, noise-free cable, dual input jacks, and extensive performance functions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAvantone Pro Planar the II Creme\u003c\/strong\u003e is an environment for sound creation designed for mix engineers, musicians, podcasters, live-streamers, and hi-fi enthusiasts. It features lightweight design for long sessions, from simple playback to complex multisampled instruments. Flexible routing with removable cable and adapters enables a wide range of configurations – including new features for the Avantone ecosystem.\u003c\/p\u003e\n\u003cp\u003eModulation is deeply integrated: planar drivers for symmetric force distribution, low distortion, and natural sound. Monitoring can be done in real-time – for automatic tuning of external sources. The headphones offer parallel-wired inputs, optional replacements, and advanced options.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-definition planar driver technology outperforms typical dynamic headphone designs, providing an uncompromised, natural sound\u003c\/li\u003e\n\u003cli\u003eLow distortion, fast response, and flat frequency response for more precision and accuracy when monitoring and mixing\u003c\/li\u003e\n\u003cli\u003eOver the ear, open-back, and extremely lightweight design for greater comfort during long mix sessions\u003c\/li\u003e\n\u003cli\u003eLow impedance and amplifier requirements for better use with recording interfaces, hi-fi systems, or mobile devices\u003c\/li\u003e\n\u003cli\u003eExtremely wide frequency response from 30 Hz to 30 kHz\u003c\/li\u003e\n\u003cli\u003eHigh-grade, removable, noise-free 3.5mm cable (2-meter)\u003c\/li\u003e\n\u003cli\u003eParallel-wired, sturdy dual input jacks (one on each side)\u003c\/li\u003e\n\u003cli\u003eAvailable in black, red, and creme\u003c\/li\u003e\n\u003cli\u003eOptional replacement cable and earpads available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStyle: Over-ear, open-back\u003c\/li\u003e\n\u003cli\u003eTransducer Type: Planar Magnetic\u003c\/li\u003e\n\u003cli\u003eMagnet Type: Neodymium N50SH\u003c\/li\u003e\n\u003cli\u003eDiaphragm Type: 21 Micron PET\u003c\/li\u003e\n\u003cli\u003eTransducer size: 70 x 95 mm\u003c\/li\u003e\n\u003cli\u003eMaximum power handling: 5W RMS\u003c\/li\u003e\n\u003cli\u003eFrequency response: 30Hz - 30kHz\u003c\/li\u003e\n\u003cli\u003eTHD: \u0026lt;0.1% @ 100dB\u003c\/li\u003e\n\u003cli\u003eImpedance: 32 Ω\u003c\/li\u003e\n\u003cli\u003eSensitivity: 104 dB\/1mW (at Drum Reference Point)\u003c\/li\u003e\n\u003cli\u003eMinimum power: \u0026gt;100mW\u003c\/li\u003e\n\u003cli\u003eRecommended power: \u0026gt;250mW\u003c\/li\u003e\n\u003cli\u003eWeight: .51 kg; 1.13 Lbs\u003c\/li\u003e\n\u003cli\u003eColor: Creme\u003c\/li\u003e\n\u003cli\u003eIncluded Accessories: 1.5m; 5ft 3.5mm audio cable, 3.5mm to 1\/4” adapter, Eco-friendly carrying bag\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Avantone Pro","offers":[{"title":"Default Title","offer_id":47037294215505,"sku":"52372","price":423.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/AvantoneProPLANARTHEIICreme1.jpg?v=1757849929"},{"product_id":"avantone-pro-planar-the-ii-red","title":"Avantone Pro PLANAR THE II Red","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eAvantone Pro Planar the II Red\u003c\/strong\u003e – open-back reference-grade planar magnetic headphones with 70 x 95 mm neodymium N50SH drivers, ultra-thin 21 micron PET diaphragm, and eco-friendly carrying bag. It offers amazing accuracy, high-end detail, clarity, natural bass, and fast response time. On board, there is a rich effects section with open-back architecture, noise-free cable, dual input jacks, and extensive performance functions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAvantone Pro Planar the II Red\u003c\/strong\u003e is an environment for sound creation designed for mix engineers, musicians, podcasters, live-streamers, and hi-fi enthusiasts. It features lightweight design for long sessions, from simple playback to complex multisampled instruments. Flexible routing with removable cable and adapters enables a wide range of configurations – including new features for the Avantone ecosystem.\u003c\/p\u003e\n\u003cp\u003eModulation is deeply integrated: planar drivers for symmetric force distribution, low distortion, and natural sound. Monitoring can be done in real-time – for automatic tuning of external sources. The headphones offer parallel-wired inputs, optional replacements, and advanced triggering options.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-definition planar driver technology outperforms typical dynamic headphone designs, providing an uncompromised, natural sound\u003c\/li\u003e\n\u003cli\u003eLow distortion, fast response, and flat frequency response for more precision and accuracy when monitoring and mixing\u003c\/li\u003e\n\u003cli\u003eOver the ear, open-back, and extremely lightweight design for greater comfort during long mix sessions\u003c\/li\u003e\n\u003cli\u003eLow impedance and amplifier requirements for better use with recording interfaces, hi-fi systems, or mobile devices\u003c\/li\u003e\n\u003cli\u003eExtremely wide frequency response from 30 Hz to 30 kHz\u003c\/li\u003e\n\u003cli\u003eHigh-grade, removable, noise-free 3.5mm cable (2-meter)\u003c\/li\u003e\n\u003cli\u003eParallel-wired, sturdy dual input jacks (one on each side)\u003c\/li\u003e\n\u003cli\u003eAvailable in black, red, and creme\u003c\/li\u003e\n\u003cli\u003eOptional replacement cable and earpads available\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStyle: Over-ear, open-back\u003c\/li\u003e\n\u003cli\u003eTransducer Type: Planar Magnetic\u003c\/li\u003e\n\u003cli\u003eMagnet Type: Neodymium N50SH\u003c\/li\u003e\n\u003cli\u003eDiaphragm Type: 21 Micron PET\u003c\/li\u003e\n\u003cli\u003eTransducer size: 70 x 95 mm\u003c\/li\u003e\n\u003cli\u003eMaximum power handling: 5W RMS\u003c\/li\u003e\n\u003cli\u003eFrequency response: 30Hz - 30kHz\u003c\/li\u003e\n\u003cli\u003eTHD: \u0026lt;0.1% @ 100dB\u003c\/li\u003e\n\u003cli\u003eImpedance: 32 Ω\u003c\/li\u003e\n\u003cli\u003eSensitivity: 104 dB\/1mW (at Drum Reference Point)\u003c\/li\u003e\n\u003cli\u003eMinimum power: \u0026gt;100mW\u003c\/li\u003e\n\u003cli\u003eRecommended power: \u0026gt;250mW\u003c\/li\u003e\n\u003cli\u003eWeight: .51 kg; 1.13 Lbs\u003c\/li\u003e\n\u003cli\u003eColor: Red\u003c\/li\u003e\n\u003cli\u003eIncluded Accessories: 1.5m; 5ft 3.5mm audio cable, 3.5mm to 1\/4” adapter, Eco-friendly carrying bag\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Avantone Pro","offers":[{"title":"Default Title","offer_id":47037294379345,"sku":"52370","price":423.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/AvantoneProPLANARTHEIIRed.jpg?v=1757962218"},{"product_id":"neumann-ndh-30-black-edition","title":"Neumann NDH 30 Black Edition","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eNeumann NDH 30 Black Edition\u003c\/strong\u003e – reference-class open-back studio headphones with 38 mm dynamic drivers, high-precision stereo imaging, and detachable internally balanced cable. It offers outstanding linearity, transient response, and compatibility with KH-Line speakers. On board, there is a neodymium magnet, cloth-covered grille, and extensive performance functions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNeumann NDH 30 Black Edition\u003c\/strong\u003e is an environment for sound creation designed for editing, mixing, and mastering. It features circumaural design with razor-sharp localization, suitable for professional studios and portable use. Flexible connectivity with 3m cable, 3.5mm jack, and 6.3mm adapter enables a wide range of setups – including new features for the Neumann ecosystem.\u003c\/p\u003e\n\u003cp\u003eDesign is deeply integrated: foldable for transport, replaceable earpads for sustainability, low headband pressure for comfort. Audio tuning includes frequency-selective absorbers for uncolored sound – for accurate decisions without fatigue. The headphones offer German manufacturing, black finish, and advanced audio options.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOutstanding linearity and transient response\u003c\/li\u003e\n\u003cli\u003eHigh spatial resolution\u003c\/li\u003e\n\u003cli\u003eSound and mix compatibility with Neumann KH-Line speakers\u003c\/li\u003e\n\u003cli\u003eHigh long-term comfort with fontanelle recess\u003c\/li\u003e\n\u003cli\u003eInternally balanced detachable cable\u003c\/li\u003e\n\u003cli\u003eFoldable for easy transport\u003c\/li\u003e\n\u003cli\u003eReplaceable parts for longevity\u003c\/li\u003e\n\u003cli\u003eClosed acoustic dipoles for precise imaging\u003c\/li\u003e\n\u003cli\u003eFrequency-selective absorbers to eliminate high-frequency overemphasis\u003c\/li\u003e\n\u003cli\u003eMade in Germany with premium materials\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFrequency Range: 12 - 34,000 Hz\u003c\/li\u003e\n\u003cli\u003eAcoustic Principle: Dynamic open\u003c\/li\u003e\n\u003cli\u003eWearing Style: Headband\u003c\/li\u003e\n\u003cli\u003eFoldable: Yes\u003c\/li\u003e\n\u003cli\u003eEar Coupling: Circumaural\u003c\/li\u003e\n\u003cli\u003eTransducer Diameter: 38 mm\u003c\/li\u003e\n\u003cli\u003eTransducer Magnet: Neodymium\u003c\/li\u003e\n\u003cli\u003eTransducer Protection: Cloth covered grille\u003c\/li\u003e\n\u003cli\u003eNominal Impedance: 120 Ohm\u003c\/li\u003e\n\u003cli\u003eSensitivity at 1 kHz\/1 Vrms: 104 dB SPL\u003c\/li\u003e\n\u003cli\u003eMax Input Power Handling: 1000 mW\u003c\/li\u003e\n\u003cli\u003eContinuous Input Power Handling: 200 mW\u003c\/li\u003e\n\u003cli\u003eTHD at 1 kHz and 100 dB SPL: \u0026lt;0.03%\u003c\/li\u003e\n\u003cli\u003eCable Entry: Single sided, right ear cup\u003c\/li\u003e\n\u003cli\u003eConnectivity: 3.5 mm (1\/8\") TRS jack plug (straight), adapter for 6.3 mm (1\/4\")\u003c\/li\u003e\n\u003cli\u003eCable Length: 3.0 m (10')\u003c\/li\u003e\n\u003cli\u003eEar Cup Contact Pressure: 5.5-6.8 N\u003c\/li\u003e\n\u003cli\u003eWeight Excluding Cable: 352 g\u003c\/li\u003e\n\u003cli\u003eDetachable Cable: Yes\u003c\/li\u003e\n\u003cli\u003eReplaceable Earpads: Yes\u003c\/li\u003e\n\u003cli\u003eColours - Headband\/Ear Cups: Black\u003c\/li\u003e\n\u003cli\u003eMaterials - Headband: Spring steel strip, aluminium and plastic fittings, plastic trimming\u003c\/li\u003e\n\u003cli\u003eMaterials - Ear Cups: Aluminium\u003c\/li\u003e\n\u003cli\u003eMaterials - Ear Pads: Cloth covered foam\u003c\/li\u003e\n\u003cli\u003eOperating Conditions: +5° C to +45° C, \u0026lt;90% RH; non condensing\u003c\/li\u003e\n\u003cli\u003eTransport\/Storage Conditions: -15° C to +70° C; \u0026lt;90% RH; non condensing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Neumann","offers":[{"title":"Default Title","offer_id":47302797328721,"sku":"53002","price":611.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/NeumannNDH30BlackEdition1.jpg?v=1757848168"},{"product_id":"audeze-lcd-2-classic","title":"Audeze LCD-2 Classic","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eAudeze LCD-2 Classic\u003c\/strong\u003e – affordable open-back headphones with 106 mm planar magnetic drivers, proprietary magnet array, and ultra-thin diaphragms. It offers warm, full, and spacious sound, high efficiency, and comfort for audiophiles and professionals. On board, there is a rich effects section with offset magnetic array, ventilated headband, thick earpads, and extensive performance functions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAudeze LCD-2 Classic\u003c\/strong\u003e is an environment for sound creation designed for realism. It features a lightweight design for long sessions, from simple listening to complex audio setups. Flexible routing with XLR cable and adapters enables a wide range of configurations – including new features for the Audeze ecosystem.\u003c\/p\u003e\n\u003cp\u003eSound is deeply integrated: low distortion, wide frequency response, support for high SPL. Monitoring can be done in real-time – for automatic tuning of sources. The headphones offer up to 5W power handling, replaceable parts, and advanced conditions.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAffordable LCD-series headphone with warm and energetic musical experience\u003c\/li\u003e\n\u003cli\u003ePlanar drivers with offset magnetic array for increased airflow and spatial information\u003c\/li\u003e\n\u003cli\u003eDesigned for long-term comfort with lower weight, ventilated suspension headband, and thick, soft earpads\u003c\/li\u003e\n\u003cli\u003eUnique offset magnet array for broad, deep sense of space and tube-like, forgiving yet clear sound signature\u003c\/li\u003e\n\u003cli\u003eConstructed with special glass-infused nylon rings to reduce weight while maintaining original audible character\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStyle: Over-ear, open-back\u003c\/li\u003e\n\u003cli\u003eTransducer Type: Planar Magnetic\u003c\/li\u003e\n\u003cli\u003eMagnetic Structure: Proprietary magnet array\u003c\/li\u003e\n\u003cli\u003ePhase Management: Non-Fazor\u003c\/li\u003e\n\u003cli\u003eMagnet Type: Neodymium N50\u003c\/li\u003e\n\u003cli\u003eDiaphragm Type: Ultra-thin\u003c\/li\u003e\n\u003cli\u003eTransducer Size: 106 mm\u003c\/li\u003e\n\u003cli\u003eMaximum Power Handling: 5W RMS\u003c\/li\u003e\n\u003cli\u003eMaximum SPL: \u0026gt;130 dB\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 10 Hz - 50 kHz\u003c\/li\u003e\n\u003cli\u003eTHD: \u0026lt;0.1% @ 100 dB\u003c\/li\u003e\n\u003cli\u003eImpedance: 70 ohms\u003c\/li\u003e\n\u003cli\u003eSensitivity: 101 dB\/1 mW (at Drum Reference Point)\u003c\/li\u003e\n\u003cli\u003eMinimum Power Requirement: \u0026gt;100 mW\u003c\/li\u003e\n\u003cli\u003eRecommended Power Level: \u0026gt;250 mW\u003c\/li\u003e\n\u003cli\u003eWeight: 544 g\u003c\/li\u003e\n\u003cli\u003eCable: 4-pin XLR with 1\/4\" TRS adapter\u003c\/li\u003e\n\u003cli\u003eAccessories: Travel case, 1\/4\" to 3.5 mm adapter, warranty card, certificate of authenticity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Audeze","offers":[{"title":"Default Title","offer_id":48158540431697,"sku":"53645","price":747.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/AudezeLCD-2Classic1.jpg?v=1757965003"},{"product_id":"audeze-lcd-x-creator-edition-leather-free","title":"Audeze LCD-X Creator Edition","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eAudeze LCD-X Creator Edition\u003c\/strong\u003e – professional over-ear open-back headphones with 106 mm planar magnetic drivers, Uniforce diaphragms, Fazor waveguides, and powerful neodymium magnets. It offers class-leading resolution, low distortion, high efficiency, and transparency for studio and audiophile use. On board, there is a rich effects section with patented technologies, suspension headband, premium earpads, and extensive performance functions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAudeze LCD-X Creator Edition\u003c\/strong\u003e is an environment for sound creation designed for accuracy and efficiency. It features a lightweight suspension headband for comfort during long sessions, from simple monitoring to complex mixing. Flexible routing with braided OCC copper cable and adapter enables a wide range of configurations – including new features for the Audeze ecosystem.\u003c\/p\u003e\n\u003cp\u003eSound is deeply integrated: extra-large drivers for precision, open-back for natural soundstage, easy to drive from any device. Monitoring can be done in real-time – for automatic tuning of sources. The headphones offer up to 5W power handling, replaceable parts, and advanced conditions.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExtra-large 106mm planar drivers tuned for accuracy, built for precision\u003c\/li\u003e\n\u003cli\u003eOpen-back design for natural soundstage and spatial positioning\u003c\/li\u003e\n\u003cli\u003eHighly efficient, easy to drive from any interface, console, or device\u003c\/li\u003e\n\u003cli\u003eIncludes braided OCC copper 4-pin XLR combo cable with single-ended 1\/4\" adapter and standard LCD travel case\u003c\/li\u003e\n\u003cli\u003eFeatures Ultra-Thin Uniforce diaphragms, Fazor waveguides, and powerful neodymium magnets for accurate and detailed sound\u003c\/li\u003e\n\u003cli\u003eDesigned for comfort with suspension headband for even weight distribution and highly-cushioned premium earpads, preventing listening fatigue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStyle: Over-ear, open-back\u003c\/li\u003e\n\u003cli\u003eTransducer Type: Planar Magnetic\u003c\/li\u003e\n\u003cli\u003eMagnetic Structure: Proprietary magnet array\u003c\/li\u003e\n\u003cli\u003ePhase Management: Fazor\u003c\/li\u003e\n\u003cli\u003eMagnet Type: Neodymium N50\u003c\/li\u003e\n\u003cli\u003eDiaphragm Type: Ultra-Thin Uniforce\u003c\/li\u003e\n\u003cli\u003eTransducer Size: 106 mm\u003c\/li\u003e\n\u003cli\u003eMaximum SPL: \u0026gt;130 dB\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 10 Hz - 50 kHz\u003c\/li\u003e\n\u003cli\u003eTHD: \u0026lt;0.1% @ 100 dB SPL\u003c\/li\u003e\n\u003cli\u003eSensitivity: 103 dB\/1 mW (at Drum Reference Point)\u003c\/li\u003e\n\u003cli\u003eImpedance: 20 ohms\u003c\/li\u003e\n\u003cli\u003eMax Power Handling: 5 W RMS\u003c\/li\u003e\n\u003cli\u003eMin Recommended Power: \u0026gt;100 mW\u003c\/li\u003e\n\u003cli\u003eRecommended Power Level: \u0026gt;250 mW\u003c\/li\u003e\n\u003cli\u003eCable: 1.9 m (6.2 ft) length, XLR termination with single-ended 1\/4\" (6.3 mm) adapter\u003c\/li\u003e\n\u003cli\u003eWire Material: 20 AWG high-purity OCC audio-grade copper\u003c\/li\u003e\n\u003cli\u003eWeight: 612 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Audeze","offers":[{"title":"Default Title","offer_id":48158541250897,"sku":"53637","price":1245.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/products\/0f2ab04d32ee6b2b765f05079e792361_ea9e27ed-46eb-40de-aba7-e8c0ce048907.jpg?v=1709648208"},{"product_id":"audeze-lcd-x-creator-edition","title":"Audeze LCD-X Leather","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eAudeze LCD-X Leather\u003c\/strong\u003e – professional open-back headphones with 106 mm planar magnetic drivers, Uniforce diaphragms, Fazor waveguides, and powerful neodymium magnets. It offers class-leading resolution, low distortion, high efficiency, and transparency for studio and audiophile use. On board, there is a rich effects section with patented technologies, suspension headband, premium leather earpads, and extensive performance functions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAudeze LCD-X Leather\u003c\/strong\u003e is an environment for sound creation designed for accuracy and efficiency. It features a lightweight suspension headband for comfort during long sessions, from simple monitoring to complex mixing. Flexible routing with braided OCC copper cable and adapter enables a wide range of configurations – including new features for the Audeze ecosystem.\u003c\/p\u003e\n\u003cp\u003eSound is deeply integrated: extra-large drivers for precision, open-back for natural soundstage, easy to drive from any device. Monitoring can be done in real-time – for automatic tuning of sources. The headphones offer up to 5W power handling, replaceable parts, and advanced conditions.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExtra-large 106mm planar drivers tuned for accuracy, built for precision\u003c\/li\u003e\n\u003cli\u003eOpen-back design for natural soundstage and spatial positioning\u003c\/li\u003e\n\u003cli\u003eHighly efficient, easy to drive from any interface, console, or device\u003c\/li\u003e\n\u003cli\u003eIncludes braided OCC copper 4-pin XLR combo cable with single-ended 1\/4\" adapter and standard LCD travel case\u003c\/li\u003e\n\u003cli\u003eFeatures Ultra-Thin Uniforce diaphragms, Fazor waveguides, and powerful neodymium magnets for accurate and detailed sound\u003c\/li\u003e\n\u003cli\u003eDesigned for comfort with suspension headband for even weight distribution and highly-cushioned premium leather earpads, preventing listening fatigue\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStyle: Over-ear, open-back\u003c\/li\u003e\n\u003cli\u003eTransducer Type: Planar Magnetic\u003c\/li\u003e\n\u003cli\u003eMagnetic Structure: Proprietary magnet array\u003c\/li\u003e\n\u003cli\u003ePhase Management: Fazor\u003c\/li\u003e\n\u003cli\u003eMagnet Type: Neodymium N50\u003c\/li\u003e\n\u003cli\u003eDiaphragm Type: Ultra-Thin Uniforce\u003c\/li\u003e\n\u003cli\u003eTransducer Size: 106 mm\u003c\/li\u003e\n\u003cli\u003eMaximum SPL: \u0026gt;130 dB\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 10 Hz - 50 kHz\u003c\/li\u003e\n\u003cli\u003eTHD: \u0026lt;0.1% @ 100 dB SPL\u003c\/li\u003e\n\u003cli\u003eSensitivity: 103 dB\/1 mW (at Drum Reference Point)\u003c\/li\u003e\n\u003cli\u003eImpedance: 20 ohms\u003c\/li\u003e\n\u003cli\u003eMax Power Handling: 5 W RMS\u003c\/li\u003e\n\u003cli\u003eMin Recommended Power: \u0026gt;100 mW\u003c\/li\u003e\n\u003cli\u003eRecommended Power Level: \u0026gt;250 mW\u003c\/li\u003e\n\u003cli\u003eCable: 1.9 m (6.2 ft) length, 4-pin XLR with single-ended 1\/4\" (6.3 mm) adapter\u003c\/li\u003e\n\u003cli\u003eWire Material: 20 AWG high-purity OCC audio-grade copper\u003c\/li\u003e\n\u003cli\u003eWeight: 612 g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Audeze","offers":[{"title":"Default Title","offer_id":48158541513041,"sku":"53639","price":1175.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/AudezeLCD-XLeather1.jpg?v=1757961137"},{"product_id":"audeze-mm-100","title":"Audeze MM-100","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eAudeze MM-100\u003c\/strong\u003e – open-back professional headphones with 90 mm Uniforce planar magnetic drivers, Fluxor magnet array, and Fazor phase management. It provides precise production-grade accuracy, durable premium chassis, and versatile high-efficiency performance for studio, travel, or live use. On board, there is a rich effects section with ultra-thin diaphragms, supple gel-filled earpads, adjustable suspension strap, and extensive performance functions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAudeze MM-100\u003c\/strong\u003e is an environment for sound creation designed for versatility. It features lightweight magnesium and steel construction for all-day comfort, from simple playback to complex audio analysis. Flexible routing with single-sided cable and adapter enables a wide range of configurations – including new features for the Audeze ecosystem.\u003c\/p\u003e\n\u003cp\u003eModulation is deeply integrated: tuned for accuracy, low distortion, wide frequency response. Monitoring can be done in real-time – for automatic tuning of sources. The headphones offer up to 5W power handling, replaceable parts, and advanced conditions.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003ePrecise: Audeze planar magnetic drivers tuned for production-grade accuracy\u003c\/li\u003e\n\u003cli\u003eDurable: Premium chassis featuring magnesium and steel\u003c\/li\u003e\n\u003cli\u003eVersatile: High efficiency drivers, works well with a wide variety of equipment\u003c\/li\u003e\n\u003cli\u003ePedigree: Designed in collaboration with Grammy award-winning engineer\/producer Manny Marroquin\u003c\/li\u003e\n\u003cli\u003eEngineered for comfort with supple gel-filled earpads and a feather-light adjustable suspension strap for long sessions\u003c\/li\u003e\n\u003cli\u003eAdaptable with a single-sided cable that can connect to either side, folding flat for travel, and including a soft cover gig bag\u003c\/li\u003e\n\u003cli\u003eTransforms any space into a studio with industry-trusted sound, delivering the artist's intended emotions\u003c\/li\u003e\n\u003cli\u003eFeatures industry-leading driver technology with patented waveguides, magnet arrays, and diaphragms for pinpoint precision and ultra-low distortion\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStyle: Over-ear, open-back\u003c\/li\u003e\n\u003cli\u003eTransducer Type: Planar Magnetic\u003c\/li\u003e\n\u003cli\u003eMagnetic Structure: Fluxor magnet array\u003c\/li\u003e\n\u003cli\u003ePhase Management: Fazor\u003c\/li\u003e\n\u003cli\u003eMagnet Type: Neodymium N50\u003c\/li\u003e\n\u003cli\u003eDiaphragm Type: Ultra-Thin Uniforce\u003c\/li\u003e\n\u003cli\u003eTransducer Size: 90 mm\u003c\/li\u003e\n\u003cli\u003eMaximum SPL: \u0026gt;120 dB\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 20 Hz - 25 kHz\u003c\/li\u003e\n\u003cli\u003eTHD: \u0026lt;0.1% @ 100 dB SPL, 1 kHz\u003c\/li\u003e\n\u003cli\u003eSensitivity: 98 dB\/1 mW (at Drum Reference Point)\u003c\/li\u003e\n\u003cli\u003eImpedance: 18 ohms\u003c\/li\u003e\n\u003cli\u003eMax Power Handling: 5 W RMS\u003c\/li\u003e\n\u003cli\u003eMin Recommended Power: \u0026gt;100 mW\u003c\/li\u003e\n\u003cli\u003eRecommended Power Level: \u0026gt;250 mW\u003c\/li\u003e\n\u003cli\u003eCable: 2.5 m (8.2 ft) Single ended TRRS to 1\/4\" TRS\u003c\/li\u003e\n\u003cli\u003eWeight: 475 g\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Audeze","offers":[{"title":"Default Title","offer_id":48158541611345,"sku":"53642","price":413.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/AudezeMM-1001.jpg?v=1757961048"},{"product_id":"beyerdynamic-dt-990-pro-80-ohm","title":"Beyerdynamic DT-990 Pro 80 Ohm","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eBeyerdynamic DT 990 Pro 80 Ohm\u003c\/strong\u003e – open-back studio headphones with dynamic drivers, analytical sound, and spacious reproduction. It provides detailed highs, intense bass, flexible cabling, and high comfort for mastering and analytical listening. On board, there is a rich effects section with velour earpads, spring steel headband, gold-plated connectors, and extensive performance functions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBeyerdynamic DT 990 Pro 80 Ohm\u003c\/strong\u003e is an environment for sound creation designed for professional studios. It features circumaural open-back design for natural soundstage, from simple playback to complex audio analysis. Flexible routing with straight cable and adapter enables a wide range of configurations – including new features for the Beyerdynamic ecosystem.\u003c\/p\u003e\n\u003cp\u003eSound is deeply integrated: low distortion, wide frequency response, support for high SPL. Monitoring can be done in real-time – for automatic tuning of sources. The headphones offer up to 100 mW power handling, replaceable parts, and advanced conditions.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOpen-back design for spacious sound reproduction\u003c\/li\u003e\n\u003cli\u003eCircumaural, over-ear fit for comfort\u003c\/li\u003e\n\u003cli\u003eRobust spring steel headband\u003c\/li\u003e\n\u003cli\u003eSoft velour earpads\u003c\/li\u003e\n\u003cli\u003eGold-plated stereo jack plug\u003c\/li\u003e\n\u003cli\u003eSingle-sided straight cable\u003c\/li\u003e\n\u003cli\u003eAnalytical sound with distinctive highs and intense bass\u003c\/li\u003e\n\u003cli\u003eMade in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTransducer Type: Dynamic\u003c\/li\u003e\n\u003cli\u003eOperating Principle: Open\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 5 - 35,000 Hz\u003c\/li\u003e\n\u003cli\u003eNominal Impedance: 80 Ω\u003c\/li\u003e\n\u003cli\u003eNominal SPL: 96 dB\u003c\/li\u003e\n\u003cli\u003eMax SPL: 105 dB\u003c\/li\u003e\n\u003cli\u003eTHD: \u0026lt; 0.2%\u003c\/li\u003e\n\u003cli\u003ePower Handling Capacity: 100 mW\u003c\/li\u003e\n\u003cli\u003eSound Coupling: Circumaural\u003c\/li\u003e\n\u003cli\u003eHeadband Pressure: 3.5 N\u003c\/li\u003e\n\u003cli\u003eWeight (without cable): 250 g\u003c\/li\u003e\n\u003cli\u003eCable: 3 m straight\u003c\/li\u003e\n\u003cli\u003eConnector: Gold-plated 3.5 mm stereo jack with 6.3 mm adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Beyerdynamic","offers":[{"title":"Default Title","offer_id":49167548907857,"sku":"52264","price":148.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/BeyerdynamicDT-990Pro80Ohm1.jpg?v=1757960942"},{"product_id":"beyerdynamic-dt-1990-pro-mkii","title":"Beyerdynamic DT-1990 Pro MKII","description":"\u003cp\u003eThe \u003cstrong\u003eBeyerdynamic DT 1990 PRO MKII\u003c\/strong\u003e are premium, open-back Tesla studio headphones for mixing, mastering, and editing, boasting a frequency response of 5-40 kHz, a nominal impedance of 30 ohms, and a nominal sound pressure level of 94 dBSPL.\u003c\/p\u003e\n\n        \u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/WgIvH1WipxQ?si=pjWhCe-Vp79Ng3vq\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen\u003e\u003c\/iframe\u003e\n\n        \u003cp\u003eSecond generation of \u003cstrong\u003eBeyerdynamic\u003c\/strong\u003e's premium studio headphones features new \u003cstrong\u003eTESLA.45\u003c\/strong\u003e drivers.  With a lower impedance of 30 ohms, the MKII headphones easily adapt to a wide range of playback devices without compromising sound quality.\u003c\/p\u003e\n\n        \u003cp\u003eNew \u003cstrong\u003eTESLA.45\u003c\/strong\u003e transducer is developed and manufactured at Beyerdynamic's headquarters in Heilbronn, Germany. Its improved diaphragm minimizes distortion and provides a more precise tonal balance. It also contributes to preventing ear fatigue during extended sessions and delivers cleaner sound compared to the previous generation model.\u003c\/p\u003e\n\n        \u003cp\u003e\u003cstrong\u003eTESLA.45\u003c\/strong\u003e driver's diaphragm is made of PEEK polymer, ensuring deep bass reproduction, while a lighter voice coil made of aluminum-coated copper wire improves high-frequency transmission. Each driver undergoes extensive testing during production to guarantee consistently high sound quality.\u003c\/p\u003e\n\n        \u003cp\u003e\u003cstrong\u003eDT 1990 PRO MKII\u003c\/strong\u003e are ideal for recording, monitoring, and editing musical material, offering a lively sound profile with powerful, deep bass. Their frequency response is quite linear and smooth in the upper midrange, and the high frequencies are balanced, making them a versatile tool for any studio.\u003c\/p\u003e\n\n\n    \u003ch3\u003eDT 1990 PRO MKII Features\u003c\/h3\u003e\n    \u003cul\u003e\n        \u003cli\u003ePremium circumaural studio headphones\u003c\/li\u003e\n\t\t\u003cli\u003eOpen design\u003c\/li\u003e\n        \u003cli\u003eSuitable for a variety of devices thanks to the improved TESLA.45 driver (30 ohms)\u003c\/li\u003e\n\n        \u003cli\u003eIncludes detachable cable (mini-XLR) and extensive accessories\u003c\/li\u003e\n        \u003cli\u003eSuperb wearing comfort\u003c\/li\u003e\n\u003cli\u003eRugged spring steel headband construction\u003c\/li\u003e\n\u003cli\u003eHeadband pad with fontanelle recess for pressure relief\u003c\/li\u003e\n        \u003cli\u003eIdeal for professional mixing, mastering, and editing\u003c\/li\u003e\n        \u003cli\u003eMade in Germany\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003ch3\u003eDT 1990 PRO MKII Specifications\u003c\/h3\u003e\n    \u003cul\u003e\n        \u003cli\u003eWearing Style: Over-ear\u003c\/li\u003e\n        \u003cli\u003eOperating Principle: Open\u003c\/li\u003e\n        \u003cli\u003eTransmission Type: Wired\u003c\/li\u003e\n        \u003cli\u003eRemote: Without Remote\u003c\/li\u003e\n        \u003cli\u003eNominal Impedance Headphones: 30 ohms\u003c\/li\u003e\n        \u003cli\u003eWeight headphones without cable: 376 g\u003c\/li\u003e\n        \u003cli\u003eHeadphone frequency response: 5-40,000 Hz\u003c\/li\u003e\n        \u003cli\u003eNominal sound pressure level: 94 dBSPL (1mW\/500Hz)\u003c\/li\u003e\n        \u003cli\u003eSound Coupling To The Ear: Circumaural (around the ear)\u003c\/li\u003e\n        \u003cli\u003eCable \u0026amp; Plug: 3-pin XLR plug, 6.35 mm (1\/4\") stereo jack plug, 3 m straight cable \u0026amp; 5 m coiled cable\u003c\/li\u003e\n    \u003c\/ul\u003e\n","brand":"Beyerdynamic","offers":[{"title":"Default Title","offer_id":49911764189521,"sku":"55245","price":465.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/BeyerdynamicDT-1990ProMKII1.jpg?v=1757965106"},{"product_id":"beyerdynamic-dt-990-pro-x-48-ohms","title":"Beyerdynamic DT 990 PRO X 48 Ohms","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eBeyerdynamic DT 990 PRO X 48 Ohms\u003c\/strong\u003e – open-back studio headphones featuring the STELLAR.45 driver system, 48-ohm impedance, and a wide frequency response from 5 Hz to 40 kHz. Designed for professional mixing, mastering, and critical listening, they deliver precise imaging, transparent highs, and balanced low-end reproduction. The open construction ensures an airy soundstage and natural dynamics, ideal for long studio sessions.\u003c\/p\u003e\n\u003cp\u003eEquipped with detachable 3 m single-sided cable using a mini-XLR lock and 3.5 mm jack with 6.3 mm adapter, the DT 990 PRO X offers versatile connectivity for audio interfaces, laptops, and studio consoles. Handmade in Germany, they combine robust build quality with premium comfort, using soft replaceable velour earpads and a padded headband to minimize fatigue during extended use.\u003c\/p\u003e\n\u003cp\u003eThe new STELLAR.45 drivers ensure high efficiency and low distortion even at higher sound levels, maintaining detailed and stable reproduction across the full range. With an impedance of 48 ohms, these headphones work equally well with professional and mobile devices, making them a flexible choice for modern production environments.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOpen-back, over-ear design for spacious and natural sound\u003c\/li\u003e\n\u003cli\u003eSTELLAR.45 dynamic driver system made in Germany\u003c\/li\u003e\n\u003cli\u003eImpedance: 48 Ohms – suitable for studio and mobile use\u003c\/li\u003e\n\u003cli\u003eFrequency response: 5 Hz – 40,000 Hz\u003c\/li\u003e\n\u003cli\u003eDetachable 3 m single-sided cable with mini-XLR and 3.5 mm jack\u003c\/li\u003e\n\u003cli\u003eIncludes 6.3 mm adapter\u003c\/li\u003e\n\u003cli\u003eSoft replaceable velour earpads and padded headband\u003c\/li\u003e\n\u003cli\u003eIdeal for mixing, mastering, and high-fidelity listening\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: Open-back, over-ear, dynamic\u003c\/li\u003e\n\u003cli\u003eDriver: STELLAR.45 dynamic transducer, 45 mm\u003c\/li\u003e\n\u003cli\u003eImpedance: 48 Ohms\u003c\/li\u003e\n\u003cli\u003eFrequency response: 5 Hz – 40,000 Hz\u003c\/li\u003e\n\u003cli\u003eSound pressure level (SPL): 98 dB (1 mW \/ 500 Hz)\u003c\/li\u003e\n\u003cli\u003ePower handling capacity: 100 mW\u003c\/li\u003e\n\u003cli\u003eWeight (without cable): approx. 292 g\u003c\/li\u003e\n\u003cli\u003eCable: 3 m detachable, mini-XLR to 3.5 mm TRS, 6.3 mm adapter included\u003c\/li\u003e\n\u003cli\u003eEar pads: Velour, replaceable\u003c\/li\u003e\n\u003cli\u003eMade in Germany\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"BEYERDYNAMIC","offers":[{"title":"Default Title","offer_id":52291814752593,"sku":"58310","price":199.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/BeyerdynamicDT990PROX48Ohms1.jpg?v=1762760494"},{"product_id":"ollo-audio-x1","title":"Ollo Audio X1","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eOLLO Audio X1\u003c\/strong\u003e is an open-back professional studio headphone featuring individual AI calibration and advanced acoustic emulation, designed for precise stereo and binaural monitoring. It combines high-end technology with natural materials and full user-serviceability.\u003c\/p\u003e\n  \u003cp\u003eThe X1 uses individual calibration via the USC II plugin or direct EQ adjustments in hardware systems. Each unit is individually tested, and AI algorithms correct any variations in frequency response caused by material characteristics. The plugin provides multiple listening environment emulations, including studio monitoring, FOH systems and automotive acoustics.\u003c\/p\u003e\n  \u003cp\u003eThe default calibration is optimized for stereo mixing, with instant switching to binaural mode for spatial audio or to the Harman target curve for compatibility checking. The construction uses durable natural materials: aluminum components, American walnut ear-cups and a stainless-steel headband with silicone coating. Perforated hybrid ear-pads made of artificial leather and velour (95\/57.5 mm) ensure long-session comfort.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOpen-back design for precise stereo and binaural monitoring\u003c\/li\u003e\n    \u003cli\u003eIndividual AI calibration for every unit\u003c\/li\u003e\n    \u003cli\u003eSupport for USC II plugin and direct EQ workflows\u003c\/li\u003e\n    \u003cli\u003eAcoustic emulations for studio, FOH and car listening\u003c\/li\u003e\n    \u003cli\u003eStereo, Binaural and Harman Target profiles\u003c\/li\u003e\n    \u003cli\u003e50 mm dynamic drivers with neodymium magnets\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 5 Hz – 22 kHz\u003c\/li\u003e\n    \u003cli\u003eImpedance: 32 Ω – universally compatible\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 101 dB SPL\u003c\/li\u003e\n    \u003cli\u003eUltra-low distortion: \u0026lt;0.05% THD\u003c\/li\u003e\n    \u003cli\u003ePerforated hybrid ear-pads (95\/57.5 mm)\u003c\/li\u003e\n    \u003cli\u003eStainless-steel headband with silicone coating\u003c\/li\u003e\n    \u003cli\u003eAluminum and American walnut ear-cup construction\u003c\/li\u003e\n    \u003cli\u003eDetachable 2 m cable with 2.5 mm connector\u003c\/li\u003e\n    \u003cli\u003e3.5 mm → 6.3 mm adapter included\u003c\/li\u003e\n    \u003cli\u003eFully user-serviceable design\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: Open-back, over-ear\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 5 Hz – 22 kHz\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 101 dB SPL\u003c\/li\u003e\n    \u003cli\u003eImpedance: 32 Ω\u003c\/li\u003e\n    \u003cli\u003eDriver: 50 mm dynamic\u003c\/li\u003e\n    \u003cli\u003eEar-pad size: 95 mm (outer) \/ 57.5 mm (inner)\u003c\/li\u003e\n    \u003cli\u003eCable: 2 m detachable, 2.5 mm connector\u003c\/li\u003e\n    \u003cli\u003eAdapter 6.3 mm: included\u003c\/li\u003e\n    \u003cli\u003eWeight (without cable): approx. 390 g\u003c\/li\u003e\n    \u003cli\u003eMaterials: aluminum, American walnut, stainless steel, silicone\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Ollo Audio","offers":[{"title":"Default Title","offer_id":52382577951057,"sku":"58428","price":522.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/OLLOAudioX11.jpg?v=1765789363"},{"product_id":"audeze-lcd-5s","title":"Audeze LCD-5S","description":"\u003cdiv lang=\"en\"\u003e\n\u003cp\u003e\u003cstrong\u003eAudeze LCD-5s\u003c\/strong\u003e is the latest flagship planar magnetic headphone, representing a significant evolution of the acclaimed LCD-5. The headline innovation is the introduction of \u003cem\u003eSLAM (Symmetric Linear Acoustic Modulator)\u003c\/em\u003e technology, which dramatically enhances bass control and spatial precision without compromising midrange transparency. The headphones utilize 90mm planar drivers featuring nano-scale \u003cem\u003eParallel Uniforce™\u003c\/em\u003e diaphragms, Fluxor™ magnet arrays, and Fazor™ waveguides, delivering ultra-low distortion (less than 0.1%) and a frequency response extending from 5 Hz to 50 kHz.\u003c\/p\u003e\n\u003cp\u003eThe LCD-5s also boasts a refreshed design and improved comfort. The chassis is constructed from lightweight magnesium and carbon fiber, featuring new acetate earcup rings with a glossy tortoiseshell finish and copper accents. Newly sculpted leather earpads ensure better pressure distribution and seal, which is critical for the efficiency of the SLAM technology. Despite a slightly higher weight (475g) compared to its predecessor, the LCD-5s offers superior ergonomics, making it the ultimate tool for mastering engineers and audiophiles seeking uncompromising realism.\u003c\/p\u003e\n\u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSLAM (Symmetric Linear Acoustic Modulator) technology for enhanced bass and imaging\u003c\/li\u003e\n\u003cli\u003e90mm planar drivers with nano-scale Parallel Uniforce™ diaphragms\u003c\/li\u003e\n\u003cli\u003eFluxor™ magnet arrays and Fazor™ phase management\u003c\/li\u003e\n\u003cli\u003eFrequency response of 5 Hz – 50 kHz with \u0026lt;0.1% distortion\u003c\/li\u003e\n\u003cli\u003eMagnesium, carbon fiber, and acetate (tortoiseshell) construction\u003c\/li\u003e\n\u003cli\u003eRefined earpad geometry for improved comfort during long sessions\u003c\/li\u003e\n\u003cli\u003eEngineered for mastering engineers and critical listening applications\u003c\/li\u003e\n\u003cli\u003e30 Ohm impedance, requiring stable high-quality amplification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStyle: Over-ear, open-back\u003c\/li\u003e\n\u003cli\u003eTransducer type: Planar Magnetic, 90 mm\u003c\/li\u003e\n\u003cli\u003eFrequency response: 5 Hz – 50 kHz\u003c\/li\u003e\n\u003cli\u003eImpedance: 30 Ohms\u003c\/li\u003e\n\u003cli\u003eSensitivity: 90 dB\/1mW\u003c\/li\u003e\n\u003cli\u003eMaximum SPL: \u0026gt;130 dB\u003c\/li\u003e\n\u003cli\u003eTHD: \u0026lt;0.1% @ 100 dB SPL\u003c\/li\u003e\n\u003cli\u003eWeight: 475 g (1 lb, 1 oz)\u003c\/li\u003e\n\u003cli\u003eMaximum Power Handling: 5W RMS\u003c\/li\u003e\n\u003cli\u003eRecommended Power Level: \u0026gt;500 mW\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n","brand":"Audeze","offers":[{"title":"Default Title","offer_id":52883680624977,"sku":"58823","price":5473.15,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/AudezeLCD-5S1.jpg?v=1769180533"},{"product_id":"steven-slate-audio-vsx-immersion-one-planar-magnetic-open-back-headphones","title":"Steven Slate Audio VSX Immersion One Planar Magnetic Open Back Headphones","description":"\u003cdiv lang=\"en\"\u003e\n\n  \u003cp\u003e\u003cstrong\u003eSteven Slate Audio VSX Immersion One\u003c\/strong\u003e is an open-back \u003ca href=\"https:\/\/wrdtunes.com\/collections\/headphones\"\u003estudio headphone\u003c\/a\u003e system with planar magnetic drivers and a bundled VSX Platinum license — the flagship evolution of the VSX platform, built for mix engineers and mastering engineers who prioritise an open soundstage, minimal coloration and maximum spatial accuracy. The custom-tuned Sendy Audio 97 mm x 76 mm driver with a 1-micron diaphragm sits inside flame maple wood earcups with an aluminum chassis, providing the hardware foundation for VSX's binaural room modeling to deliver what Steven Slate Audio describes as the closest headphone equivalent to monitoring on real studio speakers.\u003c\/p\u003e\n\n  \u003ch3\u003e1-micron planar driver — the physics behind virtual speakers\u003c\/h3\u003e\n\n  \u003cp\u003ePlanar magnetic drivers distribute the voice coil uniformly across the entire diaphragm surface, eliminating the localised excitation point of dynamic drivers. A 1-micron diaphragm is significantly thinner than those found in standard planar headphones, which means lower moving mass, faster transient response and very low THD even at high listening levels. The open-back architecture removes the pressure buildup of a sealed enclosure, reduces internal standing waves and produces a depth and spatial width that the VSX binaural algorithms can model more convincingly as a three-dimensional speaker-in-room experience. At 32 Ω impedance the Immersion One can be driven from an audio interface headphone output, though planar drivers of this size benefit from a dedicated headphone amplifier for maximum dynamic headroom and low-end control.\u003c\/p\u003e\n\n  \u003ch3\u003eFlame maple, aluminum and hand-wound 6N OCC copper\u003c\/h3\u003e\n\n  \u003cp\u003eThe flame maple earcups damp cabinet resonances differently from plastic or metal — wood's internal damping characteristics affect the coherence of the midrange and high-frequency response in ways that are measurably and audibly distinct. The high-grade aluminum chassis adds structural rigidity without excessive weight. The Y-cable uses 6N OCC copper (99.9999% purity), hand-wound: OCC processing eliminates the grain boundaries present in standard copper that can cause micro-distortions at high frequencies. The cable terminates in a 3.5 mm unbalanced connector with a 1\/4\" adapter included, is detachable, and measures 2.5 m. The package ships with a soft carry case and a full VSX Platinum license covering all current and future acoustic environments.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOpen-back circumaural headphones with planar magnetic drivers\u003c\/li\u003e\n    \u003cli\u003eDriver: Sendy Audio, custom-tuned, 97 mm x 76 mm, 1-micron diaphragm — low THD, fast transient response\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 20 Hz – 40 kHz\u003c\/li\u003e\n    \u003cli\u003eImpedance: 32 Ω\u003c\/li\u003e\n    \u003cli\u003eFlame maple wood earcups, high-grade aluminum chassis\u003c\/li\u003e\n    \u003cli\u003eHand-wound Y-cable, 6N OCC copper (99.9999% purity), 2.5 m, detachable\u003c\/li\u003e\n    \u003cli\u003eConnector: 3.5 mm unbalanced with 1\/4\" adapter included\u003c\/li\u003e\n    \u003cli\u003eVSX Platinum plugin included: AU, VST2, VST3, AAX — macOS and Windows\u003c\/li\u003e\n    \u003cli\u003e24+ environments: mixing studios, mastering rooms, car systems, clubs, consumer devices, headphone models\u003c\/li\u003e\n    \u003cli\u003eLifetime free access to all future VSX environments\u003c\/li\u003e\n    \u003cli\u003eAuthorization: iLok account or physical iLok key\u003c\/li\u003e\n    \u003cli\u003eIncluded: headphones, 6N OCC cable, 1\/4\" adapter, soft carry case, VSX Platinum license\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: open-back, circumaural\u003c\/li\u003e\n    \u003cli\u003eDriver type: planar magnetic\u003c\/li\u003e\n    \u003cli\u003eDriver: Sendy Audio, custom-tuned, 97 mm x 76 mm\u003c\/li\u003e\n    \u003cli\u003eDiaphragm thickness: 1 micron\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 20 Hz – 40 kHz\u003c\/li\u003e\n    \u003cli\u003eImpedance: 32 Ω\u003c\/li\u003e\n    \u003cli\u003eEarcup material: flame maple wood\u003c\/li\u003e\n    \u003cli\u003eChassis material: high-grade aluminum\u003c\/li\u003e\n    \u003cli\u003eCable: Y-type, hand-wound, 6N OCC copper (99.9999% purity), 2.5 m, detachable\u003c\/li\u003e\n    \u003cli\u003eConnector: unbalanced 3.5 mm\u003c\/li\u003e\n    \u003cli\u003eAdapter: 1\/4\" (included)\u003c\/li\u003e\n    \u003cli\u003ePlugin: VSX Platinum Modeling Software\u003c\/li\u003e\n    \u003cli\u003ePlugin formats: AU, VST2, VST3, AAX\u003c\/li\u003e\n    \u003cli\u003eOS — Mac: macOS 10.14 or later (Apple Silicon supported); standalone: macOS 11.7.4+\u003c\/li\u003e\n    \u003cli\u003eOS — PC: Windows 10 or later, 64-bit\u003c\/li\u003e\n    \u003cli\u003eAuthorization: iLok account or physical iLok key (Pace iLok Machine ID or dongle)\u003c\/li\u003e\n    \u003cli\u003eVSX Platinum environments: 24+ (studios, mastering rooms, cars, clubs, consumer devices, headphone models) + lifetime free upgrades\u003c\/li\u003e\n    \u003cli\u003eIncluded in box: Immersion One headphones, 6N OCC cable, 1\/4\" adapter, soft carry case, VSX Platinum license\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n\u003c\/div\u003e","brand":"Steven Slate Audio","offers":[{"title":"Default Title","offer_id":53437469753681,"sku":"58859","price":992.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/StevenSlateAudioVSXImmersionOnePlanarMagnetic1.jpg?v=1776069602"},{"product_id":"aiaiai-tracks-usb-c-w-one-button-mic-black","title":"AIAIAI Tracks USB-C w\/ one button mic Black","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eAIAIAI Tracks USB-C w\/ one button mic Black\u003c\/strong\u003e – on-ear supra-aural wired \u003ca href=\"https:\/\/wrdtunes.com\/collections\/headphones\"\u003eheadphones\u003c\/a\u003e with USB-C connectivity, built around an aluminum brace that functions as a rail system for the sliding ear cups. The 40mm driver covers 20 Hz – 20 kHz at 32 Ω impedance and 70 mW maximum input power. An inline microphone and one-button remote on the USB-C cable handle calls and basic playback commands without touching the source device. Weight: 80 g.\u003c\/p\u003e\n\n  \u003ch3\u003eAluminum rail instead of a plastic headband — a structural difference that matters\u003c\/h3\u003e\n  \u003cp\u003eThe Tracks design is built around an aluminum brace acting as a slide rail — the ear cups travel vertically along it with no hinges, ratchets, or teeth involved, which removes the most common mechanical failure point in this headphone category. Adjustment is smooth and holds its position through repeated folding and storage. The supra-aural fit — resting on the ear rather than enclosing it — keeps the total weight at 80 g and the profile flat enough for easy packing. Interchangeable color sliders in two options allow visual customization without any disassembly of the driver or cable assembly.\u003c\/p\u003e\n\n  \u003ch3\u003eUSB-C direct digital connection — no adapter required\u003c\/h3\u003e\n  \u003cp\u003eThe USB-C variant removes the need for a dongle when connecting to current-generation laptops, tablets, and smartphones that no longer carry a 3.5mm jack. Audio is passed digitally to the headphone's internal DAC, making playback quality independent of the analog output stage built into the source device. The cable's single inline button handles play\/pause, call accept, and voice assistant activation. AIAIAI backs the Tracks with a 3-year warranty and a lifetime trade-in program through their Remixed initiative — relevant for buyers who upgrade regularly and want residual value on the hardware.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: supra-aural (on-ear), wired\u003c\/li\u003e\n    \u003cli\u003eDriver: 40mm, full-spectrum\u003c\/li\u003e\n    \u003cli\u003eConnector: USB-C\u003c\/li\u003e\n    \u003cli\u003eInline microphone: yes — 1-button remote\u003c\/li\u003e\n    \u003cli\u003eHeadband: aluminum brace with sliding rail adjustment\u003c\/li\u003e\n    \u003cli\u003eInterchangeable color sliders in 2 colors\u003c\/li\u003e\n    \u003cli\u003eWeight: 80 g\u003c\/li\u003e\n    \u003cli\u003eWarranty: 3 years\u003c\/li\u003e\n    \u003cli\u003eLifetime trade-in program (Remixed)\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eConstruction type: supra-aural\u003c\/li\u003e\n    \u003cli\u003eDriver diameter: 40mm\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 20 Hz – 20 kHz\u003c\/li\u003e\n    \u003cli\u003eImpedance: 32 Ω\u003c\/li\u003e\n    \u003cli\u003eMax input power: 70 mW\u003c\/li\u003e\n    \u003cli\u003eCable connector: USB-C\u003c\/li\u003e\n    \u003cli\u003eRemote\/mic: 1-button inline\u003c\/li\u003e\n    \u003cli\u003eWeight: 80 g\u003c\/li\u003e\n    \u003cli\u003eColor: Black\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"AIAIAI","offers":[{"title":"Default Title","offer_id":53649338007889,"sku":"59551","price":58.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/AIAIAITracksUSB-Cw_onebuttonmicBlack.jpg?v=1777534354"},{"product_id":"fostex-th919","title":"Fostex TH919","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eFostex TH919\u003c\/strong\u003e is Fostex's flagship next-generation open-back dynamic headphone, launched in the second half of 2025 as the direct successor to the TH909 and the top dynamic model in the TH Premium Series. The 50mm BioDyna mk2 driver features an updated voice coil and reinforced diaphragm surround, the solid Japanese maple housing carries Urushi lacquer with a sulfur-smoked silver foil pattern, and the open chamber uses double-layer precision-machined aluminium apertures. Magnesium alloy mechanical components reduce weight by approximately 20% compared to the aluminium used in the previous generation. Mk2 earpads in a new dual-layer configuration with silk protein and sheepskin leather. Hand-assembled in Japan.\u003c\/p\u003e\n\n  \u003ch3\u003eBioDyna mk2 driver and open chamber with double-layer aluminium apertures\u003c\/h3\u003e\n  \u003cp\u003eThe 50mm BioDyna mk2 transducer in the TH919 is the updated version of the TH909 unit — a new voice coil and reinforced diaphragm surround reduce distortion and artifacts in the bass range while fully preserving the character and resolution of the predecessor. Magnetic flux density: 1.5 Tesla. The bio-cellulose and composite fiber diaphragm with a free-edge design delivers a frequency response of 12.5–40,000 Hz — this range differs from the TH909 specification (5–45,000 Hz) and reflects updated housing tuning. The TH919's open chamber uses double-layer precision-machined aluminium apertures with a calibrated opening ratio — the same technique as in the TH1100RPmk2 — for an optimal balance between soundstage width and resonance control. Impedance: 25 Ω, sensitivity: 100 dB\/mW, maximum input: 1,800 mW. Weight: approx. 385 g.\u003c\/p\u003e\n\n  \u003ch3\u003eJapanese maple with Urushi lacquer and sulfur-smoked silver foil: Sakamoto craftsmanship on a new platform\u003c\/h3\u003e\n  \u003cp\u003eThe solid Japanese maple housing — a hard maple with acoustic properties comparable to lutherie tonewoods — is finished with Urushi lacquer by the Sakamoto Otosho Shoten factory, established in 1900. In the TH919, Fostex applies a sulfur-smoked silver foil technique over the base black lacquer: several types of foil applied in a torn-paper manner build a multi-layered depth and a unique pattern per unit. Mechanical components including the base plate and yoke are machined from magnesium alloy — approximately 20% lighter than the aluminium used in the previous generation. Mk2 earpads: dual-layer foam with silk protein synthetic leather covered by natural sheepskin leather — identical configuration to the TH1000RPmk2 and TH1100RPmk2. Included cable: 2 m, 7N OFC, 6.3mm plug, 2-pin connector with rhodium-plated contacts on a gold-plated base. Balanced connection via the optional XLR cable (ET-H3.0N7BL) and 4.4mm cable (ET-TH4.4BL). Leather carrying pouch included.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOpen-back dynamic design — Fostex next-generation flagship dynamic headphone, successor to TH909\u003c\/li\u003e\n    \u003cli\u003e50mm BioDyna mk2 driver: bio-cellulose diaphragm, updated voice coil, reinforced surround, 1.5 Tesla\u003c\/li\u003e\n    \u003cli\u003eSolid Japanese maple housing + Urushi lacquer with sulfur-smoked silver foil (Sakamoto factory, est. 1900) — each unit unique\u003c\/li\u003e\n    \u003cli\u003eOpen chamber with double-layer precision-machined aluminium apertures — calibrated opening ratio\u003c\/li\u003e\n    \u003cli\u003eMechanical components: magnesium alloy — approx. 20% weight reduction vs. aluminium\u003c\/li\u003e\n    \u003cli\u003eMk2 earpads: dual-layer foam + silk protein synthetic leather + natural sheepskin leather\u003c\/li\u003e\n    \u003cli\u003eIncluded cable: 2 m, 7N OFC, 6.3mm plug\u003c\/li\u003e\n    \u003cli\u003e2-pin connector with rhodium-plated contacts on gold-plated base\u003c\/li\u003e\n    \u003cli\u003eOptional balanced cables: XLR ET-H3.0N7BL, 4.4mm ET-TH4.4BL (sold separately)\u003c\/li\u003e\n    \u003cli\u003eIncluded accessories: leather carrying pouch\u003c\/li\u003e\n    \u003cli\u003eHand-assembled, manufactured in Japan\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: open-back, over-ear, dynamic\u003c\/li\u003e\n    \u003cli\u003eDriver: 50mm BioDyna mk2 (bio-cellulose + composite fibers), neodymium magnet, 1.5 T\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 12.5 Hz – 40,000 Hz\u003c\/li\u003e\n    \u003cli\u003eImpedance: 25 Ω\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 100 dB\/mW\u003c\/li\u003e\n    \u003cli\u003eMaximum input power: 1,800 mW\u003c\/li\u003e\n    \u003cli\u003eWeight: approx. 385 g (without cable)\u003c\/li\u003e\n    \u003cli\u003eHousing: solid Japanese maple + Urushi lacquer with sulfur-smoked silver foil (Sakamoto); double-layer machined aluminium apertures\u003c\/li\u003e\n    \u003cli\u003eMechanical components: magnesium alloy\u003c\/li\u003e\n    \u003cli\u003eEarpads: dual-layer foam + silk protein synthetic leather + natural sheepskin leather\u003c\/li\u003e\n    \u003cli\u003eIncluded cable: 2 m, 7N OFC, 6.3mm plug\u003c\/li\u003e\n    \u003cli\u003eCable connector: 2-pin, rhodium-plated on gold-plated base\u003c\/li\u003e\n    \u003cli\u003eOptional balanced cables: XLR ET-H3.0N7BL, 4.4mm ET-TH4.4BL\u003c\/li\u003e\n    \u003cli\u003eAccessories: leather carrying pouch\u003c\/li\u003e\n    \u003cli\u003eManufacturing: hand-assembled in Japan\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOSTEX","offers":[{"title":"Default Title","offer_id":53693018177873,"sku":"59484","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FostexTH9191.jpg?v=1778412592"},{"product_id":"fostex-th909","title":"Fostex TH909","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eFostex TH909\u003c\/strong\u003e is Fostex's flagship open-back dynamic headphone — the successor to the closed-back TH900mk2, expanding its platform with an open acoustic chamber, double-layer etched metal grille, and a redesigned acoustic path. The 50mm BioDyna driver with 1.5 Tesla neodymium repulsion magnet circuit is carried over from the TH900mk2; the open architecture widens the soundstage and improves stereo image separation at the cost of passive isolation. The Japanese ornamental cherry birch housing is finished in bordeaux Urushi lacquer by the Sakamoto factory. A headphone stand is included in the full accessory package — the key differentiator from the TH909LE. Hand-assembled in Japan.\u003c\/p\u003e\n\n  \u003ch3\u003eOpen chamber with double-layer grille and 1.5 T repulsion driver: full dynamics without closed-back loading\u003c\/h3\u003e\n  \u003cp\u003eThe 50mm BioDyna driver with repulsion magnet circuit at 1.5 Tesla magnetic flux density operates in an open acoustic chamber — eliminating the acoustic pressure that builds on the inner side of the earcup in closed designs and allowing the diaphragm to work under minimal additional acoustic loading. The result is a wide, spacious soundstage with precise instrument localization and depth of field. The double-layer etched metal grille diversifies the resonance points of the housing, preventing energy concentration at specific frequencies — while also providing the housing's characteristic visual depth. The BioDyna diaphragm in bio-cellulose and composite fibers delivers low specific gravity, high Young's modulus, high internal loss, and a free-edge design. Frequency response: 5–45,000 Hz, impedance: 25 Ω, sensitivity: 100 dB\/mW, maximum input: 1,800 mW. The TH909 rewards careful amplifier matching — its 25 Ω impedance and high sensitivity allow portable source driving, but full resolution potential emerges with higher-quality headphone amplifiers.\u003c\/p\u003e\n\n  \u003ch3\u003eSakamoto bordeaux Urushi lacquer, included headphone stand and complete flagship package\u003c\/h3\u003e\n  \u003cp\u003eThe Japanese ornamental cherry birch housing is finished in bordeaux Urushi lacquer — handcrafted by artisans at the Sakamoto Otosho Shoten factory, established in 1900. The technique involves applying a base black lacquer and an adhesive layer, over which several types of sulfur-smoked silver foil are applied in a torn-paper manner — creating a depth and layering effect unique to each individual unit. Japanese ornamental cherry birch used in the housing has acoustic properties comparable to lutherie tonewoods. Low-resilience urethane earpads covered in high-grade synthetic leather. Included cable: 3 m, 7N OFC, 6.3mm plug, 2-pin connector with rhodium-plated contacts. Balanced connection via the optional XLR cable (ET-H3.0N7BL). The full accessory set includes a headphone stand — the element distinguishing the TH909 from the TH909LE — and a synthetic leather carrying bag. Manufactured and hand-assembled in Japan.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOpen-back dynamic design — Fostex flagship headphone, successor to TH900mk2\u003c\/li\u003e\n    \u003cli\u003e50mm BioDyna driver: bio-cellulose diaphragm, neodymium repulsion magnet circuit, 1.5 Tesla magnetic flux density\u003c\/li\u003e\n    \u003cli\u003eOpen acoustic chamber — expanded soundstage, precise localization, no closed-back pressure loading\u003c\/li\u003e\n    \u003cli\u003eDouble-layer etched metal grille — resonance point diversification\u003c\/li\u003e\n    \u003cli\u003eJapanese ornamental cherry birch housing with bordeaux Urushi lacquer (Sakamoto factory, est. 1900) — each unit unique\u003c\/li\u003e\n    \u003cli\u003eLow-resilience urethane earpads + high-grade synthetic leather\u003c\/li\u003e\n    \u003cli\u003eIncluded cable: 3 m, 7N OFC, 6.3mm plug\u003c\/li\u003e\n    \u003cli\u003e2-pin connector with rhodium-plated contacts\u003c\/li\u003e\n    \u003cli\u003eBalanced XLR connection via ET-H3.0N7BL (sold separately)\u003c\/li\u003e\n    \u003cli\u003eIncluded accessories: headphone stand + synthetic leather carrying bag\u003c\/li\u003e\n    \u003cli\u003eHand-assembled, manufactured in Japan\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: open-back, over-ear, dynamic\u003c\/li\u003e\n    \u003cli\u003eDriver: 50mm BioDyna (bio-cellulose + composite fibers), neodymium repulsion magnet circuit, 1.5 T\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 5 Hz – 45,000 Hz\u003c\/li\u003e\n    \u003cli\u003eImpedance: 25 Ω\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 100 dB\/mW\u003c\/li\u003e\n    \u003cli\u003eMaximum input power: 1,800 mW\u003c\/li\u003e\n    \u003cli\u003eWeight: approx. 385 g (without cable)\u003c\/li\u003e\n    \u003cli\u003eHousing: Japanese ornamental cherry birch + bordeaux Urushi lacquer (Sakamoto), double-layer etched metal grille\u003c\/li\u003e\n    \u003cli\u003eEarpads: low-resilience urethane foam + high-grade synthetic leather\u003c\/li\u003e\n    \u003cli\u003eIncluded cable: 3 m, 7N OFC, 6.3mm plug\u003c\/li\u003e\n    \u003cli\u003eCable connector: 2-pin, rhodium-plated\u003c\/li\u003e\n    \u003cli\u003eBalanced cable: XLR ET-H3.0N7BL (sold separately)\u003c\/li\u003e\n    \u003cli\u003eAccessories: headphone stand, synthetic leather carrying bag\u003c\/li\u003e\n    \u003cli\u003eManufacturing: hand-assembled in Japan\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOSTEX","offers":[{"title":"Default Title","offer_id":53693018243409,"sku":"59516","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FostexTH9091.jpg?v=1778412566"},{"product_id":"fostex-th909le","title":"Fostex TH909LE","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eFostex TH909LE\u003c\/strong\u003e is the Limited Edition variant of Fostex's flagship open-back dynamic headphone TH909, available from March 2026. The technical foundation is unchanged from the TH909: the 50mm BioDyna driver with 1.5 Tesla neodymium magnet, Japanese ornamental cherry birch housing with Urushi lacquer applied by Sakamoto craftsmen, double-layer etched metal grille, and low-resilience synthetic leather earpads. The distinction between the TH909 and TH909LE is solely in the accessory package: the LE version omits the headphone stand included as standard with the TH909 — enabling a lower retail positioning while delivering the identical acoustic platform and build quality.\u003c\/p\u003e\n\n  \u003ch3\u003eBioDyna 1.5 T driver with repulsion magnet and open double-grille acoustics\u003c\/h3\u003e\n  \u003cp\u003eThe 50mm BioDyna driver uses a neodymium magnet with a repulsion magnetic circuit at 1.5 Tesla flux density — the same circuit type as in the closed TH900mk2, adapted for the open acoustic chamber through a redesigned acoustic path and tuning. The BioDyna diaphragm in bio-cellulose and composite fibers delivers low specific gravity, high Young's modulus, and high internal loss — translating to fast transient response, rich low frequencies, natural midrange, and an extended high-frequency range reaching 45,000 Hz. The open acoustic chamber uses a double-layer etched metal grille that diversifies resonance points and allows free airflow, widening the soundstage relative to the closed TH900mk2. Frequency response: 5–45,000 Hz, impedance: 25 Ω, sensitivity: 100 dB\/mW, maximum input: 1,800 mW. Weight: approx. 385 g.\u003c\/p\u003e\n\n  \u003ch3\u003eUrushi lacquer by Sakamoto, low-resilience earpads and a stand-free accessory set\u003c\/h3\u003e\n  \u003cp\u003eThe Japanese ornamental cherry birch housing is finished with Urushi lacquer produced exclusively by the Sakamoto Otosho Shoten factory, established in 1900. Over a base black lacquer, several types of silver foil smoked with sulfur are applied in a torn-paper manner — building depth and layering in the finish that makes each individual housing unique. Earpads are low-resilience urethane foam covered in high-grade synthetic leather, conforming to the shape of the outer ear. Included cable: 3 m, 7N OFC, 6.3mm plug, 2-pin connector with rhodium-plated contacts. Balanced connection via the optional XLR cable (ET-H3.0N7BL). The LE version does not include the headphone stand supplied with the standard TH909 — in all other respects of accessories and construction it is identical. Available from March 2026.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOpen-back dynamic design — Fostex TH909 flagship in LE form without headphone stand\u003c\/li\u003e\n    \u003cli\u003e50mm BioDyna driver: bio-cellulose diaphragm, neodymium repulsion magnet circuit, 1.5 Tesla magnetic flux density\u003c\/li\u003e\n    \u003cli\u003eIdentical acoustic platform and build quality to TH909 — difference limited to accessory package only\u003c\/li\u003e\n    \u003cli\u003eJapanese ornamental cherry birch housing with Urushi lacquer (Sakamoto factory, est. 1900) — sulfur-smoked silver foil, each unit unique\u003c\/li\u003e\n    \u003cli\u003eDouble-layer etched metal grille — resonance point diversification, unrestricted airflow\u003c\/li\u003e\n    \u003cli\u003eLow-resilience urethane earpads + high-grade synthetic leather\u003c\/li\u003e\n    \u003cli\u003eIncluded cable: 3 m, 7N OFC, 6.3mm plug\u003c\/li\u003e\n    \u003cli\u003e2-pin connector with rhodium-plated contacts\u003c\/li\u003e\n    \u003cli\u003eBalanced XLR connection via ET-H3.0N7BL (sold separately)\u003c\/li\u003e\n    \u003cli\u003eLE vs TH909: headphone stand not included\u003c\/li\u003e\n    \u003cli\u003eAvailable from March 2026\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: open-back, over-ear, dynamic\u003c\/li\u003e\n    \u003cli\u003eDriver: 50mm BioDyna (bio-cellulose + composite fibers), neodymium repulsion magnet circuit, 1.5 T\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 5 Hz – 45,000 Hz\u003c\/li\u003e\n    \u003cli\u003eImpedance: 25 Ω\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 100 dB\/mW\u003c\/li\u003e\n    \u003cli\u003eMaximum input power: 1,800 mW\u003c\/li\u003e\n    \u003cli\u003eWeight: approx. 385 g (without cable)\u003c\/li\u003e\n    \u003cli\u003eHousing: Japanese ornamental cherry birch + Urushi lacquer (Sakamoto), double-layer etched metal grille\u003c\/li\u003e\n    \u003cli\u003eEarpads: low-resilience urethane foam + high-grade synthetic leather\u003c\/li\u003e\n    \u003cli\u003eIncluded cable: 3 m, 7N OFC, 6.3mm plug\u003c\/li\u003e\n    \u003cli\u003eCable connector: 2-pin, rhodium-plated\u003c\/li\u003e\n    \u003cli\u003eBalanced cable: XLR ET-H3.0N7BL (sold separately)\u003c\/li\u003e\n    \u003cli\u003eLE vs TH909 difference: headphone stand not included\u003c\/li\u003e\n    \u003cli\u003eAvailable from March 2026\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOSTEX","offers":[{"title":"Default Title","offer_id":53693019816273,"sku":"59493","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FostexTH909LE1.jpg?v=1778412543"},{"product_id":"fostex-th1100rpmk2","title":"Fostex TH1100RPmk2","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eFostex TH1100RPmk2\u003c\/strong\u003e is Fostex's flagship open-back planar headphone — the mk2 revision of the TH1100RP, incorporating redesigned air damping control inside the transducer, new earpads, and a transition from aluminium to magnesium alloy for all mechanical components. The RP (Regular Phase) driver is a technology Fostex has been refining since 1974; in the TH1100RPmk2 it uses the largest fully driven planar diaphragm Fostex has ever produced in a headphone. The solid Japanese maple housing is dyed using Awa Aizome — traditional Japanese indigo dyeing with plant-based Hon-ai dye from Tokushima Prefecture, applied by hand over several days with curing intervals between coats. The open acoustic chamber of the TH1100RPmk2 features double-layered precision-machined aluminium apertures with a carefully calibrated opening ratio.\u003c\/p\u003e\n\n  \u003ch3\u003eRP mk2 driver with air damping control for optimized diaphragm amplitude\u003c\/h3\u003e\n  \u003cp\u003eThe defining change between the TH1100RP and the mk2 is inside the transducer: air damping control has been optimized through revised airflow geometry using new damping materials, complemented by new earpads that alter the acoustic conditions directly in front of the diaphragm. The result is better control of diaphragm amplitude in the low-frequency range without compromising transient speed or resolution in the midrange and treble. The fully driven RP planar driver differs from conventional planar designs in that the magnetic field covers the entire diaphragm surface in uniform phase — eliminating localized diaphragm deformation and reducing non-stationary resonances. The TH1100RPmk2's magnetic circuit uses an increased number of magnets sandwiching the diaphragm, a newly designed printed coil pattern and shape, and redesigned magnetic flux distribution components. Frequency response: 5–40,000 Hz, impedance: 32 Ω.\u003c\/p\u003e\n\n  \u003ch3\u003eAwa Aizome housing, double aluminium apertures and magnesium alloy 20% lighter than aluminium\u003c\/h3\u003e\n  \u003cp\u003eThe solid Japanese maple housing is dyed with Hon-ai — plant-based natural indigo historically used in Japan, including by Hokusai in the Thirty-six Views of Mount Fuji woodblock print series. The dyeing process takes several days with curing intervals; temperature and humidity affect the penetration of dye pigment into the wood grain, making every unit unique in depth and distribution of color. Dense Japanese maple does not introduce its own tonal coloration due to its material properties — delivering firm, deep bass and clear, resonant treble. The open chamber features double-layered precision-machined aluminium apertures with a calibrated opening ratio optimized for soundstage reproduction and minimal listening fatigue. Mechanical components including the housing base plate and yoke are machined from magnesium alloy, reducing overall weight by 20% compared to the aluminium used in the previous generation. Weight: approx. 420 g. Mk2 earpads: dual-layer foam with silk protein synthetic leather covered by natural sheepskin leather. Included cable: 2 m Y-type unbalanced, 7N OFC, 6.3mm plug with rhodium-plated contacts on gold-plated base. Optional cables: XLR ET-H3.0N7BL (balanced) and ET-TH4.4BL (4.4mm \/ 5-pin). Leather carrying pouch included.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOpen-back planar design — Fostex flagship RP headphone\u003c\/li\u003e\n    \u003cli\u003eRP mk2 driver: largest fully driven planar diaphragm in Fostex headphone history, Regular Phase technology since 1974\u003c\/li\u003e\n    \u003cli\u003eMk2 optimization: air damping control inside driver + revised damping materials + new earpads for optimized diaphragm amplitude in low frequencies\u003c\/li\u003e\n    \u003cli\u003eHousing: solid Japanese maple dyed with Awa Aizome (Hon-ai, plant-based natural indigo, Tokushima) — hand-dyed over several days, each unit unique\u003c\/li\u003e\n    \u003cli\u003eOpen chamber: double-layered precision-machined aluminium apertures with calibrated opening ratio\u003c\/li\u003e\n    \u003cli\u003eMechanical components: magnesium alloy — 20% weight reduction vs. aluminium\u003c\/li\u003e\n    \u003cli\u003eMk2 earpads: dual-layer foam + silk protein synthetic leather + natural sheepskin leather\u003c\/li\u003e\n    \u003cli\u003eIncluded cable: 2 m Y-type, 7N OFC, 6.3mm plug, detachable 2-pin rhodium-plated connector\u003c\/li\u003e\n    \u003cli\u003eOptional cables: XLR ET-H3.0N7BL (balanced) and ET-TH4.4BL (4.4mm \/ 5-pin)\u003c\/li\u003e\n    \u003cli\u003eHand-assembled unit by unit, manufactured in Japan\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: open-back, over-ear, planar magnetic\u003c\/li\u003e\n    \u003cli\u003eDriver: RP planar magnetic (fully driven, Regular Phase), largest RP diaphragm in Fostex history\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 5 Hz – 40,000 Hz\u003c\/li\u003e\n    \u003cli\u003eImpedance: 32 Ω\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 96 dB\/mW\u003c\/li\u003e\n    \u003cli\u003eMaximum input power: 3,000 mW\u003c\/li\u003e\n    \u003cli\u003eWeight: approx. 420 g (without cable)\u003c\/li\u003e\n    \u003cli\u003eHousing: solid Japanese maple + Awa Aizome (Hon-ai), double-layered aluminium apertures\u003c\/li\u003e\n    \u003cli\u003eMechanical components: magnesium alloy\u003c\/li\u003e\n    \u003cli\u003eEarpads: dual-layer foam + silk protein synthetic leather + natural sheepskin leather\u003c\/li\u003e\n    \u003cli\u003eIncluded cable: 2 m Y-type, 7N OFC, 6.3mm plug\u003c\/li\u003e\n    \u003cli\u003eCable connector: 2-pin, rhodium-plated on gold-plated base\u003c\/li\u003e\n    \u003cli\u003eOptional balanced cables: XLR ET-H3.0N7BL, 4.4mm ET-TH4.4BL\u003c\/li\u003e\n    \u003cli\u003eAccessories: leather carrying pouch\u003c\/li\u003e\n    \u003cli\u003eManufacturing: hand-assembled in Japan\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOSTEX","offers":[{"title":"Default Title","offer_id":53693019914577,"sku":"59500","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FostexTH1100RPmk21.jpg?v=1778412523"},{"product_id":"fostex-th616","title":"Fostex TH616","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eFostex TH616\u003c\/strong\u003e is an open-back over-ear headphone released to commemorate Fostex's 50th anniversary as a limited-edition model — CNC-milled from solid black walnut with an aperture pattern referencing traditional Japanese woodcraft and the natural phenomenon of sunlight filtering through tree canopies. The 50mm BioDyna driver with a 1 Tesla magnetic circuit positions the TH616 one step below the TH808 and TH909 (1.5 T) while sharing the same diaphragm architecture and the same wood-housing tuning philosophy. Hand-assembled unit by unit in Japan. Despite the original limited-edition designation, the TH616 has entered Fostex's regular global catalog and remains available through international distribution.\u003c\/p\u003e\n\n  \u003ch3\u003eMilled black walnut housing: aperture geometry as modal damping tool\u003c\/h3\u003e\n  \u003cp\u003eEach opening in the TH616's housing is precisely dimensioned to avoid generating resonance at specific frequencies — the aperture pattern is not purely aesthetic but functions as a modal vibration suppressor by eliminating surface symmetry on the enclosure. Solid black walnut has higher density and internal damping than the acacia used in the TH810\/818, giving the TH616 a darker, more focused housing resonance that acoustically aligns it closer to the TH808. The baffle plate is made from high-specific-gravity resin, a material selected specifically to minimize resonance noise — translating according to Fostex into higher resolution, a richer midrange, and better-controlled bass reproduction. All mechanical components including the yoke and headband adjustment are machined from aluminium for rigidity without added weight. Internal wiring is 7N-grade OFC.\u003c\/p\u003e\n\n  \u003ch3\u003eBioDyna 1 T driver, low-resilience earpads and HiFC cable\u003c\/h3\u003e\n  \u003cp\u003eThe 50mm BioDyna transducer with a neodymium magnet at 1 Tesla magnetic flux density delivers a wide dynamic range at low distortion — the lower magnetic field relative to the TH808\/818\/810 (1.5 T) places the driver at a different operating point, which informs the TH616's distinct bass character and transient behavior. The bio-cellulose and composite fiber diaphragm is constructionally identical to higher models — low specific gravity, high Young's modulus, high internal loss, and a free-edge design for linear large-amplitude reproduction in the low midrange. Earpads use low-resilience urethane foam covered in high-grade synthetic leather — soft, wear-resistant, and comfortable during extended sessions. Included cable: 3 m Y-type, pure copper HiFC (high-performance copper with specialized processing), terminating in a 6.3mm plug. Detachable 2-pin connector with rhodium-plated contacts on both ends. Balanced connection via the optional XLR cable ET-H3.0N7BL.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOpen-back over-ear design — limited-edition Fostex 50th anniversary model, now in regular global catalog\u003c\/li\u003e\n    \u003cli\u003eCNC-milled solid black walnut housing — aperture pattern referencing Japanese woodcraft and komorebi (light through leaves)\u003c\/li\u003e\n    \u003cli\u003eAperture geometry engineered to eliminate modal vibrations and suppress resonance at specific frequencies\u003c\/li\u003e\n    \u003cli\u003e50mm BioDyna driver: bio-cellulose diaphragm, neodymium magnet, 1 Tesla magnetic flux density\u003c\/li\u003e\n    \u003cli\u003eHigh-specific-gravity resin baffle plate — resonance noise reduction for improved resolution and midrange\u003c\/li\u003e\n    \u003cli\u003eAll-aluminium mechanical components\u003c\/li\u003e\n    \u003cli\u003eEarpads: low-resilience urethane foam + high-grade synthetic leather\u003c\/li\u003e\n    \u003cli\u003eDetachable cable: 3 m Y-type, pure copper HiFC, 6.3mm plug\u003c\/li\u003e\n    \u003cli\u003eInternal wiring: 7N OFC\u003c\/li\u003e\n    \u003cli\u003e2-pin connector with rhodium-plated contacts on both ends\u003c\/li\u003e\n    \u003cli\u003eBalanced XLR connection via ET-H3.0N7BL (sold separately)\u003c\/li\u003e\n    \u003cli\u003eHand-assembled unit by unit, manufactured in Japan\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: open-back, over-ear\u003c\/li\u003e\n    \u003cli\u003eDriver: 50mm BioDyna (bio-cellulose + composite fibers), neodymium magnet, 1 T magnetic flux density\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 5 Hz – 45,000 Hz\u003c\/li\u003e\n    \u003cli\u003eImpedance: 25 Ω\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 96 dB\/mW\u003c\/li\u003e\n    \u003cli\u003eMaximum input power: 1,800 mW\u003c\/li\u003e\n    \u003cli\u003eWeight: approx. 370 g (without cable)\u003c\/li\u003e\n    \u003cli\u003eHousing: solid black walnut (CNC-milled), high-specific-gravity resin baffle plate\u003c\/li\u003e\n    \u003cli\u003eMechanical components: aluminium\u003c\/li\u003e\n    \u003cli\u003eEarpads: low-resilience urethane foam + high-grade synthetic leather\u003c\/li\u003e\n    \u003cli\u003eInternal wiring: 7N OFC\u003c\/li\u003e\n    \u003cli\u003eIncluded cable: 3 m Y-type, pure copper HiFC, 6.3mm plug\u003c\/li\u003e\n    \u003cli\u003eCable connector: 2-pin, rhodium-plated contacts (both ends)\u003c\/li\u003e\n    \u003cli\u003eBalanced cable: XLR ET-H3.0N7BL (sold separately)\u003c\/li\u003e\n    \u003cli\u003eManufacturing: hand-assembled in Japan\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOSTEX","offers":[{"title":"Default Title","offer_id":53693019947345,"sku":"59505","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FostexTH6161.jpg?v=1778412508"},{"product_id":"fostex-th808","title":"Fostex TH808","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eFostex TH808\u003c\/strong\u003e is an open-back over-ear headphone derived directly from the TH909 flagship — sharing the identical 50mm BioDyna driver but housed in a matte black walnut enclosure with machined aluminium components in place of the TH909's Japanese-lacquered maple. The TH808 sits above the TH818 in Fostex's lineup with a wider stated frequency range (5–45,000 Hz) and a housing material with a distinct acoustic character. Black walnut — used in lutherie for its density and internal damping — gives the TH808 a darker, more focused housing resonance compared to the acacia of the TH818. Hand-assembled in Japan.\u003c\/p\u003e\n\n  \u003ch3\u003eTH909 driver in a black walnut housing: identical resolution, different acoustic character\u003c\/h3\u003e\n  \u003cp\u003eThe 50mm BioDyna transducer with a neodymium magnet at 1.5 T magnetic flux density comes directly from the TH900 series — a bio-cellulose and composite fiber diaphragm combining low specific gravity with high Young's modulus and high internal loss, translating to fast transient response and midrange clarity without smearing. The 5–45,000 Hz frequency range extends deeper at the low end (5 Hz versus 12.5 Hz in the TH810\/818) and higher into the ultrasonic region (45 kHz versus 40 kHz), reflecting differences in housing tuning and acoustic loading. At 25 Ω impedance and 100 dB\/mW sensitivity, the TH808 drives from a portable amplifier or headphone output of an audio interface or instrument without issue; the 1,800 mW maximum input rating ensures compatibility with high-output desktop headphone amplifiers. The matte black walnut housing shows individual grain and texture variation per unit; machined aluminium components complement the wood, reducing resonance and keeping weight in check.\u003c\/p\u003e\n\n  \u003ch3\u003eLow-resilience earpads and dual-sided cable routing\u003c\/h3\u003e\n  \u003cp\u003eThe TH808's earpads use low-resilience urethane foam covered in high-grade synthetic leather — identical in construction to the TH909's pads, conforming to the shape of the outer ear and improving passive isolation at the rear of the cup. The cable is routed bilaterally via Y-type dual 2-pin connectors with rhodium-plated contacts on a gold-plated base, providing mechanical symmetry and even cable tension across both sides. Included cable: 3 m, 7N oxygen-free copper, terminating in a gold-plated 6.3mm plug. Balanced connection is supported via the separately purchased XLR cable (ET-H3.0N7BL). A synthetic leather carrying pouch is included.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOpen-back over-ear design derived from flagship TH909 — identical driver unit\u003c\/li\u003e\n    \u003cli\u003e50mm BioDyna driver: bio-cellulose diaphragm, neodymium magnet, 1.5 T magnetic flux density\u003c\/li\u003e\n    \u003cli\u003eMatte black walnut solid wood housing + machined aluminium components\u003c\/li\u003e\n    \u003cli\u003eLow-resilience urethane earpads + high-grade synthetic leather covering\u003c\/li\u003e\n    \u003cli\u003eY-type dual-sided cable routing: 2 x 2-pin connector, rhodium-plated on gold-plated base\u003c\/li\u003e\n    \u003cli\u003eDetachable cable: 3 m, 7N OFC, gold-plated 6.3mm plug\u003c\/li\u003e\n    \u003cli\u003eBalanced XLR connection supported via ET-H3.0N7BL cable (sold separately)\u003c\/li\u003e\n    \u003cli\u003eInternal wiring: 7N OFC\u003c\/li\u003e\n    \u003cli\u003eIncluded: synthetic leather carrying pouch\u003c\/li\u003e\n    \u003cli\u003eHand-assembled, manufactured in Japan\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: open-back, over-ear\u003c\/li\u003e\n    \u003cli\u003eDriver: 50mm BioDyna (bio-cellulose + composite fibers), neodymium magnet, 1.5 T\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 5 Hz – 45,000 Hz\u003c\/li\u003e\n    \u003cli\u003eImpedance: 25 Ω\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 100 dB\/mW\u003c\/li\u003e\n    \u003cli\u003eMaximum input power: 1,800 mW\u003c\/li\u003e\n    \u003cli\u003eWeight: approx. 370 g (without cable)\u003c\/li\u003e\n    \u003cli\u003eHousing: solid matte black walnut + machined aluminium\u003c\/li\u003e\n    \u003cli\u003eEarpads: low-resilience urethane foam + high-grade synthetic leather\u003c\/li\u003e\n    \u003cli\u003eCable connector: 2-pin, rhodium-plated on gold-plated base (Y-type, dual-sided routing)\u003c\/li\u003e\n    \u003cli\u003eInternal wiring: 7N OFC\u003c\/li\u003e\n    \u003cli\u003eIncluded cable: 3 m, 7N OFC, 6.3mm gold-plated plug\u003c\/li\u003e\n    \u003cli\u003eBalanced cable: XLR ET-H3.0N7BL (sold separately)\u003c\/li\u003e\n    \u003cli\u003eAccessories: synthetic leather carrying pouch\u003c\/li\u003e\n    \u003cli\u003eManufacturing: hand-assembled in Japan\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOSTEX","offers":[{"title":"Default Title","offer_id":53693020012881,"sku":"59518","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FostexTH8081.jpg?v=1778412497"},{"product_id":"fostex-th818","title":"Fostex TH818","description":"\u003cdiv lang=\"en\"\u003e\n  \u003cp\u003e\u003cstrong\u003eFostex TH818\u003c\/strong\u003e is an open-back over-ear headphone with a solid acacia wood housing, positioned as the new standard model in Fostex's premium line — one step below the TH919 flagship with its Japanese-lacquered maple housing. Every component except the housing is identical to the TH919: the 50mm BioDyna driver with an updated voice coil and reinforced diaphragm surround, magnesium alloy chassis, dual-density urethane foam earpads covered in silk protein synthetic leather, and a natural sheepskin headband. The open-back design delivers a wide soundstage and natural timbre at the expense of isolation — TH818 is aimed at reference listening in quiet studio or home environments.\u003c\/p\u003e\n\n  \u003ch3\u003eUpdated BioDyna driver: lower bass distortion with TH919-level resolution\u003c\/h3\u003e\n  \u003cp\u003eThe 50mm BioDyna transducer in the TH818 is a revised version of the TH919's unit — differentiated by a new voice coil and a reinforced diaphragm surround, which Fostex states reduces distortion and muddiness in the bass range while fully preserving the flagship's resolution and character. The diaphragm combines bio-cellulose fiber with other fibers at optimal ratios for simultaneous low specific gravity, high Young's modulus, and high internal damping — resulting in fast transient response and an extended frequency range. The 12.5 Hz to 40,000 Hz reproduction range reaches well into the ultrasonic region, ensuring harmonics far beyond the audible band are accurately reproduced. At 25 Ω impedance and 100 dB\/mW sensitivity, the TH818 will run from a portable headphone amplifier, but maximum power handling of 1,800 mW means the transducer is engineered for high-output desktop amps where its full dynamic range becomes accessible. The solid acacia wood housing — a material used in guitars and ukuleles for its resonant properties — shows natural variation in grain, texture, and color between individual units, with no effect on acoustic performance.\u003c\/p\u003e\n\n  \u003ch3\u003eMaterials and ergonomics: magnesium alloy, sheepskin and dual-density foam\u003c\/h3\u003e\n  \u003cp\u003eThe headband and yoke assembly are constructed from magnesium alloy, reducing weight by approximately 20% compared to previous models in this class — TH818 weighs 385 g. The headband pad is covered in natural sheepskin leather. Earpads are built from dual-density urethane foam covered in silk protein synthetic leather — a material softer and more peel-resistant than standard PU, with a more natural feel against skin during extended sessions. Included: 3.5mm detachable cable with 7N oxygen-free copper conductors and a 6.3mm adapter. Balanced operation requires the separately available XLR cable (ET-H3.0N7BL). The detachable cable connector uses rhodium-plated contacts.\u003c\/p\u003e\n\n  \u003ch3\u003eKEY FEATURES\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eOpen-back over-ear design — wide soundstage, natural timbre, no environmental isolation\u003c\/li\u003e\n    \u003cli\u003e50mm BioDyna driver: bio-cellulose diaphragm, updated voice coil, reinforced surround, 1.5 T magnetic flux density\u003c\/li\u003e\n    \u003cli\u003eAll components except housing identical to flagship TH919\u003c\/li\u003e\n    \u003cli\u003eSolid acacia wood housing — natural grain variation between individual units\u003c\/li\u003e\n    \u003cli\u003eMagnesium alloy headband and yoke: approx. 20% weight reduction vs. previous generation\u003c\/li\u003e\n    \u003cli\u003eEarpads: dual-density urethane foam + silk protein synthetic leather\u003c\/li\u003e\n    \u003cli\u003eHeadband pad: natural sheepskin leather\u003c\/li\u003e\n    \u003cli\u003eDetachable cable: 3.5mm \/ 7N OFC + 6.3mm adapter included\u003c\/li\u003e\n    \u003cli\u003eBalanced XLR connection supported via ET-H3.0N7BL cable (sold separately)\u003c\/li\u003e\n    \u003cli\u003eDetachable connector with rhodium-plated contacts\u003c\/li\u003e\n    \u003cli\u003eManufactured in Japan\u003c\/li\u003e\n  \u003c\/ul\u003e\n\n  \u003ch3\u003eTECHNICAL SPECIFICATIONS\u003c\/h3\u003e\n  \u003cul\u003e\n    \u003cli\u003eType: open-back, over-ear\u003c\/li\u003e\n    \u003cli\u003eDriver: 50mm BioDyna (bio-cellulose + composite fibers), 1.5 T magnetic flux density\u003c\/li\u003e\n    \u003cli\u003eFrequency response: 12.5 Hz – 40,000 Hz\u003c\/li\u003e\n    \u003cli\u003eImpedance: 25 Ω\u003c\/li\u003e\n    \u003cli\u003eSensitivity: 100 dB\/mW\u003c\/li\u003e\n    \u003cli\u003eMaximum input power: 1,800 mW\u003c\/li\u003e\n    \u003cli\u003eWeight: 385 g (without cable)\u003c\/li\u003e\n    \u003cli\u003eHousing: solid acacia wood\u003c\/li\u003e\n    \u003cli\u003eHeadband \/ yoke: magnesium alloy\u003c\/li\u003e\n    \u003cli\u003eEarpads: dual-density urethane foam + silk protein synthetic leather\u003c\/li\u003e\n    \u003cli\u003eHeadband pad: natural sheepskin leather\u003c\/li\u003e\n    \u003cli\u003eIncluded cable: 3.5mm, 7N OFC + 6.3mm adapter\u003c\/li\u003e\n    \u003cli\u003eBalanced cable: XLR ET-H3.0N7BL (sold separately)\u003c\/li\u003e\n    \u003cli\u003eCable connector: detachable, rhodium-plated contacts\u003c\/li\u003e\n    \u003cli\u003eAvailability: from late April 2026\u003c\/li\u003e\n  \u003c\/ul\u003e\n\u003c\/div\u003e","brand":"FOSTEX","offers":[{"title":"Default Title","offer_id":53693023420753,"sku":"59502","price":0.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/8741\/0769\/files\/FostexTH8181.jpg?v=1778412474"}],"url":"https:\/\/wrdtunes.com\/collections\/open-back-headphones.oembed","provider":"Wired Tunes","version":"1.0","type":"link"}